TS4579 since i have installed os X safari is not working properly and thunderbolt firmware update keps reappearing even though i have done the update .....
Can anybody Help me ,
my Mac was working great til i decided to update to OS X Mavericks and i ran the update and since then my Safari is crashing all the time and freezing too, i had to download opera which is working fine , and the update thunderbolt firmware keeps reappearing although i have done couple of times ...
I wish i didnt
bunjamin wrote:
There is now a new line in BBM that wasn't there before which covers the message that I am typing, so I can't actually see what I am typing.
Hi bunjamin,
just go to BlackBerry World, and update all your apps including BBM.
bunjamin wrote:
Every time I unlock my phone, my screen enlarges so I can't really see much on the hub/notification screen and it defaults to the hub which it didn't do before).
you can turn off the magnifying glass :
device settings >> accessibility >> magnify mode >> OFF
you can deactivate the "reset to Hub view" :
hub >> overflow (bottom right button) >> Settings >> Display and actions >> Return to Default View When Idle >> OFF
bunjamin wrote:
my ringtone is much softer than it was previously
yes, BlackBerry has acknowledged this bug in this article from the public knowledge base:
KB36755 After upgrading BlackBerry 10 OS to version 10.3.1 the volume for notifications is noticed to be significantly lower than in the previous version
The search box on top-right of this page is your true friend, and the public Knowledge Base too:
Similar Messages
-
Safari is not working properly
Safari is not working properly......it stop responding without any reason and after a few seconds begins to work again......
Before it was very rare....but now it has become regular ....what should I do to fix this issue...?Have you tried restarting or resetting your iPad?
Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after the iPad shuts down, then press the On/Off button until the Apple logo appears.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds). Ignore the "Slide to power off" -
After installing Lion all Adobe products not working will and to slow
After installing Lion all Adobe products not working will and to slow
Like the photoshop is to slow to work on it
Please I need to now what's the problem and how can I solve it
Best regardsYeah Im at a loss too for what is going On here I Do Audio video Editing On the PC side till Now Just got a Not even 6 mo old Mac book pro Dual core 2.5 Ghz 17 in 160 Gb HD 2 GB Ramm did fresh reinstalled of tiger Patched to 10.4.11 then asked the tech at apple store best way to go for Installing my Adobe CS3.3 Master Suite for windows on Here As I said I did not want to go with Lepord as well as I do not use vista yet on PC side with my audio video Apps Abelton live 7.0 Reason 4 Pro tools 7.4 M powered Avid media Composer 3.0 and everything Adobe Makes now he says 2 ways to go VM fusion Or Parallels He likes the Parallels I go that route I install it realize to make Adobe suite work I have too do a custom Virtual machine with 1.5 GB ramm instead of default 512 MB and I create virtual HD at 60 GB instead of default 32 GB which The first time i Installed the master Collection at the 32 GB setting I think it ran out of disk space on the install so i increased the VM to the current settings went to Adobe to Parallels site and Got updates and windows and apple removal tools and ran them here goes reinstall # 3 it takes about 1 1/2 Hrs then at end give ya the error 19-20 errors and when you go look into the folders in Program files adobe there are no Icon launch files and in your programs tab under adobe suite all you see is 2 icons that do not launch anything ? any help is greatly appreciated new to Macs Like them but a lil discouraged !!!!
-
after update to IOS 4.3.5 my Iphone incoming and out going calls is not working properly and I have to remove the SIM regulerly to conduct or receive a call
It is not practicale to do this always any one faces the same problemThere may be a problem with the SIM card. Get a new SIM card from your carrier - there should be no charge for a replacement.
If no change with a new SIM card, the standard troubleshooting steps in order are:
Power your iPhone off and on.
An iPhone reset, which is done by pressing and holding the home button and the sleep/wake or on/off button simultaneously until you see the Apple logo and then release.
Restore your iPhone with iTunes from your iPhone's backup.
Restore your iPhone with iTunes as a new iPhone or not from your iPhone's backup.
If no change after any of these steps in order, your iPhone has a hardware problem. -
Does anyone else have a problem in iTunes where they download a movie trailer and then they get a message saying iTunes is not working properly and it shuts off iTunes?
Hello Suzanne,
Thank you for providing the details of iTunes unexpectedly quitting. You have taken some really good troubleshooting steps already. I found an article with additional steps you can take to further isolate and troubleshoot an issue like the one you described:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717
Thank you for using Apple Support Communities.
Best,
Sheila M. -
Ipad2, safari does not work properly after ios6 update. How do I fix it?
I need help in fixing safari problems after ios6
With the amount of information you've provided it's impossible to offer a potential solution. We can't see your computer so we need to know the details of your problem and setup, i.e.:
what version of iPhoto are you using?
what system version are you running?
what do you mean by not working properly? Explain in detail.
what fixes have you tried?
where is your library located?
did you apply any updates or upgrades just prior to the problem occurring?
are you running a "managed" or "referenced" library?
what type of Mac?
how much free space on your boot drive?
OT -
Hi ALL i have a BDC code it is not working properly
this BDC code is not working properly , when ever the file is transfering BDC is aborting in the case of invalid material/batch comes into teh picture... so please could you ''Check for invalid material/batch combinations so they are not processed by the BDC in the program and correctly output in an exception report''
*****************************CODE HERE*****************************
S E L E C T I O N S C R E E N
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME.
PARAMETERS: p_file LIKE rlgrap-filename,
p_arch LIKE rlgrap-filename. "RM080107
SELECTION-SCREEN SKIP.
PARAMETERS: p_mode LIKE ctu_params-dismode DEFAULT 'N'.
SELECTION-SCREEN END OF BLOCK b1.
I N C L U D E S
INCLUDE zwm_np_stock_recon_top.
INCLUDE zwm_np_stock_recon_f01.
I N I T I A L I Z A T I O N
INITIALIZATION.
PERFORM get_interface_filename USING c_interface_file p_file.
PERFORM get_interface_filename USING c_archive_file p_arch."RM080107
S T A R T O F S E L E C T I O N
START-OF-SELECTION.
PERFORM read_file USING p_file.
PERFORM pre_processing.
