Two Managed servers in the same apahce.

Hi,
I did not have too much experience with WLS, I have two manged servers which listened on diff port, and I tried to configure them in one apache instance..
do u know how to do it? I have tried this:
<Location /weblogic>
SetHandler weblogic-handler
PathTrim /weblogic
</Location>
<IfModule mod_weblogic.c>
MatchExpression app1 WebLogicHost=192.1.1.87|WebLogicPort=7100|Debug=ON
MatchExpression app2 WebLogicHost=192.1.1.87|WebLogicPort=7200|Debug=ON
</IfModule>
And got the following error:
[Mon Jun 23 15:43:41 2003] [error] CONFIG_ERROR [line 1309 of ap_proxy.cpp]: Neither 'WebLogicCluster' nor 'WebLogicHost' specified in parameters
My WLS: 7 sp2 and apache is 2.0.45.
Appreciate your advice...
Regards
Leo

You can have more number of soa servers in a SOA domain. You can create mutiple managed servers using config wizard. But when you create more than one soa servers, then all the servers should exist in the same cluster.
You can not have the soa servers outside the soa cluster.

Similar Messages

  • Two R3 servers have the same logical system name?

    Can two R3 servers have the same logical system name present in the same network? We plan to clone our production server and let the clone reside in the same network. The clone is identical with the production server with the same SID, hostname, logical system name, but different IP address.

    Hi
    Check this  [Link|http://help.sap.com/saphelp_nw70/helpdata/EN/da/5990df015b5b43a36f6ce7fa1ee8c0/content.htm]will cleare you doubt
    Regards
    Uday

  • Two CAS Servers on the same domain but different AD Sites

    I have a customer that has 1 EXCH MB server & 1 EXCH server running the Hub Transport and Client Access roles. These two servers are in the same domain and reside in AD site A. Now he wants AD Site B (also in the same domain) to have 1 EXCH MB server
    & 1 EXCH server running the HUB/CAS role. The problem is the CAS role in site A is the only one that is public interfacing. The CAS server in site B has not certificates at all, and I want all the mail to re-route to the CAS server in Site A. Does anyone
    know how I can do that???

    The CAS in the internet facing site will proxy to the CAS in the non-internet facing site. And you do have a cert on that CAS in Site B. The default built-in one. However, if you have clients in Site B, you should replace that built-in cert with one that
    is trusted by clients such as Outlook and Lync etc...It doesnt have to be a 3rd party cert, it could be on that is trusted internally.
    http://technet.microsoft.com/en-us/library/bb310763(v=exchg.141).aspx
    Understanding Proxying and Redirection
    Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

  • How to create reports servers with the same name in two nodes in Reports

    Greetings
    We are migrating Oracle Application Server 10g (9.0.4) to a better hardware infrastructure with high availability. We want to provide 2 new Oracle Application Server 10g (9.0.4) in High availability and we want to avoid modify the existing forms and reports code, but the code is looking for a specific reports server name when calling reports, but I couldn't create the same reports server name in the both oas machines, I could create the reports server in only one node. I want to create a reports server with the same name in both nodes but it is not possible. I know that there is a procedure to do that in 10.1,2 (Note 437228.1, How to Create Two Reports Servers With the Same Name in the Same Subnet) but I couldn't find the equivalent procedure in 9.0.4.
    Anybody kwows how to create a reports server with the same name in two nodes using 10g (9.0.4)
    Thanks
    Ramiro Ortiz.

