U0093Merge InfoObject Association Type(0TCTASCTYPE)9%u0094 Any help in understand?

Hi,
I have been having problems collecting 0BWTCT_STA to create BW statistics. I decided to collect the InfoArea and Infocatalogue first, then later collect the infoCubes.
After collecting the InfoArea/Infocatalogue, while installing I got this message, a message popped us:
Merge InfoObject Association Type (0TCTASCTYPE) 9%
and a check box:
With master data etc.
My options were Transfer Selections or Transfer all without dialog
What does this mean? This is the first time I am seeing something like.
What is the implication of each of these options?
There were 2 check boxes, one for Selection and the other for Content Version, what is the significance of checking each of these? The default had a check on the Selection but not Content Version
Thanks

Hi,
So, for the 2 check boxes, if my goal is to only transfer objects which do not exist in active versions, which one do I select?
These were the options
With Master Data Selection check/Uncheck Content Version check/Uncheck
You can only check one of them that is what I found as I try.
Also, after this selection, I needed to choose between Transfer Selections or Transfer all without dialogue
If my goal is NOT to overwrite any active object, which of these do I choose?
Thanks

Similar Messages

Any help on this Message (Yellow) while installing BW Statistics?

Hi,
Following the link: http://help.sap.com/saphelp_nw04/helpdata/en/8c/131e3b9f10b904e10000000a114084/content.htm
to install BI Statistics (0BWTCT_STA).
In rsa1, Bi Content, InfoArea, I collected 0BWTCT_STA to the right pane, and followed the Procedure in the link by choosing grouping function for necessary objects only
the next step is to install. (Procedure 1 b. in the link).
On completing the Procedure step 1 b in the link, I got the MESSAGE (Yellow) below. Any help in understanding the consequences? Can I proceed with the instructions to install or this will cause some problems?
Thanks
MESSAGE (Yellow) below
Installation of: InfoObject (IOBJ)
1. Transfer/Merge of the Content Version (Object Type InfoObject )
Object InfoObject 0FLAG: Merge with the Content Version
   InfoObject 0FLAG: Application component transferred from Content version
   InfoObject 0FLAG: InfoArea transferred from the Content version
Object InfoObject 0TCTAGGRST: Merge with the Content Version
   InfoObject 0TCTAGGRST: active and revised version are different
   InfoObject 0TCTAGGRST: InfoArea transferred from the Content version
Object InfoObject 0TCTASCTYPE: Merge with the Content Version
   InfoObject 0TCTASCTYPE: InfoArea transferred from the Content version
Object InfoObject 0TCTAUTH: Merge with the Content Version
   InfoObject 0TCTAUTH: Application component 0BWTCT transferred from Content version
   InfoObject 0TCTAUTH: InfoArea 0TCA transferred from the Content version
2. Activation of Objects with Type InfoObject
Checking Objects with Type InfoObject
   Checking InfoObject 0TCTAUTH
      Characteristic 0TCTAUTH cannot be a master data InfoSource
      Characteristic 0TCTAUTH is not an InfoProvider; InfoArea / nav. attr. Deleted
   Checking InfoObject 0TCTBWOBJCT
      Char.0TCTBWOBJCT is longer than 000040 (authorizations only in internal presentation)
   Checking InfoObject 0TCTEMAIL
      Characteristic 0TCTEMAIL: Lower case makes selection of char. values difficult
   Checking InfoObject 0TCTUSERNM
      Characteristic 0TCTUSERNM: Attribute 0ORGUNIT was deleted --> conversion
      Characteristic 0TCTUSERNM: Navigation attribute 0TCTUSERNM__0ORGUNIT was deleted --> conve
   Checking InfoObject 0TCTWHMACT
      Characteristic 0TCTWHMACT: Enter description of navigation attribute 0TCTSTATEVT
      Charateristic 0TCTWHMACT: Navigation attribute 0TCTWHMACT__0TCTSTATEVT switched on (-> N.B

Hi,
    Its just a warning.The particular bi content objects are installed.You can proceed with it.Check all ur Inof cubes and Infoobjects and Process chains etc are installed.thn go 2 rspc and start executing the process chains
please assign points if helpful
Regards
Sreekanth

My Macbook Pro keyboard AND USB keyboard will not work. However, the trackpad and USB mouse will work. Any help?

