'turning off' all filters from multiple clips at once???

FCP 5.1.4
Is there a way to collectively disactivate or turn off the filters on a group of clips all at once?
I'm making a spot using the material from the film. The master film sequences have a lot of filters assigned ... but the sequences are no longer rendered. I want to pull diverse shots from the film without having to either render, or delete the filters. Once the clip is cut I'd like to be able to just turn the filters back on prior to exporting the new clip out.
All ears,
Ben

Is there a way to collectively disactivate or turn off the filters on a group of clips all at once?
As already mentioned, no.
However, you can turn off filters for an entire sequence. Go to Sequence Settings (Command-0, that's zero) then the Render Control tab and uncheck the Filters checkbox. Of course, be sure to toggle it back on before you export.
Not sure how well this translates to nested sequence though...

Similar Messages

  • Remove filters from multiple clips

    Is there any way of deleting effects filters from multiple clips, a reverse of the paste effects or paste attributes functions?

    Brilliant - Sounds so logical when you know how.
    You have saved me hours.
    Thanks

  • How to get the menu bar back after turned off all toolbars from the "View" menu

    Do this: turn OFF all toolbar view from the view menu, with the Menu toolbar the last one.
    Problem: cannot find any UI to turn it back, stuck with a bare window, except the tab list.
    == This happened ==
    Every time Firefox opened
    == turn OFF all toolbar view from the view menu, with the Menu toolbar the last one.

    Press the Alt key, this temporarily brings up the menu bar. You an then use the View menu to re-select the menu bar.

  • Essbase cannot union filters from multiple groups

    Hi All,
    I got a problem to provisioning on Shared Service.
    In some case, I need to grant multiple filters to a Essbase users, say user01.
    However, each user can associated one Essbase filter only.
    For better management, I create multiple groups with different filters and assign the user, user01, into the groups.
    For first two groups are working normally. However, Essbase cannot "union" all filters from multiple groups after the users join the third groups.
    However, I try to combine the three filter into a filter with three rows. It is working!!!
    It is because there are large number of users in external LDAP. It is unmanageable when combining multiple filters into a filters. Is there any way to solve this problem? or is there any better approach to do the security ?
    Thanks in advance!!!
    Regards,
    TKC

    Thanks for your reply.
    I have following structure in Essbase. I try to make it simple to understand.
    Dept (dimension)
    |_C00
    |_CTTL
    |_C01
    |_C02
    Project (dimension)
    |_GEN
    |_P01
    |_P02
    |_P03
    |_PI
    |_A
    |_P01 (shared member)
    |_B
    |_P02 (shared member)
    |_P03 (shared member)
    Group A with Filter F01
    Read - CTTL, IDESCENDENT(A)
    Group B with Filter F02
    Read - C01, P01, P02
    User joins A and B group.
    The end result of user is that
    he can access CTTL of P01 only
    he can access C01 of P01 and P02 only
    he cannot access C02 of any Project dimension
    he cannot access CTTL of P03
    However, I found that when I change to metaread. The result is going wrong.
    he can access C01 of P01, P02 and P03 only.
    It is because I need to block user to view members which he cannot access.
    I need "metaread" function.
    So somebody tell me how to achieve this? Thanks in advance.
    Edited by: user070322 on Jan 4, 2009 8:37 PM
    Edited by: user070322 on Jan 5, 2009 6:04 PM

  • In preview all is good...burning dvd the music cuts out 2 times in 4 songs...i have turned off all other programs, sleep and energy mode for battery...multiple tries... same result ...help

    IDVD - in preview all is good...burning dvd the music cuts out 2 times in 4 songs...i have turned off all other programs, sleep and energy mode for battery...multiple tries... same result ...help

