Uix 2.2.8 multi monitor related bug

Hi,
I have a multi monitor system, on the seconnd screen, there is the browser , showing a page which has a Date Picker and a LOV. If I click on one of the icons, the window opens, and then all of a sudden jumps to the first screen with IE, with Mozilla it already opens on the first one. Same screen would be nice though.
Bye Jan

Hello Jan,
In the UIX javascript code the newly opened window's coordinates are checked to make sure it is not partially off the screen. If so, the window's coordinates are adjusted to put it on the screen.
I think there is a bug in IE which doesn't treat the multi-monitors as a single monitor, or something like that. Unfortunately, I doubt we can do anything about this.
Are you saying it works in Mozilla, correct?
Thanks,
Jeanne

Similar Messages

Windows 10 hiding taskbar in multi-monitors setup bug.

This bug persists since windows 8.1 and is already discussed
here, but it wasn't fixed in approx. half a year :( So, I'm gonna give it a try here.
Here's the screenshot of it in Windows 10.
Well, the bug is with incorrectly disappearing taskbar - taskbar "hides" not in the bottom of the screen, but "taskbar height pixels" higher (see the images in onedrive folder below). It hides in such a way only when you go to start screen
with visible taskbar, wait until it disappears and return to desktop in any way (by pressing the win key, by selecting desktop on startscreen or by clicking the windows logo in the lower left corner); this bug only appears with two monitors setup and
heavily depends on monitors position - the secondary monitor bottom should be below primary monitor bottom (I mean not physical location, of course, but monitors' relative location in "Screen resolution" menu). The bug didn't appear before Update
1; I can't confirm whether it is reproduceable only on my PC at the moment.
I have reproduced the bug on windows 8.1 U1 across several computers with 100% success rate: two macbooks pro retina, lenovo laptop, two desktops (on one of them I reproduced the bug via teamviewer). I've reproduced it today in VMWare with windows 10 Technical
Preview.
This bug is really annoying - when it happens, you need "to cast some magic" - move the mouse to the bottom of the screen, activate/deactivate several applications, etc. in order for taskbar to reappear properly, let alone the fact that it looks
unaesthetic.
Skydrive folder with bug screenshot
Screen recording of the bug
Step-by-step guide with screenshots

Yeah, I already did it. I just wanted to open it here, because I've been trying to contact MS about this bug for almost half a year with no success, so I'm just trying to bring their attention to this thing in all ways possible. I could reproduce this bug
on all the systems I've tried so far, and I've managed to reproduce it even on VMWare in newly-installed windows 10 TP in a single try.
@rgggg
I can't understand what do you mean by weakness in graphics. It's a 100% functionality bug. Also, of course, I have nothing to do except reporting some non-existent bugs, making fake screenshots etc. I can't understand what do you mean about "intermediate
servers", and it's almost impossible to change every Windows iso distributive I've downloaded in such a way that this bug will appear there :D
C:\Users\Sfairat>fciv -both D:\Downloads\WindowsTechnicalPreview-x64-EN-US.iso
// File Checksum Integrity Verifier version 2.05.
MD5 SHA-1
9005dce26734bcde7f912c2c51ab1127 eb75a3d3c0f621f175b75dc65db036d0e00eac43 d:\dow
nloads\windowstechnicalpreview-x64-en-us.iso

Multi-monitor application switching bug in Windows 8.1

In the latest 8.1 update, we got some better features here and there, but using metro apps seem to break multi-monitor setups.
In certain circumstances, the cursor will get "caught" between screen edges, as if the metro app-switcher or charms bar were open.
There's no one way to reproduce this bug, sometimes it happens and sometimes it doesn't, but it usually starts to happen when switching from a metro app to the desktop on the main display via the top-left hotcorner.
This may also happen in many other circumstances involving metro apps or the hotcorners or anything like that. I have not had a problem involving the start screen so far. Getting rid of it (temporarily) is just as finicky as reproducing the issue. I really
have no idea what makes it go away, but switching back and forth between apps using different methods (hotcorners, taskbar, metro minimize/close buttons) seems to get rid of it until you interact with apps again.
I have an AMD r9 280x and 2 1080p displays. I am not using eyefinity. I am running Win 8.1 Pro updated to the latest 8.1 update where there are metro apps on the taskbar.
Needless to say, this is very annoying. If I can't smoothly move my mouse cursor between screens, it really interferes with a dual/multi screen setup. With all the people with multiple screens, I'd expect more people to have run across this problem, so if
you need more information to identify whether this is a software/OS issue, let me know.

