TSV_TNEW_BLOCKS_NO_ROLL_MEMORY and TSV_TNEW_PAGE_ALLOC_FAILED
Hi All,
I am getting to dumps while running the DTP. they are TSV_TNEW_BLOCKS_NO_ROLL_MEMORY and TSV_TNEW_PAGE_ALLOC_FAILED. These happened only after transporting some transformations from dev to quality. the same DTP's are working fine in DEV. But they are failing in QUA.
I have checked the scenario. At the trasformation the process is getting stopped and from after sometime i am getting the DUMP. can anyone suggest me regarding the same.
Thank You,
Poornima.
Hi All,
I have tried loading two records, its showing the same error.
and i checked out with BASIS they are saying in RZ10 everything is fine.
even while entering into debugging its throwing TIME_OUT.
I am wondering why this is happening again and again
and only for few DTP which has been trasnported is throwing the error.
Kindly suggest.
Thank You,
poornima.
Similar Messages
-
Hi;
Our SAP servers run on Windows Server 2003 Enterprise x64 Edition and Mssql 2005 64 bit. They have 16 Gb Ram and 42 Gb virtual memory.
I have to make system measurement by using tcode USMM. Although there is no problem when i run USMM on our test and productive server, i get a short dump TSV_TNEW_BLOCKS_NO_ROLL_MEMORY or TSV_TNEW_PAGE_ALLOC_FAILED when i run USMM on our development server. I have checked profile parameters. They seem same on all servers. We get the dump only at our development server.
We have upgraded our production and test systems after that we have made system copy from production to development. Only difference is that.
The details for dump is below:
Runtime Errors TSV_TNEW_BLOCKS_NO_ROLL_MEMORY
Date and Time 27.01.2011 10:53:44
Short text
No roll storage space of length 1765392 available for internal storage.
What happened?
Each transaction requires some main memory space to process
application data. If the operating system cannot provide any more
space, the transaction is terminated.
Error analysis
The internal table "\PROGRAM=RSUVM000\FORM=INIT_SYSTEM_DATA\DATA=SYSTEM_DATA[]"
could not be enlarged further.
Memory location: "Session memory"
You attempted to extend the data structure for the management of the
memory blocks for table "\PROGRAM=RSUVM000\FORM=INIT_SYSTEM_DATA\DATA=SYSTEM_DA
TA[]". However, the 1765392 bytes required for
this were no longer available in the specified memory area.
The amount of memory requested is no longer available.
Runtime Errors TSV_TNEW_PAGE_ALLOC_FAILED
Date and Time 27.01.2011 10:11:11
Short text
No more storage space available for extending an internal table.
What happened?
You attempted to extend an internal table, but the required space was
not available.
We have observed that a disp+work.exe is rising to 4 Gb after that system gives the dump.
Is there any advice to solve the problem?
Best regards
NoyanHi Noyan,
FM INT_VCM_GET_MEAS_RESULTS retrieves data from tables
- TUCON
- TUREP (also from client '000')
- TUMSG
- TUMRES
You can compare those tables in SE16 (count entries) on development and other systems. Also you can call this FM iin test mode from SE37 with break-points on every select, that you can see, where your internal table is growing extremely. You may also do this on your Q system in parallel mode to compare it.
If you got the differences you should examine the regarding tables. Maybe there is a missing reorg job on your development system, or you need more memory (higher profile parameters) on this system for this action.
Regards,
Klaus -
Hi All,
We are facing these errors approx. daily (but not everyday):
MEMORY_NO_MORE_PAGING
TSV_TNEW_PAGE_ALLOC_FAILED
Now, I searched the Forum but there is no acceptable answer for the current issue. Some person said that it could be possible if a user have entered any illegal range in program.
How can i modify the parameter values? RZ11 shows all parameters but not in RZ10(where we can modify).
