Tyre history maintain along with Fleet Equipment

Dear SAP Expert,
Please suggest us how can I maintain the TYRE History(Running Km,transfer from one Equi to Other Equi.) details with Fleet Equipment.
Kindly, give us solution as soon as possible.
Regards
Akhilesh

Dear Friend,
you can follow as pushpa says or else create your fleet object as one functional location and all parts example - engine, tyres and hydraulic system as equipments and install them in that location. Create measuring points for all thos eequipments and create ENTRYLIST using t.code IK31 and assign all related measuring points to that list.
if you are replacing any tyre of fleet object-1 by fleet objcet-2, just dismantle it form that functional location and assign new functional location.
with this you can have report of how many days it was with fleet onbjet -1 and how many dayw with fleet object-2 assigned.
Regards,
Pardhu
Edited by: PARDHA SARADHIREDDY.C on Jul 20, 2010 7:34 AM

Similar Messages

Downloading master warranties along with the EQUIPMENT

Hi CRMGurus,
 I am downloading EQUIPMENT from ECC to CRM. But warranty information in ECC is not getting downloaded to CRM. There is no BDoc error as such.
Does any body has an idea, will this happen? If yes is there any setting needs to be done.
Thanks,
Best regards,
Vinay

Hi Vinay,
 Please Check for The Filter Parameters "Table/Structure within Objects" in your "Equipment Filter
Ensure that the Following Entry is Present which brings the Warranty Details from ECC System to CRM system.
EQUI<Table Name> SMOEQUI<Mapped Structure>
Please Download after This Entry and Chk the Details must appear as Required.
Thanks and Regards,
RK.

TFS 2012 work items migration to TFS 2013 along with History,Links/Attachments & Custom fields??

Dear All,
TFS 2012 work items migration to TFS 2013 along with History,Links/Attachments & Custom fields?? is there any way..
Tried couple of tools:
1) Excel based migration : loss of data is custom fields, links, attachments, status
2) few tools in Code plex : Crashing/Not working.
Kindly provide your valuable comments here.
Cheers, Tarun

Hi Tarun,
I'd like to know the tools that you used in CodePlex. Generally, CodePlex project is not supported in MSDN forum, and you can post your questions and concerns in the issue secton of the project.
If you use TFS integration tools, according to this
blog, it is limited to migrating only Version Control items, Work Items, and the links between them. Please check the limiation and have a check with your migration. For the customized fields, you might need to do the same customizatoin on the target
team project.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place. Click <a
href="http://support.microsoft.com/common/survey.aspx?showpage=1&scid=sw%3Ben%3B3559&theme=tech"> HERE</a> to participate the survey.

Move documents along with its version through workflow

hi
suggest which of the 2 ways is possible through Designer workflow,
1)can i move a document along with its version to another library where same settings are enabled.
2)can i move a document from a library and add as a new version to another item present in another library.
Thanks

Hi Krishna,
When you move a document to another library by a SharePoint Designer Workflow, the version history is
not maintained. This behavior is by design, because the version history of a document is relative
to its original document library. The moved document is considered as a new document in
the destination library.
The only solution is to move the documents via Windows Explorer or through Manage Content & Structure.
Open the two document libraries in Windows Explorer and move your files from source to destination or move your files through Manage Content & Structure.
The Manage Content & Structure feature is only available in Enterprise edition.
NOTE: The version will be maintained if you MOVE the files. If the files are COPIED
it will not maintain the version.
Please remember to click 'Mark as Answer' if the reply answers your query or 'Upvote' if it helps you.

