Tuxedo transaction branch in GMTREADY and cannot finishit without shutting down weblogic server

Trying to reproduce a problem in an application we are deployed a servlet in a
weblogic 8.1 sp2 server, doing the folowing:
1. Begin a transaction
2. Call a tuxedo service (tuxedo 6.5) via tuxedo gateway "A"
3. Call another tuxedo service (tuxedo 6.5) via tuxedo gateway "B"
4. Before commit the transaction in the servlet, we shutdown tuxedo gateway "B"
5. After commit transaction branch via gateway "A" remains indefinitely in GMTREADY
state, while transaction branch via gateway "B" gets GMTABRTONLY after timming
out.
After commit(that fail doing rollback), transaction is not reported like inflight
in weblogic server. We cannot finish transaction branch in GMTREADY state. Only
after shutdown weblogic server, and after an undetermined time(sometimes a lot)
transaction branch is rolled back.
While transaccion is not rolled back, all locks in DB remains active.
How we could finnish that branch without shutting down weblogic server, or, if
not, how we could control the time in witch transaction is rolled back?

We open a case with BEA eSupport and the servlet problem was a bug. Engineering
got a
temporary patch that seems to solve the problem. The case continues trying to
solve our original problem (the servlet was to reproduce the situation).
Thank you very much.
Jose Emilio Ortega.
"Todd Little" <[email protected]> wrote:
>
Hi Jose,
Can you provide a little more information. In particular, what are the
JTA timeout
values configured for your WLS application? Did you set the interoperate
setting
to Yes under the WTC local access point's connection settings? When
you begin
the transaction in the servlet, do you specify a timeout value and if
not, do
you know what your thread's default transaction timeout value is?
If possible, can you post or e-mail your WLS's config.xml and the domain
configuration
files for the two Tuxedo domains (not the UBB files, although those would
be helpful
as well.)
Thanks,
Todd
"Jose Emilio Ortega" <[email protected]> wrote:
Trying to reproduce a problem in an application we are deployed a servlet
in a
weblogic 8.1 sp2 server, doing the folowing:
1. Begin a transaction
2. Call a tuxedo service (tuxedo 6.5) via tuxedo gateway "A"
3. Call another tuxedo service (tuxedo 6.5) via tuxedo gateway "B"
4. Before commit the transaction in the servlet, we shutdown tuxedo
gateway "B"
5. After commit transaction branch via gateway "A" remains indefinitely
in GMTREADY
state, while transaction branch via gateway "B" gets GMTABRTONLY after
timming
out.
After commit(that fail doing rollback), transaction is not reportedlike
inflight
in weblogic server. We cannot finish transaction branch in GMTREADYstate.
Only
after shutdown weblogic server, and after an undetermined time(sometimes
a lot)
transaction branch is rolled back.
While transaccion is not rolled back, all locks in DB remains active.
How we could finnish that branch without shutting down weblogic server,
or, if
not, how we could control the time in witch transaction is rolled back?

Similar Messages

HT4623 please help - installed IOS7 and now I am having problems playing Words Free on my Iphone. It gives me a pop up telling me to connect to ITunes but will not connect. Cannot get out and have to continually shut down my phone and start over.

please help - installed IOS7 and now I am having problems playing Words Free on my Iphone. It gives me a pop up telling me to connect to ITunes but will not connect. Cannot get out and have to continually shut down my phone and start over.

Hi, jeantwin.
Thank you for visiting Apple Support Communities.
The steps in the article below may help you resolve the issue with push notifications.
iPad and iPod touch: Unable to use YouTube or Push notifications
http://support.apple.com/kb/ts3305
If the issue persists, try signing out of your Apple ID and then sign back in.
iOS: Changing the signed-in iTunes Store Apple ID account
http://support.apple.com/kb/HT1311
Cheers,
Jason H.

Hi, I cannot restart or shut down my MAC and get the message Geneio.it installer is cancelling your request. Please shut down and retry. However, I cannot seem to exit that application and I have no idea where it came from. Thanks

Hi, I cannot restart or shut down my MAC and get the message Geneio.it installer is cancelling your request. Please shut down and retry. However, I cannot seem to exit that application and I have no idea where it came from. Thanks
Could this be a virus?

