Fleet Equipment

Hi,
Can I use my normal equipment as Fleet equipment.?
What difference does it make if its a fleet equipment with category F?
Please throw your inputs
Regards

Hi,
Mapping Equipment as Fleet allows you to have two additional views,where you can maintain data pertainig to vehicles ,like Licience plate no ,Mfg. ,Engine type,and Engine Serial No, Engine power,capacity,Chasis no etc,
in addition to that you can get average for fuel consumption ,automatic material posting using IFCU txn
and report for that ,
Regards
Pravin
Edited by: Pravin on Nov 27, 2009 5:53 AM
Edited by: Pravin on Nov 27, 2009 5:56 AM

Similar Messages

  • Fleet Equipment data transfer

    Please advise on how to load Fleet Equipment specific fields such as Primary Fuel (FUEL_PRI) and Calculation Method (PRI_CALC). My investigation into the provided IBIP* stuctures and Equipment BAPIs was unsuccessful. My goal is to use LSMW.
    Thanks
    Mark Kuckuk

    hi,
    you can surely use lsmw for fleet equipment master data.
    during using lsmw what are the problem you are facing.
    regards,
    santosh

  • Tyre history maintain along with Fleet Equipment

    Dear SAP Expert,
                                   Please suggest us how can I maintain the TYRE History(Running Km,transfer from one Equi to Other Equi.) details with Fleet Equipment.
    Kindly, give us solution as soon as possible.
    Regards
    Akhilesh

    Dear Friend,
    you can follow as pushpa says or else create your fleet object as one functional location and all parts example - engine, tyres and hydraulic system as equipments  and install them in that location. Create measuring points for all thos eequipments and create ENTRYLIST using t.code IK31 and assign all related measuring points to that list.
    if you are replacing any tyre of fleet object-1 by fleet objcet-2, just dismantle it form that functional location and assign new functional location.
    with this you can have report of how many days it was with fleet onbjet -1 and how many dayw with fleet object-2 assigned.
    Regards,
    Pardhu
    Edited by: PARDHA SARADHIREDDY.C on Jul 20, 2010 7:34 AM

  • Fleet equipment Subequipment

    Hi experts,
    Can you please tell me if i am creating the sub equipment for the truck which view profile i have to assign to that equipment.
    Suppose i am creating truck's engine or Motor as an equipment should i provide the vie profile of FLEET or general equipment view profile.And also suggest me against which category i have to create should i create with only FLEET or engine with M category & Motor with E category.
    AR
    Edited by: Amit  Rana on Apr 14, 2010 11:53 AM

    Hi Experts,
    My only concern is that should i use the view profile of general equipment or Fleet while creating the subequipment for Fleet.
    For e.g. if i am creating the engine of the Truck with general view profile insteed of fleet view profile is it create any problem.
    Please share your experience to achieve the best.The thing is that in both the view profile it will have different screen so suggest me the standard practice which will improve the master data.
    AR

  • Fleet Equipment-IFCU-Goods movement not possible with mvmt type 201

    Hi Experts,
    When I am trying to post the movement of consumed Fuel & Distance by IFCU,the error comes 'Goods movement not possible with mvmt type 201'.
    Goods movement not possible with mvmt type 201
    Message no. M7096
    Diagnosis
    You have entered a movement type that has not been defined for this transaction/event.
    Procedure
    Choose another movement type.
    You can choose the movement type as follows:
    If you know the movement type, enter it directly in the Movement type field.
    Choose the movement type via the menu option Movement type.
    Choose the required movement type from the possible entries.
    If you do not find a suitable movement type, exit this function and choose a different goods movement from the Inventory Management menu.
    I cheked some of old post but not solved.I have also maintained IFCU in OMJJ for allowed transaction for 201 & 202 movement type but still not working.
    Please suggest me.

    Hi Maheswaran,
    Thanks for your reply.I have already configured,maintained the values and setting.
    Please check and update if any other solution.
    Regards,
    Baiju

  • FLEET Table, Possible Values For Field IS SI UNIT

    Dear experts,
    While doing analysis on fleet data I realized that for field IS_SI_UNIT (PM: Vehicle Data in SI Unit (e.g. Dimensions)) in table FLEET in two separate systems we have vehicle records set with different entries for this field.
    In one system vehicles are stored with value F: DB Unit set individually (new) 
    and in other one with value Y: DB Unit set through (new)
    Systems are SAP ECC 6.0
    Does anyone know what does it mean and what influence this has? In both systems vehicles are created by end users using standard PM creation transaction and those indicators are set in background while equipment is saved so there is not influence by end user.
    I could not find much information on SAP support portal about meaning behind possible values for field IS_SI_UNIT in table FLEET so was wondering if anyone knows more here?
    Thanks,
    Ivo