Fleet Equipment

Hi,
Can I use my normal equipment as Fleet equipment.?
What difference does it make if its a fleet equipment with category F?
Please throw your inputs
Regards

Hi,
Mapping Equipment as Fleet allows you to have two additional views,where you can maintain data pertainig to vehicles ,like Licience plate no ,Mfg. ,Engine type,and Engine Serial No, Engine power,capacity,Chasis no etc,
in addition to that you can get average for fuel consumption ,automatic material posting using IFCU txn
and report for that ,
Regards
Pravin
Edited by: Pravin on Nov 27, 2009 5:53 AM
Edited by: Pravin on Nov 27, 2009 5:56 AM

To capture the selected rows along with edited field contents in alv report

Dear All,
         I do have requirement where, in alv report output one field is editable and need to save the content of the edited field along with the selected rows.
         For example If there are 10 records displayed in the alv output with 20 fields.
Out of this 20 fields one field (say XYZ) is editable. Also i have already created a new pushbutton (say ABC) on alv output. Now in the alv output if we maintain some value in the field (XYZ ) for the 2nd and 4th record and select this two records, and when clicked on the pushbutton (ABC) it has to update the DB table.
      I am using the Func Module 'REUSE_ALV_GRID_DISPLAY'.
      Your early reply with sample code would be appreciated.
Thanks in Advance.

HI Naveen ,
There is an import parameter "i_callback_program" in the function module,
plz pass the program name to it.
Capture the command by passing a field of type sy-ucomm to "I_CALLBACK_USER_COMMAND ". Check the returned command and
and program a functionality as desired.
u can try the event double_click or at line selection. there u can use READLINE command to c if the line has been selected.
In case it is , process the code segment.
Regards
Pankaj

How to use SAP Business Workflow along with Interactive Adobe Form

Hi Experts,
I am working on SAP Business Workflow since last couple of years.
Now i have got a new Project where client wants to use SAP Business Workflow along with Interactive Adobe Form.
I am new to Interactive Adobe Form and Portal thing and i really dont know from where to start.
We have one central system and 2 local systems. when we do create a Material document using adobe form workflow should trigger and notification should go to group of users who can approve or reject it, once they approve it document gets created in central system and replicated to 2 local system through ALE.
In the Local system they do extend the document to different plants, again workflow triggers and notification will go to Managers inbox for the approval.
Once the final approval done data should go and store in SAP.
Now here i have couple of Questions.
1. In SAP R3 Business workflow when i execute the workitem from the inbox i do get the application screen ( i.e. MM01 MRP View ) , what is going to happen if the same case i have with Adobe form?? is it possible or do we have to design a adobe form and we will have to map the fields with backend application??
2. Do i have to maintained 3 separate Org Structure for 3 different system or using UWL i can manage the show
3. Untill final submit is not done, where the application data is going to be, is there any kind of buffer that we will have to keep it or its there with XML file??
Please help me out.
Thanks in Advance.
Regards,
Manoj

Hi Manoj,
Welcome to ADOBE Forms related Workflow Development. Well, here are my answers.
1) You can go for either go for ISR based development or WD development with Adobe form. In both the cases you can achieve your requirement. Yes, you will have to design the Adobe form and bind the fields to backend.
2) Am not clear or your System landscape to advice you in these regards.
3) Until final Submit/Approval is done, the data can be stored in WORKFLOW CONTAINERS or XML FORM(If you go for ISR based Development).
Hope this helps.
Regards
Raja Sekhar

In the upper part of Firefox there is normally a box to type in URL's. I have lost that box/area. Along with that I have no back of forward buttons to view the last/next internet pages. Can you help?

I have lost the box on the top part of the Firefox page where one types in a URL. Along with that, I have no back or forward buttons. Help please
== This happened ==
Just once or twice
== tonight