In certain circumstances, the cursor will get "caught" between screen edges, as if the metro app-switcher or charms bar were open.
That's not a bug. It's a feature. Unfortunately there is no GUI support for it. And evidently there needs to be a training dialog, in the same way that there is one for Flicks. Search for "Escape Velocity"...
http://answers.microsoft.com/en-us/windows/forum/windows8_1-windows_update/issue-with-dual-monitors-after-windows-81-update/30431433-32a7-48e7-853e-f6f391f5fa3e?msgId=2139704d-c2d2-44e6-b466-452769e7fdbf
That's strange. They called it Escape speed? Implying direction doesn't matter? <eg>
Robert Aldwinckle

Multi-Monitor PSE 9 Corrupt Display

Multi-Monitor PSE 9 Corrupt Display
Evening all -
First post here at PS Gurus. I hope that you guys can lend your expertise in pinning down an issue that I am having and have also had on other PS versions. I am running
Windows 7 (64 bit) Ultimate
2600k / 8 gb ram / 256 Samsung SSD / 460 GTX 1GB
Matrox Triplehead 2 Go with x3 22" monitors (resolution 5040 x1050)
A fresh install of the trial version of PSE 9 is yielding corrupt main toolbar and options bar (for each tool selected). The application is expanding full screen on all three monitors just fine but the toolbar are corrupt - partly transparent / party compressed to the left. No matter what I have done in terms of resizing the application window the results are the same or get worse.
On another computer I installed PS CS5 (also under win7 64 bit environment) and I was having the same issue. However, at the time I thought the install was bad in some shape or form so I dropped the issue.
I am now considering PSE 9 but see that Win7 + Matrox just isn't working correctly with this combination of hardware / software components.
Has anyone see this issue or know of a potential fix? I have read a couple of threads on the net with similar issues but I don't see any resolution. Your help is greatly appreciated.
Thanks-
Benjamin

My main reason for testing PSE-O 9.0 was to find out if this "bug" was fixed. I can not use PSE-O to organize and show pictures the way I want to with this weaknes in place. Your answer is probably correct, bun not at all helpfull.
So thank you for trying, but my test of PSE O is over for now.
Does anybody out there know of other products that will do the trick?

Multi-monitor SW is affecting VMware performance on Helix

I have discovered that running multi-monitor software like Matrix desktop management is affecting the VMware Workstation 10 guest performance so drastically that virtual machines become literally unusable. Similar experience is reported by other people using different multi-monitor software like DisplayFusion, see https://communities.vmware.com/message/2315099#2315099
ThinkPad W520, i7-2820 CPU, 32GB RAM, NVidia Quadro 2000M 2GB GPU , mSATA Samsung Evo 840 1TB + 2x Samsung SSD EVO 840 1TB & Lenovo Helix i7 8GB RAM & ThinkPad W540, i7-4800MQ, 32 GB RAM, NVidia Quadro K1100M, OS on M.2 2242 Transcend MTS400 256GB + 2x Samsung SSD EVO 840 1TB

Ray, it will do a lot more good if you file an official bug report at http://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
Be sure to describe the configuration in extreme detail.
Peter

Mouse pointer is unchangeable at 100% scaling in multi monitor setup with different resolutions

