UML295 issue

I very recently upgraded to the UML295 from the USB760.  On the old modem I was getting about 80-85 dbm average.  Now changing to 4g and a supposedly better modem, I am averaging 110-114 dbm.  I have not changed my antenna.  I haven't moved out of my office here in my home.  Nothing has changed except the modem.  Any ideas why I have such a low speed?  I was told that the Pantech would be a better modem and that going to 4g would speed things up.  Okay, who were they trying to kid.

    Hi Gmagg,
I'd like to help you! The speeds on your device can be affected by many factors. What's your zip code? Are you on the indoors? Ensure you've downloaded the latest VZW access manager software for the new device on your computer. Here's a link to help http://tiny.cc/mhma4w.
Thanks,
EdW_VZW
Follow us on Twitter @VZWSupport   

Similar Messages

  • UML295 and Lenovo X1 connectivity issues

    I have a UML295 and I'm attempting to use it with Lenovo's X1 Carbon (Model 20A) and I'm having some serious issues.  Well, my end user is.  After a restart, card is inserted and works perfectly.  I don't need to open up the MBB software, anything.  If I disconnect or just remove the device and wait a few minutes to plug it back in, it doesn't' work.  Indicator light turns green, flickers, etc.  No internet.  I open up the MBB software and shows I'm connected but doesn't go anywhere, or the software doesn't recognize that the card has been inserted.  It displays this behavior on multiple X1 Carbon machines that I have here.  I've tested it on an older T530 Thinkpad and it works as intended.  No need to install the MBB software neither.  As soon as the indicator light turns green, I'm good to go on internet access.
    Is there a firmware update or a known issue between these cards and the X1 Carbon?  It's frustrating to our reporters that they can't use their new laptops out in the field.
    Thank you

    USB modem devices need both drivers and connection software to facilitate a connection to the VZW network.  I suggest going out and downloading the latest of both from VZW and retesting on your machine.
    UML295 download:
    http://www.verizonwireless.com/support/knowledge-base-72600/
    Otherwise the problem that you mentioned here is specifically resolved by use of a Jetpack.  No drivers, no software.  All users need is normal WiFi and they will be able to access the internet just like at any other hotspot.  This was a big advantage for us in addition to the reduced hardware costs of broken USB ports on laptops and USB modems.

  • Issues with Windows 8 and UML295...?

    This is my first experience using any sort of USB dongle for wireless internet. I'm using a Pantech UML295 with a Lenovo Yoga Convertible Laptop with Windows 8 Professional. Upon inserting the USB dongle into the laptop, it takes a few moments but does eventually connect to the internet. My big thing is that I need to be able to use my Sonicwall Global VPN Client to connect to my corporate network. However, when I launch the application (with the UML295 plugged in) the program never opens. I've also noticed that many other applications either don't open or run extremely slow. Interestingly enough, as soon as I remove the UML295, all "hung" programs magically refresh and open up as normal. The VPN client pops open and attempts to connect (assuming my WiFi signal picks up where the UML295 left off.)
    I attempted the same scenario on a Windows 7 laptop and all worked just fine. It looks to me like it's a Windows 8 compatibility issue with the UML295. Has anyone else been experiencing this? With the UML295 being so new, I have been unsuccessful in finding much information on this topic. Hopefully others will start to have some of the same problems and will begin posting their findings. Working in the IT business, I find this issue to be very frustrating, as I am usually the one that's able to solve these types of problems!

    I think I found a solution to my own problem, in case anyone else runs into this.
    I was able to get it working by launching the Sonicwall Global VPN client BEFORE I plugged in the UML295. It's a very slow connection process but it still connects nonetheless - you just have to be patient with it. After the SW VPN client is enabled, the UML295 will find an IP address and then proceed to authenticate itself on the corporate VPN.
    I hope someone can find this information useful.

  • UML295 constant reset and blue led

    So I've tried 2 UML295's now and having quite a bit of trouble.  At first I thought I just got a busted modem the first time around.  But after the 2nd one I'm wondering what is possibly going wrong.
    The first time I used either of them, they worked fine.  Connected, got online, got good speed, etc.
    Now they just appear to be in a constant reset loop over and over.  Device manager keeps chiming in that devices are getting plugged/unplugged over and over again.   On the UML295 itself the light is red for a bit, I see the devices start popping up in device manager, then the light turns blue for a while and the devices go away.
    I've searched all over the place for the meaning of the blue light, but every doc VZ has on this thing describes. red, green, white & amber lights. Never does anything mention blue.
    Any ideas?  perhaps firmware updates failed on these??
    I've tried 2 different laptops (win 8.1 on a surface pro 2,  Win 7 on a Dell laptop and Win 7 on a homebuilt desktop) and all have the same results.  Card powers up, red led, DM chimes in, led turns blue, DM chimes out... rinse repeat.
    --Chris

    Access Administration Page - Verizon 4G LTE USB Modem UML295
    This helps navigate to the admin page or if you've forgotten the admin password for your device. Our Troubleshooting Assistant can help you with other device issues if you aren't currently using the tool.
    Firewall, Internet Security, Anti-virus, etc. software may prevent access to the administration interface. Port 4330 and IP address range 192.168.32.x may need to be opened/unblocked within these applications in order to access the interface. Contact your local admin and/or the application developer for assistance with these settings.
    Access via the Web Interface
    Access via the App
    Access via the Web Interface
    With the USB modem connected to the computer and the LED Status Indicator blinking green, launch a Web browser then navigate to mbb.vzw.com (or the IP address 192.168.32.2).
    Ensure the computer is not connected to an alternate Internet connection (e.g. LAN, Wi-Fi).
    - You should then see the option to update the firmware.

