TSV_TNEW_BLOCKS_NO_ROLL_MEMORY or TSV_TNEW_PAGE_ALLOC_FAILED

Hi;
Our SAP servers run on Windows Server 2003 Enterprise x64 Edition and Mssql 2005 64 bit. They have 16 Gb Ram and 42 Gb virtual memory.
I have to make system measurement by using tcode USMM. Although there is no problem when i run USMM on our test and productive server, i get a short dump TSV_TNEW_BLOCKS_NO_ROLL_MEMORY or TSV_TNEW_PAGE_ALLOC_FAILED when i run USMM on our development server. I have checked profile parameters. They seem same on all servers. We get the dump only at our development server.
We have upgraded our production and test systems after that we have made system copy from production to development. Only difference is that.
The details for dump is below:
Runtime Errors         TSV_TNEW_BLOCKS_NO_ROLL_MEMORY
Date and Time          27.01.2011 10:53:44
Short text
     No roll storage space of length 1765392 available for internal storage.
What happened?
     Each transaction requires some main memory space to process
     application data. If the operating system cannot provide any more
     space, the transaction is terminated.
Error analysis
     The internal table "\PROGRAM=RSUVM000\FORM=INIT_SYSTEM_DATA\DATA=SYSTEM_DATA[]"
      could not be enlarged further.
     Memory location: "Session memory"
     You attempted to extend the data structure for the management of the
     memory blocks for table "\PROGRAM=RSUVM000\FORM=INIT_SYSTEM_DATA\DATA=SYSTEM_DA
     TA[]". However, the 1765392 bytes required for
     this were no longer available in the specified memory area.
     The amount of memory requested is no longer available.
Runtime Errors         TSV_TNEW_PAGE_ALLOC_FAILED
Date and Time          27.01.2011 10:11:11
Short text
     No more storage space available for extending an internal table.
What happened?
     You attempted to extend an internal table, but the required space was
     not available.
We have observed that a disp+work.exe is rising to 4 Gb after that system gives the dump.
Is there any advice to solve the problem?
Best regards
Noyan

Hi Noyan,
FM INT_VCM_GET_MEAS_RESULTS retrieves data from tables
- TUCON
- TUREP (also from client '000')
- TUMSG
- TUMRES
You can compare those tables in SE16 (count entries) on development and other systems. Also you can call this FM iin test mode from SE37 with break-points on every select, that you can see, where your internal table is growing extremely. You may also do this on your Q system in parallel mode to compare it.
If you got the differences you should examine the regarding tables. Maybe there is a missing reorg job on your development system, or you need more memory (higher profile parameters) on this system for this action.
Regards,
Klaus

Similar Messages

  • TSV_TNEW_BLOCKS_NO_ROLL_MEMORY and  TSV_TNEW_PAGE_ALLOC_FAILED

    Hi All,
    I am getting to dumps while running the DTP. they are   TSV_TNEW_BLOCKS_NO_ROLL_MEMORY and  TSV_TNEW_PAGE_ALLOC_FAILED. These happened only after transporting some transformations from dev to quality.  the same DTP's are working fine in DEV. But they are failing in QUA.
    I have checked the scenario. At the trasformation the process is getting stopped and from after sometime i am getting the DUMP. can anyone suggest me regarding the same.
    Thank You,
    Poornima.

    Hi All,
    I have tried loading two records, its showing the same error.
    and i checked out with BASIS they are saying in RZ10 everything is fine.
    even while entering into debugging its throwing TIME_OUT.
    I am wondering  why this is happening again and again
    and only for few DTP which has been trasnported is throwing the error.
    Kindly suggest.
    Thank You,
    poornima.