E N D O F S E L E C T I O N
END-OF-SELECTION.
PERFORM process_checks.
IF w_no_change = 'X'.
WRITE: / text-b03.
WRITE: / sy-uline(34).
ELSE.
PERFORM bdc_mi09.
PERFORM file_check_report.
PERFORM bdc_report.
ENDIF.
PERFORM post_process_checks.
*-- Move the processed file to archive directory
PERFORM move_file.
...*************.........first include...................************
INCLUDE ZWM_NP_STOCK_RECON_TOP *
Data declaration ----------------------------------------------
TYPES: st_rawdata(2000) TYPE c.
TYPES: BEGIN OF st_stck_cnt,
werks TYPE iseg-werks, "plant
lgort TYPE iseg-lgort, "storage location
matnr TYPE iseg-matnr, "material number
charg TYPE iseg-charg, "batch
vfdat TYPE mch1-vfdat, "Sell by date
lwedt TYPE mch1-lwedt, "Manufacture date
quarn(8) TYPE n, "qaunrantine quantity
menge(8) TYPE n, "quantity on hand
message(1), "Message Type (E/W/I)
msg_txt TYPE t100-text, "Message Text
zerostck(1), "Zero stock identifier "RM220307
END OF st_stck_cnt.
TYPES: BEGIN OF st_batch_errors,
matnr TYPE iseg-matnr, "material number
charg TYPE iseg-charg, "batch
clabs TYPE mchb-clabs, "Stock Balance
END OF st_batch_errors.
DATA:
t_rawdata TYPE TABLE OF st_rawdata,
w_rawdata TYPE st_rawdata,
t_stck_cnt TYPE TABLE OF st_stck_cnt,
d_stck_cnt TYPE TABLE OF st_stck_cnt, "RM191006
w_stck_cnt TYPE st_stck_cnt,
t_batch_errors TYPE TABLE OF st_batch_errors,
w_batch_errors TYPE st_batch_errors,
t_messtab LIKE bdcmsgcoll OCCURS 0,
w_messtab LIKE LINE OF t_messtab,
w_no_change.
CONSTANTS: c_interface_file(26) TYPE c VALUE 'ZNP_STOCK_RECON',
c_archive_file(26) TYPE c
VALUE 'ZNP_STOCK_RECON_ARCHIVE'. "RM080107
.*************................second include..........************
***INCLUDE ZWM_NEXTPHARMA_STOKRECON_F01 .
*& Form read_file
reads NextPharma file sent through via webmethods
-->P_FILENAME
FORM read_file USING p_filename.
CLEAR: t_rawdata,
w_rawdata.
REFRESH: t_rawdata.
OPEN DATASET p_filename FOR INPUT IN TEXT MODE.
IF sy-subrc <> 0.
MESSAGE e720(01).
ENDIF.
DO.
READ DATASET p_filename INTO w_rawdata.
IF sy-subrc <> 0.
EXIT.
ELSE.
APPEND w_rawdata TO t_rawdata.
ENDIF.
ENDDO.
CLOSE DATASET p_filename.
ENDFORM. " read_file
*& Form pre_processing
Read file values into internal table
FORM pre_processing.
DATA: lw_matnr TYPE iseg-matnr.
LOOP AT t_rawdata INTO w_rawdata.
lw_matnr = w_rawdata+21(20). "RM031006
lw_matnr = w_rawdata+22(18). "RM031006
CALL FUNCTION 'CONVERSION_EXIT_MATN1_INPUT'
EXPORTING
input = lw_matnr
IMPORTING
output = lw_matnr
EXCEPTIONS
length_error = 1
OTHERS = 2.
MOVE: lw_matnr TO w_stck_cnt-matnr.
w_stck_cnt-werks = w_rawdata+14(4).
w_stck_cnt-lgort = w_rawdata+18(4).
w_stck_cnt-charg = w_rawdata+84(25).
w_stck_cnt-vfdat = w_rawdata+109(8).
w_stck_cnt-lwedt = w_rawdata+117(8).
w_stck_cnt-quarn = w_rawdata+141(8).
w_stck_cnt-menge = w_rawdata+125(8).
APPEND w_stck_cnt TO t_stck_cnt.
CLEAR w_stck_cnt.
ENDLOOP.
SORT t_stck_cnt BY werks
lgort
matnr
charg.
DELETE ADJACENT DUPLICATES FROM t_stck_cnt.
ENDFORM. " pre_processing
*& Form bdc_mi09
Run file data via BDC TCODE: MI09
FORM bdc_mi09.
DATA: t_bdcdata TYPE TABLE OF bdcdata,
w_bdcdata TYPE bdcdata,
lw_datum(10) TYPE c,
lw_count(2) TYPE n.
WRITE sy-datum TO lw_datum DD/MM/YYYY.
Front Screen
CLEAR w_bdcdata.
w_bdcdata-program = 'SAPMM07I'.
w_bdcdata-dynpro = '0700'.
w_bdcdata-dynbegin = 'X'.
APPEND w_bdcdata TO t_bdcdata.
Enter
CLEAR w_bdcdata.
w_bdcdata-fnam = 'BDC_OKCODE'.
w_bdcdata-fval = '/00'.
APPEND w_bdcdata TO t_bdcdata.
Count Date
CLEAR w_bdcdata.
w_bdcdata-fnam = 'RM07I-ZLDAT'.
w_bdcdata-fval = lw_datum.
APPEND w_bdcdata TO t_bdcdata.
Document Date
CLEAR w_bdcdata.
w_bdcdata-fnam = 'RM07I-BLDAT'.
w_bdcdata-fval = lw_datum.
APPEND w_bdcdata TO t_bdcdata.
Plant
CLEAR w_bdcdata.
w_bdcdata-fnam = 'IKPF-WERKS'.
w_bdcdata-fval = w_stck_cnt-werks.
APPEND w_bdcdata TO t_bdcdata.
Storage Location
CLEAR w_bdcdata.
w_bdcdata-fnam = 'IKPF-LGORT'.
w_bdcdata-fval = w_stck_cnt-lgort.
APPEND w_bdcdata TO t_bdcdata.
LOOP AT t_stck_cnt INTO w_stck_cnt.
