TS4510 I just updated to IOS 6.1 and the Do Not Disturb stays on all the time, now what? It had been fixed a while ago.

Mid January, I noticed my Do NOt Disturb was working again, turning off during the day. Now, I just updated to IOS 6.1 and it's on all the time, is this going to get fixed?
thanks, Susan

Have you deleted the account and re-added it?

Similar Messages

  • HT4623 I have just updated to IOS 7.04 and my mail, calendar and notes are now blank. How do I get it back?

    I have just updated to IOS 7.04 and my mail, calendar and notes are now blank. How do I get it back?

    it sounds like you were using iCloud. Go under Settings > iCloud and make sure the switch for Notes is ON (green side showing). If it's already on, turn it off, wait 30 seconds, then turn it back on. Your notes should sync up.

  • I just updated to ios 6.1 and now my cellular data is not working

    I just updated to ios 6.1 and now my cellular data is not working

    UPDATE: Ok, I just got back from the Apple store and I've performed a full restore. The good news is that the restore did allow cellular data to work again, restoring as new and restoring an iCloud backup both worked fine. I also tried everything Apple suggests on the http://support.apple.com/kb/TS3780 an only restoring had any effect. Even though that worked for me, I went Ahead and went to the Apple store because this problem had already occurred with me, but only intermittently (requiring frequent resets); the 6.1 update seemed to just make it more 'permanent' so to speak. after the tech tested it with a known-good SIM compared to a new iphone 5, he observed the same stalled cellular data, so my iPhone was swapped out. Hope this helps.
    Cheers

  • Just updated my Ipad operating system and one of my apps starts but then the screen turns white, with only the advertisment at the top showing

    Just updated my Ipad operating system and one of my apps starts but then the screen turns white, with only the advertisment at the top showing

    The normal suggestions.
    Close the app,off fully.  Double tap the home screen then touch and hold any of the icons on the task bar until they jiggle, then close them all off by touching the - sign.
    Then reboot the pad and try the spp again.  If same issue, delete the app, then reload it.  ( no charge). You may just have a bad copy.  If continues, write to the developer, they may need to do an update.  I have an older version of the same app and it works fine.
    Since yours is the ad supported version, they are maing real sure you see the ad.  Is it as simple as you need to click thru the ad to get to the game?

  • Just updated to ios 7.1 and wanted to go back to ios 7.0.6

    for some reason I didn't like the way ios 7.1 works specially to the battery life BUT when I try to restore am getting 3194 error and when I try the hosts fix am getting 3004.
    please help

    Many people have discovered that doing a reset of all settings will improve the battery use problem. Use the Settings app.
    Settings > General > Reset > Reset all Settings.
    This will not result in data loss but you will have to enter all passwords again.
    The update to iOS 7.1 seems to have turned on some things that the user may have not had on before. Go through your Settings carefully turning off anything that is not needed or wanted. Also check screen brightness as that may be turned up to the max as well.

  • Just updated to iOS 8, iMessage and FaceTime not activating?

    I own an iPhone 4s and recently updated my phone to iOS 8. Before, I was able to freely iMessage and FaceTime people without any problems. After updating, I am now not able to activate my iMessage or FaceTime at all. When turning on the iMessage, it always returns to the "Unable to Activate, turn on iMessage to try again." I have tried everything I could find to get this to work yet none of them are specifically for iOS 8 and they are not working. I have even restored my phone, reset the network settings, and many other supposed "solutions" due to my desperation. I just logged out of my Apple ID for iMessage and now it is simply stuck on the "Waiting for Activation" Advice?

    go to settings, general, reset, reset all settings. this causes the phone to reset and finishes installing certain iOS 8 features and should fix any glitches you're having. i have not met someone yet where this did not work.

  • ***! Just updated to IOS 7.03 and iphoto looks like crap!

    When will Apple quit worsening their software with bad updates? Photo in IOS 7 looks imbarassingly ridiculous. Not they've even
    chopped down iphote without asking for permission. Apple's going in a bad, bad direction.