  • Jobs are failing and give dump "TSV_TNEW_BLOCKS_NO_ROLL_MEMORY"

    Hi ,
    Jobs are failing and giving dump "TSV_TNEW_BLOCKS_NO_ROLL_MEMORY " and TSV_TNEW_PAGE_ALLOC_FAILED.
    Here are the logs:
    ===================================================================
    15.04.2009 07:11:35 Job started                                                                                00           516          S
    15.04.2009 07:11:35 Step 001 started (program ZAPO_REALIGNMENT_MPOS_PA, variant AP_AP_REALG_S1, user ID aaa_bbb_apo)      00           550          S
    15.04.2009 07:12:52 ABAP/4 processor: TSV_TNEW_BLOCKS_NO_ROLL_MEMORY                                                      00           671          A
    15.04.2009 07:12:52 Job cancelled                                                                                00           518          A
    ===================================================================
    Job log overview for job:    BIREQU_4DHSSKZ38YF3KALR4ZBRCDNQT / 00382400
    Date       Time     Message text                                                                     Message class Message no. Message type
    15.04.2009 00:38:24 Job started                                                                           00           516          S
    15.04.2009 00:38:24 Step 001 started (program SBIE0001, variant &0000000024435, user ID aaa_bbb_APO)      00           550          S
    15.04.2009 00:38:24 Asynchronous transmission of info IDoc 2 in task 0001 (0 parallel tasks)              R3           413          S
    15.04.2009 00:38:24 DATASOURCE = 9AZAP_AM                                                                 R3           299          S
    15.04.2009 00:38:24 *************************************************************************             R8           048          S
    15.04.2009 00:38:24 *          Current Values for Selected Profile Parameters               *             R8           049          S
    15.04.2009 00:38:24 *************************************************************************             R8           048          S
    15.04.2009 00:38:24 * abap/heap_area_nondia......... 2000683008                              *            R8           050          S
    15.04.2009 00:38:24 * abap/heap_area_total.......... 2000683008                              *            R8           050          S
    15.04.2009 00:38:24 * abap/heaplimit................ 100894464                               *            R8           050          S
    15.04.2009 00:38:24 * zcsa/installed_languages...... ED                                      *            R8           050          S
    15.04.2009 00:38:24 * zcsa/system_language.......... E                                       *            R8           050          S
    15.04.2009 00:38:24 * ztta/max_memreq_MB............ 256                                     *            R8           050          S
    15.04.2009 00:38:24 * ztta/roll_area................ 100000000                               *            R8           050          S
    15.04.2009 00:38:24 * ztta/roll_extension........... 8000683008                              *            R8           050          S
    15.04.2009 00:38:24 *************************************************************************             R8           048          S
    15.04.2009 00:38:54 ABAP/4 processor: TSV_TNEW_PAGE_ALLOC_FAILED                                          00           671          A
    15.04.2009 00:38:54 Job cancelled                                                                         00           518          A
    =================================================================
    Please suggest

    Hi,
    Here are the details as follows:
    ORACLE
    10.2.0.2.0
    =====
    HP-UX
    9000/800
    ====
    Kernel release    700
    Compilation       HP-UX B.11
    Sup.Pkg lvl.      108
    ABAP Load         1563
    CUA load          29
    =============
    SCM 5.00
    SAP_BASIS     700     0011     SAPKB70011
    SAP_ABA     700     0011     SAPKA70011
    ST-PI     2005_1_700     0003     SAPKITLQI3
    PI_BASIS     2005_1_700     0011     SAPKIPYJ7B
    SAP_BW     700     0012     SAPKW70012
    LCAPPS     2005_700     0004     SAPKIBHD04
    SAP_AP     700     0008     SAPKNA7008
    EA-IPPE     400     0007     SAPKGPID07
    SCM     500     0008     SAPKY50008
    SCM_BASIS     500     0008     SAPK-50008INSCMBASIS
    QIE     200     0004     SAPK-20004INQIE
    BI_CONT     703     0005     SAPKIBIIP5
    ST-A/PI     01I_SCM500     0000          -
    VIRSANH     530_700     0005     SAPK-53305INVIRSANH
    ========================
    Thanks,
    VK

