UCCX 7 Scripting Question - secret option to go straight to CSQ?

Hi guys,
I have a simple script that plays a number of individual greeting/ notification prompts (welcome, call may be recorded etc) before sending the caller to a CSQ or queueing if none available.
There are no menu options played to callers and hence no menu step in the script but the customer wants the option for people who regularly call in to their call centre to be able to press a digit so they can bypass the greetings ang go straight to the CSQ.
What is the best way to achieve this and do i need to use a menu step to achieve this functionality??
Cheers,
G

Well there are probably a few ways to go about this. A Menu step is certainly a valid way to do it. You would need to set the Retries parameter to 0 to prevent the prompt from saying "Are you still there?" and repeating. Also ensure that Barge In is set to True so the caller can press the digit any time during the prompt.
Beyond the Menu step itself you can likely just slap a label on your Select Resource step and then add a Goto in the success branch of your Menu step.

Similar Messages

  • UCCX Scripting question

    We have a requirement from our client running UCCX version 8.5 to
    route calls within a certain time period to the same agent that dealt with the last call
    from that specific calling number.  I recognise that this is probably a fairly complex scripting issue,
    but it's very pressing nonetheless, and any helpful pointers I could get from an expert
    would be most gratefully received.  We are working on a project which will depend on this
    feature, and I don't know how to achieve it.  Thanks in advance

    Here is everything you need to make this work.  You are very close to the solution.
    Also, I will be typing this out as opposed to uploading a script for two reasons:
    So that the contents of the script can be searched for
    I am on UCCX 8.5 and I realize that if I upload a script, everyone not on UCCX 8.5 will not be able to open it
    Script 1 - Trigger 1000
    Variables
    Session this_session = nullString session_data = ""
    Script
    StartAccept(--Triggering Contact--)/* The Get Contact Info step grabs a reference to the Session for the Triggering Contact */this_session = Get Contact Info (--Triggering Contact--, Session)Set session_data = "Yippee-ki-yay"/* In the Set Session Info step, you use the context tab to store the session data. *//* The name is a quoted string you make up. I.e., "the_session_data" or "my_secret" *//* For me, I will use the same name as my variable in order to keep it consistent: "session_data" */ /* The value is the variable in your script which holds the value you wish to store.  For me: session_data */Set Session Info (this_session)Call Redirect (--Triggering Contact--, "2000")     Successful     Busy     Invalid     UnsuccessfulEnd
    Script 2 - Trigger 2000
    Variables
    Session this_session = nullString session_data = ""
    Script
    StartAccept(--Triggering Contact--)/* The Get Contact Info step grabs a reference to the Session for the Triggering Contact *//* In this example scenario, this will be the exact same session as in Script 1. *//* That is because the session is attached to the contact, and not to the script *//* If the caller had hung up, and called script 2 directly, then this would not be the same session *//* In that case, you would have had to create a session mapping in script 1, and then use the Get Session step *//* in this script to try and retrieve a reference to an existing session.  Session only last for 30 minutes by default. */this_session = Get Contact Info (--Triggering Contact--, Session)/* In the Get Sessoin Info step, you use the context tab to retrieve the session data *//* Just like the Set Session Info step, you need to specify the name, and which variable you will hold the value in *//* What is neat here is, the step knows about the names you've typed in previously, and makes them available from a drop down list. *//* However, if your's in not shown, don't panic, just type the name in again, just as you did with the Set Session Info step. */session_data = Get Session Info (this_session, "session_data")/* If the session_data variable (or any variables you use in the Get Session Info step) return null after the Get Session Info step, *//* That means that they were not set (not found) within the session object. */If (session_data != null && session_data.trim() != "")     True          /* We now hold a good value for session_data from the first script.  Yay!  We did it! */     False          /* Oops, something went wrong and now we're left standing in the rain all alone. */End
    Anthony Holloway
    Please use the star ratings to help drive great content to the top of searches.

  • UCCX Scripting Question- combining multiple scripts into one -Transfers/subflows

    I need to separate an existing call center into two because their hours are different and the main lines have separate DIDs.
    The two separate call centers must have the same agents and same queues, including Agent Personal Queues as Menu options. Callers need to be able to choose to go to either the Main Queues, or listen to another menu that allows them to select and option to be sent to a personal queue
    I have three separate scripts, CCA, CCB, and Agent Personal Queue, same queues, same switch (calledNumber) with the same trigger(DNs) and I was about to create three separate applications, but then realized the triggers can only point to one application
    What is the best way to set this up?
    Option A
    Script A (CCA )- Has all the "Switch-(Called Number) with all the trigger
    Script B -Has no Switch, just Transfer to extension(and then the call goes out to the trigger)
    Script C - is the Personal Queue Script
    Option B
    Combine all three scripts into one-separate the TOD logic, have the same queues and menus beneath each call center and Personal Queue tree, is going to be a really large file