Hi there, I have been asked by one of the moderators of the Windows 8.1 forums to post this topic here. You can see the thread relating to this post here
http://answers.microsoft.com/en-us/windows/forum/windows8_1-tms/cant-change-the-cursor-pointer/ae8ad8a0-3ded-4810-a3be-794f6c4830a4?msgId=2bd7082f-f5d1-4b01-8c70-e0d2a754d66f&page=1<o:p></o:p>
The problem: The mouse pointer becomes unchangeable in size, type, trails etc when 100% scaling is used. As in it reverts to the standard small white non-inverted, no trails,
no shadow 'pointer', no matter what options you select in the 'Mouse' control panel settings.<o:p></o:p>
This appears to be a scaling problem with the Windows 8/8.1 display, not an actual mouse problem. Judging by my own and other peoples experience it seems to happen mainly with multi
monitor setups where different screen resolutions are used. The issue occurs typically when 100% scaling for all monitors is used or this option is un-ticked and the 'change the size of all items' is on smallest (equivalent to 100%). <o:p></o:p>
If the scaling is set to 150% or greater the issue disappears and the mouse pointer becomes fully functional. Also bizarrely when the scaling is set to 100% if the screen is recorded
using a screen capture program, the recording of the screen shows the mouse pointer selected in the mouse options and not the default small white cursor that is present when recording it. Here is a link to a video where I explain and show the problem
happening on my system. http://youtu.be/xs2cxoeaq-A<o:p></o:p>
I have every update installed without exception, latest drivers etc. I use a 55" 4k screen with 2x1080p monitors in portrait on either side. All are connected through 1 Nvidia
GTX 780 6GB graphics card<o:p></o:p>
Hope you can help us<o:p></o:p>
thanks<o:p></o:p>
Jon M<o:p></o:p>

Hi Jon,
I'm looking into this issue but it will take me some time to provide a reply.
In the meantime I noticed that you have 3 monitors with 1x 55' and 2x27' - please have a try to only connect 1x27' monitor and see if issue persists.
Also please try to change the screen resolution to a lower size and see if issue persists.
Both suggestions are not solution, I just would like to know if it is related to multiple monitor or screen resolution.
If you have any feedback on our support, please send to [email protected]

View links in multi table relations

Is it advisable (in terms of performance e. g.), to create view links and view objects as local variables in multi table relations?
examle: the jdev online help says to use
such multi table relations like this:
// A (one) -> B (many) -> C (many)
ViewLink a2b = appMod.findViewLink("AtoB");
ViewLink b2c = appMod.findViewLink("BtoC");
ViewObject aV = a2b.getSource();
ViewObject bV = a2b.getDestination();
ViewObject cV = b2c.getDestination();
while(aV.hasNext())
Row aR = aV.next();
while(bV.hasNext())
Row bR = cV.next();
while(cV.hasNext())
Row cR = cV.next();
I would rather keep everything concerning
a, b, c together, especially when more
tables (d, e, ...) are added, like this
ViewLink a2b = appMod.findViewLink("AtoB");
ViewObject aV = a2b.getSource();
while(aV.hasNext())
Row aR = aV.next();
ViewLink b2c = appMod.findViewLink("BtoC");
ViewObject bV = a2b.getDestination();
while(bV.hasNext())
Row bR = cV.next();
ViewObject cV = b2c.getDestination();
while(cV.hasNext())
Row cR = cV.next();
Is there anything to say against this approach (in term of performance for example). I am not sure to remeber,
if this was the approach used in the HotelResevationSystem example.
Thanks.
Rx
null

For this to work you have to either build a view based on the entities from which you need attributes (joined by the FK) or build a ViewObject with the sql statement giving you all the attributes you need.
The first case enables you the edit the attributes, the second gives you read only access to the attributes.
What you try to do isn't a master-detail connection, you are doing a join of some tables.
Timo

Multi monitor cursor swapping

I've got three monitors lined up and I'm looking for a way to instantly center the cursor on a specific display to avoid dragging it everywhere. I know there's a software called Multi Monitor Mouse for Windows which is supposed to handle that pretty well. So do you guys know a corresponding software or script for mac or is it possible to run the win. app in OS X via 3rd party software?
/Erik

Is the question clear or should I rephrase it?
I need a keyommand to move the cursor from one screen to another.

Multi monitor on xp partition

I'm having a problem with setting multi-monitor for the xp side partition. I use xp most of the time and having problem with the multi screen.
please help
thanks guys

i got it working finally

Multi Monitor - different Screeen Saver for different monitor - Setting for notebook computers...