My Macbook Pro keyboard and USB keyboard will not work. However, the trackpad and USB mouse will work. Any help?
This is quite frustrating, since it randomly occured as I was browsing the web. It seemed to happen out of nowhere. I cannot login to my user account because I cannot type my password.
Any help will be appreciated.
-Matt

If you have another Mac, boot the non-working one into Target Disk Mode (holding down "T" at startup). Hook up the two Macs via a Firewire cable. The non-working one will mount on the other Mac as an external Firewire HD.
Next, download the 10.5.6 Combo update from here:
http://www.apple.com/downloads/macosx/apple/macosx_updates/macosx1056comboupdate .html
Run it. When it asks you for a destination, choose the other Mac that was mounted via Firewire. When it's done, unmount the computer and restart it. The keyboard and mouse should work now.

Copy the attribute as well the associated type from the standard to your enhanced view.?

We are doing CRM Upgrade to Ehp3 and i am working with TC:WCF_CC
Please guide me how to open standard view in parallel in component workbench?
to add copy the attribute as well the associated type from the
standard to your enhanced view.?
Please advice

Hi,
The only option i see is writing a BDC for a Mass Change or through Catt or E-Catt procedure, you can define any no. of fields there to copy and then you need to maintain the data in Excel file correctly, otherwise Ecatt is not going to upload the data.
Hope this helps.
Thanks
Aktar

My iCal keeps popping up saying 'iCal can't log into your google account because your password key be incorrect', and no matter what I try or type in it just keeps popping up every 20 minutes or so. Any help?

Hi, I've had my Air for a few days now, and since setting up my iCloud and linking with my gmail account, my iCal has started constatnly bugging my about a password entered incorrectly, it says, 'The password may hev been enetered incorrectly. Reenter the password for account 'Google' on the CalDAV server "calender.google.com".' Whatever I type in is wrong, and I don't have that many options for passwords so I know I'm not entering it incorrectly if it's one of mine, and every time I close it, it pops back up 20 minutes later with the same problem. Any help would be great, Thanks

I ran into the issue about 3 months ago and resetting my password fixed the issue (no pop-ups since the reset). As someone who supports about 25,000 users who are on Google Apps for Education I can comfortably say that this appears to be a pretty common fix. About once a week we get a call from a user who gets the username/password pop-up with correct credentials, when I encountered it myself I knew something had to be up.
Give the reset a try, also give it a few minutes (3 to 5 mins) before entering the new password into iCal.

Since I upgraded to os 5.1 for my iPhone I can no longer type in reminders. Any suggestions how to get around having to use siri for reminders?

since I upgraded to os 5.1 for my iPhone I can no longer type in reminders. Any suggestions how to get around having to use siri for reminders?

Unfortunately, I have a very similar problem. Since I upgraded to os 5.1 on my new iPhone 4S the reminders screen will not add new reminders or scroll up and down. What's more strange is the screen will still scroll side to side allowing access to the Completed list, and both the Completed list and Date functions work normally so this must be an upgrades glitch.

HT1752 I have an old iMac (the rounded type with monitor). I need a new keyboard and mouse. Will any work? thanks for any help!

I have an old iMac for 2002....it's the rounded type that has an attached monitor. The software is way outdated (OS X 10) and I only really use now to access 3,000 plus songs and old video of the family. Both the keyboard and mouse no longer work. Am I able to use any keyboard/mouse and plug in using USB? Thanks for any help!

Most any USB mouse or keyboard should work. Borrow one if you can and just plug it in.
If the USB circuits are at fault then you can access via Firewire Target Mode with another Mac in order to get at the files.
http://support.apple.com/kb/HT1661
Another alternative would be to remove the hard drive and use a USB adapter to access it as an external drive.
http://eshop.macsales.com/item/NewerTech/U3NVSPATA/

The document type does not match any of the given schemas

Hi,
I have created an envelope schema.To precisely process inbound envelope documents,in the xml disassembler component i have used the Documentspec and envelopespec properties.
in the properties i have the the schema name,Assemblyname
but i have got the error like The document type does not match any of the given schemas.
I have verified the schemas have deployed properly.
can you help me on this?

