TS4057 dating or showing up uMotion 5 and Final Cut X aren't updating or showing up under the 'Purchased' Tab. What do I do?

Motion 5 and Final Cut X aren't updating or showing up under the 'Purchased' Tab. What do I do?
I am running OS X Mountain Lion on a 13-inch MacBook Pro Mid 2010 model.
Thanks.

Thanks one again. I know you helped me the last to. I do have the Deja Vu font set in my folder. I downloaded and the last time. So I don't know if there is supposed to be more or not, but those were installed with Windows-XP after my reformat.
This is really driving me nuts. as I've done several re-formats on my computer and several friends computers and even upgraded hardware so I am not necessarily a software or programming expert, I am somewhat advanced when it comes to computers in general and can usually diagnose the problem but these font's are the problem and they never were before.
I did see in another forum that if you had a Dell Computer and did the Microsoft update for the onboard video card driver that it could be the culprit, but I have that disabled being I have a much better graphics card so the updates from Microsoft for the onboard video weren't installed.
It' a Dell Dimension 3000 with an Intel(R) 82865G Graphics Controller so I don't believe it is the culprit being it is disabled. The actual video card that I am using is a PCI Nvidia GeForce 9400 GT with 1 GB Memory. And I didn't have any problem before.
I appreciate the help. But still can't get things to work. Live Help Chat doesn't open for another two hours so maybe they can do "Remote Access" or something and can check setting and help me. But if you come up with other suggestions, they would be greatly appreciated.
Thanks again.
Susan

Similar Messages

HDC-SD9, iMovie 7.1.2, QuickTime 7.5, and Final Cut Pro

After I read the post, I tested it on my Mac. I can safely say that I can import videos from HDC-SD9 using iMovie and Final Cut Pro now.
Update to QuickTime 7.5 and iMovie 7.1.2 to make this camera work with the Mac.
It seems to be working with Final Cut Pro too.
source:
http://37prime.com/news/?p=160

That sounds promising! I will install the update tonight and let you know if the same goes for me!

Final Cut Express HD 3.5 and Final Cut Pro Studio 5.1.1

Hi,
I have a client with both of these installed on the same machine (running 10.4.6).
When they try and launch either application, the splash screen comes up, loading various filters, etc. then they get an error message:
"File Error: A file of this name already exists" "OK"
Clicking "OK" closes the app.
Any idea:
1. What the file in question is?
2. Can it be deleted to let the app run?
3. Can Final Cut Express HD 3.5 and Final Cut Pro Studio 5.1.1 be used on the same machine?
I'll post this on the Final Cut Pro thread too (but with the order reversed).

1. No idea.
2. Depends what the file is.
3. Yes. Though I've never tried to run them at the same time.

Final Cut Server 1.x and Final Cut Pro 7

Are there any compatibility issues with Final Cut Pro 7 (Final Cut Studio (2009) and Final Cut Server 1.x?

FCSvr 1.5 has the ability to process FCP 7 project files and well as leverage ProRes Proxy Edit Proxy workflows.
FCSvr 1.5 is recommended for FCP 7.
I've heard about problem with FCSvr 1.1.1 and FCP 7.
Are you experiencing anything in particular?
Let me know
Nicholas Stokes
XPlatform Consulting

Final Cut Pro Studio 5.1.1 and Final Cut Express HD 3.5

Hi,
I have a client with both of these installed on the same machine (running 10.4.6).
When they try and launch either application, the splash screen comes up, loading various filters, etc. then they get an error message:
"File Error: A file of this name already exists" "OK"
Clicking "OK" closes the app.
Any idea:
1. What the file in question is?
2. Can it be deleted to let the app run?
3. Can Final Cut Pro Studio 5.1.1 and Final Cut Express HD 3.5 be used on the same machine?
I'll post this on the Final Cut Express HD 3.5 thread too (but with the order reversed).

What you did was not enough to delete the preferences properly.
This article tells you how. It is for FCE2 but works the same for FCE3 so I assume it is also OK for FCE 3.5:-
http://docs.info.apple.com/article.html?artnum=93690
It's simple to do so try it before reinstalling etc. - You should completely uninstall before reinstalling:-
http://docs.info.apple.com/article.html?artnum=301182
Ian.

New Soundtrack Pro and Final Cut Pro Updates...

There's new updates for Soundtrack Pro and Final Cut Pro on Software Update.
They seem to have fixed the problem I was having with one of my giant old projects. I used to have to open one of the audio projects before my multitrack project would open, but now it opens just fine. So far so good!

