TS3694 upgrade from 4.3.3 to 5.1.1 b208 gives an error " the iphone could not be updated because the firmware is not compatible"

I recieved an error while trying to update from ios 4.3.3 to 5.1.1 b208 the error:" the iphone could not be updated because the firmware file is not compatible"

This often happens when iTunes is not up to date.  Try updating iTunes to the latest version, then try updating your phone again.

Similar Messages

  • My Iphone 4 crashed and I lost my entire contact list. I restored it to original factory settings but in trying to restore my data from my laptop via Itunes.. this was the feedback: Itunes could not restore the Iphone Dr Johnny Siu Chong because the Iphon

    My Iphone 4 crashed and I lost my entire contact list. I restored it to original factory settings but in trying to restore my data from my laptop via Itunes.. this was the feedback: Itunes could not restore the Iphone Dr Johnny Siu Chong because the Iphone refused the request.
    I cannot get help from Apple support because i am being asked to supply the serial number which is stored on the phone and I cannot restore my data in the first place. I am reluctant to "Set up as a new Iphone" since I don't know whether if I do I  may not then be able to access my data from Itunes...
    Please advise what to do. I did not see any tutorials on Youtube to help me with this.
    I look forward to an early response.

    Hey joshuafromisr,
    If you resintall iTunes, it should fix the issue. The following document will go over how to remove iTunes fully and then reinstall. Depending on what version of Windows you're running you'll either follow the directions here:
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    http://support.apple.com/kb/HT1925
    or here:
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    http://support.apple.com/kb/HT1923
    Best,
    David

  • I am unable to upgrade iphoto 8.12 to access photo streaming.  It gives an error message when I try to update

    Icloud shows photo stream not available since it states it needs Iphoto update required
    I go to Learn More next to the message
    It brings me to : Support/apple.com/kb/ht4906  iPhoto and Aperture: using Photo stream
    "IF YOU ARE USING AND EARLIER VERSION OF IPHOTO 9"
    There is a link to Mac App Store for update
    It brings me to iphoto:  Are you sure you want to subscribe to this photo feed?  I hit Subscribe
    A popup comes up: 
    There is a problem with the subscription
    Request to the server Macappstore://showUpdatespage failed.  
    I hit Ok (my only choice)
    And I am at iphoto. 
    What is the fix?
    I have spent many hours.

    If you have iPhoto 8.x and want to access photostreaming, you need to buy iPhoto 9 from the App store or buy the iLife '11 package. Have you already purchased iPhoto 9 from the App store?

  • Since upgrading to FireFox 6 I cannot run Firefox in Avast Sandbox - get error "This application has failed to start because xul.dll was not found". Firefox works fine outside Avast Sandbox.

    The error box is entitled
    firefox.exe - Unable To Locate Component.
    It suggests re-installing may fix the problem but I've un-installed and re-installed firefox a number of times and no change.

    Download a fresh Firefox copy and save the file to the desktop.
    * Firefox 6.0.x: http://www.mozilla.com/en-US/firefox/all.html
    * Uninstall your current Firefox version.
    * Do not remove personal data when you uninstall the current version.
    Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
    * It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    Your bookmarks and other profile data are stored elsewhere in the Firefox Profile Folder and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.

  • TS3694 trying to update to ios5,the iphone could not be updated because the firmware file is not compatible

    I am receiving this error message repeatedly, but it doesnt feature in any of the error code or message lists.
    I have completed all the steps such as updating itunes, removing any other
    USB devices, rebooting etc
    Can anyone tell me what the error message means and how to get it sorted? Thanks!

    Are you sure your phone is a 3GS and not a 3G?   3G IPhone cannot be updated any higher than iOS 4.2.1 and this might be the reason why you are getting the not compatible error.

  • TS3694 it says the phone could not be updated because the firmwear file is not compatible

    cant update the phone says firmware file is not compatible.  Any sugestions

    Update iTunes to latest version for your operating system and try again.

