TS4062 my ipod was unplugged while updating now cant get to music or name of ipod wont show up for syncing

My ipod was unplugged while upgrading..How do I get sync to show up so I can get all my music back on.

I have a similar issue.
Mine shows in iTunes and in PC. It will also allow me to sync.
But when I do sync, it runs fine for about 10 minutes, then I get an error similar to yours with a directory location. It keeps syncing and will periodically show the errors. Then it will lock up.
I have run chkdsk, awindows utility (chkdsk [driver letter]: /R /F) over the iPod when it has been restored and it found nearly 400mb of bad sectors.
I though this would fix the problem but is has not. When I run chkdsk over it again, it does not find anymore bad sectors (it does however tell me that it has 400mb of bad sectors logged.)
I am banging my head against a wall trying to fix this, or even find out what the issue really is. I assume it is a dodgey hard drive, but I do not want to replace it and still have the problem.

Similar Messages

  • IPhone was unplugged during update; now completely unusable, not recognized

    So I was updating to the latest iPhone software through iTunes when somehow, the USB got unplugged. Now, the phone is always off; when I turn it on it just has a picture of a USB cable pointing towards the iTunes logo for a few seconds, and then shuts off again. It's comepletely unusable. When I plug it into the USB port, it is recognized in Windows and the computer and all, but it doesn't appear in iTunes, and the iPhone's screen is the same image as when it is unplugged.
    HELP PLEASE!!!
    No phone + No music = Death.
    =[.
    Thanks in advance!
    --Sarah.

    Try forcing your iPhone into Recovery mode.
    Disconnect the USB cable from the iPhone.
    Power off the device (Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the the iPhone or iPod touch to turn off.
    Press and hold the Home button while reconnecting USB cable. When you reconnect USB, the device should then power on.
    Continue holding the Home button while iPhone starts up. While starting up, you will see the Apple logo.
    When you see "Connect to iTunes" on the screen, you can release the Home button and iTunes will display the recovery mode message.
    This will require an iPhone Restore.

  • Bought a new macbook pro, synced phone with the new computer and now cant get transferred music onto my phone

    I recently bought a new macbook pro to replace my 2007 macbook.  I transferred my music from the old macbook to the new macbook pro.  Today i updated my iphone4 to ios5 (on the new macbook pro), and in doing so, deleted my library off of my phone.  The problem is, when I try to put the music i previously transferred onto the new computer, to my iphone, it wont let me transfer anything.  Any ideas why this might be happening?

    The standard policy is 14 days return no questions asked.
    The Original Poster got someone on the phone who knew how to "play" the system to get around that and squirt out a gift card "for customer satisfaction". The person you talked to was less familiar with how to play the system, so simply restated the standard company policy.
    If you really did buy it 14 days ago today, take it all back to the store and politely insist that you get the gift card you feel are entitled to. Exactly how they process that transaction, and whether you leave with the same computer you brought in, is their problem.

  • Older iPod not showing up for syncing in iMac iTunes

    I've an older iPod, model MA497LL, i.e. an 8 GB, software version 1.1.3.
    When I try to synch it, it does not appear on iTunes 11.3 on my 10.9.4 desktop.
    Any fixes? Or is this guy past synching?

    Hello ThisIssue
    Check out the troubleshooting assistant in the first article below. It will walk you through a few simple steps like restarting your iPod nano and changing ports on your Mac. Another troubleshooting option is to put your iPod nano into disk mode and then plug it in and see if iTunes recognizes it to be restored.
    iPod nano (2nd generation) Troubleshooting Assistant
    https://www.apple.com/support/ipod/five_rs/nano2gen/
    Putting iPod into Disk Mode
    http://support.apple.com/kb/HT1363
    Restoring iPod to factory settings
    http://support.apple.com/kb/ht1339
    Regards,
    -Norm G.

  • I left my ipad in the car and it was 26 degrees out now i get nothing. how do i power  back up?

    i left my ipad in the car and it was 26 degrees out now i get nothing. how do i power  back up?

    Specs for the Retina iPad are below.  You can store at 26, but you may need to allow it to reach room temp slowly (no hair dryers).