    Hello.
    I applied the patch 4092150 on my oas 9.0.4.2 and I modified my rwnetwork.conf file changing the port to 14022 by following the note "How to Create Two Reports Servers With the Same Name in the Same Subnet? [ID 437228.1]" but I am facing the same error rep-56040 "server already exists in the network".
    When I run osfind command I get the following information (My reports server is senarep and I want to create it on SNMMBOGOAS10):
    osfind: Found 2 agents at port 14000
    HOST: SNMVBOGOAS10.sena.red
    HOST: SNMVBOGOAS09.sena.red
    osfind: There are no OADs running on in your domain.
    osfind: There are no Object Implementations registered with OADs.
    osfind: Following are the list of Implementations started manually.
    HOST: SNMVBOGOAS10.sena.red
    REPOSITORY ID: IDL:oracle/reports/server/EngineComm:1.0
    OBJECT NAME: senarep2
    REPOSITORY ID: IDL:oracle/reports/server/ServerClass:1.0
    OBJECT NAME: senarep2
    HOST: SNMVBOGOAS09.sena.red
    REPOSITORY ID: IDL:oracle/reports/server/EngineComm:1.0
    OBJECT NAME: senarep
    REPOSITORY ID: IDL:oracle/reports/server/ServerClass:1.0
    OBJECT NAME: senarep
    Any Ideas?

  • Bridge already registered when using two managed servers

    I have defined a messaging bridge with a target of my cluster in Weblogic 9.0 (upgraded from 7.0). My cluster has two managed servers. The bridge and resource adapter also have targets of the cluster. When I start the first managed server, everything works fine. The bridge works. When I bring up the second managed server, I repeatedly get the following:
              javax.jms.JMSException: SJMSBridge is already registered
              Is there something new that I need to define in the config to make this work?

    Here is the full error. I can understand what you are saying about the cluster, but I get this message even when only one server of the cluster is running. That doesn't make sense to me.
              ####<Nov 15, 2005 2:30:36 PM PST> <Info> <MessagingBridge> <PFRIMER> <ManagedServer2> <[ACTIVE] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1132093836274> <BEA-200030> <Bridge "SJMSBridge" is configured to work in "Exactly-once" mode, and it is actually working in "Duplicate-okay" mode.>
              ####<Nov 15, 2005 2:30:36 PM PST> <Info> <MessagingBridge> <PFRIMER> <ManagedServer2> <[ACTIVE] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1132093836805> <BEA-200028> <The bridge "SJMSBridge" has started transferring messages.>
              ####<Nov 15, 2005 2:30:38 PM PST> <Warning> <MessagingBridge> <PFRIMER> <ManagedServer2> <[ACTIVE] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1132093838008> <BEA-200026> <Bridge "SJMSBridge" encountered some problems in one of its adapters or underlying systems. It stopped transferring messages and will try to reconnect to the adapters shortly. (The exception caught was java.lang.Exception: javax.resource.ResourceException: Error setting message listener
                   at weblogic.jms.adapter.JMSBaseConnection.throwResourceException(JMSBaseConnection.java:1457)
                   at weblogic.jms.adapter.JMSBaseConnection.throwResourceException(JMSBaseConnection.java:1437)
                   at weblogic.jms.adapter.JMSBaseConnection.setMessageListener(JMSBaseConnection.java:1201)
                   at weblogic.jms.adapter.JMSConnectionHandle.setMessageListener(JMSConnectionHandle.java:134)
                   at weblogic.jms.bridge.internal.MessagingBridge.beginForwarding(MessagingBridge.java:951)
                   at weblogic.jms.bridge.internal.MessagingBridge.run(MessagingBridge.java:1038)
                   at weblogic.work.ServerWorkManagerImpl$WorkAdapterImpl.run(ServerWorkManagerImpl.java:518)
                   at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
                   at weblogic.work.ExecuteThread.run(ExecuteThread.java:179)
              -------------- Linked Exception ------------
              javax.resource.ResourceException: Error creating asynchronous consumer
                   at weblogic.jms.adapter.JMSBaseConnection.throwResourceException(JMSBaseConnection.java:1457)
                   at weblogic.jms.adapter.JMSBaseConnection.throwResourceException(JMSBaseConnection.java:1437)
                   at weblogic.jms.adapter.JMSBaseConnection.createConsumer(JMSBaseConnection.java:1299)
                   at weblogic.jms.adapter.JMSBaseConnection.access$400(JMSBaseConnection.java:84)
                   at weblogic.jms.adapter.JMSBaseConnection$11.run(JMSBaseConnection.java:1183)
                   at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
                   at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
                   at weblogic.jms.adapter.JMSBaseConnection.setMessageListener(JMSBaseConnection.java:1180)
                   at weblogic.jms.adapter.JMSConnectionHandle.setMessageListener(JMSConnectionHandle.java:134)
                   at weblogic.jms.bridge.internal.MessagingBridge.beginForwarding(MessagingBridge.java:951)
                   at weblogic.jms.bridge.internal.MessagingBridge.run(MessagingBridge.java:1038)
                   at weblogic.work.ServerWorkManagerImpl$WorkAdapterImpl.run(ServerWorkManagerImpl.java:518)
                   at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
                   at weblogic.work.ExecuteThread.run(ExecuteThread.java:179)
              -------------- Linked Exception 2 ------------
              javax.jms.JMSException: SJMSBridge is already registered
                   at org.exolab.jms.messagemgr.ConsumerManager.createDurableConsumerEndpoint(ConsumerManager.java:404)
                   at org.exolab.jms.server.JmsServerSession.createSubscriber(JmsServerSession.java:771)
                   at org.exolab.jms.server.mipc.IpcJmsSessionConnection.createSubscriber(IpcJmsSessionConnection.java:588)
                   at org.exolab.jms.server.mipc.IpcJmsSessionConnection.notify(IpcJmsSessionConnection.java:165)
                   at org.exolab.jms.server.mipc.IpcJmsReceiver.notify(IpcJmsReceiver.java:100)
                   at org.exolab.jms.server.mipc.IpcServerChannel.run(IpcServerChannel.java:161)
              .)>