Here is the current configuration:
Roll, extended and heap memory EXTM
ztta/roll_area 3000320 Byte Roll area per workprocess (total)
ztta/roll_first 1024 Byte First amount of roll area used in a dialog WP
ztta/short_area 3200000 Byte Short area per workprocess
rdisp/ROLL_SHM 32768 8 kB Part of roll file in shared memory
rdisp/PG_SHM 16384 8 kB Part of paging file in shared memory
rdisp/PG_LOCAL 150 8 kB Paging buffer per workprocess
em/initial_size_MB 14500 MB Initial size of extended memory
em/blocksize_KB 4096 kB Size of one extended memory block
em/address_space_MB 4096 MB Address space reserved for ext. mem. (NT only)
ztta/roll_extension 2000683008 Byte Max. extended mem. per session (external mode)
abap/heap_area_dia 2000683008 Byte Max. heap memory for dialog workprocesses
abap/heap_area_nondia 0 Byte Max. heap memory for non-dialog workprocesses
abap/heap_area_total 6442450944 Byte Max. usable heap memory
abap/heaplimit 40894464 Byte Workprocess restart limit of heap memory
abap/use_paging 0 Paging for flat tables used (1) or not (0)
I also read that some parameter values like Roll Area should not be changed like here: http://help.sap.com/saphelp_nw70/helpdata/en/02/96274f538111d1891b0000e8322f96/content.htm
Furthermore, some suggestions were to modify the Heap Parameters, Roll etc...
Here is our PRD SPEC:
Processor: Intel Xeon X5450 3.00GHz
RAM: 20 GB
HDD: 140 GB Internal
SAN: 700 GB RAID
Please Advise,
Regards.Hi Michael,
Thank you for your information, here is the current dump (most recent one):
Runtime Errors MEMORY_NO_MORE_PAGING
Date and Time 13.10.2010 14:32:19
How to correct the error
The amount of storage space (in bytes) filled at termination time was:
Roll area...................... 16192
Extended memory (EM)........... 305858320
Assigned memory (HEAP)......... 0
Short area..................... " "
Paging area.................... 16384
Maximum address space.......... " "
And Current View EM (in ST02):
SAP Memory Curr.Use % CurUse[KB] MaxUse[KB] In Mem[KB] OnDisk[KB] SAPCurCach HitRatio
Roll area 40.18 24,274 24,976 262,144 0 IDs 99.59
Page area 10.94 28,678 34,400 131,072 131,072 Statement 97.00
Extended memory 31.43 4,665,344 5,296,128 14,843,904 0 0.00
Heap memory 139,015 0 139,015 0 0.00
Detailed Information:
Roll memory Dialog session kB 2,930
Nondialog sess. kB 2,930
Available kB 60,416
in shared memory kB 262,144
on disk kB 0
Used kB 24,274
Maximum used kB 24,976
Paging memory Session buffer kB 1,200
Available kB 262,144
in shared memory kB 131,072
on disk kB 131,072
Used kB 28,678
Maximum used kB 34,400
Extended memory Dialog session kB 1,953,792
Nondialog sess. kB 1,953,792
Available kB 14,843,904
Used kB 4,665,344
Maximum used kB 5,296,128
Heap memory Dialog session kB 1,953,792
Nondialog sess. kB 0
Used kB 139,015
Maximum used kB 139,015
Current Parameters Setting:
Buffer Name Comment
Profile Parameter Value Unit Comment
Roll, extended and heap memory EXTM
ztta/roll_area 3000320 Byte Roll area per workprocess (total)
ztta/roll_first 1024 Byte First amount of roll area used in a dialog
ztta/short_area 3200000 Byte Short area per workprocess
rdisp/ROLL_SHM 32768 8 kB Part of roll file in shared memory
rdisp/PG_SHM 16384 8 kB Part of paging file in shared memory
rdisp/PG_LOCAL 150 8 kB Paging buffer per workprocess
em/initial_size_MB 14500 MB Initial size of extended memory
em/blocksize_KB 4096 kB Size of one extended memory block
em/address_space_MB 4096 MB Address space reserved for ext. mem. (NT on
ztta/roll_extension 2000683008 Byte Max. extended mem. per session (external mo
abap/heap_area_dia 2000683008 Byte Max. heap memory for dialog workprocesses
abap/heap_area_nondia 0 Byte Max. heap memory for non-dialog workprocess
abap/heap_area_total 6442450944 Byte Max. usable heap memory
abap/heaplimit 40894464 Byte Workprocess restart limit of heap memory
abap/use_paging 0 Paging for flat tables used (1) or not (0)
Please guide me if it requires any further analysis. -
Jobs are failing and give dump "TSV_TNEW_BLOCKS_NO_ROLL_MEMORY"
Hi ,
Jobs are failing and giving dump "TSV_TNEW_BLOCKS_NO_ROLL_MEMORY " and TSV_TNEW_PAGE_ALLOC_FAILED.