Hold down the Power button until the computer shuts down.
The Safe Mac » Adware Removal Guide - Genieo
The Safe Mac » Adware Removal Guide
Helpful Links Regarding Malware Protection
An excellent link to read is Tom Reed's Mac Malware Guide.
Also, visit The XLab FAQs and read Detecting and avoiding malware and spyware.
See these Apple articles:
          Mac OS X Snow Leopard and malware detection
          OS X Lion- Protect your Mac from malware
          OS X Mountain Lion- Protect your Mac from malware
          About file quarantine in OS X
If you require anti-virus protection Thomas Reed recommends using Dr.Web Light from the App Store. It's free, and since it's from the App Store, it won't destabilize the system. If you prefer one of the better known commercial products, then Thomas recommends using Sophos.(Thank you to Thomas Reed for these recommendations.) If you already use Sophos, then be aware of this if you are using Mavericks: OS X Mavericks- Sophos Anti-Virus on-access scanner versions 8.0 - 9.1 may cause unexpected restarts
From user Joe Bailey comes this equally useful advice:
The facts are:
1. There is no anti-malware software that can detect 100% of the malware out there.
2. There is no anti-malware that can detect anything targeting the Mac because there
     is no Mac malware in the wild, and therefore, no "signatures" to detect.
3. The very best way to prevent the most attacks is for you as the user to be aware that
     the most successful malware attacks rely on very sophisticated social engineering
     techniques preying on human avarice, ****, and fear.
4. Internet popups saying the FBI, NSA, Microsoft, your ISP has detected malware on
    your computer is intended to entice you to install their malware thinking it is a
    protection against malware.
5. Some of the anti-malware products on the market are worse than the malware
    from which they purport to protect you.
6. Be cautious where you go on the internet.
7. Only download anything from sites you know are safe.
8. Avoid links you receive in email, always be suspicious even if you get something
    you think is from a friend, but you were not expecting.
9. If there is any question in your mind, then assume it is malware.

HT4061 just deactivated my iPhone 4s and replaced with 5s. The phone was wiped. I would like to activate it just to use it as an iPod. However I do not remember my iCloud username and password and cannot activate without it. How can I get past this?

Just deactivated my iPhone 4s and replaced with 5s. The phone was wiped. I would like to activate it just to use it as an iPod. However I do not remember my iCloud username and password (from several years ago) and cannot activate without it. How can I get past this?

Forgot iCloud username: http://iforgot.apple.com/appleid
Forgot iCloud password: http://iforgot.apple.com

Installed OS 10.9.5 and now screen is frozen. Cannot restart or shut down.

Installed Yosemite 10.9.5 and now screen is frozen. Cannot restart or shut down. Have done Repair Permissions but still not working.

Hold the power key for 10+ seconds.
Then see if you can boot into the recover partition to repair the disk or try a reinstall.
Ciao.

My update does'nt finish, and I can't shut down!

bought my n95 today, charged the battery for 10 hours, and then after talking to some friends decided to dowload the latest software.
Well, I did everything right. And suddenly my phone shut down, with fullcharged battery, and I just did as it said, and took out the battery, and pressed "retry",
and now the updating of the software has stopped. it's not updating!
I'm afraid to disconnect the cable, because the updates says that if I do do, my phone may stop working. And I can't shut down the update-window.. PLESE HELP ME SOMEONE? I just don't have time to bring my new phone in for service, so it HAS TO WORK! heeeeelp, PLEASE?
/Alexandra

Hi xcarmen
Unfortunately that is just the worst time to get "phone recovery" message and it is highly likely that you will now have to visit a Nokia Care Point to have the software re-installed. Once the USB connection has been broken, Nokia Software Updater fails to recognize the attached device.
I am not saying that it would have made the slightest difference here, but you are advised in FAQ to NSU to plug-in mains charger when updating phone software.
Happy to have helped forum in a small way with a Support Ratio = 37.0

I am not able to access the "Settings" on my iPad 3. I just get a gray screen for about 30 seconds and then the app shuts down. I am also unable to access the App store, iTunes, or any app requiring an internet connection. Any thoughts?

I am not able to access the "Settings" on my iPad 3. I just get a gray screen for about 30 seconds and then the app shuts down. I am also unable to access the App store, iTunes, or any app requiring an internet connection. Any thoughts?

First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."

I close Firefox session and then try to open a new browser window - get message that Firefox is still running and I need to shut down and restart. Need a solution

I close a Firefox browser and at a later time want to open a new browser window but get message "Firefox is still running and I need to shut down before I can open a new session" I do not want to shut down as this is laborious - I can go into task manager and processes and click on Firefox and end session that way but this is not the solution. Firefox seems to be running in background but I cannot open a new session window without doing on of the above.

Have a look at this post, see if it is of any help (though related to Vista, but same issue can be there with Window 7 also)
http://www.vistax64.com/browsers-mail/265937-firefox-exe-still-running.html

What does "Analyze audio for flex time editing" in Garage Band? It's taking so long(3 days)! and I can't shut down my pc.