  • Can I recover photos on iPhone 4S not backed up on iCloud or computer when connect to iTunes error shows up on screen. Was trying to update now it must go to restore.HELP!

    Can I recover photos on iPhone 4S not backed up on iCloud or computer when connect to iTunes error shows up on screen? My son was trying to update now it must go to restore. HELP!

    If there is no backup of the device to iCloud or iTunes and the device has gone into recovery mode when trying to update, then the data is gone. If the device was connected to iTunes to do the update originally, it is possible the default backup was done, unless your son disabled it. To check to see if there is a backup, go in iTunes, click on Edit, Preferences, Devices and see if there is a backup listed for the date/time before the update was started. If he was doing the update OTA on the phone, then there is no backup. No backup, no photos.

  • My ifone3gs stopped working while updating...its even nt reading sim..it just shows a connection sign toitune.. whats the prb??

    my ifone3gs stopped working while updating...its even nt reading sim..it just shows a connection sign toitune.. whats the prb??

    It means that your phone crashed during the updating process and is now in recovery mode.  See this article:
    iPhone and iPod touch: Unable to restore

  • After doing an OS update, now iTunes stops playing music after playing a few songs.

    After doing an OS update, now iTunes stops playing music after playing a few songs. Any thoughts about how to remedy this?

    Same Problem here. Also, when this happens, it loses whatever album art was playing before. I've tried reinstalling and it doesn't help. Any ideas how to fix this? It's really annoying!

  • Weblogic.utils.NestedError: This address was valid earlier, but now we get:

    I am not sure if it is related. My C++ application encountered intermittent JMS_JVM_ERROR, when it calls JMSC.lib JmsContextCreate.
    In OSB log, I noticed this error (weblogic 10gR3)
    weblogic.utils.NestedError: This address was valid earlier, but now we get:
    at weblogic.rjvm.JVMID.address(JVMID.java:528)
    at weblogic.rjvm.RJVMManager.record(RJVMManager.java:153)
    at weblogic.rjvm.RJVMManager.findOrCreateInternal(RJVMManager.java:289)
    at weblogic.rjvm.RJVMManager.findOrCreateRemote(RJVMManager.java:139)
    at weblogic.rjvm.ConnectionManagerServer.handleIdentifyRequest(ConnectionManagerServer.java:495)
    at weblogic.rjvm.ConnectionManager.dispatch(ConnectionManager.java:863)
    at weblogic.rjvm.MsgAbbrevJVMConnection.dispatch(MsgAbbrevJVMConnection.java:453)
    at weblogic.rjvm.t3.MuxableSocketT3.dispatch(MuxableSocketT3.java:322)
    at weblogic.socket.AbstractMuxableSocket.dispatch(AbstractMuxableSocket.java:394)
    at weblogic.socket.NTSocketMuxer.processSockets(NTSocketMuxer.java:105)
    at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
    at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
    at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
    java.net.UnknownHostException: remoteHostHub
    at java.net.InetAddress.getAllByName0(InetAddress.java:1157)
    at java.net.InetAddress.getAllByName(InetAddress.java:1083)
    at java.net.InetAddress.getAllByName(InetAddress.java:1019)
    at java.net.InetAddress.getByName(InetAddress.java:969)
    at weblogic.rjvm.JVMID.address(JVMID.java:521)
    at weblogic.rjvm.RJVMManager.record(RJVMManager.java:153)
    at weblogic.rjvm.RJVMManager.findOrCreateInternal(RJVMManager.java:289)
    at weblogic.rjvm.RJVMManager.findOrCreateRemote(RJVMManager.java:139)
    at weblogic.rjvm.ConnectionManagerServer.handleIdentifyRequest(ConnectionManagerServer.java:495)
    at weblogic.rjvm.ConnectionManager.dispatch(ConnectionManager.java:863)
    at weblogic.rjvm.MsgAbbrevJVMConnection.dispatch(MsgAbbrevJVMConnection.java:453)
    at weblogic.rjvm.t3.MuxableSocketT3.dispatch(MuxableSocketT3.java:322)
    at weblogic.socket.AbstractMuxableSocket.dispatch(AbstractMuxableSocket.java:394)
    at weblogic.socket.NTSocketMuxer.processSockets(NTSocketMuxer.java:105)
    at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
    at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
    at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)