Hi Collings,
Looks like there are two threads about the recent FCP & STP updates, so I'm posting my findings here, too.
I just found another thing that appears to be fixed in STP 1.0.2:
Batch normalize is working:
I have a bunch of aif files that I want to normalize. I opened one in the waveform editor, applied process->normalize (level=0dB), then selected File->Save as Applescript--this creates an Applescript droplet. Then I can then grab a whole bunch of audio files and drop them all onto this droplet and they all get normalized correctly. This is a huge timesaver for me. Before this update, using this approach to batch-normalize a set of files seemed to deliver unpredictable results, but I just ran a whole set of files through, and they all played back with a peak level of 0dB (and no clipping).
Here are the other things that I've noticed so far with STP 1.0.2:
Automation:
-In STP 1.0.1, Automation was not applied correctly on project sample rates that were not supported by the hardware (e.g. play a 96K project on a laptop built-in 48K audio interface and the automation was late by 2X) -- this is fixed!!! YAY!
-STP 1.0.1 did not handle long automation ramps across long periods of silence (it would sometimes cause a glitch at the start of the clip right after the automation ramp--there is even a support article about this)--it seems like they fixed this one, too.
Sample rate switching:
-I see an option in general preferences to allow me to disable the "Switch hardware sample rate to match document", and with this disabled, I no longer get audible clicks from my audio interface when I switch tabs. Plus, switching tabs seems faster to me.
Realtime effects and automation in audio file projects:
-They've added a warning to inform folks about the need to bounce realtime effects and automation to an action--if you are in an audio file project with realtime effects that have not been bounced to an action and you try to save, you get a warning message.
Has anyone else noticed any other fixes or changes in this update?

HT1338 Final Cut Pro will not update after new os and compressor will not run until the update is done. System shows no updates available

Final Cut Pro will not update after new os and compressor will not run until the update is done. System shows no updates available

Sorry for being unclear.
When I am using the update in the App Store App, there will be a list of various applications that have updates to be installed (Final Cut Pro will be in this list). I will already be logged in with the Apple ID I use for everything (my dev account). I will be able to update all of the other various applications needing updating except for my Final Cut Pro. When I click the update button next to the FCP update, it will give me an error saying "This download is not available for this apple ID either because it was bought by a different user or the item was refunded or cancelled"
I have not had any applications refunded or cancelled and this has only happened since my update to Yosemite. FCP was working fine until the upgrade. Is there anything that can be done to fix this?

ITunes and Final Cut Pro 4.5

Everything was fine: OS 10.3.9. G5, Dual Processor. Final Cut Pro 4.5
Updated both iTunes and QuickTime. Trouble! Longer clips wouldn't capture, batch or any method.
So, I go back to QuickTime 6.5.2. That fixes the problem with capturing video clips.
But now, when I try to import my music library CD, I can't. I can do it through iTunes, import into Final Cut, but when I attempt to place it into the Timeline, it shows me 3 tracks...and the red line, as if they were needing to be rendered.
When I play, I get the "beep, beep, beep."
I am bringing them as AIFF files.
Any help?

You can use QuickTime to convert the CD's audio tracks (AIF, 44.1khz, 16 bit) into AIF, 48khz, 16 bit.
If you want to use iTunes for this, set the correct audio sampling rate (48khz) in iTunes' preferences.
-DH

Itunes and final cut

I'm trying to make a photo slide show for a family reunion we had. I downloaded a few songs from itunes to use, and final cut won't let me lay it in the timeline, saying I need to open in itunes. I tried to save it as a quicktime movie and I get the same error.
How do I bring in songs from itunes into final cut so I can make a christmas dvd for the family?

dgam:
If it had a + sign in front of the $0.99 download price,
you can use it in final cut. If it does not have the + sign
you are out of luck. You will have to download it from another
source.
Hope this helps.
Russ Andris

Fonts and Final Cut Pro

Hello,
A while back I posted a thread asking about using the font manager "Suitecase" and Final Cut Pro. It was clear that Suitecase should not be used with Final Cut. I work at an ad agency and we have a database of 4000 fonts. Does anyone know of a good font managing program that plays well with Final Cut? Using the standard font manager that comes with an Apple computer is not an option. Also, using Borris 3D is also not the answer because of the time it takes to create and make changes to a slate. Help me!
Thanks in advance.
-Amber