Those items are on the Navigation Toolbar; see below
'''Can't see the Menu Bar''' (File, Edit, View, History, Bookmarks, Tools, Help)?
Turning the Menu Bar on and off is a new feature in version 3.6.
''(Linux & OSX see: [[Menu bar is missing]] )''
''Windows'' Method 1. '''''Hold down''''' the key and press the following letters in this exact order: V T M
''Windows'' Method 2. Press and release the key. The Menu Bar will be displayed; then choose ~~red:V~~iew > ~~red:T~~oolbars and click on ~~red:M~~enu Bar.
The Menu Bar should now be displayed permanently, unless you turn it off again using View > Toolbars. Check mark = displayed, NO check mark = not displayed.
See: http://support.mozilla.com/en-US/kb/Menu+bar+is+missing
'''Navigation Toolbar, Bookmarks Toolbar and other Toolbars''' under View > Toolbars. Clicking on one of them will place a check mark (display) or remove the check mark (not displayed).
'''To display the Status Bar''', View, then click Status bar to place a check mark (display) or remove the check mark (not displayed).
'''Full Screen mode'''
http://kb.mozillazine.org/Netbooks#Full_screen
Also see:
''' [[Back and forward or other toolbar buttons are missing]]'''
'''[[Navigation Toolbar items]]'''
'''''Other Issues''''': ~~red:You have installed plug-ins with known security issues. You should update them immediately.~~
'''Update Java''': your ver. 1.6.0.18; current ver. 1.6.0.20 (important security update 04-15-2010)
(Firefox 3.6 and above requires Java 1.6.0.10 or higher; see: http://support.mozilla.com/en-US/kb/Java-related+issues#Java_does_not_work_in_Firefox_3_6 )
''(Windows users: Do the manual update; very easy.)''
~~red:Check your version here~~: http://www.mozilla.com/en-US/plugincheck/
See: '''[http://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox#Updates Updating Java]'''
Do the update with Firefox closed.
'''Install/Update Adobe Reader for Firefox (aka Adobe PDF Plug-In For Firefox)''': your ver. 9.3.2; current ver. 9.3.3 (important security update release 06-29-2010; see: http://www.adobe.com/support/security/bulletins/apsb10-15.html)
~~red:Check your version here~~: http://www.mozilla.com/en-US/plugincheck/
See: http://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox#Installing_and_updating_Adobe_Reader
''You may be able to update from the Adobe Reader installed on your system'' instead of going to the Adobe site and downloading. Start > Program Files, find and click Adobe Reader to open, click Help, click Check for Updates.
''If you go to the Adobe site to download the current Adobe Reader:''
-'''use Firefox to download''' and '''SAVE to your hard drive''' (save to Desktop for easy access)
~~red:-See the images at the bottom left of this post to see the steps to take on the Adobe site~~
-exit Firefox (File > Exit)
-check to see that Firefox is completely closed (''Ctrl+Alt+Del, choose Task Manager, click Processes tab, if "firefox.exe" is on the list, right-click "firefox.exe" and choose End process, close the Task Manager window'')
-double-click on the Adobe Reader installer you just downloaded to install/update Adobe Reader
*'''NOTE: On Vista and Windows 7''' you may need to run the plugin installer as Administrator by starting the installer via the right-click context menu if you do not get an UAC prompt to ask for permission to continue (i.e nothing seems to happen). See this: http://vistasupport.mvps.org/run_as_administrator.htm
*'''NOTE for IE:''' Firefox and most other browsers use a Plugin. IE uses an ActiveX version. To install/update the IE ActiveX version, same instructions as above, except use IE to download the ActiveX installer.
*Also see: http://kb.mozillazine.org/Adobe_Reader ~~red:'''''AND'''''~~ [[How do I edit options to add Adobe to the list of allowed sites]]

How to make plant default on the line item along with the item category

Hi All,
I want to default Plant on the line item along with the item category.In order to meet the following scnario.
1. I have two plants,first plant is maintained for the valuated item and the second plant is maintained for the non valuated item (Free Goods).
Whenever user is entering an item in the sales order for which corresponding free goods item is maintained in the master record.System is proposing two lines items in the sales order.
First line item is the main item which appears along with the Plant 1 which contains valuated items
Second line item is for the Free of charge item which is being proposed from Plant 2, which contains the non valuated items.
I want that the system should always propose Plant 1 with main item and Plant 2 with the Free of Charge item by default. (Along with the item category TAN and TANN)
Rahul

Delivering Plant is determined in the following order
1. Customer material info record.
2. Customer master
3. Material master.
Use one of them an default your plant.
I think in your case you can use the materila master which will give an item level plant different. The other two will default the plant at the header level.
regards
jude