    I am not sure if it is related. My C++ application encountered intermittent JMS_JVM_ERROR, when it calls JMSC.lib JmsContextCreate.
    In OSB log, I noticed this error (weblogic 10gR3)
    weblogic.utils.NestedError: This address was valid earlier, but now we get:
    at weblogic.rjvm.JVMID.address(JVMID.java:528)
    at weblogic.rjvm.RJVMManager.record(RJVMManager.java:153)
    at weblogic.rjvm.RJVMManager.findOrCreateInternal(RJVMManager.java:289)
    at weblogic.rjvm.RJVMManager.findOrCreateRemote(RJVMManager.java:139)
    at weblogic.rjvm.ConnectionManagerServer.handleIdentifyRequest(ConnectionManagerServer.java:495)
    at weblogic.rjvm.ConnectionManager.dispatch(ConnectionManager.java:863)
    at weblogic.rjvm.MsgAbbrevJVMConnection.dispatch(MsgAbbrevJVMConnection.java:453)
    at weblogic.rjvm.t3.MuxableSocketT3.dispatch(MuxableSocketT3.java:322)
    at weblogic.socket.AbstractMuxableSocket.dispatch(AbstractMuxableSocket.java:394)
    at weblogic.socket.NTSocketMuxer.processSockets(NTSocketMuxer.java:105)
    at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
    at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
    at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
    java.net.UnknownHostException: remoteHostHub
    at java.net.InetAddress.getAllByName0(InetAddress.java:1157)
    at java.net.InetAddress.getAllByName(InetAddress.java:1083)
    at java.net.InetAddress.getAllByName(InetAddress.java:1019)
    at java.net.InetAddress.getByName(InetAddress.java:969)
    at weblogic.rjvm.JVMID.address(JVMID.java:521)
    at weblogic.rjvm.RJVMManager.record(RJVMManager.java:153)
    at weblogic.rjvm.RJVMManager.findOrCreateInternal(RJVMManager.java:289)
    at weblogic.rjvm.RJVMManager.findOrCreateRemote(RJVMManager.java:139)
    at weblogic.rjvm.ConnectionManagerServer.handleIdentifyRequest(ConnectionManagerServer.java:495)
    at weblogic.rjvm.ConnectionManager.dispatch(ConnectionManager.java:863)
    at weblogic.rjvm.MsgAbbrevJVMConnection.dispatch(MsgAbbrevJVMConnection.java:453)
    at weblogic.rjvm.t3.MuxableSocketT3.dispatch(MuxableSocketT3.java:322)
    at weblogic.socket.AbstractMuxableSocket.dispatch(AbstractMuxableSocket.java:394)
    at weblogic.socket.NTSocketMuxer.processSockets(NTSocketMuxer.java:105)
    at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
    at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
    at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)

  • HT5278 When sync ipad2 with itunes, was asked to update ipad IOS to 5.1.1 but unsuccessful to download. same thing for itunes 10.6.3. It works when download externally. wonder what is the solution!?

    Dear friends,
    When sync ipad2 with itunes, was asked to update ipad IOS to 5.1.1 but unsuccessful to download. same thing for itunes 10.6.3. It works when download externally.
    wonder what is the solution!?

    There is no download for iTunes on the iPad.
    iTunes on the iPad is a link for the store only, it is built into ios.

  • I have paid for itunes match and have now lost all my music of my iphone except what I paid for from itunes, 964 songs gone not at all happy.  Can anyone help

    I have paid for itunes match and have now lost all my music off my iphone except what I paid for from itunes, 964 songs gone into the cloud. Can anyone help please?

    Enabling iTunes Match does not delete music from your computer. Why do you think it is now not in the iTunes library if it was before? If all of your music was in the iTunes library then it is also now in the cloud if iTunes has completed it's scan and all the music meets the match requirements. Enable the iCloud Status column in the iTunes browser by switching to Song view and pulling down View > View Options. Select iCloud Status then close the small window. Sort on the new column. Your music should be listed as "purchased," "matched" and "uploaded." Some tracks may be "ineligible." Post back and let us know.