  • Singletons running on two servers at the same time

    Hello,
              we faced one interesting situation with our application, running on clustered BEA Weblogic 9.2. We implemented some Singletons (ie. Singleton Service in a Weblogic cluster) and they are running fine. Most of the time.
              Common scenarios: cluster is started -> the singletons run on one server; the server is brought down -> the singletons are started on the second server.
              However, we had recently two situations where the Singletons started on both servers! Here they are:
              1) We use Database Migration Basis and we have a dedicated table for Weblogic to capture current state of the singletons. Due to the fact that database (Oracle RAC) was partially available one of the Managed Server could not get the lease and probably assumed that no singleton is running, therefore started the singletons locally.
              2) Network outage: we had several minutes where none of our servers could communicate between them (neither between SASU MS nor with the database). Consequence: each MS decided to start the singleton locally (after some time, which I assume is the waiting time). Once the network came back the servers could communicate again but the duplicate singletons are not deactivate, so they are running in parallel.
              Anyone experienced the same or similar issues? How to prevent the above? Is the Consensus Migration Basis a better choice? (I think yes for #1 but not for situation #2).
              Any helpful answer is appreciated.
              Thank you, best regards,
              Remus.

    In general its not a good idea.  Running PSConfig will try to establish a lock on the configuration database.  Doing that from two servers at the same time may cause the update to fail.
    Paul Stork SharePoint Server MVP
    Principal Architect: Blue Chip Consulting Group
    Blog: http://dontpapanic.com/blog
    Twitter: Follow @pstork
    Please remember to mark your question as "answered" if this solves your problem.

  • Multiple Node Manager Instances and servers sharing the same domain home.

    Hi,
    We have a 8 man server weblogic cluster spread over 4 machines. Each machine runs 2 man servers each.
    Each of the machine is configured to run node manager.
    We use shared storage accessible to all 8 servers and all 8 man servers have the same domain_home.
    Lets call it W:/domain
    Now the problem we are facing is that node manager running on 1 machine is trying to access/control a managed server on a different machine after a machine restart.
    eg.
    ManServer1 Home : W:/domain/servers/server1 ====> runs on Machine 1
    ManServer2Home : W:/domain/servers/server2 ====> runs on Machine 2
    Problem is node manager on machine 1 is trying to restart man server 2. The path W:/domain/servers/server2 is accessible to Machine 1.
    After a restart, what I assume is happening is that the nodemanager is checking all servers folder under Domain_Home/Servers and trying to restart servers instead of restarting only those which it should start. The config file has the server and machine assignment done correctly. Is there a way to make this configuration towork. Or do we need to create different domain_home's for different man servers like
    Domain_Home for MS1: W:/domain/MS1 ( Server Home would be : W:/domain/MS1/servers/MS1)
    Domain_Home for MS2: W:/domain/MS2 ( Server Home would be : W:/domain/MS2/servers/MS2)
    Regards,
    Atheek
    Edited by: atheek1 on 03-May-2010 00:27

    Thanks - We have tried putting 2 dad entries in file, but not sure how you connect. You only specify a port number, so how does it connect that to a db???