Attaching a document along with payment advice during F110

Hi All,
when i run F110 all payments with payment mode 'T'(telegraphic) are mailed to the respective vendors and all payments with mode 'K'(Credit) are displayed in the spool(SP01).
Now the requirement is that the contract of the vendor(contract document is attached in the vendor master-FK02) should also me mailed along with the payment advice.
I created a Z-program(copied from RFFOEDI1) which downloads this contract document from vendor master onto the desktop and then uploads this and sends it to the customer.
However when i do this the mail request for the contract document is being generated(as can be seen in the send requests list (t-code SOSG) and the mail also gets triggered when i process it in SCOT), but no mail request is being generated for the payment advice .
Also no spool for payment advices with payment mode 'K' is generated in SP01.
Any help is appreciated and will be rewared generously.
Thanks in advance.
Najam
I am attaching the part of code i have inserted -
REPORT RFFOEDI1.
INCLUDE ZDWNLD_ATTA.
 F110ID-LAUFD = ZW_LAUFD.
 F110ID-LAUFI = ZW_LAUFI.
 F110ID-OBJKT = KON_PARAM.
PERFORM F_MAIL_CONTRACT.
INSERT T012D-EDIPN INTO HEADER.
AT SELECTION-SCREEN ON PAR_WFOR.
IF PAR_WFOR NE SPACE.
 SET CURSOR FIELD 'PAR_WFOR'.
 CALL FUNCTION 'FORM_CHECK'
 EXPORTING
 I_PZFOR = PAR_WFOR.
ENDIF.
FORM F_MAIL_CONTRACT .
 F110ID-LAUFD = ZW_LAUFD.
 F110ID-LAUFI = ZW_LAUFI.
 F110ID-OBJKT = KON_PARAM.
IMPORT SLKTAB FROM DATABASE RFDT(FB) ID F110ID.
READ TABLE SLKTAB INDEX 1.
IF SY-SUBRC = 0.
 W_LIFNR = SLKTAB-VONKT.
ENDIF.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
 INPUT = W_LIFNR
IMPORTING
 OUTPUT = W_LIFNR .
*Get vendor Email Address
SELECT SINGLE * FROM LFA1 WHERE LIFNR = W_LIFNR.
IF SY-SUBRC = 0.
SELECT SINGLE * FROM ADR6 WHERE ADDRNUMBER = LFA1-ADRNR.
ENDIF.
W_RECIPIENT = ADR6-SMTP_ADDR.
PERFORM DOWNLOAD_ATT USING W_LIFNR.
PERFORM UPLOAD_ATT_SEND_MAIL USING W_RECIPIENT LTP_FILENAME .
ENDFORM. " F_MAIL_CONTRACT
FORM DOWNLOAD_ATT USING P_W_LIFNR.
SO_INSTI = P_W_LIFNR.
SELECT * FROM SRGBTBREL INTO TABLE TA_SRGBTBREL
WHERE INSTID_A = SO_INSTI
 AND TYPEID_A = SO_TYPID
 AND CATID_A = SO_CATID.
IF SY-SUBRC EQ 0.
 SORT TA_SRGBTBREL BY INSTID_A TYPEID_A CATID_A.
 DELETE ADJACENT DUPLICATES FROM TA_SRGBTBREL
 COMPARING INSTID_A TYPEID_A CATID_A.
 LOOP AT TA_SRGBTBREL INTO WA_SRGBTBREL.
 PERFORM PROCESS_ATTACHMENTS
 USING WA_SRGBTBREL-INSTID_A
 WA_SRGBTBREL-TYPEID_A
 WA_SRGBTBREL-CATID_A.
 ENDLOOP.
ENDIF.
ENDFORM. " download_att
FORM UPLOAD_ATT_SEND_MAIL USING P_W_RECIPIENT
 P_LTP_FILENAME.
RECEIVER = P_W_RECIPIENT.
PERFORM ML_CUSTOMIZE USING 'Tst' 'Contract'.
PERFORM ML_ADDRECP USING RECEIVER 'U'.
PERFORM UPL.
PERFORM DOCONV TABLES I_ITAB OBJBIN.
PERFORM ML_PREPARE USING 'X' EXTENSION NAME.
PERFORM ML_DOSEND.
FORM ML_CUSTOMIZE USING OBJNAME
 OBJDESC.
CLEAR DOCDATA.
REFRESH OBJPACK.
CLEAR OBJPACK.
REFRESH OBJHEAD.
REFRESH OBJTXT.
CLEAR OBJTXT.
REFRESH OBJBIN.
CLEAR OBJBIN.
REFRESH OBJHEX.
CLEAR OBJHEX.
REFRESH RECLIST.
CLEAR RECLIST.
REFRESH LISTOBJECT.
CLEAR LISTOBJECT.
CLEAR TAB_LINES.
CLEAR DOC_SIZE.
CLEAR ATT_TYPE.
DOCDATA-OBJ_NAME = OBJNAME.
DOCDATA-OBJ_DESCR = OBJDESC.
ENDFORM. " ml_customize