  • My Ipod would not sync to the itunes at all, Help? Itunes shows waiting for sync to start. then get a message saying that it failed to start. I restored the ipod but the problem still occured.

    I have already updated all my itunes software and everything else.
    recently, when I connect my ipod itouch to my itunes, it shows waiting for sync to start.
    Then a message saying that it failed to start.
    I have restored my itouch but it still fails to sync.
    Any suggestions how to resolve it?

    Se if this previous discussion helps:
    Sync Session Failed to Start iTouch iOS5: Apple Support Communities

  • I changed a few settings and now cant get the iPad to shut off with the shut off switch and can't back to the settings icon to change it back. Any ideas?

    I changed a few settings on my iPad and now cant get the iPad to shut off with the shutoff button and the button to get to all the icons won't let me get back to settings to change the settings back.  Can anyone help?

    Have you tried resetting your iPad?
    Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10-15 seconds).
    No data will be lost.

  • Cannot get Membership Provider with name RoleProvider. The membership provider for this process was not properly configured. You must configure the membership provider in the .config file for every SharePoint process.

    I am trying to create a web application that uses AD LDS as its authentication provider. I have followed all the steps and verified all the web.config files, but I receive the error below:
    Cannot get Membership Provider with name CustomRoleProvider. The membership provider for this process was not properly configured. You must configure the membership provider in the .config file for every SharePoint process.
    Has anyone come across this error before?

    There seems to be some issues in your web.config files. Please make sure your Web application entries for membership and role provider(at central admin site) are matching with Web.config entries. your error
    "Cannot get Membership Provider with name CustomRoleProvider.
    ", indicating that you may have used role provider name in Membership provider text box or in web.config.
    Also please make sure that you have correct entries in all 3 web.config files - Central Administration , Security Token Service (STS), Web application .
    Please refer  -
    Forms Based Authentication (FBA) in SharePoint 2013
    Thanks
    Ganesh Jat [My Blog |
    LinkedIn | Twitter ]
    Please click 'Mark As Answer' if a post solves your problem or 'Vote As Helpful' if it was useful.

  • Can anyone help with problem updating iphone5s cant get anything only apple on screen sometimes screen flashes blue

    can anyone help with problem updating iphone5s cant get anything only apple on screen sometimes screen flashes blue

    Hey damien555,
    Thanks for the question, I understand how frustrating this may be. It sounds like the update process may have been interrupted, and to resolve the issue, we’ll need to restore your device in recovery mode with iTunes:
    If you can't update or restore your iOS device
    http://support.apple.com/kb/HT1808
    Thanks,
    Matt M.

Maybe you are looking for

  • How to transfer Data of One internal table to another

    Dear Guru, I have an internal table DATA: BEGIN OF t_cust OCCURS 0,             kschl  LIKE rv13a-kschl,             werks LIKE komg-werks,             matnr LIKE komg-matnr,             kbetr  LIKE konp-kbetr,             datab LIKE rv13a-datab,    

  • How can I read a document created under "pages" on a Mac book air on an other computer

    How can I read a document created under "pages" on a Mac book air on an other computer or even send this document in a mail to anyone ?

  • Oracle WorkFlow Server (Middle Tier Components)

    To OWB Gurus, I'm trying to install Oracle WorkFlow Server to create Process Flows and Schedule for the ETL mappings that I have. When tryin to install WorkFlow Server, it specifies to install Middle-Tier Components. My question is for creating the W

  • Colour Management problems - media AE to Encoder

    I have noticed that Adobe Media Encoder Doesn't seem to cater for colour management. Or make mention of how applies gamma adjustments to the content it encodes. Flash in particular. 1. I'm working in colour managed environment in AE (eg. Adobe 1998),

  • Problem with faux column and min 100% height

    hello i',m trying to create a faux column on this page: http://www.malcmabe.co.uk/listtest.html. the column i'm trying to do is the left hand side menu column. i just can't get this to work, so i'm obviousley missing something. also, i've set the wra