    Dear,
    There will not be any impact.Finally system will consider only SI units for fleet equipment consumption calculation.
    Kindly read note:366733 - Equipment/fleet: SI units in table FLEET and  372736 - Equipmt/vehicle:rounding error because of SI units
    It may help you.
    But in my system i can view only "Y"
    Regards,
    Pardhu

  • AMC cost need to be captured in maintenance order for fleet equipments

    Hi Guys,
    Our requirement is for fleet equipments we need to capture all the cost like,Material,AMC.....etc in one order.
    Normally we will create one mainteanance order for each equipment .When ever we post the consumption in Transaction:IFCU the cost of the fuel will be booked against the order.
    But for AMC through maintenance plan we are creating the order.So, cost will be booked in this but not in the common order which we have created for fleet equipment.
    How can i bring this AMC cost also in the maintenance order which we are creating for each fleet equipment?
    Regards
    Kumar

    Hi Maheswaran,
    Thxs for your inputs.But when i  create  the settlement profile with standing order as default object .This settlement profile will be assigned to the order type:PM03.This is will be default for this order type,but for preventive it should settle to the respective cost center.
    How this can be handled?
    Regards
    Kumar

  • MCIZ report  - Fleet management

    Hi Friends,
    In MCIZ, no data exists is coming for a fleet equipment after entering the fuel and distance in IFCU.
    the material is posted in the document for the consumption.
    But for another fleet equipment it is updating correctly in MCIZ.
    Could you please guide what i am missing?
    Regards,
    Alagesan M

    Solved.
    Measurement position  assigned  in  "Configure Measurement document update"

  • Cost centres

    Dear Forum,
    We have a requirement from FI team like How many cost center should require for PM?
    I said we need 2 cost center as below,
    Cost center for Work center (4300)
    Cost center for Services (4100)
    do we need anything other separate cost center? we are using vehicles under fleet equipment.
    FI team said they have to prepare individual cost center for all individual vehicles, if 100 vehicles in plant then they need to prepare 100 cost centers for only for vehicles.
    Apart from that they are asking how many else do we need?
    Kindly reply me,
    Thanks and Regards,
    Rajesh

    Dear PeteA/ Akilesh,
    Thanks for your comments.
    Yes, based on your views i was thinking the same, why they need to create every CC for vehicles, even though they just want to record the expenses incurred per vehicle.
    I hope this can be done with those 2 CC only. Their thinking is how to analyse individual vehicle expense?
    Kindly explain me, how can we analyse per vehicle analyse with only 2 CC? so that I can inform FI team accordingly.
    In other ways, as per their view we have assign each equipment with diff. CC in equipment master record?
    Regards,
    Rajesh

  • Multiple cycle plan order

    Dear Expert,
                          My clilent requirement for fleet equipments maintenance through both strategy(Timebased & Performance based) like that which earlier is first.we successfully started the multiple cycle plan for fleet equipment.but user want to know that how can we identify whose order came by which condition( timebase or performance order).while IP10 authorization can not give to client.
    So,Please suggest how can we overcome this problem.
    Regards,
    Akhilesh

    Hi
    User can check the measuringdocument aganist the equipemnt. It will give information that how much hour it has run.
    If this is not reached as specified the it will be from the time based.
    reagrds
    krish

  • Maint plan generating call  before cycle.

    Hi
    I created single strategy plan for a fleet equipment
    the cycle maintained is 250 mi   (At 250 miles i need a notification)
    The last counter reading is 200 mi only.
    But when i run IP30 by giving the maint plan only  it creating a notification.
    If i execute IP30 again also it is generating notification.
    Why it is creating notification before 250 mile is reached ?

    Hi,
    Annual Estimate should be maintained in case of even Measurement document is not created, but based on experience, if Maintenance Call object needs to be generated.
    Also Annual Estimate is optional field, you can leave blank. While creating Maintenance Plan by assigning that Measuring Point, it will you Information message as Annual Estimate has not been maintained. You can skip that message & go with scheduling based on Measurement Document.
    As you maintain 10000 in Annual Estimare, notification has been created immediately. Calculation would be 10000 for 365 days. So for example cycle value is 500, then 20 call objects would be created once in 18.25 days.
    Annual estimate should be realistic. Also for your requirement, it is not required.
    I hope its clear now.
    Regards,
    Maheswaran.
    Edited by: Maheswaran.K on Apr 28, 2011 12:38 PM

  • IE07 and error 'Maintain field selection for Fleet data in Equipment List'

    Hi all,
    When running transaction IE07 (multi-level equipment list) , I get the following error:  'Maintain field selection for Fleet data in Equipment List (Multilevel)'
    I can't see where is the missing configuration point.
    We have activated business function LOG_EAM_CI_3.
    Have anyone encountered this error before?
    Thanks,
    P.