  • HT1338 I want to sync my calendars from my IPhone (3G) but the Iphone dosn't show up on the left hand  side of ITunes (only comes on in IPhotos). I have upgraded my MAC OS to 10.6.3 but now it says ITunes latest version can only work on later version of O

    I want to sync my claendars from my IPhone 3 G to my IMac which I have just upgraded to version 10.6.3
    the IPhone doesn't show up on the left hand side of ITunes when I open it.
    It opens in IPhoto though.
    Do I have to upgrade my operating system even further on my computer or is it the phone.
    Driving me crazy. Just don't want to lose my calendars that I have on my phone.
    Help?
    thank you,
    Kathryn from San Anselmo

    You need to update to 10.6.8 using Software Update.

  • Migrated Aperture 3 upgrade from old Mac Book Pro to new Mac Book Pro.  Can't open Aperture on new machine because I don't have the original serial number for Aperture 2 program originally installed on the old machine.  What is the best solution to this s

    Migrated Aperture 3 upgrade from old Mac Book Pro to new Mac Book Pro.  Can't open Aperture on new machine because I don't have the original serial number for Aperture 2 program originally installed on the old machine.  What is the best solution to this situation

    Call Apple and make a appointment.
    You have 3 months of care and up to 3 years with paid AppleCare, let them handle it and bring everything in.
    Good Luck

  • 5 crashes after upgrade to ios my address book immediately and I can not access emails, because the password is wrong and when I go to mail settings crashes the application immediately from

    5 crashes after upgrade to ios my address book immediately and I can not access emails, because the password is wrong and when I go to mail settings crashes the application immediately from 

    Same issue also. Occurring both on my iPad 2 and iPhone 4 after upgrading to ios 5
    By the way, Mattban and Sancasslano, are either of you also experiencing any of the following issues:
    * Problems with Contacts either crashing or listing no names
    * Problems with turning iCloud on or off for application under Settings->iCloud... On both mine I just get a pop up saying that iCloud is being turned off but Contacts then just locks up.
    * General problems when trying to synch applications on the iPad or iPhone over iCloud?
    I am wondering if all these issues are in someway related to and whether it is worth trying to turn off iCloud somehow, though I cannot work out how this can be done once set up.

  • Crazy lag issues upgrading from OS 10.58 to OS 10.6, what gives?

    I've just upgraded to OS 10.6 from OS 10.5.8  on my 3.06ghz Intel Core 2 Duo iMac and pretty much everything has slowed down considerably. I've got 4gigs and 800 mhz of memory and my computer was lightning fast running 10.5 so I'm pretty sure that's not the issue.
    My main problem  is that I'm no longer able to "spacebar" preview any files without extremely long lag times. Trying to preview video, music, and .PSD files takes 5 minutes to load in some cases even for a 10mb file. I'm in the process of editing over 200 video clips and this has basically prevented me from using this machine at all.
    Additionally I made the mistake of deleting Quicktime 10 because the interface was horrendous and sticking with Quicktime 7 since I had already purchased a pro code for it. Even though Quicktime 7 is still on my computer all of my audio and video files are now opening in the "Grapher" utility by default, which is extremely annoying and ridiculous. How can I make Quicktime 7 my default again?
    Anyone have any idea what would cause these issues and more importantly what can I do to resolve them?
    Thank you!
    JD

    Try restarting in Safe Mode, this clears some of the caches  it's possible one has become corrupted. You should also Repair Disk Permissions using Disk Utility (Applications - Utilities - Disk Utility) and I'd also recommend doing a SMC reset (maybe even 2) and reset the PRAM.
    SMC RESET
    Shut down the computer.
    Unplug the computer's power cord and all peripherals.
    Press and hold the power button for 5 seconds.
    Release the power button.
    Attach the computers power cable.
    Press the power button to turn on the computer.
    PRAM RESET
    Shut down the computer.
    Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.
    Roger

  • HT1267 While upgrading my iPhone 3 to 4.2 something went wrong and would not start at all. When tried to restore after going through th process it comes up with the message "The iPhone could not be restored. An unknown error occurred [1015]." What can I d

    While upgrading my iPhone 3GS to iOS 4.2 something went wrong and came up with the message "The iPhone could not be restored. An unknown error occurred  [1015]." Now it will not start at all. It just stays on screen with USB and the iTune picture. What can I do to get it going again. I only tried to upgrade because I was prompted to up-grade and now I am helpless. I did a backup before starting the upgrade. The error message did not tell what to do next.  Any help is very much appreciated.