Here are the logs:
===================================================================
15.04.2009 07:11:35 Job started 00 516 S
15.04.2009 07:11:35 Step 001 started (program ZAPO_REALIGNMENT_MPOS_PA, variant AP_AP_REALG_S1, user ID aaa_bbb_apo) 00 550 S
15.04.2009 07:12:52 ABAP/4 processor: TSV_TNEW_BLOCKS_NO_ROLL_MEMORY 00 671 A
15.04.2009 07:12:52 Job cancelled 00 518 A
===================================================================
Job log overview for job: BIREQU_4DHSSKZ38YF3KALR4ZBRCDNQT / 00382400
Date Time Message text Message class Message no. Message type
15.04.2009 00:38:24 Job started 00 516 S
15.04.2009 00:38:24 Step 001 started (program SBIE0001, variant &0000000024435, user ID aaa_bbb_APO) 00 550 S
15.04.2009 00:38:24 Asynchronous transmission of info IDoc 2 in task 0001 (0 parallel tasks) R3 413 S
15.04.2009 00:38:24 DATASOURCE = 9AZAP_AM R3 299 S
15.04.2009 00:38:24 ************************************************************************* R8 048 S
15.04.2009 00:38:24 * Current Values for Selected Profile Parameters * R8 049 S
15.04.2009 00:38:24 ************************************************************************* R8 048 S
15.04.2009 00:38:24 * abap/heap_area_nondia......... 2000683008 * R8 050 S
15.04.2009 00:38:24 * abap/heap_area_total.......... 2000683008 * R8 050 S
15.04.2009 00:38:24 * abap/heaplimit................ 100894464 * R8 050 S
15.04.2009 00:38:24 * zcsa/installed_languages...... ED * R8 050 S
15.04.2009 00:38:24 * zcsa/system_language.......... E * R8 050 S
15.04.2009 00:38:24 * ztta/max_memreq_MB............ 256 * R8 050 S
15.04.2009 00:38:24 * ztta/roll_area................ 100000000 * R8 050 S
15.04.2009 00:38:24 * ztta/roll_extension........... 8000683008 * R8 050 S
15.04.2009 00:38:24 ************************************************************************* R8 048 S
15.04.2009 00:38:54 ABAP/4 processor: TSV_TNEW_PAGE_ALLOC_FAILED 00 671 A
15.04.2009 00:38:54 Job cancelled 00 518 A
=================================================================
Please suggestHi,
Here are the details as follows:
ORACLE
10.2.0.2.0
=====
HP-UX
9000/800
====
Kernel release 700
Compilation HP-UX B.11
Sup.Pkg lvl. 108
ABAP Load 1563
CUA load 29
=============
SCM 5.00
SAP_BASIS 700 0011 SAPKB70011
SAP_ABA 700 0011 SAPKA70011
ST-PI 2005_1_700 0003 SAPKITLQI3
PI_BASIS 2005_1_700 0011 SAPKIPYJ7B
SAP_BW 700 0012 SAPKW70012
LCAPPS 2005_700 0004 SAPKIBHD04
SAP_AP 700 0008 SAPKNA7008
EA-IPPE 400 0007 SAPKGPID07
SCM 500 0008 SAPKY50008
SCM_BASIS 500 0008 SAPK-50008INSCMBASIS
QIE 200 0004 SAPK-20004INQIE
BI_CONT 703 0005 SAPKIBIIP5
ST-A/PI 01I_SCM500 0000 -
VIRSANH 530_700 0005 SAPK-53305INVIRSANH
========================
Thanks,
VK -
TSV_TNEW_PAGE_ALLOC_FAILED error in report
Hi Experts,
I am trying to run a report which will retrieve the Active BPs for a particular product Id in CRM environment.
I am trying to run the report on development in background mode.
It is being canceled out and TSV_TNEW_PAGE_ALLOC_FAILED is a DUMP I'm getting several times.
There is chance for selecting a large amount of data.
Please guide me how to resolve the issue.
RegardsHi,
For background processing you need to got sm36 and schedule job. I think the problem occurs in function module. it means new page allocation is failed for the business partner. so it is retriving more than one page active Business partner for the product id.
thanks
Hemant -
Memory overflow in RSA3 but not in FM on which datasource created
Hi
I am getting the short dump in the generic datasource extraction ( To extract CDPOS and CDHDR data) which is based on a FM. when i directly execute the FM its not giving any dump and giving me correct data, but when execute through RSA3, it gives following error. Please help me how can i correct this ?