    About all you can do here is send Apple your feedback:
    http://www.apple.com/feedback/

  • Since updating to ios 5.1 my iphone asks for my apple id all the time, how can I stop this?

    Since updating to the new ios 5.1 my iphone 4 asks for my apple id all the time, why and how do I stop it happening??

    Already signed in, but tried signing out then back in without any success, still asking for apple I'd password.

  • Just updated to 10.9.4 and mail is not working?

    Just updated to OS X Mavericks 10.9.4 and mail is not working?
    Any advice appreciated.

    Try these in order testing your system after each to see if it's back to normal:
    1. a. Resetting your Mac's PRAM and NVRAM
        b. Intel-based Macs: Resetting the System Management Controller (SMC)
    2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
         Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
         COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the
         computer and after the chime press and hold down the OPTION key until the boot manager
         screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
         Reinstall the 10.9.4 update: OS X Mavericks 10.9.4 Update (Combo).
    4. Reinstall Lion/Mountain Lion, Mavericks: Reboot from the Recovery HD. Select Reinstall Lion/Mountain Lion, Mavericks from the Utilities menu, and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
         Reinstall the 10.9.4 update: OS X Mavericks 10.9.4 Update (Combo).

  • HT201364 I just bought a new Macbook Pro and I'm not sure if I have the new Mavericks as my OS.

    I just bought a new Macbook Pro and under current operating system, it list OS X 10.9.1 as my current system and says I can update to Mavericks. Isn't 10.9.1 the newest OS for Mac? This is my first Mac and I'm not sure about the way it lists the OS systems in the "about this computer tab". I tried to update to Mavericks and it will not allow me to update, despite meeting all of the above requirements. Can anyone help me?

    Mac OS X 10.9 and 10.9.1 are Mavericks.
    (96412)

  • I just updated to iOS 6.1 and my iPad 3 is stuck in recovery mode???

    After receiving the prompt to update my software on my iPad 3 Retina, I plugged the iPad into the charger and began the software update. A few seconds later, everything went black and the plug into iTunes icons appeared. I think this is called the recovery mode screen.
    I tried plugging into iTunes on my iMac, but it wants me to restore the ipad and I will lost all of my apps and content. What the **** is going on here???
    Why cant Apple make a **** software update that JUST WORKS???
    Can anyone please help...

    Its absolutely imperative you make new backups of your data before updating any software for the above reasons, alone.
    You will nomt looseany of your purchased content fomr the itunes/app stores though. You can redownload them directly on the device after restoring: http://support.apple.com/kb/HT2519
    If a recent backup contains the data you want, just restore from said backup.
    Ultimatley, things can go bad, its all human created afterall. Next time, take the time to cover yourself.

  • I just updated to IOS 8.2 and it won't recognize my thumb print and I forgot my passcode. What do I do?

    Great, I knew I shouldn't have updated right away. Now post update my phone is not reading my thumbprint and just wants me to manually enter my passcode, and I don't remember it. What do I do to recover the passcode?

    There is no recovery of passcode, you will need to restore your phone as new to remove the passcode.
    Forgot passcode for your iPhone, iPad, or iPod touch, or your device is disabled - Apple Support

  • I have just updated to iOs 5 software and have lost all my contacts! apps etc have restored but no numbers! please help!

    i updated my phone and have lost all my contacts i have restored and all my apps are back but no contacts! help!

    What application were you syncing your contact to before you updated? Check the settings on the info tab and sync them back.
    If you were NOT syncing them to an application (Outlook or Windows Address Book on a PC, Address Book on a Mac), you can try forcing a restore from your backup again. If they don't come back, they are most likely gone.

  • I just updated to IOS 8.2 and now I can't connect to any WIFI network at home or elsewhere. I get a message that says "can't scan for WIFI" and it just keeps searching. How do I fix this?