    Hello-
    I would likely use a single script for your application.  That being said looking at your screenshot it looks like your script could use some clean up and consolidation.
    DJ

  • UCCX Script Question

    Is is possible to change the calling name prior to transfering the call to an extension.  We are in the process of changing our script to send some calls to non agents and we could like for them to be able determine from the Calling Name what the call is for.
    Thanks,
    Joe

    Hi
    Not sure if you can do it via scripting (anyone?) but the other solution would be to set up a CTI Route Point with a recognizable name (e.g. 'Department 1'). Forward that to the hunt pilot, and then send your calls to the CTI RP.
    Call should then show up as 'Forward for Department 1'.
    Regards
    Aaron
    Please rate helpful posts...

  • UCCX Script Replacement with Queued Calls

    UCCX script question:
    If there are calls queued, and the script is replaced with an edited script, will the original script maintain the queued calls, or what happens with them?

    Existing calls are still following the script they arrived to, all new calls will follow the updated script.

  • UCCX Script 8.5: How to create a script that plays exchange rate option

    Hi
    Has anyone created a UCCX script which has the option to play exchange rate, if yes can you tell me how to do this or provide a sample script

    Hi
    The text is available on a website.
    This an example of the text
    Current Rates
    Jamaican Dollar Save Smart (J$)
    Last Updated: Oct 09, 2012
    JA$ SaveSmart Account Interest rate is at : 3.66%
    United States Dollar Save Smart (US$)
    Last Updated: Oct 09, 2012
    US$ SaveSmart Account Interest Rate is at: 1.72%

  • UCCX Scripting issue

    Hello,
    I'm desiging a UCCX Script ,  If  No agents Logged In -> Yes, There will be a prompt  -> End
    If  No agents Logged In -> No, There will be two prompts
    Prompt1: If you are calling for CC issue, press 1
    Prompt2: If you have TS question, press 2
    If caller press either 1 or  2  there will be a prompt : Please note call may be monitored for QA -> then call will be in the Queue to agents
    If caller won't press neither 1 nor 2 call should move to Receptionist Ready status check and if receptionist avalable, there will be a prompt :If you have other inquiries ,press 0 and then call will be in Queue to Receptionist.
    If Receptionist is not avaialable, there will be  a prompt : Thank you for calling please call back at a later time -> End
    Hope you understood, If caller didnt press either 1 or 2 call should jump to Receptionist ready status check .
    How can I accomplish this within the script  after playing two prompts if No agents Logged In -> No?
    Can any body suggest me which step to be used on this occation?
    If would appreciate if you can explain me in details.

    You will need at minimum 1 variable: an Integer and named something like "logged_in_agents"
    You will need at minimum 3 steps: a Get Reporting Stats step, an If step, and a Menu Step.
    Looks something like this:
    Variables
    int logged_in_agents = 0
    Script
    ...your beginning script steps are omitted...logged_in_agents = Get Reporting Statistics (Logged In Agents in "HelpDesk_CSQ")if (logged_in_agents == 0)  true    menu      option 1    ...whatever menu options you have...  false    menu      option 1    ...whatver other menu options you have...

  • UCCX Scripting - Open/Close time of day is different on some days

    All,
    I currently have a simple UCCX script with a DOW and TOD variable set, but need to make an adjustment to accommodate a new schedule for a call center queue.  My DOW is Monday - Friday, and TOD is set to 8am-5pm.  I need to make a change to where say Wednesday is set to not close the queue until 10pm.  How do I make that happen?
    This is the way it shows in the editor:
    DOW: Monday-Friday
     +open:
      ++8am-5pm:
       +++Goto yadayada
      ++TheRest
     +Closed
    If I need Wednesday's queue to stay open between the hours of 8am and 10pm, what logic do I need to put in?  I'm thinking I'll have to add an IF Statement, but not sure where to start.  Any ideas?

    I was able to figure this out.  Below is what I did:
    Created two new Day of Week options and selected the corresponding days.  Under each, I moved the Time of Day statement and assigned the time ranges, then selected the goto statement and assigned it as needed per my script.  
    This should provide the logic I was needed.  

  • UCCX script editor not working

    1-The loading bar down of the screen always loading and never finishes.Please  take a look to the attached picture.
    2-When i go to the uccx and want to change the server from hostname to ip address,i always get update failed.
    I am so new in uccx,help is appreciated.
    Thanks in advance.