STORAGE_PARAMETERS_WRONG_SET and TSV_TNEW_PAGE_ALLOC_FAILED errors
Below is the code, highlited is the code which is giving problem.
Declaration
OPEN CURSOR WITH HOLD S_CURSOR FOR
SELECT MANDANT OBJECTCLAS OBJECTID CHANGENR USERNAME UDATE FROM CDHDR
WHERE OBJECTCLAS EQ 'EINKBELEG'
AND OBJECTID IN L_R_OBJECTID
AND UDATE IN L_R_UDATE.
FETCH NEXT CURSOR S_CURSOR
APPENDING CORRESPONDING FIELDS
OF TABLE IT_CDHDR
PACKAGE SIZE S_S_IF-MAXSIZE.
IF SY-SUBRC <> 0.
CLOSE CURSOR S_CURSOR.
RAISE NO_MORE_DATA.
ENDIF.
S_COUNTER_DATAPAKID = S_COUNTER_DATAPAKID + 1.
ENDIF.
**************HERE IS SYSTEM GIVING DUMP
SELECT * FROM CDPOS INTO TABLE IT_CDPOS
FOR ALL ENTRIES IN IT_CDHDR
WHERE OBJECTCLAS EQ IT_CDHDR-OBJECTCLAS
AND OBJECTID EQ IT_CDHDR-OBJECTID
AND CHANGENR EQ IT_CDHDR-CHANGENR
AND TABNAME EQ 'EKKO'
AND FNAME EQ 'FRGZU'.
**************HERE IS SYSTEM GIVING DUMP
Further Processing
LOOP AT IT_CDPOS INTO WA_CDPOS.
READ TABLE IT_CDHDR INTO WA_CDHDR
WITH KEY OBJECTCLAS = WA_CDPOS-OBJECTCLAS
CHANGENR = WA_CDPOS-CHANGENR
OBJECTID = WA_CDPOS-OBJECTID.
WA_DATAPACKAGE-MANDANT = WA_CDPOS-MANDANT.
WA_DATAPACKAGE-OBJECTCLAS = WA_CDPOS-OBJECTCLAS.
WA_DATAPACKAGE-OBJECTID = WA_CDPOS-OBJECTID.
WA_DATAPACKAGE-CHANGENR = WA_CDPOS-CHANGENR.
WA_DATAPACKAGE-VALUE_NEW = WA_CDPOS-VALUE_NEW.
WA_DATAPACKAGE-VALUE_OLD = WA_CDPOS-VALUE_OLD.
WA_DATAPACKAGE-USERNAME = WA_CDHDR-USERNAME.
WA_DATAPACKAGE-UDATE = WA_CDHDR-UDATE.
APPEND WA_DATAPACKAGE TO E_T_DATA.
CLEAR: WA_DATAPACKAGE,WA_CDHDR,WA_CDPOS.
ENDLOOP.
ENDFUNCTION.
Edited by: Tripple k on Oct 21, 2010 6:07 PMHi Rahul
I restricted to 1 data call and 1 record per call in RSA3, still i am getting the same problem.
Regards
Kamal
> Hi,
>
> When your execute through RSA3, there is a limit to the number of records that can be held in the memory while extraction. So it may go for these dumps. You may restrict the number of records by changing Data Records / Calls & Display Extr. Calls while running RSA3. -
Problem with Best Practices Installation Assistant
Hello!
I'm trying to installing the baseline (ecc6) located to portugal, but i'm having lot's of problems with this. when i activate the projects, the system after some minutes stops in the ecatt /SMBA0/SKB1_O12T_J01 and generates the following runtime errors: SYSTEM_NO_ROLL and TSV_TNEW_PAGE_ALLOC_FAILED.
Does anybody knows how to solve this problems?
Thanks,
AnaThe dump TSV_TNEW_PAGE_ALLOC_FAILED occurs, if the workprocess reaches its system imposed maximum memory allocation which can be caused by a program error or by the amount of data becoming too big.
What exactly are your trying to do when THIS dump occurs?
Markus -
Hello,
Happy New Year 2007 to all!
We are using SAP R/3 4.6C, kernel 46D_EXT Patch 2271, Oracle 9.2.0.5 and HP-UX 11.23, 16GB RAM, 17GB swap.