    Hi
    No audio on DVD disc.
    Most common origin.
    1. Imported audio from iTunes.
    • In iTunes copy out as an audio-CD .aiff
    • Use this in Your movie project
    2. Low - Free Space on Start-up/Boot/Internal/Mac OS Hard disk makes it hard for iMovie to work as intended.
    Down to 1.3 GB and it doesn’t work - especially audio don’t migrate over to Media Browser
    (iM’08 & 09)
    3. Material in iMovie’08 & 09 - Shared to Media Browser and here selected as Large
    large.m4v. It silenced out this project in iDVD. By making a slight alteration - provocing it to ask for a new Share/Publish to Media Browser and here selecting 640x480 - and audio was back when a new iDVD project was created including this movie.
    176x144
    480x360
    640x480
    720x540    960x540
    4. Strange audio formats like .mp3, .avi etc.
    • Change them to .aiff. Use an audio editor like Audacity (free)
    5. Main audio is set to off in System Preferences - Does this by it self - Don’t know why
    Cheque Audio-Out resp. Audio-In
    6. Ed Hanna
    Had the same problem; some Googling around gave me a kludgy, but effective fix
    Downgrade Perian from recent versions back to version 1.0.
    That worked for me, and so far I haven't encountered any deficiencies—except it takes more advanced versions of Perian to enable QuickTime to handle subtitles in .srt format—that I have noticed.
    7. GarageBand fix.
    In this set audio to 44.1 kHz (Klaus1 suggestion)
    (if this don’t work try 48 kHz - me guessing)
    Before burning the DVD.
    • Do a DiskImage (File menu and down)
    • Double click on the .img file
    • Test it with Apple DVD-player
    If it’s OK then make Your DVD.
    Burn at x1 speed.... (or x4)
    • In iDVD 08 - or - 09
    • Burn from DiskImage with Apple’s Disk Utilities application
    • OR burn with Roxio Toast™ if You got it
    Yours Bengt W

  • HT1695 Recently my iphone is consuming too much data, I have installed a data monitoring app and I found that - although I turned off all notifications and push email - push services is using around a 1mega/hour from cellular data (even if I am using wi-f

    Recently my iphone is consuming too much data, I have installed a data monitoring app and I found that - although I turned off all notifications and push email - push services is using around a 1mega/hour from cellular data (even if I am using wi-fi) !!!

    cpupower frequency-info
    analyzing CPU 0:
    driver: acpi-cpufreq
    CPUs which run at the same hardware frequency: 0 1 2 3
    CPUs which need to have their frequency coordinated by software: 0
    maximum transition latency: 10.0 us.
    hardware limits: 800 MHz - 2.30 GHz
    available frequency steps: 2.30 GHz, 2.30 GHz, 1.80 GHz, 1.60 GHz, 1.40 GHz, 1.20 GHz, 1000 MHz, 800 MHz
    available cpufreq governors: conservative, powersave, ondemand, performance
    current policy: frequency should be within 800 MHz and 2.30 GHz.
    The governor "conservative" may decide which speed to use
    within this range.
    current CPU frequency is 800 MHz.
    cpufreq stats: 2.30 GHz:0,02%, 2.30 GHz:0,05%, 1.80 GHz:0,05%, 1.60 GHz:0,03%, 1.40 GHz:0,01%, 1.20 GHz:0,16%, 1000 MHz:0,38%, 800 MHz:99,29% (1017)
    boost state support:
    Supported: yes
    Active: yes
    25500 MHz max turbo 4 active cores
    25500 MHz max turbo 3 active cores
    25500 MHz max turbo 2 active cores
    25500 MHz max turbo 1 active cores
    Thax

  • How do I turn off all clip audio so only music track is heard?

    How do I turn off all audio that is with the original video track so that only the audio soundtrack music will be heard?

    Add the clip then click the gear icon on the clip and choose Audio Adjustments… reduce the volume to zero. - JamesJM

  • I, too, keeping getting a pop up when in Safari that is from "tap-security.rubicon....  I saw the suggestion to turn off all extensions, but this didn't help.  What next can be done?

    I read that several other people have been bothered by a drop down message talking about a bad certificate and perhaps non secure site when working in Safari.  I, too, keeping getting this pop up when in Safari that is from "tap-security.rubicon....  I saw the suggestion to turn off all extensions, but this didn't help.  What next can be done?