Any font management program should make fonts available to your system and all the apps in the same way, right? What's so bad about Font Book anyway? I was so relieved not to have to deal with Suitcase and /or Font Reserve once I got on OS X. I can see all my fonts, turn them on and off, it's easy to look for special characters, arrange the fonts in different collections, etc.
I agree that it makes me miserable to have to open the Boris Generators' type controls every time I want to make a change, and then not be able to preview my changes while I am working. Also, there is no way to duplicate a Boris generator and edit it and have it show up in the same position on the screen. If only they could simply give you an anchor/origin point for the text that acutally related to the alignment of the text object, as any normal, thinking person would expect. Also, try this one, copy and paste several copies of a Boris Generator in a sequence, put different text in each one, and try changing the alignment of just one of them, now notice that evey other generator in your entire sequence will automatically change its alignment as well. You could try to solve this by making the clips independent, but, oh wait, that's right, YOU CAN'T! Ha! jokes on you. Now please start over by recreating each of your Boris type objects from scratch. WHEE! (acutally, the method here is to format one and then drag it to your browser and reuse it from there, but don't copy and paste a Boris generator, ever.)
Add to this the way that these objects will randomly disappear or use vestigal render files when you export or encode mpeg-2, but never when previewing the timeline, and the way that Boris will render any project that uses a Boris generator unopenable if you replace your system Helvetica with the Adobe version, and you'll wind up with a lot less hair at the end of your day.
All that said, I use it all the time, and grit my teeth in frustration the whole way as I re-create, replace, re-format, troubleshoot, and double and triple check evey second of my work every step of the way, and re-encode, and reformat again, and troubleshoot some more.
If I have lots of lower 3rds or IDs to do, where I want them to come up in the same position on the screen, I find FCP's generic type generator works ok, as long as you never move the generator clip from 0,0 in the motion tab. The generator only converts the font to pixels once, and moving the resulting clip resample the video image of the type instead of regenerating the type from the font in te new position, which means that if you drag the clip to a new position in the canvas in wireframe mode, it will look blurry, always. Use the origin crosshairs in the type controls instead. Of course, the only generator that allows you to do this is the one that does not allow you to have multiple fonts, sizes, or style in a single object. The one thing I use type generators for most often is to make a lower 3rd template for use throughout a long program that will always occupy the same position on the screen each time I use it, and I wish I could use two different sizes in one object. I can't believe that this is the one thing that is impossible in FCP.
Another thing about the FCP type generators is that they do not support font families at all. Try Univers, for instance, and you'll notice that instead of 45 Light, 55 regular, and 65 Bold, you have Plain, Italic, Bold, and Bold/Italic. Notice also that if you choose Plain, you get italic. Fun! The way this appears to work is that, within a certain family of fonts, FCP will take the first four that it sees and assign them to Plain, Bold, etc., in the alphebetical order that the source files would appear in the finder (acutally I think there is an even more arcane, less logical method it uses to pick these styles, but I have never been able to figure it out).
These three issues, no character-specific formatting, quality loss if the clip is repositioned, and the inability to support font families, have never been resolved since FCP 1.0 - the tool remains essentially unchanged. Perhaps they figure that anyone who really cares enough about their project never uses it anyway, so why bother fixing it? But I acutally do use it with fairly good results, just never move the clip from 0,0, and if I need to use Univers 65 Bold, I just turn off all the other Univers families to force FCP to recognize 65 bold as "Plain".
ok, font rant over, we now return you to our regularly scheduled programming.

HT4740 How can I avoid or solve the problem of Final Cut Pro crashes when trying to Show Events Library?

When I try to Show Events Library in Final Cut Pro, it crashes each time. Please tell me how do I work around this problem?

Try creating a new (temporary) folder and putting all your events in there - then launch FCP X.
If you can open the Browser, then it's possible one or more of the clips in one of your events is corrupt. Close the app and move the events back into their original places one by one (re-starting FCP X each time). This will help you find the event which has the corrupt file in it.
If isolating the events has no effect, I suggest you trash your preferences.
Unexplained faults like this can often be fixed by clearing out FCP X's preferences (for some reason, they get knotted up from time to time).
Download Digital Rebellion's Preference Manager (free, simple to use, and perfectly safe, both to download and use).
http://www.digitalrebellion.com/prefman/
With Preference Manager, you can backup the Prefs when FCP X (or any of the Apple Professional Applications) are working normally. Then when either of the applications are acting strangely, Trash the Preferences, then Restore from your backups (just a mouse-click).
If you trash the prefs and don't restore them, you will need to manually restore all your FCP X settings again, so it's a great idea to backup Preferences from time to time when FCP X is working well, then your backups are up to date.
Doesn't fix every problem, but it fixes a lot.
Andy

AVCHD, Panasonic SD9, and Final Cut Pro FRAME RATE! crashing!

