TS3694 an error message showed after verifying updates: error phone could not be updated code 6. What to do?

After backing up and updating phone top window showed updated verified commplete.
then it displayed a message sayng phone could not be updatede error 6.
Please help.

http://support.apple.com/kb/TS3694#error6
Errors related to third-party security software
Error 2, 4 (or -4), 6, 1000, 9006
Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
There may be third-party software that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your registry. Your default packet size being set incorrectly can cause these errors. Contact the manufacturer of the software that installed the packet size modification for assistance or follow this article by Microsoft: How to reset Internet Protocol (TCP/IP).
Verify that access to ports 80 and 443 are allowed on your network.
Verify that communication to albert.apple.com or photos.apple.com is not blocked by a firewall, or other Internet security setting.
Discard the .ipsw file, open iTunes and attempt to download the update again. See the steps underAdvanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations.
Restore your device while connected to a different network.
Restore using a different computer.

Similar Messages

TS3694 when doing a restore to try and solve a wifi problem with my iphone 5 i got past the point where the software was extracted from my phone but then an error message came up saying that the phone could not be restored because of an unknown error (301

when attempting a restore, as suggested, to try and fix a week wifi signal on my iphone 5 I got past the point where the sopftware was extracted from my phone but then an error message appeared saying that the phone could not be restored becase of an unknown error (3014). I have tried about 20 times to make it work after trying a number of suggestions I have seen online. My phone gives me know response accept showing a picture of the cable and the itunes symble an the screen permanently - please help

Hello JD_NINJA,
Thanks for using Apple Support Communities.
Error 9006 when restoring your iOS device indicates that there is security software on your computer which is preventing connection to the Apple server or your device. To troubleshoot this issue please follow the directions below.
Check your security software
Related errors: 2, 4, 6, 9, 1611, 9006. Sometimes security software can stop your device from communicating with either the Apple update server or with your device.
Check your security software and settings to make sure that they aren't blocking a connection to the Apple servers.
Get help with iOS update and restore errors - Apple Support
When restoring your iPhone, please make sure to follow the directions in the link below to properly restore.
Restore your device from an iCloud or iTunes backup - Apple Support
Take care,
Alex H.

During Iphone synch error" phone could not finish synched

"phone could not finish synch"message during synch

There is a program called ibackupbot for your computer. The free version of that let's you view the backup file contained in iTunes and you should be able to look at the note. If you pay for the program you can import just the note to your phone

I started the newest update for my phone but when it started installing it to the phone, a error message showed up and now my phone is stuck in recovery mode and itunes wont recognize it. what do i do?

started the newest update for my phone but when it started installing it to the phone, a error message showed up and now my phone is stuck in recovery mode and itunes wont recognize it. what do i do?

Any numbers or other details on the mesages given?
Did you try to connect in recovery mode again? iOS: Unable to update or restore
In case your network connection timed out, check your security software settings: iTunes for Windows: Troubleshooting security software issues

HT201407 "Your iPhone could not be activated because the activation server is temporarily unavailable." this massage showing after i update through itune

"Your iPhone could not be activated because the activation server is temporarily unavailable." this massage showing after i update through itune

See this discussion.
https://discussions.apple.com/message/21189708

Does anyone have corrective advice for me to follow? In attempting to update the iPhone to the iOS6 today (from iOS5.1), I received the following error message: The iPhone "[my name]'s iPhone" could not be updated. An unknown error occured (-1). Thanks, A

Hi everyone
Does anyone have corrective advice for me to follow please?
In attempting to update the iPhone to the iOS6 today (from iOS5.1), I received the following error message:
The iPhone "[my name]'s iPhone" could not be updated. An unknown error occured (-1).
Thanks,
tooborac1

Error 1 or -1
This may indicate a hardware issue with your device. Follow Troubleshooting security software issues, and restore your device on a different known-good computer. If the errors persist on another computer, the device may need service.

HT4623 update process fails with the following message "Unable to Verify Update. iOS 6.1 failed verification because you are no longer connected Internet."

my iphone 5 is connected to a wi-fi network and i'm able to browse the web and receive emails. however when i try to update the software the process fails with the following message "Unable to Verify Update. iOS 6.1 failed verification because you are no longer connected Internet." It gives an open to "Close" or "Try again", but the retry is also unsuccessful.

Try to connect to secure web site. If you can't, that would mean that your iphone is unable to authenticate itself to apple servers in order to download update. If you can - I would still guess same but with less certainty and suggest to update on another network.

Decided to update Ipad Mini 2 on IOS 7.1. , After removing ITunes software writes, could not restore Ipad. An unknown error occurred (3004). Help please!

Decided to update Ipad Mini 2 on IOS 7.1. , After removing ITunes software writes, could not restore Ipad. An unknown error occurred (3004). Help please!
Ipad mini 2. update from ios 7.0.6 to ios 7.1

See if this troubleshooting page helps : http://support.apple.com/kb/ts4451

I cant re-store my iPhone through the iTunes. Message which comes up says' the iPhonw could not be restored. An unknown error occurred (21). i tried all the options and nothing seems working. please help

I cant re-store my iPhone through the iTunes. Message which comes up says' the iPhonw could not be restored. An unknown error occurred (21). i tried all the options and nothing seems working. please help

Hi chiekoo,
Thanks for using Apple Support Communities.
For more information on this, take a look at this article:
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/ts3694#error21
Error 20, 21, 23, 26, 28, 29, 34, 36, 37, 40
These errors typically occur when security software interferes with the restore and update process. FollowTroubleshooting security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.
Also, check your hosts file to verify that it's not blocking iTunes from communicating with the update server. See iTunes: Advanced iTunes Store troubleshooting—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > Mac OS X > The hosts file may also be blocking the iTunes Store. If you have software used to perform unauthorized modifications to the iOS device, uninstall this software prior to editing the hosts file to prevent that software from automatically modifying the hosts file again on restart.
Best of luck,
Mario

Nokia Software Updater -- Error 1402.Could not ope...