    Helpful Links Regarding Malware Problems
    If you are having an immediate problem with ads popping up see The Safe Mac » Adware Removal Guide, AdwareMedic, or Remove unwanted adware that displays pop-up ads and graphics on your Mac - Apple Support.
    Open Safari, select Preferences from the Safari menu. Click on Extensions icon in the toolbar. Disable all Extensions. If this stops your problem, then re-enable them one by one until the problem returns. Now remove that extension as it is causing the problem.
    The following comes from user stevejobsfan0123. I have made minor changes to adapt to this presentation.
    Fix Some Browser Pop-ups That Take Over Safari.
    Common pop-ups include a message saying the government has seized your computer and you must pay to have it released (often called "Moneypak"), or a phony message saying that your computer has been infected, and you need to call a tech support number (sometimes claiming to be Apple) to get it resolved. First, understand that these pop-ups are not caused by a virus and your computer has not been affected. This "hijack" is limited to your web browser. Also understand that these messages are scams, so do not pay any money, call the listed number, or provide any personal information. This article will outline the solution to dismiss the pop-up.
    Quit Safari
    Usually, these pop-ups will not go away by either clicking "OK" or "Cancel." Furthermore, several menus in the menu bar may become disabled and show in gray, including the option to quit Safari. You will likely have to force quit Safari. To do this, press Command + option + esc, select Safari, and press Force Quit.
    Relaunch Safari
    If you relaunch Safari, the page will reopen. To prevent this from happening, hold down the 'Shift' key while opening Safari. This will prevent windows from the last time Safari was running from reopening.
    This will not work in all cases. The shift key must be held at the right time, and in some cases, even if done correctly, the window reappears. In these circumstances, after force quitting Safari, turn off Wi-Fi or disconnect Ethernet, depending on how you connect to the Internet. Then relaunch Safari normally. It will try to reload the malicious webpage, but without a connection, it won't be able to. Navigate away from that page by entering a different URL, i.e. www.apple.com, and trying to load it. Now you can reconnect to the Internet, and the page you entered will appear rather than the malicious one.
    An excellent link to read is Tom Reed's Mac Malware Guide.
    Also, visit The XLab FAQs and read Detecting and avoiding malware and spyware.
    See these Apple articles:
      Mac OS X Snow Leopard and malware detection
      OS X Lion- Protect your Mac from malware
      OS X Mountain Lion- Protect your Mac from malware
      OS X Mavericks- Protect your Mac from malware
      About file quarantine in OS X
    If you require anti-virus protection Thomas Reed recommends using ClamXAV. (Thank you to Thomas Reed for this recommendation.)

  • Turning off MAC filtering

    I can't connect to the internet and the problem is with my airport extreme/leopard. I need to find out how to cut off the MAC address filtering to allow my iPhone and windows computer to connect to the internet. I have the modem ethernet plug in my airport, and another ethernet cable coming from that to my windows PC. Both the PC and my iPhone get the 169 IP address and the subnet of 255.255.0.0, so this is an issue with the security on my airport extreme. This issue wasn't there when I had tiger installed but I recently upgraded to Leopard and all of a sudden this is an issue. How do you turn off MAC filtering as I am sure this is the issue holding me up.

    Open the Airport Utility, which is in Applications > Utilities.
    Select your Airport Extreme and click "Manual Setup".
    Choose the Access Control tab.
    Set MAC Address Access Control to "Not Enabled" and click "Update".

  • Turn off all transitions?

    Does anyone know of a way to turn off all transitions?  I seem to spend a lot of time turning these little buggars off.
    Thanks.