  • TSV_TNEW_PAGE_ALLOC_FAILED and TSV_TNEW_BLOCKS_NO_ROLL_MEMORY

    Hello,
    Happy New Year 2007 to all!
    We are using SAP R/3 4.6C, kernel 46D_EXT Patch 2271, Oracle 9.2.0.5 and HP-UX 11.23, 16GB RAM, 17GB swap.
    Lately, at the end of this year, many ABAP runtime errors <b>TSV_TNEW_PAGE_ALLOC_FAILED and TSV_TNEW_BLOCKS_NO_ROLL_MEMORY</b> ocured.
    Some times there is MEMORY_NO_MORE_PAGING.
    I have read some notes regarding this issue.
    1. Maybe I should increase the ztta/roll_area, current is 3000000 and to change into 6500000.
    2. Can you please advice me regarding the rdisp/ROLL_SHM = 16384 (32768) and rdisp/ROLL_MAXFS = 80000 (131072), should I also increase them into the values in the brackets (there is a note which has the statement 'Must be adjusted if you change ztta/roll_area')?
    3. What about the ztta/roll_first = 1 and ztta/roll_extension = 2000000000, should I also change them?
    4. Regarding the Paging area, what should I do?
    rdisp/PG_SHM = 8192 (32768) and rdisp/PG_MAXFS = 65536 (131072) , should I change into the values in the brackets?
    em/initial_size_MB = 4092
    THANK YOU in advance,
    Ruzica

    Hello Mark,
    Yes, I should have told you, the previous day offline backup was performed on the instance, that's why the buffers are clean.
    <b>Roll area sizes [kB]</b>
    Used      Max. used      In SHM      On disk
    46.264       68.856     131.072      508.928 (today)
    3.608       68.856     131.072      508.928
    3.688       76.224     131.072      508.928
    3.440       76.224     131.072      508.928
    3.384       76.224     131.072      508.928
    3.384       76.224     131.072      508.928
    5.904       76.224     131.072      508.928
    3.520       76.224     131.072      508.928
    3.520       76.224     131.072      508.928
    3.384        8.064     131.072      508.928
    3.384        9.032     131.072      508.928
    3.576       56.656     131.072      508.928
    3.576       56.656     131.072      508.928
    3.576       56.656     131.072      508.928
    3.520       55.464     131.072      508.928
    3.384       24.248     131.072      508.928
    2.112      119.536     131.072      508.928
    2.112       66.040     131.072      508.928
    3.384        8.472     131.072      508.928
    3.384        8.472     131.072      508.928
    3.744       54.456     131.072      508.928
    4.048       54.456     131.072      508.928
    <b>Page area sizes [kB]</b>
    Used      Max. used      In SHM       On disk
    69.968      211.624       65.536      458.752 (today)
        56      211.624       65.536      458.752
        56      524.280       65.536      458.752
        56      524.280       65.536      458.752
        56      524.280       65.536      458.752
        56      524.280       65.536      458.752
    7.632      524.280       65.536      458.752
        56      524.280       65.536      458.752
        56      479.912       65.536      458.752
        56       16.072       65.536      458.752
        56       16.552       65.536      458.752
        56      278.512       65.536      458.752
        56      278.512       65.536      458.752
        56      278.512       65.536      458.752
        56      271.592       65.536      458.752
        56      118.384       65.536      458.752
        32      290.640       65.536      458.752
        32      256.112       65.536      458.752
        56       16.096       65.536      458.752
        56       16.096       65.536      458.752
        56      360.872       65.536      458.752
        56      360.872       65.536      458.752
            <b> Extended memory sizes [kB]</b>              
    Used            Max. used            Available  
    2.543.616            4.186.112           4.186.112 (today)
       77.824            4.186.112           4.186.112
       73.728            4.186.112           4.186.112
       69.632            4.186.112           4.186.112
       69.632            4.186.112           4.186.112
       69.632            4.186.112           4.186.112
      180.224            4.186.112           4.186.112
       73.728            4.186.112           4.186.112
       77.824            4.186.112           4.186.112
       69.632              139.264           4.186.112
       69.632              126.976           4.186.112
       73.728            3.178.496           4.186.112
       73.728            3.178.496           4.186.112
       73.728            3.178.496           4.186.112
       77.824            3.178.496           4.186.112
       73.728            1.245.184           4.186.112
       73.728            4.186.112           4.186.112
       77.824            4.186.112           4.186.112
       69.632              462.848           4.186.112
       69.632              462.848           4.186.112
       77.824            4.186.112           4.186.112
       86.016            4.186.112           4.186.112
    How it looks like?
    Can I shortly resume about the memory parameters?
    1. em/initial_size_MB, regarding the 16GB of  the RAM, should I increase to example: 8188 (the maximum value in RZ11 is 8196)?
    2. ztta/roll_area to 6500000 ?
    3. What about the rdisp/PG_MAXFS should it be increased for 50% = 131072 ? And the rdisp/PG_SHM to increase to 32768 ?
    4. What do you think about the ztta/roll_extension = 2000000000, should I increase or to decrease the parameter?
    5. And the roll area is there need to change the rdisp/ROLL_SHM = 16384 (32768) and rdisp/ROLL_MAXFS = 80000 (131072)?
    Thanks in advance.
    Many regards,
    Ruzica

