Turning off Power sound

How do I turn off the sound when powering on/off ?  The folks at the Verizon store were of no help.  So far I love my Droid X but I do not like the sound when Powering on/off.  The only silent mode I can find silences everything.  I do want the ringer on.

It appears there are two solutions to silencing these tones.
1) Before powering off, turn on Silent Mode.  That will kill the power off beep, and it will power back on with silent mode still set to on, and with no sounds at all.  Then just turn Silent Mode off.  Of leave it alone if like lots of silence including no phone call rings etc.!!
2) In Settings, Sound, un-check the option for SD card notifications.  You will still get a beep on power off, but no music on power on - it is completely silent.

Similar Messages

  • Turn off Power Cable Connect Sound in iPhone5

    I would like to turn off the sound you get when you connect the power cable to the iPhone5.  Does anyone know how to do this?  Silencing all sound is not an option, as I still want to use the alarm clock function.

    Flip the Ring/Silent switch. Alarms still work with this switched on.

  • I have read the thread about turning off dialpad sounds when calling a number. I used to always be able to do this on my 4S but not so since the latest software on the 5. Keyboard clicks are turned off and still have dialpad sound. I've NEVER had to mute.

    I have read the thread about turning off dialpad sounds when calling a number. I used to always be able to do this on my 4S but not so since the latest software on the 5. Keyboard clicks are turned off and still have dialpad sound. I've NEVER had to mute to dial before.

    I really do not think it is the iPad or your network connection. Other users have reported this very same issue. Try this and see if it works for you - it may not work - but it's easy to try - harmless - and it has worked in the past for others.
    Try signing out of your account and restart your iPad.
    Go to Settings>Store>Apple ID and tap the ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button. Go back to Settings>Store> Apple ID and sign in again.

  • TS4006 Turn off play sound

    How to turn off play sound on find my iPhone app?

    This horrible, loud, and obnoxious ding, ding, ding, ding (and on for ten dings total in descending volume) plays about 30 times for a total on 2 minutes.  It will stop itself.  It used maybe about 1% of the battery power on my iPhone 5.  I tested it, and I clocked it twice:  that's all the torture I could tollerate.

  • Turn off the sound for a while, and cannot turn it on (louder) anymore

    I have a Java application which plays sound (beep). After I turn off the sound using sound control key (lower) on the key board for a while, I will not bring the sound back using the sound control key (louder).
    Whenever this happened, my application's CPU usage is above 100%. I am not sure the sound issue caused by my application or by Intel computer itself. I don't have this problem with PowerPC computer.
    Ajia

    That is the sound that all IOS devices make when you swipe to Unlock and turn them off using the Power button. Is that what you are referring to?
    Cheers,
    GB

  • How can I turn off the sound from the original midi  or audio tracks when I turned on the duplicate tracks for editing ?

    How can I turn off the sound from the original midi or audio tracks when I edit or listen to the duplicate tracks in Logic Pro 9 ?
    I'm using iMac desktop with Mac OS X Version 10.7.3. Pls advise.

    Dan,
    It sounds like one of your preferences has changed.
    Go to preferences > audio > general, and make sure "track mute/solo" is set to "CPU saving (slow response)". It is probably set to "Fast " at the moment.
    This setting (fast) basically causes immediate muting from the channel strip while your song is in play. This is because the audio is still being read from the hard drive, but the channel strip is simply muted.... like a hardware mixer. When set to "CPU saving", the audio from that track, when muted, is actually stopped from streaming from the hard drive, but there is a couple second delay before the audio is actually muted.
    One would think that the fast setting is generally preferable, except when you need to do what you are doing. The only way to keep duplicate copies of channel strips acting independent of one another is to leave this setting on the "CPU saving" setting.
    Hope that helps

  • How do I TURN OFF power management???

    My computer still keeps going to sleep and the only way to wake it up is to hit the reset button.  I tried enabling the keyboard-wake-up to wake it up, but then it started rebooting itself spontaneously every 15 minutes -- without any warning from Windows.  It doesn't matter whether I select S1/POS or S3/STR mode -- it does the same thing every time.  I don't want S1 or S3 power management.  I want to TURN OFF POWER MANAGEMENT COMPLETELY!  I only want Windows to turn off the monitor.  The BIOS should do nothing!
    How do I accomplish this??????????
    BIOS v1.3
    NEO2-LS
    Quickboot - disabled
    IDE Busmaster - disabled
    ATA mode - native
    ATA config - P-ATA only
    Performance mode - slow
    dynamic overclocking - disabled
    S.M.A.R.T. for hd enabled
    Power Supply - @Power EP43057 (430W)
    HD Western Digital UATA WD800JB
    video card - MSI FX5600TD128
    512MB Elixir 400 MHz DDR Ram
    Lite-On DVDROM
    Pentium 4 2.6GHz HT 800MHz

