Types of error codes in CX_AI_SYSTEM_FAULT

Hi, all
In the help.sap.com, "Error Handling"
http://help.sap.com/saphelp_nw2004s/helpdata/en/25/a45c3cff8ca92be10000000a114084/frameset.htm
it says like the following.
Handling System Errors
You catch errors that occur when transferring a message by using the
exception class CX_AI_SYSTEM_FAULT. You distinguish system errors using
error codes; these are managed and documented centrally for all systems.
The application can display an error message by using the attributes
CODE and ERRORTEXT of the exception class.
If so, what kind of errors might be? Where can i get the list of CODE
and ERRORTEXT?
i tried to read doc on CX_AI_SYSTEM_FAULT from SE24 but there was no
doc available for this class.
Best Regards.

HI,
Following thread may help you to debug the erros , if it occurs.
Problem in executing ABAP Proxy
Systems error- restart not possible
ERR: HTTP_RESP_STATUS_CODE_NOT_OK - 401 Unauthorized
This may help you to , how this error occured in different scenarios..
Thanks,
Moorthy

Similar Messages

Unable to run Crystal Report due to error code called "database code:102

I have created a View on the SQL server and Now I am trying to run crystal report using that view. However, I get Database Vendor Code error message 102. Need your help, How can I ran a report using SQL veiws in Crystal?
thanks!
Mansoor

Hi,
The report is getting an error code 102 from the database driver.Try with searching the RDBMs type for error code 102, to narrow down the issue.
If data from database is failed to retrieve then,there are several causes of this error like disconnected tables, tables that are not connected properly.
Run your query in SQLcon32 and check that getting accurate output or not.
Regards,
Shweta

I cannot access iTunes Store due to an error code 0x80090318. Please help!

I cannot connect to iTunes Store. I tried re downloading, it's OS windows 8.1
Please help!

Type that Error code into the Search window... Top right

CS6 - Blu-ray Error: "Fatal Error", Code: "6"

Greetings,
I have gone through about 15 Blu Ray Disks in the past week, trying to burn one wedding project.
When i burn to DVD - its fine... but when i choose Blu Ray, it gets about 1 hour in and then comes up with 'Blu-ray Error: "Fatal Error", Code: "6".
I have tried to re-export all files for burning, in two different blu ray formats - but it continues to come up with the same.
I have used Encore for years but have just upgraded to CS6 and im getting these errors.
What am i doing to cause this?
Thx,
James

Try this first:
Strange Errors in En? Project Changes Not Showing Up? Try This!
Then type "fatal error code 6" into the "Ask A Question" box at the top of the main Encore Forums page, or the top of the Discussions page.
You'll get 5 very relevant topics right away.
Jeff

Error message FF762 " Condition type MWVS tax code A8 does not extist- MIRO

Dear all,
after support packagesi mplemented , I've the problem with transaction MIRO,
because I cannot released the invoic for the folloqiong error:
FF762 " Condition type MWVS tax code A8 does not extist.
Please, could you help me.
Thanks in advance for your cooperation
Gaetano

Hi,
Go to FTXP and give the tax code A8.
In the resultant screen, select the condition type MWVS, and link the condition type to an account key.
Make sure all the other tax determination settings are fine
Now, try the transaction it should work fine.
Hope this helps you

Creative Cloud Installation Failed Download Error - Error Type -7 and Error Code - 401

I subscribed to Creative Cloud in December 2012 and have been trying to install the applications, but the "Installation Failed" through the Adobe Application Manager. (see screenshot)
Here is a line from my log file:
01/08/13 11:08:48:346 | [WARN] | | ASU | PDApp | DownloadError | | | 6120 | Download Error has come with GDE Error type - -7 and error code - 401
I tried searching for the same error code in the "knowledge base" but couldn't locate any.
I am on a Windows 7 (x64) machine. I also have CS5.5 installed.
Anyone have this problem? Please help or point me in the right direction if you can. Thanks!