  • TSV_TNEW_PAGE_ALLOC_FAILED

    Dear All,
    First let me wish you a very happy and prosperous New Year.
    I have one clarification here,
    User was running a report with extensive selection,unfortunately the user got the error "TSV_TNEW_PAGE_ALLOC_FAILED"
    Then there was shortdump in ST22, saying that " No more storage space available for extending an internal table"
    I would like to know that which query was this user running during that time. then i can investigate further what can be done to avoid this problems.
    I thank in advance.
    Rgds,
    Sin
    Edited by: sinner icici on Jan 3, 2008 10:57 AM

    Hi,
    TSV_TNEW_PAGE_ALLOC_FAILED - No more storage space available for extending an internal table.
    It is purely the memory issue. you can resolve this by reducing the data selections. For the temporary solution remove the OLAP variable in the data selection if its there and run with less selection It may help and try to use the option in infopackage scheduler as PSA only and Update subseqently in data targets
    SAP Note 425207 - SAP memory management, current parameter ranges
    SAP Note 972889 - RMCENEUR: Short dump TSV_TNEW_BLOCKS_NO_ROLL_MEMORY
    Thanks,
    JituK

  • APD returns ABAP Error: TSV_TNEW_PAGE_ALLOC_FAILED

    Hi
    I'm trying to run APD for a virtual cube.
    The design of the APD is as follow:
    1. Read a Query (FM of a virtual cube query)
    2. Filter the value
    3. Aggregate the value
    4. Output to text file
    If I run RSRT to read the query, I'm able to get the query, and it's returning 936,210 rows.
    However, when I run it from APD, it threw me the following errors:
    Error analysis
        The internal table "\CLASS=CL_RSCRMBW_BAPI\METHOD=GET_AXIS_DATA_V2\DATA=LT_MPP"
         could not be further extended. To enable
        error handling, the table had to be delete before this log was written.
        As a result, the table is displayed further down or, if you branch to
        the ABAP Debugger, with 0 rows.
        At the time of the termination, the following data was determined for
        the relevant internal table:
        Memory location: "Session memory"
        Row width: 652
        Number of rows: 5,027,712
        Allocated rows: 5,027,712
        Newly requested rows: 16 (in 1 blocks)
    Any idea what I can do to rectify this?
    Your advice is much appreciated.

    Hi,
    This is a problem related to memory of internal table.
    Please check the below links
    APD dump TSV_TNEW_PAGE_ALLOC_FAILED
    ABAP dump TSV_TNEW_PAGE_ALLOC_FAILED
    APD Dump: TSV_TNEW_PAGE_ALLOC_FAILED (but processed in database)
    Re: TSV_TNEW_PAGE_ALLOC_FAILED and TSV_TNEW_BLOCKS_NO_ROLL_MEMORY
    Hope this helps
    Thanks.