Hi Sujith,
As pointed out by Johns lot's of thing can cause this. You have to analyze lot of things, but this kind of error indicates that the message type that you are debatching is not deployed. For Example :
If you are debatching on Order than Order schema should be deployed in the admin console.
One more point that you need not to specifiy Documentspec and envelopespec properties until and unless there are multiple schema's of same message type deployed in different assembly. The dissasembler component will automaticaly disassemble the messages
just looking after the body XPATH.
Regards,
Rahul Madaan

I have updated my ipad yestarday sicne then i am not able to open any application on my ipad2. some of the application able to open in the page and not able to open all the applications in the second page. Does any one got this type of issue? any sugg?

i have updated my ipad yestarday sicne then i am not able to open any application on my ipad2. some of the application able to open in the page and not able to open all the applications in the second page. Does any one got this type of issue? any suggestions?

This problem has been reported a few times. The solution is to install any new App say a free one. This seems to fix whatever has gone wrong.

Running Illustrator on CS4. Would like to insert photo image into body of type. Would appreciate any guidance. Thank you

Running Illustrator on CS4. Would like to insert photo image into body of type. Would appreciate any guidance. Thank you

Use a clipping mask.
Illustrator Help | Clipping masks

I can't type @ on iPhone to send iMessages, any help?

I can't type @ on iPhone to send iMessages, any help?

If you're typing in the "To" field, look at the very bottom of the keyboard, the @ key is there. Otherwise it's in the numeric keypad underneath the number 9.

How to specify Associated Type ?

Hi,
In the Form Interface in the tables section. i've mentioned the parameter name as itab and type as table and Associated type as spfli. But, it's giving an error saying - SPFLI Flat types may only be referenced using LIKE for table parameters. How can i correct this error. My requirement is to print the spfli table using smart forms..
Thanks in Advance..

Hi
Use LIKE instead of TYPE.
If you want to use TYPE, you need to create a TABLE TYPE based on SPFLI by SE11
Max

InDesign crashing when using type tool - any help?

Hi,
Ive looked for this problem in the threads here but couldnt find the solution, only similar problems.
I use InDesign on OSX and it works fine until I use the type tool - in new or old documents. Then it crashes.
I tried reinstalling the program and uninstalling, also uninstalling the last fonts added to the system to no success.
Any help would be much appreciated.

Hi Steve,
Its CC and it was working perfectly.
I was on OSX Mavericks when I last edited documents.
I've updated the OS to Yosemite a few days ago. Illustrator and Photoshop worked perfectly on Yosemite.
I also installed a few fonts, which worked on Illustrator, if that's of any help.
I've uninstalled all the recent additions and tried using InDesign afterwards, but its still crashing.
I can post the error log I receive.

I was trying to clean up my desktop, and inadvertently switched all my icons on my desktop. When I click on file a, file b opens and so on, regardless of the extension type. Is there any way to fix this?

I was trying to clean up my desktop, and inadvertently switched all my icons on my desktop. When I click on file a, file b opens and so on, regardless of the extension type. Is there any way to fix this?

I use
Chronosync (http://www.econtechnologies.com/pages/cs/chrono_overview.html)
and
Dropbox (https://www.dropbox.com/)
Both work very well. The former I use for manual, one-way synchroniziation of (nearly) entire systems. The latter for automatic syncing of very active directories through local and shared online storage.

Itunes delays ONLY when playing mp3's. Also it delays when I move any file type into a playlist. Help! I'm about to go back to Windows Media Player!

Hi friends! Like I said Itunes delays ONLY when playing mp3's. Also it delays when I move any file type into a playlist.
Here's what I've done so far;
I 've checked my external hardrive (by playing it off my internal instead), I've tried reinstalling (although it wasn't an uninstall), I've tried clicking on all the neccesary boxes (let itunes organize files, copy files, consolidate, and reorganize), I've tried different sound cards, I've tried moving files quickly (as some have said this works). I'm not sure what's wrong. I have 7000 songs.
Any help would be great!

Have you tried installing Media Manager on another computer and streaming the songs from there?
How about smaller playlists? See the same problem?
Kevin
Verizon Telecom
Fiber Solution Center
Notice: Content posted by Verizon employees is meant to be informational and does not supercede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or Plan.

U0093Merge InfoObject Association Type(0TCTASCTYPE)9%u0094 Any help in understand?

Similar Messages

Maybe you are looking for