Thanks Romsinha,
   I tried the above steps, with no luck. I have admin rights on both laptop and desktop I'm trying to install to. I have updated my AAM on both machines with no issue (when using the direct link above). But when I click the 'Try' link to download an application, it shows the scrolling status bar for a few seconds, then "Installation Failed" 'Download error. Press Retry to try again or contact customer support. (-7)'   Retry only produces same results.
Both machines are running Win 7 Pro - SP1 64bit
     (laptop - 16 GB RAM & Core i7-2760QM 2.40 GHz processor)
     (desktop - 8 GB RAM & Xeon W3520 2.67GHz processor)
I am running in a corporate setting with I'm sure all sorts of Firewall protection etc...
I'm planning on asking for a CC membership, but wanted to check out the new features first....
Thanks!

I shoot with a Canon 7D, have Windows 7 installed on my computer, Adobe CS4 (Bridge & Photoshop). I'm trying to open the CR2 files in Bridge to adjust them before I open them up in Photoshop, but it's giving me an error code saying it's the wrong file typ

I shoot with a Canon 7D, have Windows 7 installed on my computer, Adobe CS4 (Bridge & Photoshop). I'm trying to open the CR2 files in Bridge to adjust them before I open them up in Photoshop, but it's giving me an error code saying it's the wrong file type. I downloaded the latest updates for Adobe Raw as well as the DNG converter, however I don't want to have to convert to DNG before opening in Bridge. Please let me know what I can do to open the CR2 files directly in Bridge CS4, thank you!

Make sure you have the right version...
Camera Raw plug-in | Supported cameras
Camera Raw-compatible Adobe applications

When i run a sequence with ivi step types in simulation mode i get the error code number BFFA0015 - Types do not match.

When i run the sequence with ivi step types in simulation mode i get the error Types do not mathc. The step that generates this error is an IviScope step type and is configured as a measurement. Th weird thing is that in real mode is working perfectly. I have three measure steps and i get the error in all of them. The exact error message is:
UUT Result: Error, Error executing substep 'Post'. An exception occurred calling 'RunStep' in 'ISubstep' of 'TestStand Ivi Step Types 1.0 Type Library' An error occurred while executing the step. Component Works IVI Control Error: The IVI Read operation failed on channel '1' for logical name 'SampleScope'. Details: (1
) Types do not match. [IVI Error Code: BFFA0015] Source: TSIviStepTypes [Error Code: -30721, User-defined error code.]
Can someone tell me how to fix this problem?. It seems to me that the simulation generates a diferent type of measurement of that generated in real mode.

Update:
The simulation driver appears to be raising the error. By switching to specific driver simulation the error does not occur. This may be a problem in either the class simulation driver or the specific driver.
Scott Richardson
National Instruments