Do not submit items with Errors against them
CHECK w_stck_cnt-message NE 'E' AND
w_stck_cnt-zerostck NE 'X'.
"RM220307
lw_count = lw_count + 1.
Input Screen
CLEAR w_bdcdata.
w_bdcdata-program = 'SAPMM07I'.
w_bdcdata-dynpro = '0731'.
w_bdcdata-dynbegin = 'X'.
APPEND w_bdcdata TO t_bdcdata.
Page Down
CLEAR w_bdcdata.
w_bdcdata-fnam = 'BDC_OKCODE'.
w_bdcdata-fval = '=P+'.
APPEND w_bdcdata TO t_bdcdata.
Material
CLEAR w_bdcdata.
w_bdcdata-fnam = 'ISEG-MATNR(01)'.
w_bdcdata-fval = w_stck_cnt-matnr.
APPEND w_bdcdata TO t_bdcdata.
Batch
CLEAR w_bdcdata.
w_bdcdata-fnam = 'ISEG-CHARG(01)'.
w_bdcdata-fval = w_stck_cnt-charg.
APPEND w_bdcdata TO t_bdcdata.
IF w_stck_cnt-menge NE 0.
Quantity
CLEAR w_bdcdata.
w_bdcdata-fnam = 'ISEG-ERFMG(01)'.
w_bdcdata-fval = w_stck_cnt-menge.
APPEND w_bdcdata TO t_bdcdata.
*-- Begin RM220307 - We need to create an item when the quantity is zero
*-- in file and is non-zero in SAP
ELSE.
Zero Stock indicator
CLEAR w_bdcdata.
w_bdcdata-fnam = 'ISEG-XNULL(01)'.
w_bdcdata-fval = 'X'.
APPEND w_bdcdata TO t_bdcdata.
*-- End RM220307
ENDIF.
ENDLOOP.
CHECK lw_count NE 0.
After all line items have been input
Final Screen
CLEAR w_bdcdata.
w_bdcdata-program = 'SAPMM07I'.
w_bdcdata-dynpro = '0731'.
w_bdcdata-dynbegin = 'X'.
APPEND w_bdcdata TO t_bdcdata.
Save Document
CLEAR w_bdcdata.
w_bdcdata-fnam = 'BDC_OKCODE'.
w_bdcdata-fval = '=BU'.
APPEND w_bdcdata TO t_bdcdata.
CALL TRANSACTION 'MI09' USING t_bdcdata
MODE p_mode
MESSAGES INTO t_messtab.
ENDFORM. " bdc_mi09
*& Form bdc_report
Write BDC Messages.
FORM bdc_report.
DATA: lw_text TYPE t100-text.
SKIP.
WRITE: / text-b01.
WRITE: / sy-uline(21).
SKIP.
Write BDC Messages
LOOP AT t_messtab INTO w_messtab WHERE msgspra = sy-langu.
MESSAGE ID w_messtab-msgid TYPE w_messtab-msgtyp
NUMBER w_messtab-msgnr
WITH w_messtab-msgv1
w_messtab-msgv2
w_messtab-msgv3
w_messtab-msgv4
INTO lw_text.
WRITE: / lw_text.
ENDLOOP.
ENDFORM. " bdc_report
*& Form process_checks
Perform process check before creating BDC Session
FORM process_checks.
DATA: lw_clabs LIKE mchb-clabs,
lw_menge LIKE mchb-clabs,
lw_matnr LIKE mara-matnr,
lw_charg LIKE mch1-charg,
lw_fail,
lw_vfdat TYPE mch1-vfdat,
lv_sell TYPE c, "RM191006
lv_qty(8) TYPE c. "RM191006
CLEAR: d_stck_cnt[], d_stck_cnt. "RM191006
Check if any of the stock figures differ from current stock figures
LOOP AT t_stck_cnt INTO w_stck_cnt.
lw_menge = w_stck_cnt-menge.
SELECT SINGLE clabs INTO lw_clabs
FROM mchb
WHERE matnr = w_stck_cnt-matnr
AND werks = w_stck_cnt-werks
AND lgort = w_stck_cnt-lgort
AND charg = w_stck_cnt-charg.
IF sy-subrc = 0.
IF lw_clabs NE lw_menge.
lw_fail = 'X'.
*-- Begin RM220307 - Do not create PI item if the stock is zero in the
*-- file and is zero in SAP
EXIT.
ELSEIF lw_clabs = 0 AND lw_menge = 0.
w_stck_cnt-zerostck = 'X'.
MODIFY t_stck_cnt FROM w_stck_cnt.
ENDIF.
*-- End RM220307
ELSE.
lw_fail = 'X'.
ERROR
ENDIF.
ENDLOOP.
If no differences are found set NO CHANGE Flag
IF lw_fail NE 'X'.
w_no_change = 'X'.
EXIT.
ENDIF.
Check for Errors in file data
LOOP AT t_stck_cnt INTO w_stck_cnt.
CLEAR lv_sell. "RM191006
SELECT SINGLE matnr INTO lw_matnr
FROM mara
WHERE matnr = w_stck_cnt-matnr.
IF sy-subrc NE 0.
Invalid Material (E)
w_stck_cnt-message = 'E'.
w_stck_cnt-msg_txt = 'Invalid Material'.
MODIFY t_stck_cnt FROM w_stck_cnt.
CONTINUE.
ENDIF.
SELECT SINGLE charg vfdat
INTO (lw_charg, lw_vfdat)
FROM mch1 "KOB01 - changed from MCHA
WHERE matnr = w_stck_cnt-matnr
AND charg = w_stck_cnt-charg.
AND werks = w_stck_cnt-werks.
IF sy-subrc NE 0.
Invalid Material Batch (E)
w_stck_cnt-message = 'E'.
CONCATENATE 'Invalid Material Batch for plant' w_stck_cnt-werks
INTO w_stck_cnt-msg_txt SEPARATED BY space.
MODIFY t_stck_cnt FROM w_stck_cnt.
CONTINUE.
ELSE.
IF w_stck_cnt-vfdat <> lw_vfdat.