  • MEMORY_NO_MORE_PAGING and TSV_TNEW_PAGE_ALLOC_FAILED

    Hi All,
    We are facing these errors approx. daily (but not everyday):
    MEMORY_NO_MORE_PAGING
    TSV_TNEW_PAGE_ALLOC_FAILED
    Now, I searched the Forum but there is no acceptable answer for the current issue. Some person said that it could be possible if a user have entered any illegal range in program.
    How can i modify the parameter values? RZ11 shows all parameters but not in RZ10(where we can modify).
    Here is the current configuration:
    Roll, extended and heap memory EXTM
    ztta/roll_area        3000320    Byte Roll area per workprocess (total)
    ztta/roll_first       1024       Byte First amount of roll area used in a dialog WP
    ztta/short_area       3200000    Byte Short area per workprocess
    rdisp/ROLL_SHM        32768      8 kB Part of roll file in shared memory
    rdisp/PG_SHM          16384      8 kB Part of paging file in shared memory
    rdisp/PG_LOCAL        150        8 kB Paging buffer per workprocess
    em/initial_size_MB    14500      MB   Initial size of extended memory
    em/blocksize_KB       4096       kB   Size of one extended memory block
    em/address_space_MB   4096       MB   Address space reserved for ext. mem. (NT only)
    ztta/roll_extension   2000683008 Byte Max. extended mem. per session (external mode)
    abap/heap_area_dia    2000683008 Byte Max. heap memory for dialog workprocesses
    abap/heap_area_nondia 0          Byte Max. heap memory for non-dialog workprocesses
    abap/heap_area_total  6442450944 Byte Max. usable heap memory
    abap/heaplimit        40894464   Byte Workprocess restart limit of heap memory
    abap/use_paging       0               Paging for flat tables used (1) or not (0)
    I also read that some parameter values like Roll Area should not be changed like here: http://help.sap.com/saphelp_nw70/helpdata/en/02/96274f538111d1891b0000e8322f96/content.htm
    Furthermore, some suggestions were to modify the Heap Parameters, Roll etc...
    Here is our PRD SPEC:
    Processor: Intel Xeon X5450  3.00GHz
    RAM: 20 GB
    HDD: 140 GB Internal
    SAN: 700 GB RAID
    Please Advise,
    Regards.

    Hi Michael,
    Thank you for your information, here is the current dump (most recent one):
    Runtime Errors         MEMORY_NO_MORE_PAGING
    Date and Time          13.10.2010 14:32:19
    How to correct the error
         The amount of storage space (in bytes) filled at termination time was:
         Roll area...................... 16192
         Extended memory (EM)........... 305858320
         Assigned memory (HEAP)......... 0
         Short area..................... " "
         Paging area.................... 16384
         Maximum address space.......... " "
    And Current View EM (in ST02):
    SAP Memory      Curr.Use % CurUse[KB] MaxUse[KB]  In Mem[KB] OnDisk[KB] SAPCurCach HitRatio
    Roll area           40.18     24,274     24,976     262,144          0   IDs           99.59
    Page area           10.94     28,678     34,400     131,072    131,072   Statement     97.00
    Extended memory     31.43  4,665,344  5,296,128  14,843,904          0                  0.00
    Heap memory                  139,015          0     139,015          0                  0.00
    Detailed Information:
    Roll memory     Dialog session   kB      2,930
                    Nondialog sess.  kB      2,930
                    Available        kB     60,416
                    in shared memory kB    262,144
                    on disk          kB          0
                    Used             kB     24,274
                    Maximum used     kB     24,976
    Paging memory   Session buffer   kB      1,200
                    Available        kB    262,144
                    in shared memory kB    131,072
                    on disk          kB    131,072
                    Used             kB     28,678
                    Maximum used     kB     34,400
    Extended memory Dialog session   kB  1,953,792
                    Nondialog sess.  kB  1,953,792
                    Available        kB 14,843,904
                    Used             kB  4,665,344
                    Maximum used     kB  5,296,128
    Heap memory     Dialog session   kB  1,953,792
                    Nondialog sess.  kB          0
                    Used             kB    139,015
                    Maximum used     kB    139,015
    Current Parameters Setting:
    Buffer Name                    Comment
    Profile Parameter     Value      Unit Comment
    Roll, extended and heap memory EXTM
    ztta/roll_area        3000320    Byte Roll area per workprocess (total)
    ztta/roll_first       1024       Byte First amount of roll area used in a dialog
    ztta/short_area       3200000    Byte Short area per workprocess
    rdisp/ROLL_SHM        32768      8 kB Part of roll file in shared memory
    rdisp/PG_SHM          16384      8 kB Part of paging file in shared memory
    rdisp/PG_LOCAL        150        8 kB Paging buffer per workprocess
    em/initial_size_MB    14500      MB   Initial size of extended memory
    em/blocksize_KB       4096       kB   Size of one extended memory block
    em/address_space_MB   4096       MB   Address space reserved for ext. mem. (NT on
    ztta/roll_extension   2000683008 Byte Max. extended mem. per session (external mo
    abap/heap_area_dia    2000683008 Byte Max. heap memory for dialog workprocesses
    abap/heap_area_nondia 0          Byte Max. heap memory for non-dialog workprocess
    abap/heap_area_total  6442450944 Byte Max. usable heap memory
    abap/heaplimit        40894464   Byte Workprocess restart limit of heap memory
    abap/use_paging       0               Paging for flat tables used (1) or not (0)
    Please guide me if it requires any further analysis.