    What's new in iMovie ’11 
    Learn all about the new features in iMovie.
    Support Communities  Seek help from other iMovie users.
    http://www.bing.com/search?q=upload+imovie+to+youtube
    This thread has "more like this" on the right side that fit into your topic needs _iMovie forum would be the place to look and ask_
    https://discussions.apple.com/thread/5139502?tstart=0
    The other issue is your hard drive, free space, corrupt directory or something, and you first need to insure backup, have used Mountain Lion Recovery Mode to repair the drive and system partition both, and do a safe boot on restart to assist.
    You have multiple other devices - try disconnecting those and wifi and try again also as a test and troubleshoot if the error still occurs.
    Modem issue is likely a separate issue of its own to deal with or may be the source of trouble. Any modem (and router) should be on filter/surge proection (UPS even better) and ISP can log into the modem and see if there are errors or packets being thrown away or other errors. (I keep a safe spare on hand for troubleshooting, and have cable and cat5 cable running thru UPS as we get more than enough storms and knocking out power is a lot of trouble). Your service or your needs may be different.

  • How do I turn off all alerts for a specific email account

    I want to disable all notifications for a specific email account and I can't find the options to do this. So basically I have 3 email accounts linked on my blackberry. I and I want to make it so that any time account #3 gets an email I don't get a red flashing light or a new message * anywhere. I case you're wondering I've funneled all those annoying promo adds to this one account. It's just that sometimes some of them actually have good deals so I want to be able to check them every now and then but it's seriously annoying when my red light is going off constantly. NEVER MIND! I found it, but I'm going to leave this here incase anyone else it looking for something like this. You go into notification profiles and change the settings for that profile. So it's :   Notifications -> Profiles -> Normal (or which ever one you want) -> Customize App Notifications -> Email Messages -> Select email account you want -> Turn off all notifications or modify them to your preference. It does suck that you can't just globally set it by email account. It seems you have to go through each profile and change the settings one at a time. Most people probably only have 3 though so it's not that big a deal #firstworldproblems. DOUBLE NEVER MIND! So the "solution" I mentioned above only seems to work for the LED indicator and the instant popup you that comes on the top of the screen when you get a new notification. I'm still getting the red "new email" star on the side bar when I do a quick look from the homescreen or an app. And the 3rd email account has a "new email" red star next to it as well. Hoping someone out there knows how to turn them off for a specific email account. Thanks. - Kbye

    Hi, I am using German OS therefore maybe the items are called differently in English: 1) Go into the main menu 2) Select "Alerts" 3) select the Profile you like to adjust 4) Select App Alerts 5) Select Email 6) You sould see your 3 mail accounts listed 7) Select the one you like to "mute" and you can set everything (sound, LED, vibration etc. individually for this acount) Hope it helps Alex

  • Hello MacHeads: I downloaded Handbrake 0.9.1 for Tiger, so I can upload a homemade DVD for editing in imovie.  Problem is I can't even access Handbrake Help book, because I think my firewall settings are preventing me.  I tried turning off all my firewall

    Hello MacHeads: I downloaded Handbrake 0.9.1 for Tiger, so I can upload a homemade DVD for editing in imovie.  Problem is I can't even access Handbrake Help book, because I think my firewall settings are preventing me.  I tried turning off all my firewall settings.?  IDK if I'm even doing that right.  Can anyone help out here?