Sell by dates do not match (W)
w_stck_cnt-message = 'W'.
w_stck_cnt-msg_txt =
'Sell by Date does not match Shelf life Expiry Date'.
MODIFY t_stck_cnt FROM w_stck_cnt.
lv_sell = 'X'. "RM191006
CONTINUE. "RM191006
ENDIF.
ENDIF.
IF w_stck_cnt-quarn > 0.
Quarantine balance not Zero (W)
w_stck_cnt-message = 'W'.
*-- Begin RM191006
*-- We do want all warning messages on the report
lv_qty = w_stck_cnt-quarn.
CONDENSE lv_qty NO-GAPS.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_OUTPUT'
EXPORTING
input = lv_qty
IMPORTING
output = lv_qty.
w_stck_cnt-msg_txt = 'Quarantine balance is not zero'.
CONCATENATE 'Quarantine balance is ' lv_qty '- not zero'
INTO w_stck_cnt-msg_txt SEPARATED BY space.
MODIFY t_stck_cnt FROM w_stck_cnt.
CONTINUE.
IF lv_sell = 'X'.
APPEND w_stck_cnt TO d_stck_cnt.
CLEAR lv_sell.
ELSE.
MODIFY t_stck_cnt FROM w_stck_cnt.
ENDIF.
*-- End RM191006
ENDIF.
ENDLOOP.
*-- Begin RM191006
*-- Finally get all the records into dummy table to report
APPEND LINES OF t_stck_cnt TO d_stck_cnt.
SORT d_stck_cnt.
DELETE ADJACENT DUPLICATES FROM d_stck_cnt.
*-- End RM191006
ENDFORM. " process_checks
*& Form file_check_report
Write warning and Error messages from File checks
FORM file_check_report.
WRITE: /2 'Material',
22 'Batch',
32 'Sell By',
45 'Message Text'.
WRITE: /2 sy-uline(115).
SKIP.
LOOP AT t_stck_cnt INTO w_stck_cnt. "RM191006
LOOP AT d_stck_cnt INTO w_stck_cnt. "RM191006
CHECK w_stck_cnt-message NE ' '.
WRITE: /2 w_stck_cnt-matnr,
22 w_stck_cnt-charg,
32 w_stck_cnt-vfdat,
43 w_stck_cnt-message,
45 w_stck_cnt-msg_txt.
ENDLOOP.
ENDFORM. " file_check_report
*& Form post_process_checks
Check Material Batches in SAP against NP File
FORM post_process_checks.
RANGES: r_matnr FOR mchb-matnr,
r_lgort FOR mchb-lgort,
r_werks FOR mchb-werks.
SORT t_stck_cnt.
LOOP AT t_stck_cnt INTO w_stck_cnt.
AT END OF matnr.
r_lgort-sign = 'I'.
r_lgort-option = 'EQ'.
r_lgort-low = w_stck_cnt-lgort.
APPEND r_lgort.
r_werks-sign = 'I'.
r_werks-option = 'EQ'.
r_werks-low = w_stck_cnt-werks.
APPEND r_werks.
r_matnr-sign = 'I'.
r_matnr-option = 'EQ'.
r_matnr-low = w_stck_cnt-matnr.
APPEND r_matnr.
ENDAT.
ENDLOOP.
Select all material batches for NP Materials
SELECT matnr charg clabs
INTO TABLE t_batch_errors
FROM mchb
WHERE werks IN r_werks
AND lgort IN r_lgort.
IF sy-subrc EQ 0.
Check if the Material Batches are in the NP file
LOOP AT t_batch_errors INTO w_batch_errors.
Disregard Batches without positive unrestricted stock
IF w_batch_errors-clabs LE 0.
DELETE t_batch_errors.
CONTINUE.
ENDIF.
READ TABLE t_stck_cnt INTO w_stck_cnt
WITH KEY matnr = w_batch_errors-matnr
charg = w_batch_errors-charg.
IF sy-subrc = 0.
DELETE t_batch_errors.
ENDIF.
ENDLOOP.
ENDIF.
CHECK NOT t_batch_errors[] IS INITIAL.
Write Batch chak results to report
SKIP.
WRITE: / text-b02.
WRITE: / sy-uline(74).
WRITE: /2 'Material',
22 'Batch'.
WRITE: /2 sy-uline(32).
SKIP.
LOOP AT t_batch_errors INTO w_batch_errors.
WRITE: /2 w_batch_errors-matnr,
22 w_batch_errors-charg.
ENDLOOP.
ENDFORM. " post_process_checks
G E T _ I N T E R F A C E _ F I L E N A M E
FORM get_interface_filename USING filename lw_path.
DATA: i_file TYPE filename-fileintern,
out_filename LIKE v_path-pathextern.
CLEAR: out_filename.
i_file = filename.
get the interface filename to be used when creating file
CALL FUNCTION 'FILE_GET_NAME'
EXPORTING
logical_filename = i_file
IMPORTING
file_name = out_filename
EXCEPTIONS
file_not_found = 1
OTHERS = 2.
IF sy-subrc = 0.
MOVE out_filename TO lw_path.
IF filename NE c_archive_file. "RM080107
CONCATENATE lw_path 'NP_StockBalance.dat'
INTO lw_path.
*-- Begin RM080107 - Add timestamp to the archived file
ELSE.
CONCATENATE lw_path 'NP_StockBalance' sy-datum sy-uzeit '.dat'
INTO lw_path.
ENDIF.
*-- End RM080107
ELSE.
ENDIF.
ENDFORM. "get_interface_filename
*& Form move_file RM080107
Move the processed file to archive directory
FORM move_file.
*-- At last move the file to archive directory
OPEN DATASET p_arch FOR OUTPUT IN TEXT MODE.
IF sy-subrc = 0.
LOOP AT t_rawdata INTO w_rawdata.
TRANSFER w_rawdata TO p_arch.
ENDLOOP.
ENDIF.
CLOSE DATASET p_arch.
DELETE DATASET p_file.
ENDFORM. " move_fileHi,
S E L E C T I O N S C R E E N
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME.
PARAMETERS: p_file LIKE rlgrap-filename,
p_arch LIKE rlgrap-filename. "RM080107
SELECTION-SCREEN SKIP.