Exception --- Value can not be converted to requested type.Error Code: 0

Inside my query, I try to use function,like
Expression formattedRegDateCol = regDateCol.getFunction("to_char", "YYYY/MM/DD");
sometimes query works fine and sometimes got following exception, can anyone here help me out..
Internal Exception: java.sql.SQLException: [BEA][Oracle JDBC Driver]Value can not be converted to requested type.Error Code: 0
Call:SELECT COUNT(*), to_char(REG_DATE, 'YYYY/MM/DD') FROM SYSTEM_DETAIL WHERE ((REG_DATE BETWEEN {ts '2008-08-10 00:00:00.0'} AND {ts '2008-09-30 23:59:59.0'}) AND (GEOGRAPHIC_ID = 104)) GROUP BY to_char(REG_DATE, 'YYYY/MM/DD') ORDER BY to_char(REG_DATE, 'YYYY/MM/DD') ASC
Query:ReportQuery(com.cad.registration.RegistrationDetailImpl)
     at com.cad.report.data.DocumentReturnedDataGenImpl.loadData(DocumentReturnedDataGenImpl.java:130)
     at com.cad.report.data.AbstractDataGen.getReport(AbstractDataGen.java:96)
     at com.cad.report.command.ProcessReportRequestOnMessage.run(ProcessReportRequestOnMessage.java:74)
     at com.cad.registration.command.AbstractCommand.execute(AbstractCommand.java:106)
     at com.cad.flow.core.Run.run(Unknown Source)
     at com.cad.flow.core.WorkflowComponent.run(Unknown Source)
     at com.cad.flow.ejbs.WorkflowManagerBean.execute(WorkflowManagerBean.java:238)
     at com.cad.flow.ejbs.WorkflowManagerBean.execute(WorkflowManagerBean.java:135)
     at com.cad.flow.ejbs.WorkflowManager_uh667k_EOImpl.execute(WorkflowManager_uh667k_EOImpl.java:132)
     at com.cad.flow.ejbs.WorkflowManager_uh667k_EOImpl_WLSkel.invoke(Unknown Source)
     at weblogic.rmi.internal.ServerRequest.sendReceive(ServerRequest.java:174)
     at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:335)
     at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:252)
     at com.cad.flow.ejbs.WorkflowManager_uh667k_EOImpl_1001_WLStub.execute(Unknown Source)
     at com.cad.util.WorkflowProxy.runWorkflow(WorkflowProxy.java:128)
     at com.cad.kbd.messenger.listener.mdb.ReportRequestMDB.onMessage(ReportRequestMDB.java:84)
     at weblogic.ejb.container.internal.MDListener.execute(MDListener.java:466)
     at weblogic.ejb.container.internal.MDListener.transactionalOnMessage(MDListener.java:371)
     at weblogic.ejb.container.internal.MDListener.onMessage(MDListener.java:327)
     at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:4072)
     at weblogic.jms.client.JMSSession.execute(JMSSession.java:3964)
     at weblogic.jms.client.JMSSession$UseForRunnable.run(JMSSession.java:4490)
     at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:464)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:200)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:172)
Caused by: Exception [TOPLINK-4002] (Oracle TopLink - 10g Release 3 (10.1.3.3.0) (Build 070620)): oracle.toplink.exceptions.DatabaseException
Internal Exception: java.sql.SQLException: [BEA][Oracle JDBC Driver]Value can not be converted to requested type.Error Code: 0
Call:SELECT COUNT(*), to_char(REG_DATE, 'YYYY/MM/DD') FROM SYSTEM_DETAIL WHERE ((REG_DATE BETWEEN {ts '2008-08-10 00:00:00.0'} AND {ts '2008-09-30 23:59:59.0'}) AND (GEOGRAPHIC_ID = 104)) GROUP BY to_char(REG_DATE, 'YYYY/MM/DD') ORDER BY to_char(REG_DATE, 'YYYY/MM/DD') ASC
Query:ReportQuery(com.cad.registration.RegistrationDetailImpl)
     at oracle.toplink.exceptions.DatabaseException.sqlException(DatabaseException.java:282)
     at oracle.toplink.internal.databaseaccess.DatabaseAccessor.getObject(DatabaseAccessor.java:988)
     at oracle.toplink.internal.databaseaccess.DatabaseAccessor.fetchRow(DatabaseAccessor.java:780)
     at oracle.toplink.internal.databaseaccess.DatabaseAccessor.basicExecuteCall(DatabaseAccessor.java:562)
     at oracle.toplink.internal.databaseaccess.DatabaseAccessor.executeCall(DatabaseAccessor.java:441)
     at oracle.toplink.threetier.ServerSession.executeCall(ServerSession.java:457)
     at oracle.toplink.internal.queryframework.DatasourceCallQueryMechanism.executeCall(DatasourceCallQueryMechanism.java:117)
     at oracle.toplink.internal.queryframework.DatasourceCallQueryMechanism.executeCall(DatasourceCallQueryMechanism.java:103)
     at oracle.toplink.internal.queryframework.DatasourceCallQueryMechanism.executeSelectCall(DatasourceCallQueryMechanism.java:174)
     at oracle.toplink.internal.queryframework.DatasourceCallQueryMechanism.selectAllRows(DatasourceCallQueryMechanism.java:481)
     at oracle.toplink.internal.queryframework.ExpressionQueryMechanism.selectAllRowsFromTable(ExpressionQueryMechanism.java:825)
     at oracle.toplink.internal.queryframework.ExpressionQueryMechanism.selectAllReportQueryRows(ExpressionQueryMechanism.java:791)
     at oracle.toplink.queryframework.ReportQuery.executeDatabaseQuery(ReportQuery.java:518)
     at oracle.toplink.queryframework.DatabaseQuery.execute(DatabaseQuery.java:620)
     at oracle.toplink.queryframework.ObjectLevelReadQuery.execute(ObjectLevelReadQuery.java:779)
     at oracle.toplink.queryframework.ReadAllQuery.execute(ReadAllQuery.java:451)
     at oracle.toplink.publicinterface.Session.internalExecuteQuery(Session.java:2089)
     at oracle.toplink.publicinterface.Session.executeQuery(Session.java:993)
     at oracle.toplink.publicinterface.Session.executeQuery(Session.java:965)
     at oracle.toplink.publicinterface.Session.executeQuery(Session.java:878)
     at com.cad.persistence.toplink.TopLinkPersistenceBrokerImpl.executeQuery(TopLinkPersistenceBrokerImpl.java:420)
     at com.cad.report.data.DocumentSys.getSummitedDocumentNumber(DocumentSys.java:332)
     at com.cad.report.data.DocumentSys.loadData(DocumentSys.java:110)
     ... 24 more
Caused by: java.sql.SQLException: [BEA][Oracle JDBC Driver]Value can not be converted to requested type.
     at weblogic.jdbc.base.BaseExceptions.createException(Unknown Source)
     at weblogic.jdbc.base.BaseExceptions.getException(Unknown Source)
     at weblogic.jdbc.base.BaseData.getTimestamp(Unknown Source)
     at weblogic.jdbc.base.BaseResultSet.getTimestamp(Unknown Source)
     at weblogic.jdbc.wrapper.ResultSet_weblogic_jdbc_base_BaseResultSet.getTimestamp(Unknown Source)
     at oracle.toplink.internal.databaseaccess.DatabaseAccessor.getObjectThroughOptimizedDataConversion(DatabaseAccessor.java:1038)
     at oracle.toplink.internal.databaseaccess.DatabaseAccessor.getObject(DatabaseAccessor.java:942)
     ... 45 more