    Usually that means the iPhone was hacked to unlock it from the original
    carrier .
    Updating the operating system locks it back to that original carrier
    You could try this
    http://support.apple.com/kb/TS3281
    However if the iPhone was hacked it is probably a paper weight  now
    and as this is an Apple hosted forum  you can get no further help here

  • TS3694 i just received error number 6 while trying to update to the new ios7

    I just received error number 6 while trying to update to the new ios7. How do I fix this?

    3194?
    http://support.apple.com/kb/TS3694#error3194
    Error 1004, 1013, 1638, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
    Install the latest version of iTunes.
    Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
    Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. Follow iTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to a default hosts file. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
    Try to restore from another known-good computer and network.
    If the errors persist on another computer, the device may need service.

  • Hello i have an iphone 4 its stuck in the apple loop. when ever i unplug it from the computer it shuts down and when i plug it in it shows me on itunes its in recovery mood and every time i click restore i get this error the iPhone could not be restored.

    hello i have an iphone 4 its stuck in the apple loop. when ever i unplug it from the computer it shuts down and when i plug it in it shows me on itunes its in recovery mood and every time i click restore i get this error the iPhone could not be restored.an unknown error accurred (2001)

    Error 1 or -1
    This may indicate a hardware issue with your device. Follow Troubleshooting security software issues, and restore your device on a different known-good computer. If the errors persist on another computer, the device may need service.
    http://support.apple.com/kb/TS3694#error1

  • I have a 5 year old MacBook running OS X v10.5.8  Of course Apple does not provide an OS update and then other software apps won't update because the OS is obsolete. Is there a way of upgrading the hardware so the software can be made current?

    I have a 5 year old MacBook running OS X v10.5.8  Of course Apple does not provide an OS update and then other software apps won't update because the OS is obsolete. Is there a way of upgrading the hardware so the software can be made current?

    10.6.8 Combo Updater
    The 2 places I’ve seen recommended most to buy reliable RAM are below. I have purchased RAM several times from Other World Computing and have always been very satisfied with the product and service. They have on-line instructions on how to replace the RAM. OWC has also tested RAM above what Apple states is the maximum. I now have 6GB installed on a early 2008 iMac supposedly limited to 4 GB and noticed an improvement.
    Crucial
    Other World Computing

  • Trying to delete file from trash but get this: The operation can't be completed because the item "File name" is in use. All other files delete except this one. Please help

    Trying to delete file from trash but get this: The operation can’t be completed because the item “File name” is in use. All other files delete except this one. Please help

    Maybe some help here:
    http://osxdaily.com/2012/07/19/force-empty-trash-in-mac-os-x-when-file-is-locked -or-in-use//

Maybe you are looking for

  • Error while importing CTL FILE?

    Hi I am using Oracle 9i to Import Data from a disk file to the table in the database. Here are the CTL File and .Dat file i am using to import data to the database. Book1.CTL load data infile 'E:\Oracle\ORADATA\oracle9\SAMPLEDATA.DAT' "str '|\n'" int

  • Terms of payment - how to cover my business scenario

    Dear experts, I am dealing with the following business scenario. A Sales rep proposes to the client a term of payment made up od several partial amount; for example let assume 3 partial amounts. The Rep proposes to the client a fixed date, representi

  • Embedding Crystal report in Form builder

    Hi, I want to call Crystal report 8.5 rpt files from my form builder application(6i) using activex component. But i don't know how to set properties programatically. Could any one can tell me were i could found this document. pls help me to sove this

  • BADI for GR boxes on PO

    Is there a BADI that can automatically check the GR boxes on the PO if the line item is over a certain amount? We have the boxes automatically checked as a part of workflow.  But, if the user goes into the PO and changes the account assignment catego

  • EAP/TLS authentication Issue

    I have several Aironet 1100 AP's which are configure to use EAP/TLS to authenticate against a Cisco ACS server. We are using Aironet 350 pcmcia cards. This setup had been working up until friday when we moved the ACS server to a new IP address. Since