PARAMETERS: p_mode LIKE ctu_params-dismode DEFAULT 'N'.
SELECTION-SCREEN END OF BLOCK b1.
I N C L U D E S
INCLUDE zwm_np_stock_recon_top.
INCLUDE zwm_np_stock_recon_f01.
I N I T I A L I Z A T I O N
INITIALIZATION.
PERFORM get_interface_filename USING c_interface_file p_file.
PERFORM get_interface_filename USING c_archive_file p_arch."RM080107
S T A R T O F S E L E C T I O N
START-OF-SELECTION.
PERFORM read_file USING p_file.
PERFORM pre_processing.
E N D O F S E L E C T I O N
END-OF-SELECTION.
PERFORM process_checks.
IF w_no_change = 'X'.
WRITE: / text-b03.
WRITE: / sy-uline(34).
ELSE.
PERFORM bdc_mi09.
PERFORM file_check_report.
PERFORM bdc_report.
ENDIF.
PERFORM post_process_checks.
*-- Move the processed file to archive directory
PERFORM move_file.
...*************.........first include...................************
INCLUDE ZWM_NP_STOCK_RECON_TOP *
Data declaration ----------------------------------------------
TYPES: st_rawdata(2000) TYPE c.
TYPES: BEGIN OF st_stck_cnt,
werks TYPE iseg-werks, "plant
lgort TYPE iseg-lgort, "storage location
matnr TYPE iseg-matnr, "material number
charg TYPE iseg-charg, "batch
vfdat TYPE mch1-vfdat, "Sell by date
lwedt TYPE mch1-lwedt, "Manufacture date
quarn(8) TYPE n, "qaunrantine quantity
menge(8) TYPE n, "quantity on hand
message(1), "Message Type (E/W/I)
msg_txt TYPE t100-text, "Message Text
zerostck(1), "Zero stock identifier "RM220307
END OF st_stck_cnt.
TYPES: BEGIN OF st_batch_errors,
matnr TYPE iseg-matnr, "material number
charg TYPE iseg-charg, "batch
clabs TYPE mchb-clabs, "Stock Balance
END OF st_batch_errors.
DATA:
t_rawdata TYPE TABLE OF st_rawdata,
w_rawdata TYPE st_rawdata,
t_stck_cnt TYPE TABLE OF st_stck_cnt,
d_stck_cnt TYPE TABLE OF st_stck_cnt, "RM191006
w_stck_cnt TYPE st_stck_cnt,
t_batch_errors TYPE TABLE OF st_batch_errors,
w_batch_errors TYPE st_batch_errors,
t_messtab LIKE bdcmsgcoll OCCURS 0,
w_messtab LIKE LINE OF t_messtab,
w_no_change.
CONSTANTS: c_interface_file(26) TYPE c VALUE 'ZNP_STOCK_RECON',
c_archive_file(26) TYPE c
VALUE 'ZNP_STOCK_RECON_ARCHIVE'. "RM080107
.*************................second include..........************
***INCLUDE ZWM_NEXTPHARMA_STOKRECON_F01 .
*& Form read_file
reads NextPharma file sent through via webmethods
-->P_FILENAME
FORM read_file USING p_filename.
CLEAR: t_rawdata,
w_rawdata.
REFRESH: t_rawdata.
OPEN DATASET p_filename FOR INPUT IN TEXT MODE.
IF sy-subrc <> 0.
MESSAGE e720(01).
ENDIF.
DO.
READ DATASET p_filename INTO w_rawdata.
IF sy-subrc <> 0.
EXIT.
ELSE.
APPEND w_rawdata TO t_rawdata.
ENDIF.
ENDDO.
CLOSE DATASET p_filename.
ENDFORM. " read_file
*& Form pre_processing
Read file values into internal table
FORM pre_processing.
DATA: lw_matnr TYPE iseg-matnr.
LOOP AT t_rawdata INTO w_rawdata.
lw_matnr = w_rawdata+21(20). "RM031006
lw_matnr = w_rawdata+22(18). "RM031006
CALL FUNCTION 'CONVERSION_EXIT_MATN1_INPUT'
EXPORTING
input = lw_matnr
IMPORTING
output = lw_matnr
EXCEPTIONS
length_error = 1
OTHERS = 2.
MOVE: lw_matnr TO w_stck_cnt-matnr.
w_stck_cnt-werks = w_rawdata+14(4).
w_stck_cnt-lgort = w_rawdata+18(4).
w_stck_cnt-charg = w_rawdata+84(25).
w_stck_cnt-vfdat = w_rawdata+109(8).
w_stck_cnt-lwedt = w_rawdata+117(8).
w_stck_cnt-quarn = w_rawdata+141(8).
w_stck_cnt-menge = w_rawdata+125(8).
APPEND w_stck_cnt TO t_stck_cnt.
CLEAR w_stck_cnt.
ENDLOOP.
SORT t_stck_cnt BY werks
lgort
matnr
charg.
DELETE ADJACENT DUPLICATES FROM t_stck_cnt.
ENDFORM. " pre_processing
*& Form bdc_mi09
Run file data via BDC TCODE: MI09
FORM bdc_mi09.
DATA: t_bdcdata TYPE TABLE OF bdcdata,
w_bdcdata TYPE bdcdata,
lw_datum(10) TYPE c,
lw_count(2) TYPE n.
WRITE sy-datum TO lw_datum DD/MM/YYYY.
<b>select single MATNR
WERKS
CHARG
from MCHA
into (l_matnr, l_werks, l_charg)
where matnr = w_stck_cnt-matnr
and werks = w_stck_cnt-werks.
and charg = w_stck_cnt-charg.
if sy-subrc ne 0.
continue.
endif.</b>
Front Screen
CLEAR w_bdcdata.
w_bdcdata-program = 'SAPMM07I'.
w_bdcdata-dynpro = '0700'.
w_bdcdata-dynbegin = 'X'.
APPEND w_bdcdata TO t_bdcdata.
Enter
CLEAR w_bdcdata.
w_bdcdata-fnam = 'BDC_OKCODE'.
w_bdcdata-fval = '/00'.