Ok - I am still getting nowhere with hidef - esp AVCHD!
I purchased a brand new iMac, totally spec'd out, AND Final Cut Studio YESTERDAY.
I am trying to import AVCHD files - to no avail - crashes FCP.
I tried the work-around of using Voltaic, which converts to the AIC, and when I import THOSE files the video shows as 10fps. I cannot seem to get the correct settings to get the video to play back up to speed. The audio sounds correct, but the video is in slow motion. Can someone help me figure out how to use $3,300 of a new computer and software -that I bought in order to use a $800 camera? Am I crazy or what?
ALSO, iMovie 08 will NOT run AVCHD files - OR convert them, I tried, and that crashed TOO!
Apple has let me down, even though their tech assistant was very nice on the phone - there is STILL no solution. I cannot use FCP OR iMovie. How ridiculous!
HELP PLEASE!

Thanks for your reply - but Perian 1.1 does not solve it at all - FCP still crashes upon attempting log and transfer..
My system is this: 10.5.2 OS
iMac 2.8 GHz Intel Core 2 Duo
2GB 800 MHz DDR2 SDRAM
And I have TODAY'S latest version of FCP.
Are you using the exact same camera? Or are you confusing it with the Panasonic HDC-SD5? I'm using the SD9 - tech support just sent me this article:
Final Cut Pro, Final Cut Express: Unexpected quit with Panasonic HDC-SD9 AVCHD
Thanks again - I sure wish I could use my 800$ camera and 3,300$ hardware and software!
Best,
Paul

Final Cut Pro 10.1.1, hide/show inspector problems

In Final Cut Pro 10.1.1, my "show" option in the inspector for transform, crop, etc has disappeared. It has "hide" but not "show." I can't open any of the options to adjust the settings. Any ideas?
I've tried running pref manager, house cleaner, I even deleted the app and reinstalled through the app atore.

Yes it let me do that. Sometimes it would show the transform adjustment sliders in the inspector when I altered the media, sometimes not. If it did appear, if you hit hide, it was gone...no "show" to open it back up. I couldn't toggle on/off the skim tool for video or audio or snapping. Not even in the top menu or by hot keys.
Anyway someone advised me on another forum to create a new user with admintrative privileges on my machine, and then try to use FCP X. It worked. Now I guess I just have to give the new user read/ write privileges to the location where all of my previous user materal is. Unless there's some other better work around. I usually edit to external media, but all of my blue chip materials (music, stock footage, logo stuff) is in the movies folder on the old user profile.
I'm guessing that FCP is hiding some sort of preferencence file somewhere that I don't know about, or maybe not many people know about. I used pref manager, house cleaner, and even uninstalled/ reinstalled the app using digial rebellions FCS remover and also using the method provided by apple. Nothing.
Weird. Thanks for trying to help though.
-JOSH

I have garage band ver 10.0.2 and am trying to add effects to an audio track but i have no info button or track info under the track tab. How do i get these things to show up on my program?

I have garage band ver 10.0.2 and am trying to add effects to an audio track but i have no info button or track info under the track tab. How do i get these things to show up on my program?

In GarageBand 10.0.2 you can no longer add all kinds of effects freely; this GarageBand '11 feature has been discontinued. Pick one of the predefined patches that already has the effects you want.
However, you can add effects from the predefined audio units.
You'll see the predefined effects on the track, when you open the Smart Controls. To add audio units, click the button and enlarge the the smart controls pane by dragging the dividing line to the Track Area upwards.

I'm new to working with soundtrack and final cut simultaneously?

I have to edit a documentary in the coming week for a project. I want to use soundtrack pro alongside final cut pro. Could someone put simply the process of the two working together? for audio connected to video clips in final cut, is the only way to automate these with final cut?
using the "send to soundtrack" in final cut, only exports the video so it leaves me only being able to enhance the project by adding new sounds. is it possible to edit the sound files in final cut by using soundtrack pro?
without exporting every sound individually and re-importing...thank you. im new to this so that might be a stupid question. i apologise if so

1. Finish your project in Final Cut with rough sound. Lock your picture.
2. Select your sequence, and "Send to" Soundtrack Pro as a multitrack project.
3. Finish your audio.
4. Export whichever splits you want from Soundtrack as AIFFs. You can export the whole mixed soundtrack, or vox and mix minus, or whatever you prefer.
5. Duplicate your finished sequence in Final Cut. Delete all audio. Import your finished mix(es) into Final Cut, and overwrite-edit them into the timeline.
6. Export your finished movie.
Soundtrack Pro and Final Cut Pro really aren't meant to be used together, per se. Rather, the workflow goes from Final Cut as a multitrack project and then back to Final Cut as AIFFs.

TS4057 dating or showing up uMotion 5 and Final Cut X aren't updating or showing up under the 'Purchased' Tab. What do I do?

Similar Messages

Maybe you are looking for