Hi,
I have a question about the multi monitor, screen saver setting for Windows 7. I'd like to know 2 questions.
1.) if I can set different screen saver settings on different monitors
2.) If I can do it, can I work on the external (or non-primay) monitor, when I have the primary monitor with "blank" screen saver?
Basically, I put my notebook computer at the docking station at work, and the docking station is connected to a 22" monitor, desktop keyboard and mouse. So, at work, the 22" monitor and K/B would be my primary use. However, I still "flip"
open the notebook monitor for dual monitor use.
I'd like to "save" the notebook monitor when I don't use it for 30 min. or so... I'd like to "power" it off or set it so that it would only turn on if I move my mouse to that screen.
Is there a way to do it?
Thanks

Hi
There isn't any way to do what you are describing.
The reason is that both monitors have the same source for the video. You can extend the video to the second monitor, but this just gives you more screen space.
The screen saver will only display on the monitor that is set as the default and when the screen saver starts, the other monitor will be blank.
Hope this helps.
Thank You for using Windows 7
Ronnie Vernon MVP

ATI card + OS driver + multi monitor

Hello everyone,
I'm stuck configuring the RadeonHD drivers for multi monitor setup. The system starts with both screens cloned; logging in is in clone mode too. After that the second display is being turned of (no signal). Using xrandr --auto will enable the second display to life and clones the sreen again. xrandr --output DVI-I_1/analog --left-of DVI-I_2/analog will create a big desktop only the second display can only be used for a half screen mouse will go further anything else will not.
I've started with a autogenerated, by xorg, xorg.conf file and tweaked to the one below
xorg.conf
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
# Load "glx"
# Load "dbe"
# Load "dri2"
# Load "extmod"
# Load "dri"
# Load "record"
EndSection
Section "Monitor"
Identifier "AL1916W"
VendorName "Acer"
ModelName "AL1916W"
DisplaySize 1440 900
EndSection
Section "Monitor"
Identifier "AL2016W"
VendorName "Acer"
ModelName "AL2016W"
Option "RightOf" "AL1926W"
DisplaySize 1680 1050
EndSection
Section "Device"
### Available Driver options are:-
### Values: : integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "AccelMethod" # [<str>]
#Option "offscreensize" # [<str>]
#Option "SWcursor" # [<bool>]
#Option "ignoreconnector" # [<str>]
#Option "forcereduced" # [<bool>]
#Option "forcedpi" # 
#Option "useconfiguredmonitor" # [<bool>]
#Option "HPD" # <str>
#Option "NoRandr" # [<bool>]
#Option "RROutputOrder" # [<str>]
#Option "DRI" # [<bool>]
#Option "TVMode" # [<str>]
#Option "ScaleType" # [<str>]
#Option "UseAtomBIOS" # [<bool>]
#Option "AtomBIOS" # [<str>]
#Option "UnverifiedFeatures" # [<bool>]
#Option "Audio" # [<bool>]
#Option "AudioStreamSilence" # [<str>]
#Option "HDMI" # [<str>]
#Option "COHERENT" # [<str>]
#Option "ForceLowPowerMode" # [<bool>]
#Option "LowPowerModeEngineClock" # 
Option "monitor-DVI-I_1/analog" "AL1916W"
Option "monitor-DVI-I_2/analog" "AL2016W"
Identifier "Card0"
Driver "radeonhd"
VendorName "ATI Technologies Inc"
BoardName "RV710 [Radeon HD 4350]"
BusID "PCI:2:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
# Monitor "AL1916W"
SubSection "Display"
Depth 24
# Virtual 3840 1920
EndSubSection
EndSection
My Xorg.0.log shows the line (WW) RADEONHD(0): Option "monitor-DVI_I_2/analog" is not used wich puzzles me!
Information:
X.Org X Server 1.7.1.901 (1.7.2 RC 1)
xrandr program version 1.3.2
Server reports RandR version 1.3
xf86-video-radeonhd 1.3.0-1
If more information, from Xorg.0.log or anywhere else, is needed just ask....
Thanks in advance,
Arjan Gelderblom
Last edited by Bloged (2009-12-14 10:02:05)