  • Tsv_tnew_blocks_no_roll_memory error while running a program in background

    Hi All,
                I have a report which if i run in background is giving me dump.I am getting  tsv_tnew_blocks_no_roll_memory error.I checked in debugging and am pasting the code
    where it is failing
        Fetching delivery history
            SELECT ebeln ebelp zekkn vgabe
                   gjahr belnr buzei bwart
                   budat menge xblnr lfbnr
              FROM ekbe
              INTO TABLE t_ekbe
               FOR ALL ENTRIES IN t_eket
             WHERE ebeln = t_eket-ebeln
               AND ebelp = t_eket-ebelp
               AND bwart IN r_bwart.
    In the internal table t_eket there are 2400000 records.
    Also there are many other hufe internal tables in the run time in program.
    I think this error is bacause of memory allocation or lack of it.
    So any solutions are most welcome.
    I have tried using free itab.
    Am verifying it now.
    Please suggest.
    Thanks in advance,
    Saket.

    Is there a way to filter more data in T_EKET.
    2400000 in For all entries is too much for a select query.
    Regards,
    Mohaiyuddin

  • Short Dump       TSV_TNEW_PAGE_ALLOC_FAILED

    Hi All,
    I am facing the short dump "TSV_TNEW_PAGE_ALLOC_FAILED" problem in my PRD system.
    Please find ST22 log and suggest the solution:
    Runtime Errors         TSV_TNEW_PAGE_ALLOC_FAILED
    Date and Time          18.11.2009 12:12:09
    Short text
         No more storage space available for extending an internal table.
    What happened?
         You attempted to extend an internal table, but the required space was
         not available.
    What can you do?
         Note which actions and input led to the error.
         For further help in handling the problem, contact your SAP administrator
         You can use the ABAP dump analysis transaction ST22 to view and manage
         termination messages, in particular for long term reference.
         Try to find out (e.g. by targetted data selection) whether the
         transaction will run with less main memory.
         If there is a temporary bottleneck, execute the transaction again.
         If the error persists, ask your system administrator to check the
         following profile parameters:
         o  ztta/roll_area            (1.000.000 - 15.000.000)
                Classic roll area per user and internal mode
                usual amount of roll area per user and internal mode
    o  ztta/roll_extension       (10.000.000 - 500.000.000)
            Amount of memory per user in extended memory (EM)
    o  abap/heap_area_total      (100.000.000 - 1.500.000.000)
            Amount of memory (malloc) for all users of an application
            server. If several background processes are running on
            one server, temporary bottlenecks may occur.
            Of course, the amount of memory (in bytes) must also be
            available on the machine (main memory or file system swap).
            Caution:
            The operating system must be set up so that there is also
            enough memory for each process. Usually, the maximum address
            space is too small.
            Ask your hardware manufacturer or your competence center
            about this.
            In this case, consult your hardware vendor
    abap/heap_area_dia:        (10.000.000 - 1.000.000.000)
            Restriction of memory allocated to the heap with malloc
            for each dialog process.
    Parameters for background processes:
    abap/heap_area_nondia:        (10.000.000 - 1.000.000.000)
            Restriction of memory allocated to the heap with malloc
            for each background process.
    Other memory-relevant parameters are:
    em/initial_size_MB:         (35-1200)
            Extended memory area from which all users of an
            application server can satisfy their memory requirement.
    or analysis
    The internal table "\FUNCTION-POOL=EL40\DATA=GL_NODETAB[]" could not be further
      extended. To enable
    Error handling, the table had to be delete before this log was written.
    As a result, the table is displayed further down or, if you branch to
    the ABAP Debugger, with 0 rows.
    At the time of the termination, the following data was determined for
    the relevant internal table:
    Memory location: "Session memory"
    Row width: 2160
    Number of rows: 1782088
    Allocated rows: 1782088
    Newly requested rows: 4 (in 1 blocks)
    to correct the error
    The amount of storage space (in bytes) filled at termination time was:
    Roll area...................... 4419712
    Extended memory (EM)........... 2002743520
    Assigned memory (HEAP)......... 2000049152
    Short area..................... " "
    Paging area.................... 32768
    Maximum address space.......... " "
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "TSV_TNEW_PAGE_ALLOC_FAILED" " "
    "SAPLEL40" or "LEL40U11"
    "ISU_ELWEG_HIERARCHY_BUILD"
    Please help me out to resolve the issue.
    Regards,
    Nitin Sharma