APPEND w_bdcdata TO t_bdcdata.
Count Date
CLEAR w_bdcdata.
w_bdcdata-fnam = 'RM07I-ZLDAT'.
w_bdcdata-fval = lw_datum.
APPEND w_bdcdata TO t_bdcdata.
Document Date
CLEAR w_bdcdata.
w_bdcdata-fnam = 'RM07I-BLDAT'.
w_bdcdata-fval = lw_datum.
APPEND w_bdcdata TO t_bdcdata.
Plant
CLEAR w_bdcdata.
w_bdcdata-fnam = 'IKPF-WERKS'.
w_bdcdata-fval = w_stck_cnt-werks.
APPEND w_bdcdata TO t_bdcdata.
Storage Location
CLEAR w_bdcdata.
w_bdcdata-fnam = 'IKPF-LGORT'.
w_bdcdata-fval = w_stck_cnt-lgort.
APPEND w_bdcdata TO t_bdcdata.
LOOP AT t_stck_cnt INTO w_stck_cnt.
Do not submit items with Errors against them
CHECK w_stck_cnt-message NE 'E' AND
w_stck_cnt-zerostck NE 'X'.
"RM220307
lw_count = lw_count + 1.
Input Screen
CLEAR w_bdcdata.
w_bdcdata-program = 'SAPMM07I'.
w_bdcdata-dynpro = '0731'.
w_bdcdata-dynbegin = 'X'.
APPEND w_bdcdata TO t_bdcdata.
Page Down
CLEAR w_bdcdata.
w_bdcdata-fnam = 'BDC_OKCODE'.
w_bdcdata-fval = '=P+'.
APPEND w_bdcdata TO t_bdcdata.
Material
CLEAR w_bdcdata.
w_bdcdata-fnam = 'ISEG-MATNR(01)'.
w_bdcdata-fval = w_stck_cnt-matnr.
APPEND w_bdcdata TO t_bdcdata.
Batch
CLEAR w_bdcdata.
w_bdcdata-fnam = 'ISEG-CHARG(01)'.
w_bdcdata-fval = w_stck_cnt-charg.
APPEND w_bdcdata TO t_bdcdata.
IF w_stck_cnt-menge NE 0.
Quantity
CLEAR w_bdcdata.
w_bdcdata-fnam = 'ISEG-ERFMG(01)'.
w_bdcdata-fval = w_stck_cnt-menge.
APPEND w_bdcdata TO t_bdcdata.
*-- Begin RM220307 - We need to create an item when the quantity is zero
*-- in file and is non-zero in SAP
ELSE.
Zero Stock indicator
CLEAR w_bdcdata.
w_bdcdata-fnam = 'ISEG-XNULL(01)'.
w_bdcdata-fval = 'X'.
APPEND w_bdcdata TO t_bdcdata.
*-- End RM220307
ENDIF.
ENDLOOP.
CHECK lw_count NE 0.
After all line items have been input
Final Screen
CLEAR w_bdcdata.
w_bdcdata-program = 'SAPMM07I'.
w_bdcdata-dynpro = '0731'.
w_bdcdata-dynbegin = 'X'.
APPEND w_bdcdata TO t_bdcdata.
Save Document
CLEAR w_bdcdata.
w_bdcdata-fnam = 'BDC_OKCODE'.
w_bdcdata-fval = '=BU'.
APPEND w_bdcdata TO t_bdcdata.
CALL TRANSACTION 'MI09' USING t_bdcdata
MODE p_mode
MESSAGES INTO t_messtab.
ENDFORM. " bdc_mi09
*& Form bdc_report
Write BDC Messages.
FORM bdc_report.
DATA: lw_text TYPE t100-text.
SKIP.
WRITE: / text-b01.
WRITE: / sy-uline(21).
SKIP.
Write BDC Messages
LOOP AT t_messtab INTO w_messtab WHERE msgspra = sy-langu.
MESSAGE ID w_messtab-msgid TYPE w_messtab-msgtyp
NUMBER w_messtab-msgnr
WITH w_messtab-msgv1
w_messtab-msgv2
w_messtab-msgv3
w_messtab-msgv4
INTO lw_text.
WRITE: / lw_text.
ENDLOOP.
ENDFORM. " bdc_report
*& Form process_checks
Perform process check before creating BDC Session
FORM process_checks.
DATA: lw_clabs LIKE mchb-clabs,
lw_menge LIKE mchb-clabs,
lw_matnr LIKE mara-matnr,
lw_charg LIKE mch1-charg,
lw_fail,
lw_vfdat TYPE mch1-vfdat,
lv_sell TYPE c, "RM191006
lv_qty(8) TYPE c. "RM191006
CLEAR: d_stck_cnt[], d_stck_cnt. "RM191006
Check if any of the stock figures differ from current stock figures
LOOP AT t_stck_cnt INTO w_stck_cnt.
lw_menge = w_stck_cnt-menge.
SELECT SINGLE clabs INTO lw_clabs
FROM mchb
WHERE matnr = w_stck_cnt-matnr
AND werks = w_stck_cnt-werks
AND lgort = w_stck_cnt-lgort
AND charg = w_stck_cnt-charg.
IF sy-subrc = 0.
IF lw_clabs NE lw_menge.
lw_fail = 'X'.
*-- Begin RM220307 - Do not create PI item if the stock is zero in the
*-- file and is zero in SAP
EXIT.
ELSEIF lw_clabs = 0 AND lw_menge = 0.
w_stck_cnt-zerostck = 'X'.
MODIFY t_stck_cnt FROM w_stck_cnt.
ENDIF.
*-- End RM220307
ELSE.
lw_fail = 'X'.
ERROR
ENDIF.
ENDLOOP.
If no differences are found set NO CHANGE Flag
IF lw_fail NE 'X'.
w_no_change = 'X'.
EXIT.
ENDIF.
Check for Errors in file data
LOOP AT t_stck_cnt INTO w_stck_cnt.
CLEAR lv_sell. "RM191006
SELECT SINGLE matnr INTO lw_matnr
FROM mara
WHERE matnr = w_stck_cnt-matnr.
IF sy-subrc NE 0.