What does "Analyze audio for flex time editing" in Garage Band? It's taking so long(3 days)! and I can't shut down my pc.

Did you ever figure out what was going on? i've got the same issue.
I record 2 hour choir practices then edit the talking out to make more useful accompaniments for personal practice. During my editing process my MacBk Pro (0r GarageBand) decides it needs to "Analyzing audio for Flex Time Editing". It will finish doing it and immediately start over again. I can not cancel it so I just have to force quit Garageband and lose eveeryrthing I have editied since my last Save. I've shut my mac totally off and rebooted and to no avail. Any suggestions?

I have an older macbook pro and the hard drive is starting to go (making loud noises). i tried to back up to an external hard drive (my passport essential se) using time machine and the computer keeps shutting down. suggestions to complete backup please?

I have an older macbook pro and the hard drive is starting to go (making loud noises). i tried to back up to an external hard drive (my passport essential se) using time machine and the computer keeps shutting down. the same thing happens when just trying to save my pictures from iphoto to a flash drive. suggestions to complete backup please?

Sounds like you'll need to access that drive while it is not booted. You need to replace it anyway, so do that, then one way or another (ext enclusure, et), access it and copy files.
If you keep trying to boot it, you might kill it for good and not get your files, so just swap it out first.

When I close out a website it goes to my desk top and then tells me firefox is running and I have to shut down the system

when I close out a website it goes to my desk top and then tells me firefox is already running and I have to shut down my system and bring it back up and wait to log back in. It's quite frustrating.

Try Ctrl>ALT>DEL then click Start Task Manager, then find the process firefox.exe, then click end program, then try opening Firefox again.  done! If that doesn't work, then try re-installing Firefox or going to this link to safe mode area and click continue to safe mode and then try and exit, if this problem still occurs then disable extensions and plugins

I am trying to use macro express and adobe acrobat 9 profession keeps shutting down, why is this happening? I tried to run as administrator already as well on both Macro Express and in Adobe and it still keeps shutting down.

I am trying to use macro express and adobe acrobat 9 profession keeps shutting down, why is this happening? I tried to run as administrator already as well on both Macro Express and in Adobe and it still keeps shutting down.

same problem, it's been happening to me for a week or two now i'm thinking about backing up my documents and just wiping it completely, see if that works. Has anyone else tried this? I'm loosing time and have already lost a good few hours of work as it just crashes randomly. need help!!!
- saving these threads on my favourites cause i'm about to crash . . .

I can't close safari (option is greyed out) and I can't shut down the computer because of it. How do I fix this?

I can't close safari (option is greyed out) and I can't shut down the computer because of it. How do I fix this?

Try to "Force Quit" Safari - either under the Apple menu or by holding down option-Command-esc.
Clinton

What is a memory alert and how do I shut down background apps?

What is a memory alert and how do I shut down background apps?

It's when the internal memory doesn't have enough space to operate apps or the phone. You should do two things.
1) Double-tap your Home button. You should see a row of apps at the bottom of the screen. Tap on one and hold down until it wiggles. Hit the red x in the upper right of the icon. Do this for all icons. Don't worry - you're not deleting the Apps, you're just shutting them down from multitasking
2) Do a hard reset of your iPhone. Hold down the Home button and Sleep button. Keep both held down until you see an Apple logo.
This should clear the memory.
Good luck!

I have Elements 10 and every time I go to open a file in the editor it shows its thinking and then it just shuts down the entire program. I have a big wedding I am working on and lots of other sessions. Please PLEASE help!!!!

I have Elements 10 and every time I go to open a file in the editor it shows its thinking and then it just shuts down the entire program. I have a big wedding I am working on and lots of other sessions. Please PLEASE help!!!!

And you are quite persistent, Menu Boy, in offering pernickety and pointless prattle, in response to a "support page" on iPad's buggy Pages App.
Let's summarise, for those reviewing this threadless thread for app support..
Mobile pages works reliably for simple docs, especially creating letters and Menus for Microsoft's Kindy canteen (even on special days with nice big pictures).
When importing more complex docs and/or working with larger creations, it is prone to randomly corrupting files upon re-opening, along similar lines as Word (running on a PC).
So, Menu Boy, do they let you sneak into classes every now and then? What is the secret to their training? "Say after me, if any I.T. product works just some of the time, that's a job well done, and if something randomly stops working, we call that the user's fault... And if they complain, we call them names."

Tuxedo transaction branch in GMTREADY and cannot finishit without shutting down weblogic server

Similar Messages

Maybe you are looking for