Here is my code
ExpressionBuilder builder = new ExpressionBuilder();
ReportQuery query = new ReportQuery(RegistrationDetailImpl.class, builder);
query.addArgument("startTime");
query.addArgument("endTime");
query.addArgument("lro");
Expression lroCol = builder.get("lro");
Expression regDateCol = builder.get(
QueryConstants.RegistrationDetailQueryConstants.REGISTRATION_NUMBER_COL).get(
QueryConstants.RegistrationDetailQueryConstants.REGISTRATION_DATE_COL);
Expression formattedRegDateCol = regDateCol.getFunction("to_char", "YYYY/MM/DD");
Expression timeExp = regDateCol.between(builder.getParameter("startTime"), builder
.getParameter("endTime"));
Expression lroExp = lroCol.equal(builder.getParameter("lro"));
query.setSelectionCriteria(timeExp.and(lroExp));
query.addCount();
query.addAttribute("regDate", formattedRegDateCol);
query.addGrouping(formattedRegDateCol);
query.addOrdering(formattedRegDateCol.ascending());
descriptor.getDescriptorQueryManager().addQuery("testquery", query);

Error-- Condition type MWST tax code A0 does not exist

I have an Invoice and it didnu2019t pass for accounting entry.
The error is promptu201D Condition type MWST tax code A0 does not existu201D, It never came at the time of Sales order creation.
Diagonosis says the following
When calculating tax, the system tried to determine the condition amount and the condition number from tables A003 and A053 using the specified condition type and tax code. However, no values were found there.
Procedure says the following thing
Check the Customizing settings for the specified tax code. Check whether the validity period (possible with tax jurisdictions) is defined.
Please guide.