Lately, at the end of this year, many ABAP runtime errors <b>TSV_TNEW_PAGE_ALLOC_FAILED and TSV_TNEW_BLOCKS_NO_ROLL_MEMORY</b> ocured.
Some times there is MEMORY_NO_MORE_PAGING.
I have read some notes regarding this issue.
1. Maybe I should increase the ztta/roll_area, current is 3000000 and to change into 6500000.
2. Can you please advice me regarding the rdisp/ROLL_SHM = 16384 (32768) and rdisp/ROLL_MAXFS = 80000 (131072), should I also increase them into the values in the brackets (there is a note which has the statement 'Must be adjusted if you change ztta/roll_area')?
3. What about the ztta/roll_first = 1 and ztta/roll_extension = 2000000000, should I also change them?
4. Regarding the Paging area, what should I do?
rdisp/PG_SHM = 8192 (32768) and rdisp/PG_MAXFS = 65536 (131072) , should I change into the values in the brackets?
em/initial_size_MB = 4092
THANK YOU in advance,
RuzicaHello Mark,
Yes, I should have told you, the previous day offline backup was performed on the instance, that's why the buffers are clean.
<b>Roll area sizes [kB]</b>
Used Max. used In SHM On disk
46.264 68.856 131.072 508.928 (today)
3.608 68.856 131.072 508.928
3.688 76.224 131.072 508.928
3.440 76.224 131.072 508.928
3.384 76.224 131.072 508.928
3.384 76.224 131.072 508.928
5.904 76.224 131.072 508.928
3.520 76.224 131.072 508.928
3.520 76.224 131.072 508.928
3.384 8.064 131.072 508.928
3.384 9.032 131.072 508.928
3.576 56.656 131.072 508.928
3.576 56.656 131.072 508.928
3.576 56.656 131.072 508.928
3.520 55.464 131.072 508.928
3.384 24.248 131.072 508.928
2.112 119.536 131.072 508.928
2.112 66.040 131.072 508.928
3.384 8.472 131.072 508.928
3.384 8.472 131.072 508.928
3.744 54.456 131.072 508.928
4.048 54.456 131.072 508.928
<b>Page area sizes [kB]</b>
Used Max. used In SHM On disk
69.968 211.624 65.536 458.752 (today)
56 211.624 65.536 458.752
56 524.280 65.536 458.752
56 524.280 65.536 458.752
56 524.280 65.536 458.752
56 524.280 65.536 458.752
7.632 524.280 65.536 458.752
56 524.280 65.536 458.752
56 479.912 65.536 458.752
56 16.072 65.536 458.752
56 16.552 65.536 458.752
56 278.512 65.536 458.752
56 278.512 65.536 458.752
56 278.512 65.536 458.752
56 271.592 65.536 458.752
56 118.384 65.536 458.752
32 290.640 65.536 458.752
32 256.112 65.536 458.752
56 16.096 65.536 458.752
56 16.096 65.536 458.752
56 360.872 65.536 458.752
56 360.872 65.536 458.752
<b> Extended memory sizes [kB]</b>
Used Max. used Available
2.543.616 4.186.112 4.186.112 (today)
77.824 4.186.112 4.186.112
73.728 4.186.112 4.186.112
69.632 4.186.112 4.186.112
69.632 4.186.112 4.186.112
69.632 4.186.112 4.186.112
180.224 4.186.112 4.186.112
73.728 4.186.112 4.186.112
77.824 4.186.112 4.186.112
69.632 139.264 4.186.112
69.632 126.976 4.186.112
73.728 3.178.496 4.186.112
73.728 3.178.496 4.186.112
73.728 3.178.496 4.186.112
77.824 3.178.496 4.186.112
73.728 1.245.184 4.186.112
73.728 4.186.112 4.186.112
77.824 4.186.112 4.186.112
69.632 462.848 4.186.112
69.632 462.848 4.186.112
77.824 4.186.112 4.186.112
86.016 4.186.112 4.186.112
How it looks like?
Can I shortly resume about the memory parameters?
1. em/initial_size_MB, regarding the 16GB of the RAM, should I increase to example: 8188 (the maximum value in RZ11 is 8196)?
2. ztta/roll_area to 6500000 ?