  • How manage two numbers files in the same screen to compare data

    Hello,
    I have two - 2 numbers files that I want to compare data between them in the same screen, How can I do that? Like in Excel you can compare two differente files in the same screen with the option windows cascade or something like that.
    Please Help Me.....

    First, turn off the abomination that is called "Full Screen" -- ported from the iPhone, land of tiny screens and single tasks.
    Then resize the first window to take up half the screen and place it on the left. Open the second spreadsheet and resize its window and place it on the right.
    Compare.

  • Linking JMS Queues between two managed servers

    I have an environment setup with an AdminServer and multiple managed servers all under the same domain and on the same cluster. They are all running under the same Instance of weblogic on one Windows Server.
              I have two different applications on two managed servers that need to have a JMS Queue be linked between them. Essentially have Server1's 'inbox' link to Server2's 'outbox' and Server2's 'inbox' link to Server2's 'outbox'. Each has their own name for their inbox or outbox.
              Server1(inbox)=Server2(outbox)
              Server2(inbox)=Server1(outbox)
              I've tried using Foreign JNDI Providers, however it doesn't allow me to input two addresses (Server1 and Server2).
              Is there another function that would do the same thing?
              Thanks!

    You can make use of Message Bridges between any 3th party JMS provider or SAF (store & forward) if both jms servers are weblogic servers.
              Schelstraete Bart
              [email protected]
              http://www.schelstraete.org
              http://www.linkedin.com/in/bschelst
              Edited by bschelst at 04/07/2008 1:27 PM

  • Two Managed Servers non-clustered problem

    I have two managed servers each exactly the same just listening on different
              port in the same domain. When I start the second server I get a "Child
              exited " message reported in the first server's logs. This does not seem to
              affect the running of the server. Does anyone know why this happens. Note
              that both servers define the same jndi name for a stateless session bean.
              Could this be a problem>
              

    Solaris 8. There is no information in any log relating to the message "Child
              Exited". Note that sometimes the message appears twice.
              "Kumar Allamraju" <[email protected]> wrote in message
              news:[email protected]..
              > what OS is this on?
              > This message may not be coming from WLS?
              > Can you post the error message or stacktrace?
              >
              > --
              > Kumar
              >
              > Paul
              >
              > > I have two managed servers each exactly the same just listening on
              different
              > > port in the same domain. When I start the second server I get a "Child
              > > exited " message reported in the first server's logs. This does not seem
              to
              > > affect the running of the server. Does anyone know why this happens.
              Note
              > > that both servers define the same jndi name for a stateless session
              bean.
              > > Could this be a problem>
              > >
              > >
              >
              

  • Is it possible that Exchange UM could be configure with two call managers over the same sip?

    Hi,
    I have Cisco call manager 8.2 integrated with Microsoft Exchange Server 2010 Unified Messaging.
    Call manager has primary and secondary server. I created a sip trunk and linked primary CUCM with Exchange. Users can leave and get voice mails.
    Problem: In case that primary server is down (WAN is down) the users registered on secondary server but they cannot contact to Exchange Unified Messaging.
    I added  new UM Dial Plan with the same pilot and associated it to the secondary CUCM server. UM answered but do not recognize the extension number "is not a valid mailbox extension".
    Is it possible that Exchange UM could be configure with two call managers over the same sip, the same pilot number, different associated UM servers and get access to the same voice mail boxes?
    If not:
    Does exist a way to configure Exchange UM that will work if one CUCM server is down?
    Thank you,
    Peter