    Quote
    My computer still keeps going to sleep and the only way to wake it up is to hit the reset button
    This is strange - my understanding is you would usually use the Power button to wake the suspended PC...
    Could what you are experiencing be more of a shutdown or instability?
    Is it due to BIOS setting or Windows? Here are some possibilities
    1. What is your selected Power Scheme? Are your options for Turn off hard disks, System standby & System hibernates set to Never?
    2. These BIOS settings work fine for me ...
    ACPI Standby State : Auto
    Power Management/APM : Enabled
    Suspend Time Out : Disabled
    Set Monitor Events
    FDC/LPT/COM Ports : Monitor
    Primary Master IDE : Monitor
    Primary Slave IDE : Ignore
    Secondary Master IDE : Ignore
    Secondary Slave IDE : Ignore
    Set WakeUp Events
    Resume on PME : Disabled
    Resume on RTC Alarm : Disabled
    Keyboard PowerOn Function : Disabled
    Mouse PowerOn Function : Disabled
    3. Does your keyboard have any of those quick buttons for Power / Sleep / Wake ? Could any of them be stuck? (Mine has these in a most inconvenient place - between Delete/End/PgDn and arrow keys, so I sometimes accidentally pressed them)

  • Turning off power saver temporarily.

    Is there a way to let the computer know I want to turn off power saver(dimming the screen then turning the display off) when watching DVDs? I seem to remember it was automatic with an older version of DVD player. Also is the solution applicable to VLC?

    Yes, but I have to do this every time I want to watch something with either of those programs. I'm sure the old version automatically overcame this problem. At the moment I have to keep moving the mouse or touching the keyboard every few minutes.

  • How to turn off beep sound in Java swing

    How to turn off beep sound in Swing.

    LookAndFeel.provideErrorFeedback(...);The Toolkit.beep() method is invoked from the above method. So you need to either instal a custom LAF that overrides that method or instal a custom Toolkit that doesn't beep.

  • How to turn off camera sound???

    Every time i start a vid or take a screenshot or photo it makes the shutter sound and ive put it on mute and everything HOW DO I TURN IT OFF???? I WANT TO TAKE PICS OF PEOPLE PLAYING GAMES IN CLASS BUT I CANT BECAUSE OF THE SOUND!!!!!!!

    In the US, it is possible to turn off the sound, but not just by using the mute switch (I know, I tried that and it did not work for me).
    Golfnhi's solution did work for me.
    I need to have the camera silent because I mostly use it to scan portions of books at the library for research.  Yes, that is allowed.  I checked with the librarian.  However, I do not want to bother other patrons of the library with the constant shutter sound.  It is simply too annoying.  So, I'm glad there is a solution out there.

  • How to turn off camera sound on Nokia E5

    I cannot turn off camera sound on Nokia E5-00. Who can help me?

    @navbond007
    Hi navbond007,
    Digital camera's do have a sounds when a picture is being taken but this noise isn't artificial like in mobile phones it is the shutter mechanism. Some digital camera's shutter makes a low or no noise but they do have a beep to give an indication that a picture is being taken. In countries where this is compulsory by law it should give some indication that a picture is being taken.
    Also please take into account one device is a phone and the other a dedicated camera.
    Regards
    Raoul_Duke
    If you find this post helpful, a click upon the white star at bottom would always be appreciated.
    If it also solves your problem, clicking ACCEPT AS SOLUTION below it will benefit other users!

  • How to turn off camera sound lenovo s6000

    how to turn off camera sound lenovo s6000?
    thank you

    well , you're right, but the law argues that a digital camera looks like a digital camera so it's easier to spot by the person being photographed. also, a digital camera has no other function but to take pictures, so one can't assume it's being used for any othe purpose. on the othe hand, a phone can't be identified as a camera right away. so it's easier to take pictures of unwilling subjects.
    Fear not those who argue but those who dodge

  • How can I turn off the sounds of the firefox? I don't want to turn off my whole computer sounds, but just the sounds which comes from the internet. Is there any master button?

    All the websites doesn't allow you to turn off the sounds, but that is just the thing I need to do. So how can I turn off the web browsers sounds? This is so small thing, that I refuse to believe that this kind of button doesn't exits.

    In Vista you can set the volume and mute setting for each application separately in the volume mixer.
    You can click the Volume icon on the Windows Taskbar near the clock and click the Mixer link at the bottom to open the mixer.<br />
    You can adjust the volume level for each application in that window.<br />
    You will only see the Firefox program in the Mixer if you are on a website that plays sound.

  • How do i turn off all sounds on iphone 5

    how do i turn off all sounds on iphone 5. I mean all sounds

    Turn your phone off.
    Also, read here:
    http://www.gottabemobile.com/2012/01/25/how-to-completely-silence-your-iphone/

  • While doing the most recent firmware upgrade, my iMac hung on the spinning ball. The instructions said "not" to turn off power during the process, so I don't know what to do. The ball is still spinning.

    While doing the most recent firmware upgrade, my new iMac hung on the spinning ball. The instructions said "not" to turn off power during the process, so I don't know what to do. The ball is still spinning.

    If you tried resetting the ipod and it still keeps having the same issue you described, try setting the ipod to disk mode.
    Here is an article from the apple support website on setting the ipod to disk mode.
    http://docs.info.apple.com/article.html?artnum=93651
    If you can get the ipod into disk mode, connect it to the computer and rrestore the ipod using itunes.
    if the ipod will not go into disk mode, you can return the ipod or set the ipod up for service via the apple ipod service depot.
    http://depot.info.apple.com/ipod

Maybe you are looking for