Sorry for the delay, but I was away for the weekend!
Andrwe wrote:Please try setting the bigger one monitor right-of the small one.
xrandr --output DVI-I_2/analog --right-of DVI-I_1/analog
This doens't change much except that now the smaller monitor has the problems!
litemotiv wrote:try using xf86-video-ati instead of radeonhd. i tried to get xrandr working for over a week having exactly the same problem, ultimately switched drivers and had everything set up in ~10 minutes.
Changed to ati instead of the radeonhd drivers still gives the same error!
Eratosthenes wrote:
I think you need to set a valid virtual size in your xorg. I think the one you have commented out is too large.
Mine is:
Subsection "Display"
Virtual 3200 1200
EndSubsection
Changed see new xorg.conf
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
# Load "glx"
# Load "dbe"
# Load "dri2"
# Load "extmod"
# Load "dri"
# Load "record"
EndSection
Section "Monitor"
Identifier "AL1916W"
VendorName "Acer"
ModelName "AL1916W"
EndSection
Section "Monitor"
Identifier "AL2016W"
VendorName "Acer"
ModelName "AL2016W"
Option "RightOf" "AL1926W"
EndSection
Section "Device"
### Available Driver options are:-
### Values: : integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "AccelMethod" # [<str>]
#Option "offscreensize" # [<str>]
#Option "SWcursor" # [<bool>]
#Option "ignoreconnector" # [<str>]
#Option "forcereduced" # [<bool>]
#Option "forcedpi" # 
#Option "useconfiguredmonitor" # [<bool>]
#Option "HPD" # <str>
#Option "NoRandr" # [<bool>]
#Option "RROutputOrder" # [<str>]
#Option "DRI" # [<bool>]
#Option "TVMode" # [<str>]
#Option "ScaleType" # [<str>]
#Option "UseAtomBIOS" # [<bool>]
#Option "AtomBIOS" # [<str>]
#Option "UnverifiedFeatures" # [<bool>]
#Option "Audio" # [<bool>]
#Option "AudioStreamSilence" # [<str>]
#Option "HDMI" # [<str>]
#Option "COHERENT" # [<str>]
#Option "ForceLowPowerMode" # [<bool>]
#Option "LowPowerModeEngineClock" # 
Option "monitor-DVI-1" "AL1916W"
Option "monitor-DVI-0" "AL2016W"
Identifier "Card0"
Driver "ati"
VendorName "ATI Technologies Inc"
BoardName "RV710 [Radeon HD 4350]"
BusID "PCI:2:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "AL1916W"
SubSection "Display"
Depth 24
Virtual 3120 1050
EndSubSection
EndSection
Andrwe wrote:BTW could you please sent teh log, maybe there is something you may have missed.
Because of the switch to ati from radeon the log is different now... but here it is: http://pastebin.com/m77d0ea0b
This one at least shows that my seccond monitor is connected which failed in radeonhd!
Thanks for all the help,
Arjan Gelderblom
Edit: changed topic title to have it apply better to it's content
Last edited by Bloged (2009-12-14 10:02:47)

Multi-part related query reports

http://download-east.oracle.com/docs/html/B10310_01/orbr_concepts1.htm#1012365
Can someone provide me better info about 'Multi-part related query reports '

Hi,
yes you can have multiple query in your report. So you have multiple groups in your data model. Then you must put multiple repeating frames in your layout in order to extract data from your queries, selecting the desired group in the source property of your repeating frame.
Bye
Raffy

Get the current active monitor handle in multi monitor environment

Hi,
I have a requirement to get the HMONITOR handle of the active monitor in multi monitor environment.
i.e; Get the HMONITOR of the currently selected monitor
Thanks in advance

Hi Chris Lewis,
Thanks for quick reply.
I'm referring to the monitor, where a window is invoked
I want to identify from which monitor, my window was invoked, so that I can create and show the window in that monitor.
I had already tried using MonitorFromWindow(). But it always give primary monitor handle.
My Code:
HMONITOR hMonitor = ::MonitorFromWindow(myMainFrame->GetSafeHwnd(), MONITOR_DEFAULTTONEAREST);
hMonitor always refers to Primary monitor, though window is invoked from Secondary monitor.
Thanks in advance

Multi monitor issues with resolution(?)