    Can someone tell me how to fix this problem before I use up all my data?

    If you can't connect to home wi fi, or any wi fi, go into the RESET area of your SETTINGS and choose RESET NETWORK CONNECTIONS. Turn the phone off and back on and you should be okay. It may take more than one try. Good luck.

  • I just update my iOS to lion. and now my itunes don't work. this is the mistake it shows

    Process:         iTunes [1622]
    Path:            /Applications/iTunes.app/Contents/MacOS/iTunes
    Identifier:      com.apple.iTunes
    Version:         10.6 (10.6)
    Build Info:      iTunes-10604001~1
    Code Type:       X86-64 (Native)
    Parent Process:  launchd [128]
    Date/Time:       2012-03-19 20:06:52.132 -0500
    OS Version:      Mac OS X 10.7 (11A390)
    Report Version:  8
    Interval Since Last Report:          23678 sec
    Crashes Since Last Report:           33
    Per-App Crashes Since Last Report:   2
    Anonymous UUID:                      17697DEB-A56C-46F5-9CA0-6114637DC9E2
    Crashed Thread:  0
    Exception Type:  EXC_BREAKPOINT (SIGTRAP)
    Exception Codes: 0x0000000000000002, 0x0000000000000000
    Application Specific Information:
    dyld: launch, loading dependent libraries
    @executable_path/../Frameworks/iPodUpdater.framework/Versions/A/iPodUpdater
    Dyld Error Message:
      Library not loaded: @executable_path/../Frameworks/iPodUpdater.framework/Versions/A/iPodUpdater
      Referenced from: /Applications/iTunes.app/Contents/MacOS/iTunes
      Reason: unsafe use of @executable_path in /Applications/iTunes.app/Contents/MacOS/iTunes with restricted binary
    Binary Images:
           0x10627b000 -        0x10741afe7  com.apple.iTunes (10.6 - 10.6) <A7AC514C-E3C4-B6E4-522A-D3FE410790C6> /Applications/iTunes.app/Contents/MacOS/iTunes
        0x7fff65e7b000 -     0x7fff65eb01ff  dyld (195 - ???) <71093406-21CF-3DBE-A001-802259ED5300> /usr/lib/dyld
    Model: MacBookPro6,2, BootROM MBP61.0057.B0C, 2 processors, Intel Core i7, 2.66 GHz, 4 GB, SMC 1.58f16
    Graphics: NVIDIA GeForce GT 330M, NVIDIA GeForce GT 330M, PCIe, 512 MB
    Graphics: Intel HD Graphics, Intel HD Graphics, Built-In, 288 MB
    Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1067 MHz, 0x80AD, 0x484D54313235533654465238432D47372020
    Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1067 MHz, 0x80AD, 0x484D54313235533654465238432D47372020
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 5.100.198.11 )
    Bluetooth: Version 2.5.0b13, 2 service, 19 devices, 1 incoming serial ports
    Network Service: AirPort, AirPort, en1
    Serial ATA Device: Hitachi HTS545050B9SA02, 500,11 GB
    Serial ATA Device: MATSHITADVD-R   UJ-898
    USB Device: hub_device, 0x0424  (SMSC), 0x2514, 0xfd100000 / 2
    USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd120000 / 4
    USB Device: Built-in iSight, apple_vendor_id, 0x8507, 0xfd110000 / 3
    USB Device: hub_device, 0x0424  (SMSC), 0x2514, 0xfa100000 / 2
    USB Device: BRCM2070 Hub, 0x0a5c  (Broadcom Corp.), 0x4500, 0xfa110000 / 5
    USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8218, 0xfa113000 / 6
    USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0xfa130000 / 4
    USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0237, 0xfa120000 / 3
    eny ideas???

    De nada amigo.
    Thank You for extending the courtesy of awarding points to comments that are helpful or provide answers in the Apple Support Communities, as this is not mandatory, but it is much appreciated!

Maybe you are looking for