  • UML295 Win 7

    I will try to explain this the best i can.
    I have 2 windows 7 MDT's for a police department that are running the uml295. during setup the only way i could get the pc to start the connection automatically was to download the IPPT (ip pass thru) program that Verizon provided. I tried logging into the interface and setting it up at automatic but what would happen is the aircard would connect but the moment i rebooted the pc and logged back in the connection in the network settings would be disabled and i could not enable it. well today we have installed a LPR system on 2 of them which uses an ethernet port to pass the data from the camera to their software which would not work until i changed the setting in the IPPT program from IPPT to Standard which let the LPR system work but then disabled the aircard. so i am back to square one again. I have called verizon i have taken the MDT into a store just to try another aircard (which i was laughed at) and so far no one has been able to help me. The reason why i need the connection to be active on login is we are using a client vpn called netmotion which makes the connection to our server as the user logs in. If i do not have a connection then the netmotion fails and the user has to manually make their connection.

    I too work for a local police dept., and we've experienced issues with the UML295 & Windows 7. Before the release of the IPPT utility the UML295 would introduce a lot of system lag on MDT's running Windows 7. It would also cause Netmotion to delay when handing off to the onboard 802.11 wireless and introduce another set of problems. The solution was to have our rep send us refurb UML290's since they did not require the IPPT utility.
    I tried logging into the interface and setting it up at automatic but what would happen is the aircard would connect but the moment i rebooted the pc and logged back in the connection in the network settings would be disabled and i could not enable it. well today we have installed a LPR system on 2 of them which uses an ethernet port to pass the data from the camera to their software which would not work until i changed the setting in the IPPT program from IPPT to Standard which let the LPR system work but then disabled the aircard.
    I've never experienced the air card interface being disabled under network connections upon reboot. I just installed the IPPT utility (set to auto-connect) and a new UML295 on one of our ALPR Win7 MDT's, and upon reboot I have no issues authenticating with Netmotion. You may want to verify that your Netmotion server (tools > policy mgmt) is set to ignore and hide the local interface(s) which would include your LPR system as well as any other AV system.

  • T1114 port forwarding issue

    Hi:
    We have a Novatel T1114 4G router which we just purchased with a Static IP assigned to it via Verizon ($500 charge).  We get Internet Access, but we cannot get Port Forwarding to work.  We have used the Advanced options to open everything and the specific port range we need.  We even created a DMZ.  WE used ShieldsUp to sniff for open ports, but everything is still closed.  Any suggestions?
    Thanks,
    Vin

    Ok, I have an update, progress has been made, but we're still not there yet.  We do have a Static IP assigned, Verizon indicated that the ports are not blocked, and we did get regular Internet access.  The Verizon Novatel router modem simply did not allow the Port forwarding, Verizon indicated we needed to try a router that could support a plug in 4G modem.
    We purchased a Pepwave Surf SOHO router which has a USB port to allow a USB 4G Modem to be used.  We exchanged the router modem for a Novatel UML295 USB modem.  That got us back to Internet access, but still no Port Forwarding.  The issue was that double NAT was occurring, both the router and USB modem were actively doing it.  Back to the drawing board.
    We exchanged the router for a Pepwave BR-1, which allows the SIM from the USB modem to be directly plugged in - no modem required (folks at 3GStore have been helpful).  Almost there: we can get Port messages in bound (hooray!), but not outbound (boo!).  I will be talking to 3GStore today to ensure I have set up the BR-1 correctly and to Verizon to ensure that outbound traffic is not blocked.
    I'll revisit this as soon as I know more...
    Vin

  • UML295 and USB 3.0

    I've spent to days trying to get  an aircard working with my laptop. It just won't recognise it. Doing a google search, I saw on the Apple forums that they have the same problem, stating the UML295 does not work with USB 3.0 ports, which or course I have. Does anyone know of a way round this problem?

    USB 3.0 is backwards compatible with previous versions.  When USB 3.0 devices or ports do not work then the drivers on the computer need to be updated.  A USB 2.0 device should work just fine on a USB 3.0 port.  Likewise a USB 3.0 device should work on a USB 2.0 port, just not to its full potential.
    For example, I am aware of an issue with Win7 laptops when certain HP Printer models are USB connected a BSOD occurs.  The solution to the problem was a driver update from the motherboard (in this case Intel) manfacturer.  If you can look up what kind of USB ports you have on your computer and who created the drivers for them then I'm sure you can find a patch to correct the problem.