    hI cHANDRU,
    tHANKS FOR YOUR RESPONSE:
    pLEASE FIND BELOW MENTIONED DETALS:
    Operating system..... "Windows NT"
    Release.............. "5.2"
    Hardware type........ "8x AMD64 Level"
    Character length.... 16 Bits
    Pointer length....... 64 Bits
    Work process number.. 0
    Shortdump setting.... "full"
    Database server... "SVPSAPECP01"
    Database type..... "MSSQL"
    Database name..... "ECP"
    Database user ID.. "ecp"
    Char.set.... "C"
    SAP kernel....... 700
    created (date)... "Nov 18 2008 22:53:36"
    create on........ "NT 5.2 3790 Service Pack 1 x86 MS VC++ 14.00"
    Database version. "SQL_Server_8.00 "
    Patch level. 185
    Patch text.. " "

  • BW Error : TSV_TNEW_PAGE_ALLOC_FAILED

    Hi All,
    While updating data from PSA of an infopackage i got a short dump called  TSV_TNEW_PAGE_ALLOC_FAILED.
    So,I made the status of infopackage red and deleted the request.
    Will the data be there in the PSA?
    If yes,then how to upload the data from psa to datatarget.
    There are two data targets maintained for this infopackage.
    Do i need to schedule the infopackage again.
    Please give me the correct solution.
    Its very urgent.

    Hi,
    this eroor normally occurs whent he system is unable to allocate main memory requested by the application.
    Now,
    if it is a delta,
    then you have to make sure that the techynical status is red before delting the req.
    Now if full
    then delete the red req after forced red in both the data targets and re run the infopackage
    contact your basis on this error if required
    Hope this helps
    Janardhan Kumar

  • Internal table Memory Issue Exception TSV_TNEW_PAGE_ALLOC_FAILED

    Hi experts,
    I am working on a conversiojn programme. This programme is dealing with 4 input files.
    Each of these files is having more than 50,000 records. I am reading the corresponding application server files to fill
    the internal tables related to these files.
    The files are being read properly and internal tables are being filled.
    However when i try to assign any of these 4 internal tables to other temproray internal tables in programme(requirement)
    i get a dump  TSV_TNEW_PAGE_ALLOC_FAILED.
    The dump is related to memory issue.
    I think The memory available in the programme at this point is not sufficient for table assignment.
    Please suggest any alternatives where i can save any memory .
    Changig of basis setting is not an option.
    Regards,
    Abhishek Kokate

    Hi Kiran,
    I am not agree with you , I am agree with Hermann.
    While writting file you restrict the record max 5,000 to 10,000 records and process don't store the mutch data into internal table.
    After every used refresh the internal table, Declare table where necessary.
    But you can try to avoid the copy cost.
    Rgds
    Ravi Lanjewar

  • Production error - Urgent -  TSV_TNEW_PAGE_ALLOC_FAILED

    Hi All,
    Im getting dumps in production system with
    Runtime Error:          TSV_TNEW_PAGE_ALLOC_FAILED. and when checked the trace, it says as Data type "MCVBAPB" was found in a newer version than required.
    Any pointers to this wil be helpful
    thanks
    Booma

    the TSV_TNEW_PAGE_ALLOC_FAILED dump has naught to do with the version of MCVBAPB. the dump clearly states that there was no more paging area available to run the report/transaction that caused the dump. this might either be due to an too big selection or a lack of memory. Consult your basis-people with that one.
    the version of MCVBAPB: MCVBAPB is a structure belonging to LIS (Logistics Information System) so obviously someone changed that structure. check in t-code SE11, MCVBAPB the runtime and the database object of the structure (in case it is active).

  • Run time error : TSV_TNEW_PAGE_ALLOC_FAILED in st22

    Hi All,
    we are getting runtime error : TSV_TNEW_PAGE_ALLOC_FAILED in production system. for this report rsppfprocess we have batch jobs so may be its running all the action definition and coming up with consuming more memory ? we already checked with basis but they are saying its rsppfprocess program issue. can you please guide me how to solve this issue.
    Jimmi.