FORM ML_ADDRECP USING PRECEIVER PREC_TYPE.
CLEAR RECLIST.
RECLIST-RECEIVER = PRECEIVER.
RECLIST-REC_TYPE = PREC_TYPE.
APPEND RECLIST.
ENDFORM. " ml_addrecp
FORM UPL .
FILE_NAME = LTP_FILENAME.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
FILENAME = FILE_NAME
FILETYPE = 'BIN'
TABLES
DATA_TAB = I_ITAB
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_READ_ERROR = 2
NO_BATCH = 3
GUI_REFUSE_FILETRANSFER = 4
INVALID_TYPE = 5
NO_AUTHORITY = 6
UNKNOWN_ERROR = 7
BAD_DATA_FORMAT = 8
HEADER_NOT_ALLOWED = 9
SEPARATOR_NOT_ALLOWED = 10
HEADER_TOO_LONG = 11
UNKNOWN_DP_ERROR = 12
ACCESS_DENIED = 13
DP_OUT_OF_MEMORY = 14
DISK_FULL = 15
DP_TIMEOUT = 16
OTHERS = 17.
PATH = FILE_NAME.
CALL FUNCTION 'PC_SPLIT_COMPLETE_FILENAME'
EXPORTING
COMPLETE_FILENAME = PATH
IMPORTING
EXTENSION = EXTENSION
NAME = NAME
EXCEPTIONS
INVALID_DRIVE = 1
INVALID_EXTENSION = 2
INVALID_NAME = 3
INVALID_PATH = 4
OTHERS = 5.
ENDFORM. " upl
FORM DOCONV TABLES MYPDF STRUCTURE TLINE
 OUTBIN STRUCTURE SOLISTI1.
DATA : POS TYPE I.
DATA : LEN TYPE I.
LOOP AT MYPDF.
POS = 255 - LEN.
IF POS > 134. "length of pdf_table
POS = 134.
ENDIF.
OUTBIN+LEN = MYPDF(POS).
LEN = LEN + POS.
IF LEN = 255. "length of out (contents_bin)
APPEND OUTBIN.
CLEAR: OUTBIN, LEN.
IF POS < 134.
OUTBIN = MYPDF+POS.
LEN = 134 - POS.
ENDIF.
ENDIF.
ENDLOOP.
IF LEN > 0.
APPEND OUTBIN.
ENDIF.
ENDFORM. " doconv
*& Form ml_prepare
 text
FORM ML_PREPARE USING BYPASSMEMORY WHATATT_TYPE WHATNAME.
IF BYPASSMEMORY = ''.
CALL FUNCTION 'LIST_FROM_MEMORY'
TABLES
LISTOBJECT = LISTOBJECT
EXCEPTIONS
OTHERS = 1.
IF SY-SUBRC EQ 0.
MESSAGE ID '61' TYPE 'E' NUMBER '731'
WITH 'LIST_FROM_MEMORY'.
ENDIF.
CALL FUNCTION 'TABLE_COMPRESS'
TABLES
IN = LISTOBJECT
OUT = OBJBIN
EXCEPTIONS
OTHERS = 1
IF SY-SUBRC EQ 0.
MESSAGE ID '61' TYPE 'E' NUMBER '731'
WITH 'TABLE_COMPRESS'.
ENDIF.
ENDIF.
*Packing Info For Text Data
DESCRIBE TABLE OBJTXT LINES TAB_LINES.
READ TABLE OBJTXT INDEX TAB_LINES.
DOCDATA-DOC_SIZE = ( TAB_LINES - 1 ) * 255 + STRLEN( OBJTXT ).
CLEAR OBJPACK-TRANSF_BIN.
OBJPACK-HEAD_START = 1.
OBJPACK-HEAD_NUM = 0.
OBJPACK-BODY_START = 1.
OBJPACK-BODY_NUM = TAB_LINES.
OBJPACK-DOC_TYPE = 'TXT'.
APPEND OBJPACK.
*Packing Info Attachment
ATT_TYPE = WHATATT_TYPE..
DESCRIBE TABLE OBJBIN LINES TAB_LINES.
READ TABLE OBJBIN INDEX TAB_LINES.
OBJPACK-DOC_SIZE = ( TAB_LINES - 1 ) * 255 + STRLEN( OBJBIN ).
OBJPACK-TRANSF_BIN = 'X'.
OBJPACK-HEAD_START = 1.
OBJPACK-HEAD_NUM = 0.
OBJPACK-BODY_START = 1.
OBJPACK-BODY_NUM = TAB_LINES.
OBJPACK-DOC_TYPE = ATT_TYPE.
OBJPACK-OBJ_NAME = 'ATTACHMENT'.
OBJPACK-OBJ_DESCR = WHATNAME.
APPEND OBJPACK.
ENDFORM. " ml_prepare
*& Form ml_dosend
 text
--> p1 text
<-- p2 text
FORM ML_DOSEND .
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
DOCUMENT_DATA = DOCDATA
PUT_IN_OUTBOX = 'X'
COMMIT_WORK = 'X' "used from rel. 6.10
TABLES
PACKING_LIST = OBJPACK
OBJECT_HEADER = OBJHEAD
CONTENTS_BIN = OBJBIN
CONTENTS_TXT = OBJTXT
RECEIVERS = RECLIST
EXCEPTIONS
TOO_MANY_RECEIVERS = 1
DOCUMENT_NOT_SENT = 2
DOCUMENT_TYPE_NOT_EXIST = 3
OPERATION_NO_AUTHORIZATION = 4
PARAMETER_ERROR = 5
X_ERROR = 6
ENQUEUE_ERROR = 7
OTHERS = 8
*IF SY-SUBRC EQ 0.
*MESSAGE ID 'SO' TYPE 'S' NUMBER '023'
*WITH DOCDATA-OBJ_NAME.
*ENDIF.
ENDFORM. " ml_dosend