Christiano,
First let analyze the situation.
1. Execute Tcode VA02 --> Item Details --> Conditions tab --> Click Analysis button. Try to find for condition Type MWST whether values are flowing.
If it is not there then you have not maintained condition record.
2. Tax Code.
Execute FTXP Tcode , Check For A0 Tax code check whether you have maintained any value. if yes then check in condition record, whether you created record with Tax Code - A0
If everything above is perfect and correct
3. Check Copy Controls and Pricing type
Check the Validation period (it should not be the problem)
Check and Revert
Regards
Sathya
Edited by: Sathya Pavan Yedavalli venkata on Apr 21, 2009 2:06 PM

I have burned CDs before from 2gb to 7gb using different types of discs. Now I get this error message Apple error The disc can't be burned because communication between the computer and the disc drive failed (error code 0x80020022). What should I do

I have burned CDs before from 2gb to 7gb using different types of discs. Now I get this error message Apple error The disc can't be burned because communication between the computer and the disc drive failed (error code 0x80020022). What should I do

Reset the SMC, as per > Resetting the System Management Controller (SMC)
1. Shut down the computer.
2. Unplug the computer's power cord.
3. Wait fifteen seconds.
4. Attach the computer's power cord.
5. Wait five seconds, then press the power button to turn on the computer.
Then zap the PRAM/NVRAM as per > About NVRAM and PRAM
1. Shut down the computer.
2. Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
3. Turn on the computer.
4. Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
5. Hold the keys down until the computer restarts and you hear the startup sound for the second time.
6. Release the keys.
Then retry the Disc Drive.

Why do error code vc80.crt,type''win32''pops up when i try to download itunes

why do error code vc80.crt,type''win32''pops up when i try to download itunes

These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? (For example, 8007000B.)

K450e motherboard replaced now says error code 00ce machine type and serial number invalid

Hey guys i just got a replacement motherboard, after motherboard was replaced on bootup the computer says error code 00ce: machine type and serial number are invalid. How do i get rid of this error it was replaced by the same motherboard type that was previously in the system. How can i reset the bios or enter the serial etc? Lenovo tech support was no help.

Hi Qjafri829,
Welcome to Lenovo Community!
As per the query we understood that you are facing issue with serial number invalid error in your k450e desktop.
As the motherboard been replaced the serial number and MTM number must be updated this is a new motherboard, you can visit to the nearest authorized service center for the serial number update in the BIOS.
Click here to open a link where you can select the country and get the exact contact support number. I’m sure
they will be a great help.
Hope this helps. Do post back if issue persists!
Best regards,
Ashwin.S
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Type Mismatch error while calling a Java Function from Visual Basic 6.0...

Hi,
I'm having a problem in calling the Java Applet's Function from Visual Basic. First, I'm getting the handle of the Java Applet and components of it using "Document.Applets(n)" which is a HTML function. I'm calling this function from Visual Basic. My code is something like this...
' // Web1 is IE Browser in my Form.
Dim Ap,Comp
Dim Bol as Boolean
Bol = true
Ap = Web1.Document.Applets(0).getWindow() ' \\ Gets the Parent Window.
Ap.setTitle("My Java Applet") ' \\ Sets the Title of the window.
msgbox Ap.getVisibility() ' \\ This will return a Java boolean ( true or false )
Ap.setVisibility(Bol) ' \\ Function Syntax is : void setVisibility(boolean b)
Here in my code , i'm able to call any function that which accepts Integer or String but not boolean. So, i m facing problem with Ap.setVisibility() function. It gives me a "Type mismatch error" while executing it. Can you please tell me a way to do this from Visual Basic !
I'm using Visual Basic 6.0, Windows 2000 , J2SDK 1.4.2_05.
Please help me Friends.
Thanks and Regards,
Srinivas Annam.

Hi
I am not sure about this solution. try this
Declare a variable as variant and store the boolean value in that variable and then use in ur method.
Post ur reply in this forum.
bye for now
sat

Error code 50 CC desktop app install

I tried to update the creative cloud desktop app and it has now disappeared, I tried to re-install the app but it failed with "error code 50". I searched this error code and followed the link in the forum replies http://helpx.adobe.com/creative-cloud/kb/failed-install-creative-cloud-desktop.html, this relates to error code 1. nevertheless I ran the cleaner tool and it completed successfully. i again tried to reinstall CC app for desktop and again got error code 50. Need this sorted asap!

Sheenag99555967 did you also rename the OOBE folder after running the CC Cleaner Tool? What operating system are you using? What type of environment is this computer located in?

Types of error codes in CX_AI_SYSTEM_FAULT

Similar Messages

Maybe you are looking for