3. What about the rdisp/PG_MAXFS should it be increased for 50% = 131072 ? And the rdisp/PG_SHM to increase to 32768 ?
4. What do you think about the ztta/roll_extension = 2000000000, should I increase or to decrease the parameter?
5. And the roll area is there need to change the rdisp/ROLL_SHM = 16384 (32768) and rdisp/ROLL_MAXFS = 80000 (131072)?
Thanks in advance.
Many regards,
Ruzica -
TSV errors and creation of aggregates
Hi experts,
Since few days, I can't run any more a query. It makes different shorts dumps like :
TSV_TNEW_PAGE_ALLOC_FAILED
TSV_TABH_POOL_NO_ROLL_MEMORY
TSV_TNEW_OCCURS_NO_ROLL_MEMORY
The query is based on a Infocube which contains 3 584 086 records. Once by week, entire data is deleted and reloaded.
There is'n any aggregatesfor this Infocube.
Do you know if the creation of aggregates in order top optimize performance of the query can resolve this kind of technical problem ?
My second part of my question is about aggregates :
In my query, we want to display the masterdata Article (0MATERIAL) and some of his navigation attributes (_Department_, Sub-department, Family). We want to display the plant and one ratio Stock data.
In this query, we make a restriction on a charactestic XXX by excluding a value.
My idea was to create an aggrgate with Article, Department, Sub-department, Family, Plant, and the characteristic XXX with a value excluded.
But when I create the aggregate, I firstly drag and drop the article. But when I want then to drag and drop his navigation attributes, a warning is generate : "Article cannot be in aggregate because of characteristic Department".
- We can't put in an aggregate a masterdata with some of his navigation attributes ?
- Is it possible in an aggregate to restrict a characteristic by excluding a value ? Apparently, we can only add a constant...
I can bring some precisions if it's necessary for better understanding.
Thanks for your precious help,
TempkaHi Tempka,
It seems that there are issues with your roll memory where the memory is not enough to execute your query.
TSV_TNEW_PAGE_ALLOC_FAILED and TSV_TNEW_BLOCKS_NO_ROLL_MEMORY
You will need to get the roll memory extended by contacting your Basis team / ERP team.
Just before you go to ERP team, check if the data base indexes for the info cube on which the query has been developed are fine or not. You can check the DB indexes by following the below steps:
1) Right click the cube, Click on manage.
2) Click on Performance tab,
3) Check DB indexes.
4) If the check shows Red, Then recreate the DB indexes by clicking on "Create DB Index (batch)". Once the indexing is complete try running the report again & see if the error comes.
Also
Thanks
Pawan -
TSV_TNEW_PAGE_ALLOC_FAILED
Dear All,
First let me wish you a very happy and prosperous New Year.
I have one clarification here,
User was running a report with extensive selection,unfortunately the user got the error "TSV_TNEW_PAGE_ALLOC_FAILED"
Then there was shortdump in ST22, saying that " No more storage space available for extending an internal table"
I would like to know that which query was this user running during that time. then i can investigate further what can be done to avoid this problems.
I thank in advance.
Rgds,
Sin
Edited by: sinner icici on Jan 3, 2008 10:57 AMHi,
TSV_TNEW_PAGE_ALLOC_FAILED - No more storage space available for extending an internal table.
It is purely the memory issue. you can resolve this by reducing the data selections. For the temporary solution remove the OLAP variable in the data selection if its there and run with less selection It may help and try to use the option in infopackage scheduler as PSA only and Update subseqently in data targets
SAP Note 425207 - SAP memory management, current parameter ranges
SAP Note 972889 - RMCENEUR: Short dump TSV_TNEW_BLOCKS_NO_ROLL_MEMORY
Thanks,
JituK -
APD returns ABAP Error: TSV_TNEW_PAGE_ALLOC_FAILED
Hi
I'm trying to run APD for a virtual cube.
The design of the APD is as follow:
1. Read a Query (FM of a virtual cube query)
2. Filter the value
3. Aggregate the value
4. Output to text file
If I run RSRT to read the query, I'm able to get the query, and it's returning 936,210 rows.
However, when I run it from APD, it threw me the following errors:
Error analysis
The internal table "\CLASS=CL_RSCRMBW_BAPI\METHOD=GET_AXIS_DATA_V2\DATA=LT_MPP"
could not be further extended. To enable
error handling, the table had to be delete before this log was written.
As a result, the table is displayed further down or, if you branch to
the ABAP Debugger, with 0 rows.