    Hi Narasimhan
    Could you give more details ? where is located this setting?
    Thanks,
    P.

  • Equipment Asset synchronization

    Dear Experts,
    I have to manually assign the asset to equipment. I have done the following settings
    1) In "Specify Conditions for Synchronization of Master Data: against asset class
           a) i had given Equipment category
           b) Create Equipment :No synchronization
                Change Equipment : Direct synchronization after saving
           c) Create Asset :No synchronization
                Change Asset : Direct synchronization after saving
    2) In"Assign Master Data Fields of Assets and Equipment" I maintained cost center etc
    I want to create equipment & asset manually but want synchronization in master fields as defined in point no 2)
    At the time of creation if i choose different cost center other that what defined in asset system does not give error
    When I change cost center in asset system automatically change the cost center of equipment which is fine but it's vice-versa is not happening ie when i change cost center of equipment , cost center if asset does not change
    Pl help me out I want complete synchronization at the time of creation of equipment & later at the time of change the equipment or asset. I do not want to create asset or equipment automatically.
    Regards,
    Deependra Singh
    Edited by: DEEPENDRA SINGH CHAUHAN on Jun 22, 2011 12:18 PM

    Hi Ali,
    As sunil mentioned above, do the following setting in SPRO
    Plant Maintenance and Customer Service>> Master Data in Plant Maintenance and Customer Service>> Technical Objects>>Serial Number Management>>> Define Default Equipment Categories for Serial Numbers
    Here you define a central default equipment category (i.e; Fleet in your case) for the serial number management.
    Hope this will help you to resolve your issue.
    Regards,
    Ritesh

  • Standard Report on Fleet Specific Data

    Hi gurus,
    I was trying to use Tcode IH08 to view equipment data. but i cannot view fleet specific data such as license plate number, VIN, Fuel card No. Engine Type, Capacity Engine serial No., etc.
    How can i view those fields?
    Thank you very much!

    IE36 and IE37 should give you the list edit transaction for fleet equipments.
    Regards
    Narasimhan

  • Mapping of Equipment (Excavator) in SAP ETM

    Hello Experts,
    I have a senario where ihave to map a machine (Excavator) with the following specification in SAP ETM:
    1. WORKING HOURS PER SHIFT
    2. ACTUAL DIESEL CONSUMPTION PER SHIFT
    3. STANDERD DIESEL CONSUMPTION PER HOUR
    4. STANDERD DIESEL CONSUMPTION PER SHIFT
    5. DIFFERENCE IN DIESEL CONSUMPTION
    6. PLANED OUT PUT PER SHIFT
    7. ACTUAL OUTPUT ACHIEVED FOR SHIFT
    8. DIFFERENCE IN OUTPUT
    9. ENGINE OIL CHANGING DATA
    10.HYDRALIC OIL CHANGING DATA
    11.SPARES USED
    What i have done in SAP:
    1. Created a euipment by Name : Excavator.
    2. Assigned the same to a Plant.
    Also i am creating a Perfrmance Based Euipment Document for the Excavator to use it on a Project (Project Name: Construction of Road)
    With this i am able to track the actual work hours spent by the excavator on the road project.
    Now i am not knowing how to go about to key in or capture the above stated rest of details on equipment.
    Can any one throw me some light on how to proceed further.
    Regards,
    Sudarshan.

    Hello Maheswaran,
    Thanksfor your reply.
    1. WORKING HOURS PER SHIFT - Create Measuring Point either one or based on Shift, create the Measurement Document manually or through Production confirmation. So that, if you want to see based on Shift, based on Measuring point, report can be viewed. If you want to see all together, based on equipment, report can be viewed.
    Where should i create a Mesuring point ? Is it on the Euipment or an individual one? *
    2. ACTUAL DIESEL CONSUMPTION PER SHIFT - Create the Equipment as Fleet & Do IFCU activity (Material Consumption). If you create the Measuring Point based on shift, based on that Measurement document can be created.
    I have created a euipment "ZEXCAVATOR" and created a mesuring point "Diesel Consumption" and assigned a characteristic to it and also was trying to creat a mesuring document but i got a greyed out screen where i was unable to input anyting.*
    6. PLANED OUT PUT PER SHIFT - What kind of information to be captured?
    Here we want to capture the planned out i.e. If excavator is working in a shift, we plan that in 8 hrs , the excavator has to excavate 100 cubic meters of earth. *
    7. ACTUAL OUTPUT ACHIEVED FOR SHIFT - What kind of information to be captured?
    Here we want to capture , the actual output of excavator, like we used excavator for one shift and the out put is only 50 cubic meters *
    8. DIFFERENCE IN OUTPUT - What kind of information to be captured?
    Difference of 7 and 8 gives this *
    Regards,
    Sudarshan.

Maybe you are looking for