Invalid Material (E)
w_stck_cnt-message = 'E'.
w_stck_cnt-msg_txt = 'Invalid Material'.
MODIFY t_stck_cnt FROM w_stck_cnt.
CONTINUE.
ENDIF.
SELECT SINGLE charg vfdat
INTO (lw_charg, lw_vfdat)
FROM mch1 "KOB01 - changed from MCHA
WHERE matnr = w_stck_cnt-matnr
AND charg = w_stck_cnt-charg.
AND werks = w_stck_cnt-werks.
IF sy-subrc NE 0.
Invalid Material Batch (E)
w_stck_cnt-message = 'E'.
CONCATENATE 'Invalid Material Batch for plant' w_stck_cnt-werks
INTO w_stck_cnt-msg_txt SEPARATED BY space.
MODIFY t_stck_cnt FROM w_stck_cnt.
CONTINUE.
ELSE.
IF w_stck_cnt-vfdat <> lw_vfdat.
Sell by dates do not match (W)
w_stck_cnt-message = 'W'.
w_stck_cnt-msg_txt =
'Sell by Date does not match Shelf life Expiry Date'.
MODIFY t_stck_cnt FROM w_stck_cnt.
lv_sell = 'X'. "RM191006
CONTINUE. "RM191006
ENDIF.
ENDIF.
IF w_stck_cnt-quarn > 0.
Quarantine balance not Zero (W)
w_stck_cnt-message = 'W'.
*-- Begin RM191006
*-- We do want all warning messages on the report
lv_qty = w_stck_cnt-quarn.
CONDENSE lv_qty NO-GAPS.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_OUTPUT'
EXPORTING
input = lv_qty
IMPORTING
output = lv_qty.
w_stck_cnt-msg_txt = 'Quarantine balance is not zero'.
CONCATENATE 'Quarantine balance is ' lv_qty '- not zero'
INTO w_stck_cnt-msg_txt SEPARATED BY space.
MODIFY t_stck_cnt FROM w_stck_cnt.
CONTINUE.
IF lv_sell = 'X'.
APPEND w_stck_cnt TO d_stck_cnt.
CLEAR lv_sell.
ELSE.
MODIFY t_stck_cnt FROM w_stck_cnt.
ENDIF.
*-- End RM191006
ENDIF.
ENDLOOP.
*-- Begin RM191006
*-- Finally get all the records into dummy table to report
APPEND LINES OF t_stck_cnt TO d_stck_cnt.
SORT d_stck_cnt.
DELETE ADJACENT DUPLICATES FROM d_stck_cnt.
*-- End RM191006
ENDFORM. " process_checks
*& Form file_check_report
Write warning and Error messages from File checks
FORM file_check_report.
WRITE: /2 'Material',
22 'Batch',
32 'Sell By',
45 'Message Text'.
WRITE: /2 sy-uline(115).
SKIP.
LOOP AT t_stck_cnt INTO w_stck_cnt. "RM191006
LOOP AT d_stck_cnt INTO w_stck_cnt. "RM191006
CHECK w_stck_cnt-message NE ' '.
WRITE: /2 w_stck_cnt-matnr,
22 w_stck_cnt-charg,
32 w_stck_cnt-vfdat,
43 w_stck_cnt-message,
45 w_stck_cnt-msg_txt.
ENDLOOP.
ENDFORM. " file_check_report
*& Form post_process_checks
Check Material Batches in SAP against NP File
FORM post_process_checks.
RANGES: r_matnr FOR mchb-matnr,
r_lgort FOR mchb-lgort,
r_werks FOR mchb-werks.
SORT t_stck_cnt.
LOOP AT t_stck_cnt INTO w_stck_cnt.
AT END OF matnr.
r_lgort-sign = 'I'.
r_lgort-option = 'EQ'.
r_lgort-low = w_stck_cnt-lgort.
APPEND r_lgort.
r_werks-sign = 'I'.
r_werks-option = 'EQ'.
r_werks-low = w_stck_cnt-werks.
APPEND r_werks.
r_matnr-sign = 'I'.
r_matnr-option = 'EQ'.
r_matnr-low = w_stck_cnt-matnr.
APPEND r_matnr.
ENDAT.
ENDLOOP.
Select all material batches for NP Materials
SELECT matnr charg clabs
INTO TABLE t_batch_errors
FROM mchb
WHERE werks IN r_werks
AND lgort IN r_lgort.
IF sy-subrc EQ 0.
Check if the Material Batches are in the NP file
LOOP AT t_batch_errors INTO w_batch_errors.
Disregard Batches without positive unrestricted stock
IF w_batch_errors-clabs LE 0.
DELETE t_batch_errors.
CONTINUE.
ENDIF.
READ TABLE t_stck_cnt INTO w_stck_cnt
WITH KEY matnr = w_batch_errors-matnr
charg = w_batch_errors-charg.
IF sy-subrc = 0.
DELETE t_batch_errors.
ENDIF.
ENDLOOP.
ENDIF.
CHECK NOT t_batch_errors[] IS INITIAL.
Write Batch chak results to report
SKIP.
WRITE: / text-b02.
WRITE: / sy-uline(74).
WRITE: /2 'Material',
22 'Batch'.
WRITE: /2 sy-uline(32).
SKIP.
LOOP AT t_batch_errors INTO w_batch_errors.
WRITE: /2 w_batch_errors-matnr,
22 w_batch_errors-charg.
ENDLOOP.
ENDFORM. " post_process_checks
G E T _ I N T E R F A C E _ F I L E N A M E
FORM get_interface_filename USING filename lw_path.
DATA: i_file TYPE filename-fileintern,
out_filename LIKE v_path-pathextern.
CLEAR: out_filename.
i_file = filename.
get the interface filename to be used when creating file
CALL FUNCTION 'FILE_GET_NAME'
EXPORTING
logical_filename = i_file
IMPORTING
file_name = out_filename
EXCEPTIONS
file_not_found = 1
OTHERS = 2.
IF sy-subrc = 0.
MOVE out_filename TO lw_path.
IF filename NE c_archive_file. "RM080107
CONCATENATE lw_path 'NP_StockBalance.dat'
INTO lw_path.