    Hi,
    I have Cisco call manager 8.2 integrated with Microsoft Exchange Server 2010 Unified Messaging.
    Call manager has primary and secondary server. I created a sip trunk and linked primary CUCM with Exchange. Users can leave and get voice mails.
    Problem: In case that primary server is down (WAN is down) the users registered on secondary server but they cannot contact to Exchange Unified Messaging.
    I added  new UM Dial Plan with the same pilot and associated it to the secondary CUCM server. UM answered but do not recognize the extension number "is not a valid mailbox extension".
    Is it possible that Exchange UM could be configure with two call managers over the same sip, the same pilot number, different associated UM servers and get access to the same voice mail boxes?
    If not:
    Does exist a way to configure Exchange UM that will work if one CUCM server is down?
    Thank you,
    Peter

  • Two runtime engienes on the same machines?

    Just wonder if anybody know if it's ok to install two owb runtime servers on the same unix box (of course different homes)
    TIA

    If you wonder if it is possible to install multiple Runtime Repositories on one single server the answer is yes. I'm currently developing on a server where we have 12 different projects. Each project has multiple runtime repos to deploy the tables and process data for different stages of a DWH.
    How to manage the server exactly I really do not know... Sorry...!
    Regards,
    Moscowic

  • Two Domain Controllers with the Same Name

    So I was working on setting up our new branch office DC. Anyway, the server failed to join the domain the first time because it upgraded the AD schema (This was our first 2012 R2 server) and the schema wasn't synced to all the other remote offices. So I
    forced a sync, joined the server as a workstation, then made it a domain controller.
    Anyway, after that the server would show itself as a DC in Active Directory, but all the other servers believed it was just a workstation. So, I removed Active Directory from the server (I had to force the removal). I reset the computer account on the local
    DCs, then rejoined it to the domain and made it a domain controller again. This time, it appeared as a Domain Controller on the other DCs in the domain.
    Now for the issue --- I've now got two objects for the server under AD Sites and Services. One of them doesn't appear to have any AD DS connections. The other has connections, but not all of them work correctly (I get errors when I tell certain connections
    to sync).
    What should I do to fix this?
    I'm still in the setup phase of this, so I can do anything I want with this particular server. I was thinking I would demote from a Domain Controller, remove it from the domain. Then use ntdsutil to cleanup any other metadata that is hanging around in AD (Something
    like: https://support.microsoft.com/KB/216498?wa=wsignin1.0 )
    Does anyone else have suggestions on what I should do to fix this? --- I'm being overly cautious here as I do not want to mess anything up in Active Directory.
    Thanks!
     