At the time of the termination, the following data was determined for
the relevant internal table:
Memory location: "Session memory"
Row width: 652
Number of rows: 5,027,712
Allocated rows: 5,027,712
Newly requested rows: 16 (in 1 blocks)
Any idea what I can do to rectify this?
Your advice is much appreciated.Hi,
This is a problem related to memory of internal table.
Please check the below links
APD dump TSV_TNEW_PAGE_ALLOC_FAILED
ABAP dump TSV_TNEW_PAGE_ALLOC_FAILED
APD Dump: TSV_TNEW_PAGE_ALLOC_FAILED (but processed in database)
Re: TSV_TNEW_PAGE_ALLOC_FAILED and TSV_TNEW_BLOCKS_NO_ROLL_MEMORY
Hope this helps
Thanks. -
ICR: FBICS3 selects cleared documents and old documents
Hi, I have just gone live with ICR functionality (processes 002 & 003) and I have notice that FBICS3 transaction is not working as I expected:
1/ "Old documents": If I set in the program FBICS3 "year = 2010" & "month = 01"" I expected that the program would select document posted on period 1 year 2010. The reality is that the program has selected data from 2007 to now. I am surprised but probably the problem is that I did not understand how FBICS3 select data. I assume It is correct and was my error. Since fiscal year and period are used to determine the key date of open items (open items "opened" at mm yyyy).
2/But my real problem is that FBICS3 has selected cleared items and shows them on FBICA3 which I am sure is not correct.
Does any body know if there is a SAP note that applies on this issue?
Thanks a lotIn order to give more information:
I have already implemented following SAP Notes
1159776 ICR: Select data from newGL FI-GL-GL-G
1235689 ICR: Runtime error TSV_TNEW_PAGE_ALLOC_FAILED FI-GL-GL-G
1337276 ICR: Cleared documents are not deleted FI-GL-GL-G
Thanks in advance for your help -
Hi All,
I have a report which if i run in background is giving me dump.I am getting tsv_tnew_blocks_no_roll_memory error.I checked in debugging and am pasting the code
where it is failing
Fetching delivery history
SELECT ebeln ebelp zekkn vgabe
gjahr belnr buzei bwart
budat menge xblnr lfbnr
FROM ekbe
INTO TABLE t_ekbe
FOR ALL ENTRIES IN t_eket
WHERE ebeln = t_eket-ebeln
AND ebelp = t_eket-ebelp
AND bwart IN r_bwart.
In the internal table t_eket there are 2400000 records.
Also there are many other hufe internal tables in the run time in program.
I think this error is bacause of memory allocation or lack of it.
So any solutions are most welcome.
I have tried using free itab.
Am verifying it now.
Please suggest.
Thanks in advance,
Saket.Is there a way to filter more data in T_EKET.
2400000 in For all entries is too much for a select query.
Regards,
Mohaiyuddin -
Short Dump TSV_TNEW_PAGE_ALLOC_FAILED
Hi All,
I am facing the short dump "TSV_TNEW_PAGE_ALLOC_FAILED" problem in my PRD system.
Please find ST22 log and suggest the solution:
Runtime Errors TSV_TNEW_PAGE_ALLOC_FAILED
Date and Time 18.11.2009 12:12:09
Short text
No more storage space available for extending an internal table.
What happened?
You attempted to extend an internal table, but the required space was
not available.
What can you do?
Note which actions and input led to the error.
For further help in handling the problem, contact your SAP administrator
You can use the ABAP dump analysis transaction ST22 to view and manage
termination messages, in particular for long term reference.
Try to find out (e.g. by targetted data selection) whether the
transaction will run with less main memory.
If there is a temporary bottleneck, execute the transaction again.
If the error persists, ask your system administrator to check the
following profile parameters:
o ztta/roll_area (1.000.000 - 15.000.000)
Classic roll area per user and internal mode
usual amount of roll area per user and internal mode
o ztta/roll_extension (10.000.000 - 500.000.000)
Amount of memory per user in extended memory (EM)
o abap/heap_area_total (100.000.000 - 1.500.000.000)
Amount of memory (malloc) for all users of an application
server. If several background processes are running on
one server, temporary bottlenecks may occur.
Of course, the amount of memory (in bytes) must also be
available on the machine (main memory or file system swap).
Caution:
The operating system must be set up so that there is also
enough memory for each process. Usually, the maximum address
space is too small.
Ask your hardware manufacturer or your competence center
about this.