    Hello,
    You have come to the right place to ask questions on UCCX.
    Please take some time to read through the product manuals, as they are full of good information and will answer most of your questions.
    UCCX Documentation Home Page
    http://www.cisco.com/en/US/customer/products/sw/custcosw/ps1846/tsd_products_support_series_home.html
    On to your two questions:
    1.  This is not a loading bar.  This bar is completely useless, and all it's telling you is how much memory the Editor has available to it in order to process things.  The button to the right is simply a "garbage collector" which will attempt to free up any abandoned memory, but mostly it just sits there looking pretty.  You really don't need to bother with either of these too status bar items, and can ignore them.
    Source: UCCX Scripting Volume 1 - Getting Started with Scripts
    2. It's been about two years since I've completed an install of UCCX, and therefore don't have this information fresh in my head.  I did spend  few minutes trying to find documentation on the topic, but to no avail.  I was only really able to read the Help page for that specific page (Help > For This Page), however, it didn't make a big deal about changing the value.  It simply says, change it and then click Save.
    Could you post the exact error message you are receiving?  Also, what is your intention with changing the hostname to IP?  Unlike CUCM where you may want to remove DNS dependency on the phones to communicate with the server, UCCX clients use the IP address regardless.  So perhaps it's not a necessary step?
    Anthony Holloway
    Please use the star ratings to help drive great content to the top of searches.

  • UCCX script and abandoned calls

    Hi Guys
    I got question about that UCCX script and abandoned calls , so currently we had 4 different script for  support the call follow .
    So the Main script is just AA let the people select menu 1 , 2 ,3 then go to different queue , after select 1 (for example) then call-direct to second script trigger number and coming into the queue .
    Unfortunately , the system counter the action to be an Abandoned call      , I already open the case about this issue and the TAC did not found any configure issue on UCCX , from the log we can seem all the REDIRECT,lrd=5000 is abandoned call .
    23811205: Apr 28 13:01:44.257 GMT+800 %MIVR-SS_TEL-7-UNK:Call.received() JTAPICallContact[id=37148,implId=151183/1,state=STATE_RECEIVED_IDX,inbound=true,App name=APP0,task=null,session=null,seq num=-1,cn=5000,dn=5000,cgn=0405554590,ani=null,dnis=null,clid=null,atype=DIRECT,lrd=null,ocn=5000,route=RP[num=5000],TP=null
    23811420: Apr 28 13:02:00.491 GMT+800 %MIVR-SS_TEL-7-UNK:Call.transferring(5030) JTAPICallContact[id=37148,implId=151183/1,state=STATE_ANSWERED_IDX,inbound=true,App name=APP0,task=48000040709,session=36000027315,seq num=0,cn=5000,dn=5000,cgn=0405554590,ani=null,dnis=null,clid=null,atype=DIRECT,lrd=null,ocn=5000,route=RP[num=5000],TP=5007]
    23811424: Apr 28 13:02:00.491 GMT+800 %MIVR-SS_TEL-7-UNK:Call.abandoned() - transferring JTAPICallContact[id=37148,implId=151183/1,state=STATE_ANSWERED_IDX,inbound=true,App name=APP0,task=48000040709,session=36000027315,seq num=0,cn=5000,dn=5000,cgn=0405554590,ani=null,dnis=null,clid=null,atype=DIRECT,lrd=null,ocn=5000,route=RP[num=5000],TP=5007]
    23818414: Apr 28 13:09:46.095 GMT+800 %MIVR-SS_TEL-7-UNK:Call.transferring(239) JTAPICallContact[id=37149,implId=151183/1,state=STATE_ANSWERED_IDX,inbound=true,App name=app2_Admin,task=48000040710,session=null,seq num=-1,cn=5030,dn=5030,cgn=0405554590,ani=null,dnis=null,clid=null,atype=REDIRECT,lrd=5000,ocn=5000,route=RP[num=5030],TP=5034]
    23818421: Apr 28 13:09:46.095 GMT+800 %MIVR-SS_TEL-7-UNK:Call.abandoned() - transferring JTAPICallContact[id=37149,implId=151183/1,state=STATE_ANSWERED_IDX,inbound=true,App name=app2_Admin,task=48000040710,session=null,seq num=-1,cn=5030,dn=5030,cgn=0405554590,ani=null,dnis=null,clid=null,atype=REDIRECT,lrd=5000,ocn=5000,route=RP[num=5030],TP=5034]
    Please give some advice about that and I am look forward to heard from you guys soon .
    Thanks

    Hi Jon
    I was tested "Set Call Contact Info step to mark the call as handled" last night , but not working .
    so in the get call contact info properties , I was used  last Redirect number  to nest trigger number .
    but not working .
    so have got any idea about that ?
    thanks

  • How to setup a whisper prompt in UCCX Script?