*-- Begin RM080107 - Add timestamp to the archived file
ELSE.
CONCATENATE lw_path 'NP_StockBalance' sy-datum sy-uzeit '.dat'
INTO lw_path.
ENDIF.
*-- End RM080107
ELSE.
ENDIF.
ENDFORM. "get_interface_filename
*& Form move_file RM080107
Move the processed file to archive directory
FORM move_file.
*-- At last move the file to archive directory
OPEN DATASET p_arch FOR OUTPUT IN TEXT MODE.
IF sy-subrc = 0.
LOOP AT t_rawdata INTO w_rawdata.
TRANSFER w_rawdata TO p_arch.
ENDLOOP.
ENDIF.
CLOSE DATASET p_arch.
DELETE DATASET p_file.
ENDFORM. " move_file
Best regards,
Prashant -
I did the latest update to my I pad 2 and lost Safari . I was instructed to switch the Java script on which I did but Safari is still not working properly . how do I get everything back after this software update.
Try a reset: hold down the home button along with the power button until you see the Apple, then let go.
-
Addons are updated without asking even though I have it set to ask me
I have Firefox 5. My addons are automatically updating even though I have selected Ask me what to do.
I have the same problem...Everything was UNchecked and it still checked for updates to add-ons and and started with an updates tab with my start page on a background tab. I went back to v3.6. It no longer checks for addon updates but still starts my my start page on a background tab
-
Have Thundbolt on my mac will not work with my thunderbolt drive
I have a port on my Imac, but it will not work with my ThunderBolt Drive
Agree on cables, you don't want something generic when it comes to thunderbolt in my experience. It's thos accessories that add up and they are profitable for a reason. Cheap isn't always good with accessories.
-
Since upgrading to version 8.02 my iPad2 Safari does not work properly.please help
Since I upgraded to version 8.02 on my iPad2 Safari and Google Chrome do not work beyond displaying a series of websites.
When I want to enter a website they do not respond .
Can anyone tell me what I can do about this?Try some basic troubleshooting:
(A) Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
(B) Try reset all settings
Settings>General>Reset>Reset All Settings
(C) Setup as new (data will be lost)
Settings>General>Reset>Erase all content and settings -
Safari 5 not working properly!
Until earlier today, Safari was working just fine. Then suddenly, when I was changing options on my iPhone to sync with the Safari bookmarks rather than the IE ones, Safari stopped working. After looking at the processes in Task Manager, it is indeed still running, with Safari32*.exe, but it will not appear on the windows to be used.
If I click on it on the taskbar, it will flash and light up, then disappear a second later. I have tried uninstalling and reinstalling, and even going through regedit to ensure all keys with the word safari were gone....And it's still not working!!!
Can someone help?Acck. Okay, I think we might have a malware infection on the PC that has compromised your MBAM. There's a chance that that is at the root of the Safari issue as well. The Error 2 is an install error generally on MBAM, but if the recent versions are using Advertised shortcuts, that sort of error can show up on a launch too (when the shortcut runs a check against the installation database prior to launching).
See the following bleepingcomputer page for some troubleshooting info on the Error 2. (Try another MBAM install to check to see if you get a 2 again, and if you do, try the instructions.)
[Troubleshoot Malwarebytes' Anti-Malware|http://www.bleepingcomputer.com/virus-removal/how-to-use-malwareby tes-anti-malware-tutorial#troubleshoot]
Message was edited by: b noir -
IPad air safari browser not working properly
Ever since my last update to 8.1, the safari browser on my iPad air 16 Gb has had problems responding. I can search but the links in the search results may or may not respond. Sometimes the links work and sometimes they don't. I have tried closing all the open windows and clearing the safari history and website data. The problem does not go away. Has anyone found a fix for this problem?
Close all Inactive Apps
1. Double-click the Home button to see all Inactive Apps
2. Hold the Apps down for a second or two until you see the minus sign
3. Tap the minus sign to close App
4. Reset iPad. Hold the Sleep and Home button down for about 10 second until you see the Apple logo -
Safari autofill not working properly
Safari no longer autofilling username and passwords. It fills in the username but not the password. But still asks me when I enter them if it would like to remember them for me. I always click yes. I have reset safari a few times. Ran repair permissions. Any ideas?
Are these sites that contain a "Add password to keychain" (or similar) option? If not, then the problem is not with the keychain entries.
One thing users might try is to reset safari using the "Safari" --> "Reset Safari" menu option. Be sure to clear caches as well as clear cookies. -
Hi everyone, I need some help big time. I was currently running the IOS 6.0.1 on my iphone 4 and I could sync and transfer music to my phone via my iTunes account. But I updated my phone to the new IOS 6.1 and now I can not transfer music onto my iphone, all it does is tries to sync the songs but it doesn't. I have uninstalled and reinstalled iTunes back onto my laptop yet it still does not work. Can anyone please help me.
Everything is Sorted!
The release of iTunes 11.0.2 and iOS 6.1.2 for my iPhone 4, seems to have sorted everything. I can now sync music, films and photos between my MacBook and my phone.
I was dubious about blindly doing the updates but decided they couldn't really mess up any further functionality so I went for it and it's sorted now.
Look in to, and take the gamble, it's up to you.
Maybe you are looking for
-
i replaced my phone at apple y'day, due to a broken screen. Brand new phone, but i am unable to connect to wifi, at home or work, so presuming its a fault with the phone? not router, i have also done a software update, is there a solution? thanks
-
Hi, is there any further documentation on external calls in bpels testsuite? I only found http://download-uk.oracle.com/docs/cd/B31017_01/integrate.1013/b28981/testsuite.htm#sthref3734 Is there any sample/demo?
-
IP address not refreshing with new DHCP Server setup
Hi all, This is a strange issue that I am lost. I had a different Gateway with a Built in DHCP server on 192.168.0.1 IP address. I installed a new DHCP Server with an IP address 192.168.1.1, but when I connect to the Wireless network with the correc
-
Can't find library libjsafe.so in LIBPATH (Weblogic 5.1 on AIX 4.3.3)
-
Where does system output go to in Unix?
Where does system output go to in a Unix operating system for java? System.out.println