    I have not done a metadata cleanup.... I was asking if I should.
    The connections on the valid server appeared to be working before I deleted them (Maybe it took a while to replicate ? )
    So I went through and deleted all the AD Sites and Services connections from both servers (The broken server had 5 connections to the same DC in another site). Anyway, I ran repadmin /kcc and it regenerated a connection to a server in the remote site, but
    it also generated a connection between the two servers with the same name. I ran dcdiag after I did the repadmin /kcc. Anyway it shows:
    Directory Server Diagnosis
    Performing initial setup:
    Trying to find home server...
    Home Server = DC-01-CLE
    * Identified AD Forest.
    Done gathering initial info.
    Doing initial required tests
    Testing server: Cleveland\DC-01-CLE
    Starting test: Connectivity
    ......................... DC-01-CLE passed test Connectivity
    Testing server:
    Cleveland\DC-01-CLE\0ACNF:203cf49f-8cb3-4915-b122-be31ddd6e10e
    Starting test: Connectivity
    [DC-01-CLE\0ACNF:203cf49f-8cb3-4915-b122-be31ddd6e10e]
    DsBindWithSpnEx() failed with error 5,
    Access is denied..
    Got error while checking LDAP and RPC connectivity. Please check your
    firewall settings.
    DC-01-CLE\0ACNF:203cf49f-8cb3-4915-b122-be31ddd6e10e failed test
    Connectivity
    Doing primary tests
    Testing server: Cleveland\DC-01-CLE
    Starting test: Advertising
    ......................... DC-01-CLE passed test Advertising
    Starting test: FrsEvent
    ......................... DC-01-CLE passed test FrsEvent
    Starting test: DFSREvent
    ......................... DC-01-CLE passed test DFSREvent
    Starting test: SysVolCheck
    ......................... DC-01-CLE passed test SysVolCheck
    Starting test: KccEvent
    A warning event occurred. EventID: 0x80000785
    Time Generated: 12/15/2014 09:58:02
    Event String:
    The attempt to establish a replication link for the following writable directory partition failed.
    A warning event occurred. EventID: 0x80000785
    Time Generated: 12/15/2014 09:58:02
    Event String:
    The attempt to establish a replication link for the following writable directory partition failed.
    A warning event occurred. EventID: 0x80000785
    Time Generated: 12/15/2014 09:58:02
    Event String:
    The attempt to establish a replication link for the following writable directory partition failed.
    A warning event occurred. EventID: 0x80000785
    Time Generated: 12/15/2014 09:58:11
    Event String:
    The attempt to establish a replication link for the following writable directory partition failed.
    A warning event occurred. EventID: 0x80000785
    Time Generated: 12/15/2014 09:58:11
    Event String:
    The attempt to establish a replication link for the following writable directory partition failed.
    A warning event occurred. EventID: 0x80000785
    Time Generated: 12/15/2014 09:58:11
    Event String:
    The attempt to establish a replication link for the following writable directory partition failed.
    A warning event occurred. EventID: 0x80000785
    Time Generated: 12/15/2014 10:03:37
    Event String:
    The attempt to establish a replication link for the following writable directory partition failed.
    A warning event occurred. EventID: 0x80000785
    Time Generated: 12/15/2014 10:03:37
    Event String:
    The attempt to establish a replication link for the following writable directory partition failed.
    A warning event occurred. EventID: 0x80000785
    Time Generated: 12/15/2014 10:03:37
    Event String:
    The attempt to establish a replication link for the following writable directory partition failed.
    ......................... DC-01-CLE passed test KccEvent
    Starting test: KnowsOfRoleHolders
    ......................... DC-01-CLE passed test KnowsOfRoleHolders
    Starting test: MachineAccount
    ......................... DC-01-CLE passed test MachineAccount
    Starting test: NCSecDesc
    ......................... DC-01-CLE passed test NCSecDesc
    Starting test: NetLogons
    ......................... DC-01-CLE passed test NetLogons
    Starting test: ObjectsReplicated
    ......................... DC-01-CLE passed test ObjectsReplicated
    Starting test: Replications
    ......................... DC-01-CLE passed test Replications
    Starting test: RidManager
    ......................... DC-01-CLE passed test RidManager
    Starting test: Services
    ......................... DC-01-CLE passed test Services
    Starting test: SystemLog
    A warning event occurred. EventID: 0x00001795
    Time Generated: 12/15/2014 10:03:37
    Event String:
    The program lsass.exe, with the assigned process ID 600, could not authenticate locally by using the target name LDAP/a23a13d0-8434-4344-bd6b-24fdf5576329._msdcs.mydomain.local. The target name used is not valid. A target name should refer to one of the local computer names, for example, the DNS host name.
    ......................... DC-01-CLE passed test SystemLog
    Starting test: VerifyReferences
    ......................... DC-01-CLE passed test VerifyReferences
    Testing server:
    Cleveland\DC-01-CLE\0ACNF:203cf49f-8cb3-4915-b122-be31ddd6e10e
    Skipping all tests, because server
    DC-01-CLE\0ACNF:203cf49f-8cb3-4915-b122-be31ddd6e10e is not responding to
    directory service requests.
    Running partition tests on : DomainDnsZones
    Starting test: CheckSDRefDom
    ......................... DomainDnsZones passed test CheckSDRefDom
    Starting test: CrossRefValidation
    ......................... DomainDnsZones passed test
    CrossRefValidation
    Running partition tests on : ForestDnsZones
    Starting test: CheckSDRefDom
    ......................... ForestDnsZones passed test CheckSDRefDom
    Starting test: CrossRefValidation
    ......................... ForestDnsZones passed test
    CrossRefValidation
    Running partition tests on : Schema
    Starting test: CheckSDRefDom
    ......................... Schema passed test CheckSDRefDom
    Starting test: CrossRefValidation
    ......................... Schema passed test CrossRefValidation
    Running partition tests on : Configuration
    Starting test: CheckSDRefDom
    ......................... Configuration passed test CheckSDRefDom
    Starting test: CrossRefValidation
    ......................... Configuration passed test CrossRefValidation
    Running partition tests on : mydomain
    Starting test: CheckSDRefDom
    ......................... mydomain passed test CheckSDRefDom
    Starting test: CrossRefValidation
    ......................... mydomain passed test CrossRefValidation
    Running enterprise tests on : mydomain.local
    Starting test: LocatorCheck
    ......................... mydomain.local passed test LocatorCheck
    Starting test: Intersite
    Doing intersite inbound replication test on site Cleveland:
    ......................... mydomain.local passed test Intersite
    I've attached a screenshot of AD Sites and Services. Please note I've erased some info for privacy reasons (The site the other DC is in has been erase as well as part of its name).
    Picture of AD Sites and Services