    You don't need Handbrake for that if it is your own DVD.
    You need to convert the VOB files in the TS-Folder of the DVD back to DV which iMovie is designed to handle.
    a DVD is in a compresed format called mpeg2, which is standard across all DVDs. This is what is known as a 'final delivery format' and is not suitable for editing. Because is is compressed, a 4.7GB DVD can hold a two hour movie (dual layer DVDs twice that), whereas the DV stream from a video camera, which runs at about 13GB per hour, is not compressed and IS intended for editing.
    In other words you have to 'reverse engineer' the DVD back to an uncompressed format in ordfer to edit it. There is a penalty for doing this in terms of slight quality loss, but it is one you can live with.
    When you have your DVD as an icon on your desktop, double-click it, and it will open to reveal a TS-Folder containing a number of various files, some called VOB. These are the constituent parts of any video DVD.
    When you have downloaded and installed mpegStreamclip, and purchased and installed the Apple mpeg2 plugin, open mpegStreamclip and drag the entire TS Folder into its window. Then using the various menus available to you (just explore them and you will get the hang of it) ask it to convert to DV.
    That DV file, which will be many times larger than the original TS Folder, and which can a while to create (be patient - make coffee or prune the roses!) is what you can now import into iMovie for editing etc.
    When you have finished doing that, you then have to turn the project back into a DVD.
    mpegStreamclip can be downloaded from here:
    http://www.apple.com/downloads/macosx/video/mpegstreamclip.html
    which is free, but you must also have the  Apple mpeg2 plugin :
    http://www.apple.com/quicktime/mpeg2/
    which is a mere $20.
    Another possibility is to use DVDxDV:
    http://www.dvdxdv.com/NewFolderLookSite/Products/DVDxDV.overview.htm
    which costs $25.
    For the benefit of others who may read this thread:
    Obviously the foregoing only applies to DVDs you have made yourself, or other home-made DVDs that have been given to you. It will NOT work on copy-protected commercial DVDs, which in any case would be illegal.

  • I am trying to download the trial version and I get to the Adobe Assistant Download complete, but then NO file allows for download.  I have turned off all blocks, looked in Explorer, I have spent about 3 hours doing this... HELP

    I am trying to download the trial version and I get to the Adobe Assistant Download complete, but then NO file allows for download.  I have turned off all blocks, looked in Explorer, I have spent about 3 hours doing this... HELP

    I personally try to avoid that "download assistant" whenever possible...
    Download the offline installer from http://prodesigntools.com/adobe-acrobat-xi-pro-standard-reader-direct-download-links.html
    Make sure you follow the Very Important Instructions on that page.

  • Going overseas turning off all unnecessary data updates

    We're going overseas and have read we should turn off all unnecessary data updates. What would one turn off? Any advise would be appreciated. Thanks

    Very good question, as too many people don't ask it and are confronted with huge bills coming home from a holiday.
    The answer of wjosten is applicable when you don't want to make or to be able to receive calls or send/receive SMS messages. In short: you'll use your iPhone at WIFI spots to access the internet.
    If would like to remain reachable and be able to make calls I recommend your turn off all data usage through telephony networks when abroad, which you can do in Settings -> General -> Network -> Data Roaming
    Note that generally when abroad you'll pay when answering a call and, optionally, receiving an SMS. Your service provider should be able to provide with the rates for this, as well as the rates for making a call or sending an SMS from the country you're in.
    To check your e-mail and browse the web follow the advice of wjosten and look for WIFI networks on you destination. Even if they're not free, they are for sure cheaper than using the telephone network via your iPhone.
    Eric

  • How to turn off all colour management?

    I need to have Photoshop show me an image without any colour management at all.
    However, no matter what settings I try the image in Photoshop always looks different to the same image opened in a program that is not ICC complient.
    This is causing me serious problems.
    What do I need to do to turn off all ICC management?

    The quickest way is to choose View - Proof Setup in Photoshop and just select Monitor RGB.  When View - Proof Colors is selected, you will see unaltered data, as Photoshop is being told that the image should be viewed as though its profile is the same as the monitor's profile.
    However, it is not difficult to get Photoshop to send unaltered values from an sRGB document to your display without using Proof viewing.  My system is set up this way as I have my video card tables and monitors set up to accurately show sRGB.
    Here's how:
    1.  Start the Windows 7 control panel Color Management function, Devices tab, and uncheck [ ] Use my settings for this device.
    2.  In the Advanced tab, ensure that Windows Color System Defaults is System default (sRGB IEC61966-2.1).
    Voila, Photoshop considers the monitor as having the sRGB profile, and you'll see the exact same color values from an sRGB image as from a non-color-managed application.
    Photoshop will also display colors from documents with other profiles correctly, as they are transformed to sRGB for display.
    FYI, I have the ATI Catalyst display manager load my video card color settings at startup.
    Hope this helps.
    -Noel

Maybe you are looking for