At a customer I have got a really strange and annoying problem. The customer has got a Hyper-V VM with 2012 R2 Server as a RDS server aka Terminal Server.
One user has got issues with his multi monitor setup. The connection settings seems to be OK. It is set to full screen and the checkbox for the multi monitor configuration is enabled. Theoretically this works because the user sees a correct setup with one
primary display and one secondary display. The settings itself are correct.
1. Primary display: 1680*1050
2. Secondary display: 27" 1920*1080
The display settings on the client are nearly the same except that the numbers of the two monitors are different (those numbers you get when you click identify at the resolution change window). On the Windows 7 client the primary display
number 2 and the 27" has got the number 1. On the Terminal Server the primary display has got the number 1 and the 27" display has got the number 2. But the corresponding resolution at the display number is correct.
Now the problem. Everything seems fine, the desktop is expended. But when the user is "touching" the top or bottom edge of the screen the display is scrolling (in full screen) - like in a 3D game scrolling over a map. The user told me that
both screens are scrolling equally at the same time. I am not sure but the user told me that if he is going to the bottom the CLIENT task bar appears. Changing the task bar of the client to fixed the user told me that the task bar will always show up. - Strange
that CTRL + ALT + BREAK does not work.
I tried to press CTRL + ALT + BREAK twice, changing the resolution to a fixed value and back to full screen again, changing the primary display to the new 27" monitor, adding smart sizing:i:1 to rdp file and upgrading the Intel HD
4600 laptop graphic drivers (must be downloaded from Lenovo :/). NOTHING helped :(.
But this strange behavior does not exist on the client. Opening two programs (simple notepad e.g.) on each display and maximize them and moving the mouse the screen borders won't show this problem. It only exist on the remote session.
Now the "funny" part. If I connect with Team Viewer to the client the problem disappears as long as I am connected. If I disconnect the problem shows up again.

Hi,
This is most likely a problem with the local machine's graphics driver and monitor configuration. I would suggest trying different things like removing and re-installing the display adapter and its drivers, removing the second monitor/restarting/adding
the second monitor back, adjusting the multi-monitor settings in display properties (changing between extending the desktop to the second monitor and not), undocking/restarting/docking, changing between different modes using Fn key on laptop (if laptop), etc.
The behavior under Team Viewer is likely because the graphics configuration is different when the driver is active.
I wish I could give you more precise instructions on how to resolve the issue. I have seen this behavior (panning desktop, multi-monitor config not exactly right) probably 3 times over the last 5 years, always with a laptop, and I had to "play"
with the settings before it finally went back to normal. The instances I have seen it occur did not involve Remote Desktop specifically.
-TP

Multi-select LOV bug and Developer6i R2 Patch7

Has anyone verified that Patch7 corrects the problem with multi-
select LOV bug (see below). The Headstart6i Report Launch form
(QMS0012F) exhibits this bug (when using the demo reports for
example) and we were unsuccessful applying the workaround (see
below). We will upgrade to Patch7 if this bug is fixed or we
could use a little help from the HeadStart team correcting the
Report Launch form to get around this bug. Thanks, Keith
We have found one odd quirk with Headstart 6i and Forms
6i versions 6.0.13 and higher.
Description ===========
1. When using a multi-select LOV (which is displayed in a modal
dialog window), you select the records you want, press OK, and
the application exits.
2. When using a shuttle control to move records from left to
right or vice versa, you select the records you want, press '>'
to move them, and the application exits. This occurs in Forms
6.0.8.13.0 and higher. It did NOT occur in prior releases. This
is some kind of forms bug.
Workaround ==========
For some reason the call to procedure 'renumber' in
qms$msel.process_records in qmslib65.pll causes the application
to exit. If you copy the code from renumber to all the places
from which it is called, it works fine.

So far as I know, this bug has not yet been corrected.
You will have to apply the fix as described in your email
message.
Regards, Lauri

Uix 2.2.8 multi monitor related bug

Similar Messages

Maybe you are looking for