  • How do I sync two ipods with two different IDs on the same computer?

    How do I sync two ipods with two different IDs on the same computer?

    Simply connect them.  One computer with one iTunes can manage multiple devices.  They're tracked by S/N but you might wish to assign them unique names so that you can track them yourself.
    The only minor issue is app updating and purchases while on the computer.  It's necessary to log out and back in to the "correct" ID.  Much easier to do these things from the iPods.

  • Using the same photos and music between two user accounts in the same Mac

    Hi,
    I think this question might have already been asked in the forum.
    1. I have one MacBook Pro and two user accounts (One for me and one for my wife)
    2. We are having two seperate iPhones with seperate AppleIDs
    3. We want to maintain the apps / calendar / mail / reminders / contacts as seperate - Through iCloud (Seperate Apple ID approach) - All this is fine
    4. All we want to have it shared is the Music files and the Photo library without duplicating
    I have tried the shared folder approach for the music and having the iTunes point to that directory for the libary location in the preferences but unfortunately if she adds a folder to the library mine does not get updated unless I do a add folder to library and vice versa.
    Whats the best way to deal with the Photos / Music sharing between two user accounts on the same mac
    Thanks
    Shas

    To give other users read-only access to your iTunes library, use the Sharing features of iTunes. Sharing works over the local network as well as on the same computer. See the built-in help for details.
    To give others selective access to your iPhoto library, you have the option of using iCloud Photo Sharing, if the privacy implications don't bother you. The images will be stored temporarily on Apple servers.
    If you want to give full read/write access to more than one user, see the support articles linked below.
    iTunes: How to share music between different accounts on a single computer
    iPhoto: Sharing libraries among multiple users
    There is a way to share the library without moving it to a secondary volume. If you really need to do that, ask for instructions.

Maybe you are looking for

  • SQL Server 2012 Express: Password emergency

    I am trying to reset sa password on SQL 2012 Express as it described on http://technet.microsoft.com/en-us/magazine/jj853293.aspx When I execute SQLSMD command it fails with following message. Msg 15247, Level 16, State 1, Line 1 User does not have p

  • Photoshop and Powerful Machines

    Some eons ago, I was a PS user and found my then-current machine had features which PS was not using. Cannot remember the fine detail, we are talking PS5 or 6... So, now I am contemplating buying a new i7 based machine with umpteen GB of memory and s

  • Need to post blocked stock for sales order stock

    HI Expert,                 i have one issue pls solve it as soon as possible when ever i received part return from customer ( RE) ,  it automatically going to unrestricted stock , i need its going to returns stock  Note : this is make to order type u

  • Lenovo K450 Desktop Wi-Fi toggle?

    Hello, I recently bought a K450 desktop. How do I toggle Wi-Fi connectivity? I don't see any setting that allows me to turn off Wi-Fi.  Thanks.

  • Query Cache in WLP 10.3

    Hi, Has anyone used query cache in WLP applications without using any ORM tool ? What all options do I have to get my frequently used queries to be cached? Thanks, CA