H,
When I try to install the Software Updater for the first time to update my Nokia 6500c phone, I receive the following error message about 57% during the install process. I checked my permission keys in the registry, and they seem to have all the correct Admin permission.
Any suggestions?
Product: Nokia Software Updater -- Error 1402.Could not open key: HKEY_LOCAL_MACHINE\Software\Classes\Msxml2.DSOControl.4.0\CLSID. System error 5. Verify that you have sufficient access to that key, or contact your support personnel.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Thanks.
Matt

Hi,
It looks like you do not have access to the registry key mentioned i.e. HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Current Version\Run\Optional Components\IMAIL.
This might be due to the fact that you may not be added to the Administrators group or the registry key has been denied access explicitly to a group that you may be part of.
People in my network setup were facing the same issue, and we fixed the same using Microsoft's "subinacl" tool. You can follow the below mentioned steps to rectify your issue as well:
1. Download Microsoft's SubinACL tool from http://www.microsoft.com/downloads/details.aspx?FamilyID=e8ba3e56-d8fe -4a91-93cf-ed6985e3927b&displaylang=en
2. Install the same by double clicking on the "subinacl.msi" just downloaded.
3. Open Command Prompt window through the Run Dialog Box (Start -> Run and type "cmd" and click OK)
4. In the Command Prompt window, type in the following commands:
i. cd /d "%ProgramFiles%\Windows Resource Kits\Tools" (Hit Enter)
ii. subinacl /subkeyreg HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run\Opti onalComponents /grant=administrators=f /grant=SYSTEM=f /grant=USERS=f /grant="Creator Owner"=f (Hit Enter)
You should see some processes happening on your screen. After the process ends, retry the update operation you were originally trying to perform. Hopefully, it should succeed now.

Why is that my phone could not activate after updating a software?

why is that my phone could not activate after updating a software?

givenfor wrote:
why is that my phone could not activate after updating a software?
Since we don't have a crystal ball, its very hard for anyone to tell you why it might not activate if you don't provide details...
What happens when you try? What error message do you get? Was the phone previously jailbroken or unlocked?

HT2404 Already purchase and sign. Lost internet data...aaaahh... .error - "We could not complete your purchase.The product distribution file could not be verified. It may be damaged or was not signed".

Already purchase and sign. Lost internet data...aaaahh... .error - "We could not complete your purchase.The product distribution file could not be verified. It may be damaged or was not signed".

Update: i spoke to a very knowledgeable applecare representitive who walked me thrue the process, we were trying to figure out what exactly was preventing Mountain Lion from installing & (after a process of elimination) it turns out you need to be log in as an Admin to download it, we also made sure everything was up-to-date. Downloading Mountain Lion took about 40 minutes (with roadrunner high speed internet, DSL might be a bit slower) once it was downloaded the installation process was very intuititive with just a few clicks and about 35 minutes i had the latest Operating System.

HT2693 after syncronization with my pc both pc and iphone are showing that phone could not be activated, because there is no sim in the slot

Sir, Yesterday night i was syncronized my iphone 3gs with my pc. after that operation my phone will not be activated showing error as cound not be activated because sim was not installed. but already I was inserted my sim in it. The phone is connected to my Pc and with my WiFi also. Plz help me to activate it

Not sure what this has to do with Apple TV.
Also this is a user forum, no one here can help with that. I would contact your carrier.

I can not download the new version of Firefox. I keep getting a message that says "Firefox 5.0.1dmg could not be opened, because an unknown error occurred" HOW do I fix this?

Every time I try to download the new version it just says I can not download the new version of Firefox. I keep getting a message that says "Firefox 5.0.1dmg could not be opened, because an unknown error occurred - Try saving to disk first and then opening the file"

If you have problems with updating or with the permissions then easiest is to download the full version and trash the currently installed version to do a clean install of the new version.
Download a new copy of the Firefox program and save the DMG file to the desktop
* Firefox 5.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Trash the current Firefox application to do a clean (re-)install
* Install the new version that you have downloaded
Your profile data is stored elsewhere in the Firefox Profile Folder, so you won't lose your bookmarks and other personal data.
* http://kb.mozillazine.org/Profile_folder_-_Firefox

Hi, just tried to upgrade to 11.2 but now when I try to open itunes I get an error message saying "the procedure entry point ADiAdID_acquirematchslotifnecessary could not be located in the dynamic link library iAdCore.dll". Any suggestions?

Hi, just tried to upgrade to 11.2 but now when I try to open itunes I get an error message saying "the procedure entry point ADiAdID_acquirematchslotifnecessary could not be located in the dynamic link library iAdCore.dll". Any suggestions for a non techy person?

See Troubleshooting issues with iTunes for Windows updates.
Try the repair tip in the third box first.
tt2

TS3694 an error message showed after verifying updates: error phone could not be updated code 6. What to do?

Similar Messages

Maybe you are looking for