    Hi Jimmi,
    The error TSV_NEW_PAGE_ALLOC_FAILED means that more memory was requested
    because the program needed to expand an internal table, but is not available.
    When Extended Memory is used up, the process will go into PRIV mode
    as it starts using Heap Memory  (or vice-versa).  No other user will be able to use this work process while it is in PRIV mode.
    If there is enough heap for it to finish, you will not see the error TSV_NEW_PAGE_ALLOC_FAILED and the work process will be freed.
    This seems to be a problem with loading of shared memory.
    Check value of parameter abap/shared_objects_size_MB in RZ11.
    Set the parameter to minimum 250 and increase it when necessary, as per SAP note 1281896. You must start the system newly so that the change becomes effective.
    Also take a look at SAP Note 1166259.
    Gervase

  • ABAP/4 processor: TSV_TNEW_PAGE_ALLOC_FAILED

    Hi,
    Please help me. I'm having ABAP/4 processor: TSV_TNEW_PAGE_ALLOC_FAILED job cancelled for my payment run F110.
    Before this we having performance issue for the payment run F110. We implemented notes (SNOTE 1343823) to solve the performance issue. And today when we wanted to do payment run some of the payment run is automatically cancelled by system.
    Tq

    hi,
    Try this Note 1250607 - Long runtime and high memory reqmt for payment program
    thanks and regards
    Praveen.J

  • Error TSV_TNEW_BLOCKS_NO_ROLL_MEMORY when reading into internal table

    Hello guys,
    below are snippets of my code and when its goes into the select statement, i get this error TSV_TNEW_BLOCKS_NO_ROLL_MEMORY. Do you have any idea what went wrong? here are the table declaration and select statement.
                                  BEGIN OF ty_instfact,
                                   ucinstalla           TYPE
                                   /bi0/oiucinstalla,
                                   ucoperand             TYPE
                                   /bi0/oiucoperand,
                                   ucop_str1           TYPE /bi0/oiucop_str1,
                                  END   OF ty_instfact
      DATA :           i_instfact TYPE STANDARD TABLE OF ty_instfact.
      SELECT ucinstalla ucoperand ucop_str1
          FROM /bic/azinf_d0100
          INTO TABLE i_instfact
          FOR ALL ENTRIES IN RESULT_PACKAGE
          WHERE ucinstalla EQ RESULT_PACKAGE-ucinstalla
          AND ucinstalla > 0
          AND ucoperand = 'E-NSRD'
          OR ucoperand = 'G-NSRD'.

    Hello All,
    SAP came back to me regarding this issue. There are only way to eliminate this error is to:
    - use InfoSet rather than JOIN
    - increase Extended Memory or Heap Memory for Background WP.
    We have doubled the memory per process (4-->8GB) and it works fine now.
    Kind regards,
    Roman

Maybe you are looking for

  • Starting a specific managed server with a different JVM.

    Hello! We have a Weblogic (11g 10.3.6.0) Domain created using the Configuration Wizard (WL_HOME/common/bin/config.sh). This domain was configured to use Oracle JRockit JVM. So, all managed servers in this domain uses JRockit. But for some test/P.O.C

  • Problem with the workbook after upgrade

    Hi all, We are facing some problems with the workbooks after BW 3.5 Upgrade.e.g. some templates are disturbed, some variables have been affected. So I have few doubts -- 1. What could be the possible reason behind this? 2. What exactly got changed in

  • Editing Image From PDF File To Use in AI Document

    Hello, I am a beginner user of AI and am having trouble with editing certain images from PDF files on Illustrator. I'm not even sure what I'm trying to do can be done on Illustrator or requires Photoshop. A) Here is the first example (Note that this

  • Is  a Canon Vixia HF R30 compatible with Final Cut X?

    Is a Canon Vixia HF R30 compatible with Final Cut Pro X?

  • Apple mobile device helper - constant crashing

    i recently downloaded and installed the latest version of itunes onto my vista laptop, every few seconds a window pops up saying 'AppleMobileDeviceHelper has stopped working. A problem caused the program to stop working correctly....' anyone else get