Hi,
As far as I remember there are no direct ways in SAP do to that.
One suggestion. Create a custom program to send emails and save it with a variant in DME (the last Tab in F110). This is the same place where you maintain the details for sending out the EDI information.
Once you are done with F110, you can carry out the print functionality to execute the program to send out emails with the payment advice.
hope this helps.
Regards

Third party sales along with subcontracting.

Dear Experts,
Currently in our company we are having a scenario for third party sales along with subcontracting. the scenario is as explained under.
Company
A B C, D, E (vendors)
A raises a PO to B for the purpose of procurement of material X and services Y .
B generates a Sales Order against A's PO and performs procurement of material X
from vendor C. C delivers the goods directly to A and invoices B.
Now here the requirement is that material X is common in company A & B and I need to maintain
the consumption and valuation of material X in both company codes.
How is this done.
In context to the above scenario;
Now the material which has been delivered by company C (vendor) to Company A;
again this company A gives the same material X (which now becomes raw material or spares)
to B as free issue for the purpose of project.
Through normal Third Party sales order created in company B; the system issues me the following message

Hi,
Actually the scenario is that company A & B both are different but wish to interface their operations
in order to achieve speedy transactions. If both were under same company umbrella then intercompany would have been possible. But in this case these are two different companies all together.
thank you for your response.
Regards
Vivek
Edited by: Vivek A. Chokshi on Jan 9, 2009 6:09 PM