In this case, consult your hardware vendor
abap/heap_area_dia: (10.000.000 - 1.000.000.000)
Restriction of memory allocated to the heap with malloc
for each dialog process.
Parameters for background processes:
abap/heap_area_nondia: (10.000.000 - 1.000.000.000)
Restriction of memory allocated to the heap with malloc
for each background process.
Other memory-relevant parameters are:
em/initial_size_MB: (35-1200)
Extended memory area from which all users of an
application server can satisfy their memory requirement.
or analysis
The internal table "\FUNCTION-POOL=EL40\DATA=GL_NODETAB[]" could not be further
extended. To enable
Error handling, the table had to be delete before this log was written.
As a result, the table is displayed further down or, if you branch to
the ABAP Debugger, with 0 rows.
At the time of the termination, the following data was determined for
the relevant internal table:
Memory location: "Session memory"
Row width: 2160
Number of rows: 1782088
Allocated rows: 1782088
Newly requested rows: 4 (in 1 blocks)
to correct the error
The amount of storage space (in bytes) filled at termination time was:
Roll area...................... 4419712
Extended memory (EM)........... 2002743520
Assigned memory (HEAP)......... 2000049152
Short area..................... " "
Paging area.................... 32768
Maximum address space.......... " "
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"TSV_TNEW_PAGE_ALLOC_FAILED" " "
"SAPLEL40" or "LEL40U11"
"ISU_ELWEG_HIERARCHY_BUILD"
Please help me out to resolve the issue.
Regards,
Nitin SharmahI cHANDRU,
tHANKS FOR YOUR RESPONSE:
pLEASE FIND BELOW MENTIONED DETALS:
Operating system..... "Windows NT"
Release.............. "5.2"
Hardware type........ "8x AMD64 Level"
Character length.... 16 Bits
Pointer length....... 64 Bits
Work process number.. 0
Shortdump setting.... "full"
Database server... "SVPSAPECP01"
Database type..... "MSSQL"
Database name..... "ECP"
Database user ID.. "ecp"
Char.set.... "C"
SAP kernel....... 700
created (date)... "Nov 18 2008 22:53:36"
create on........ "NT 5.2 3790 Service Pack 1 x86 MS VC++ 14.00"
Database version. "SQL_Server_8.00 "
Patch level. 185
Patch text.. " " -
BW Error : TSV_TNEW_PAGE_ALLOC_FAILED
Hi All,
While updating data from PSA of an infopackage i got a short dump called TSV_TNEW_PAGE_ALLOC_FAILED.
So,I made the status of infopackage red and deleted the request.
Will the data be there in the PSA?
If yes,then how to upload the data from psa to datatarget.
There are two data targets maintained for this infopackage.
Do i need to schedule the infopackage again.
Please give me the correct solution.
Its very urgent.Hi,
this eroor normally occurs whent he system is unable to allocate main memory requested by the application.
Now,
if it is a delta,
then you have to make sure that the techynical status is red before delting the req.
Now if full
then delete the red req after forced red in both the data targets and re run the infopackage
contact your basis on this error if required
Hope this helps
Janardhan Kumar
Maybe you are looking for
-
IMac G4 Flat Panel set for network start up incorrectly
How do I fix this. I think while I was nosing around I mistakenly set my mothers iMac g4 to start up from network. It is not on a network so...How do I change this start up preference if when it starts up is always searches for a network. I have the
-
How to create single user and bulk users from back end in ebs r12?
Hi all, how to create users from back end in oracle application R with responsibilities? Thanks in Advance, Sandeep Edited by: user2584435 on 17 Nov, 2009 11:14 PM Edited by: user2584435 on 17 Nov, 2009 11:14 PM
-
Photos on Nano - Can I get them back to my computer?
I'll try to be brief. I recently re-installed the operating sys on my macbook. Before I did so I backed up everything (at least I thought I did). My back-up did not contain all of my photos. I thought they were gone, but they are still on my nano. Qu
-
Chinese Language for Nokia 5800 Express Music
I have recently updated my nokia software version from V21.0.025 to V31.0.101 using the nokia software updater. However i notice that my Chinese, Malay & Indonesia languages have all dissapeared. Can anybody help me please.
-
Flash CS3 won't respond after entering s/n
Flash CS3 installs perfectly. Then, I enter the serial number. Then, it does nothing, even though it's there in Task Manager. Next time I run Flash, it does nothing. Why?