    Guys
    I need some help here.
    We have a cisco UCCX setup which was designed and implemented by a vendor. They had the script written. I want to modify that to have a whisper prompt for the agents to hear something before they start their talk.
    Is there something that anyone can guide me to tell me what actually has to be done on a script to input this whisper message. I have a prompt for that. But don't know where and what to start with.
    Any help is much appreciated.

    @Gergely : For your first question, the answer it yes. The agent should hear that recording before he does go the customer call.
    But the second note what you sent, I don't think that is correct. Because UCCX script supports that. I have pasted a sample below which a whisper prompt works in one of our UCCX script. See below.
    Correct me If I am wrong.

  • Webservice call on UCCX Script

    Hi,
    Anybody has idea how to call web service on UCCX script editor.
    I read i have to built custom java code and import it into UCCX. Can anybody support how to use it.

    Hi,
    that's one way but there are several other options as well:
    - using embedded Java code in your script (no custom file),
    - creating the necessary Java classes with wsimport and referencing them in the script.
    Please note you need at least IP IVR or UCCX Premium to make this work.
    You should probably read the configuration guide about administering custom classes.
    G.

  • Working with TimeZone variables in UCCx script

    Hi Team
    I'm wondering if you guys could help me to find out the best way to work with TZ variables in UCCx script.
    Because of different countries customer has a branches, I need to setup different TimeZones for each country handled by the same centralized UCCx.
    In this post they use Java to work with TZ, however, but I prefer another way to work with TZ variables:
    https://supportforums.cisco.com/discussion/11851751/how-make-uccx-holiday-script-timezone-aware
    My idea is to work with Time Zone variables in the script, so what I did was to create different TZ variables and each one of the them assigned the proper timezone based on the country, so depending of the Trigger involved (DNIS), I can find witch country this call came from and give the right timezone.
    The problem I have is that at the time I want to add or subtract two variables of TZ, I got an error because of the syntax. I've been trying different options, but until now, no luck.
    Would you mind you guys who had been working on this let me know what is the right syntax to add or subtract TimeZone variables un UCCx?
    Thanking you in advance
    Martin

    Hi
    I've been working on TZ's recently... see this post:
    https://supportforums.cisco.com/discussion/12474756/how-check-daylight-saving-within-uccx-script
    My approach in the scripts was that basically I allow the department to set their opening hours in the timezone of their choice.
    They have a management web page served from CCX that accepts start/end times each day, and a timezone. That all gets stored in XML.
    In the script, based on that information I get the current time in whatever timezone is set, and compare that to the XML open/close times.
    Similarly for holidays, I get the current date/time in the holiday TZ and compare the holidays to that.
    Aaron

  • Query AD from a UCCX script

    Does anyone know how to query Active Directory from a UCCX script?  Looking to pull the caller's email field from the ANI.

    Hi
    You can do this, but it's not so simple. Two options:
    1) Create a custom java class to read LDAP and return the info you require
    2) Implement a middleware web server that you can call from UCCX, that would take ANI as a parameter and return the email address.
    I've done 1) before, or something very similar...
    Aaron

  • Order status using UCCX scripting

    I have Oracle DB which contain information about customer order such as if order has been shipped, when has been shipped,and so on. We do not want to query directly against the DB, and as far as I know Oracle has XML DB web services. If we turn that on, and have a report in xml that give me all information I needed. How do I use UCCX scripting to access these data, and read it back to customer when they call.
    I am using UCCX 8.5 premium.

    Hi,
    I see.
    This way: I certainly need the WSDL. It's basically the contract between the SOAP server and the SOAP client, the description of the protocol they are going to use. Its a file or a URL, in both cases, it's an XML document.
    SOAP might be a bit tricky, but I can help you with that. It's basically the SOAP client (in our case, the UCCX server) sending an XML over HTTP to the SOAP server, and expecting some result, which is usually an XML document, too.
    There are several approaches of enabling a UCCX script to perform SOAP commmunication, and I have created several documents about it:
    https://supportforums.cisco.com/document/97736/uccx-8x-really-simple-soap-client-no-custom-jar
    https://supportforums.cisco.com/document/112616/uccx-oop-soap-client-1-custom-jar-using-jax-ws
    Or, there's a recent thread about a similar integration:
    https://supportforums.cisco.com/discussion/12240436/uccx-soap-request
    Please ask the administrator of your Oracle DB about the WSDL, download it, post it to here.
    About the second integration option: I was thinking about a Grails proxy app - do you have a Tomcat or other Java application server in your environment we could use? 
    G.

Maybe you are looking for