(Sales & Operations Planning) - Can we use RMCPSOP along with IDoc method

Hi,
While transferring data to demand mgmt(SOP) using the standard mass processing, sometimes the job is getting failed with error u201CNo period unit maintained in material masteru201D, after analysing the code which is triggering this error, we found that when ever an S076E is not the for corresponding Planning entry, it is triggering the error.
We are using the standard mass processing job using IDoc method to update S076((Sales & Operations Planning), we found that sometimes the S076E table was not getting updated with the Material/Plant combination. As suggested in SAP Note 500354 Program RMCPSOP can be used to synchronize S076 and S076E tables. Seeing the technical description of the suggested program it will create S076 and S076E entries based on PGMI and PGZU tables.
My question is
1) Can we use the RMCPSOP along with IDoc method, does it overwrites the S076 entries which were updated with IDoc method?
2) At what step should the RMCPSOP executed if we use IDoc method.
Regards
Bala Krishna

> I am planning to use WMMBID02 for it.
> Although I found in Std SAP it is available for inbound only but I feel we can generate this idoc using user exit available at the time of "material document posting".
>
If you find nearly all the fileds which are asked by ur partner in that idoc, thats fine.
> my second query is , in this idoc along with other information we also have to send information related to "REASON CODE" and "To Stock Status" ( Like in case material is transferred from Blocked to unrestricted stock type and To Stock status will be Unrestricted ) but these fields are not available in idoc defination , what should I do ?
>
You can extend the idoc, if you still think that you are having enough fileds in standard idoc, which are usefull.
Reddy

Can a Cube or ODS be transported along with contents

Hi All,
Can we transport InfoProviders along with their contents?
Our requirement is: We have few InfoProviders in QA which have been loaded with actual data, but unfortunately we lost the data files.
Now we want to move these objects to Production, is there any way we achieve this?
Please let me know.
Regards,
Vikrant.

hi Vikrant,
or you can use data mart scenario,
create source system bw qa in prod, replicate datasource,
create new infosource in prod and assign with ods generated datasource 8[odsname] from bw qa.
create update rules for ods and assign with this new infosource. create infopackage with 'full upload'.
hope this helps.
technically i think it's possible to transport ods active table entries, but not recommended, we can change ods active table (se11) to 'maintainance allowed', then se16, display all records, and choose menu 'table entry'->'transport entries'. create request and import to prod.

Check printing in English along with Arabic language

Hi,
My requirement is to print check in English along with Arabic language.
All details in English, except vendor name, which should be in Arabic.
I am maintaining two forms one in English and 2nd in Arabic language.
2nd form which is in arabic is meant for Vendor name in arabic.
My print program flow in brief is as follows:
OPEN_FORM.
In between, after writing all the English details, i am ending the English form and then starting Arabic form and printing vendor name and ending the Arabic form.
CLOSE_FORM.
In stead of single page I am getting 2 pages as output.
Page1: English details, without Arabic name.
Page2:Vendor name alone in Arabic.
Can you please tell me how to print vendor name also on the 1st page itself along with other details in english.
Thanks & Regards
Seshagiri

Hi,
Have you got the solution to your problem? what you did?
Actually I am now have the same problem. I have to print the korean text (Customer Address which is in korean in master table). in debugging mode it is coming correct. while printing it is prnting as #. Currently i am maintaining only one form in english.
Have you maintained two forms or how you did to display the arebic?
Its urgent please reply.....
Thanx In advance

ECN Export to cFolder along with Affected item

Hi Experts,
We have a requirement to export ECN along with all the affected item and history of ECN in PDX format.
I am using cFolder to export the BOM in PDX format. There is no option to export the ECN from SAP to cFolder using CFE02
transaction.
I can export the ECN to cFolder using FM CFX_S_API_WRITE. But, I also want to link the Affected items to ECN while exporting.
My question is
Is there any way (any FM or Method) so that I can read existing SAP BOM in terms of cFolder attributes (like CFE02)
and pass it to FM CFX_S_API_WRITE?
There could be many BOM in an ECN and it is required to write all the fields of BOM so it is hard to write BOM using CFX_S_API_WRITE.
Regards,
Atul

check out this class
CL_CFX_BI_BOM -> GET_BS_DATA this is used to read the ERP BOM details.
then check out EXPORT and EXPORT_VERSION ( ). To understand how to convert the ERP data into the cFolders structure.

Tyre history maintain along with Fleet Equipment

Similar Messages

Maybe you are looking for