  • UML295 on Apple Laptop

    Over the last few months, I have noticed a significant increase in the number of times I am dropped off the internet using the UML295 on my Apple. The service has fallen off so bad that we are considering dropping the service even though Verizon does seem to have the largest service area (which is important as we travel in a motorhome).  When we first purchased it, we had good service in Corpus Christi. Now, we have to log back on constantly. Anyone have any ideas what my problem is ?  I have been unable to get a helper from Verizon on the phone to discuss, nor can I get a chat started with a Verizon representative.

        USMCJS, a few months is a long time to have an ongoing connection issue on your USB device. We're stepping in to help. Since having this issue, have you powered that device off/on to soft reset it? Additionally, we also recommend that you remove that USB connection from your Apple device and then reconnect it. Keep us posted and click  http://bit.ly/y5iuoj for more device support.
    LasinaH_VZW
    Follow us on Twitter @VZWSupport

  • Issues with CCP2.8 and Cisco892W

    hi
    i  have a problem with my ccp2.8. when i connect to my router(cisco892W) with ccp2.8 it doent works only the section with SECURITY.
    when i try to click it stays on "LOADING"  about 5 min and than comes the messege "The connection with the device 192.168.1.1 has been lost. rediscorer the device to continue to work."
    on the VPN section shows that either ios image does not support this feature or license required activation:
    this router has no license feature , it is ADVIPSEC and vpn is suported
    i made 2 pics of this
    I already make in the IE compability the 127.0.0.1 and run as administrator! 
    IOS ver c890-universalk9-mz.153-3.M.bin
    IE 11
    JAVA 8.40
    Can anyone hepl me with this issues?
    Best regards

    I think I found a solution to my own problem, in case anyone else runs into this.
    I was able to get it working by launching the Sonicwall Global VPN client BEFORE I plugged in the UML295. It's a very slow connection process but it still connects nonetheless - you just have to be patient with it. After the SW VPN client is enabled, the UML295 will find an IP address and then proceed to authenticate itself on the corporate VPN.
    I hope someone can find this information useful.

  • New DVR Issues (First Run, Channel Switching, etc.)

    I've spent the last 30 minutes trying to find answers through the search with no luck, so sorry if I missed something.
    I recently switched to FIOS from RCN cable in New York.  I've gone through trying to setup my DVR and am running into issues and was hoping for some answers.
    1.  I setup two programs to record at 8PM, I was watching another channel at the time and only half paying attention.  Around 8:02 I noticed a message had popped up asking if I would like to switch channels to start recording.  I was expecting it to force it to switch like my old DVR, but in this case it didn't switch and I missed the first two minutes of one of the shows.  I typically leave my DVR on all day and just turn off the TV, this dual show handling will cause issues with that if I forget to turn off the DVR.  Is there a setting I can change that will force the DVR to choose one of the recording channels?
    2.  I setup all my recordings for "First Run" because I only want to see the new episodes.  One show I setup was The Daily Show on comedy central, which is shown weeknights at 11pm and repeated 3-4 times throughout the day.  My scheduled recordings is showing all these as planned recordings even though only the 11pm show is really "new".  Most of the shows I've setup are once a week so they aren't a problem, but this seems like it will quickly fill my DVR.  Any fixes?
    Thanks for the help.
    Solved!
    Go to Solution.

    I came from RCN about a year ago.  Fios is different in several ways, not all of them desirable.  Here are several ways to get--and fix--unwanted recordings from a series recording setup.
    Some general principles. 
    Saving changes.  When you originally create a series with options, or if you go back to edit the options for an existing series, You MUST save the Series Options changes.  Pretty much everywhere else in the user interface, when you change an option, the change takes effect immediately--but not in Series Options.  Look at the Series Options window.  Look at the far right side.  There is a vertical "Save" bar, which you must navigate to and click OK on to actually save your changes.  Exiting the Series Options window without having first saved your changes loses all your attempted changes--immediately.
    Default Series Options.  This is accessed  from [Menu]--DVR--Settings--Default Series Options.  This will bring up the series options that will automatically be applied to the creation of a NEW series. The options for every previously created series will not be affected by a subsequent modification of the Default Series Options.  You should set these options to the way you would like them to be for the majority of series recordings that you are likely to create.  Be sure to SAVE your changes.  This is what you will get when you select "Create Series Recording" from the Guide.  When creating a new series recording where you think that you may want options different from the default, select "Create Series with Options" instead.  Series Options can always be changed for any individual series set up later--but not for all series at once.
    Non-series recordings.  With Fios you have no directly available options for these.  With RCN and most other DVRs, you can change the start and end times for individual episodes, including individual episodes that are also in a series.  With Fios, your workarounds are to create a series with options for a single program, then delete the series later;  change the series options if the program is already in a series, then undo the changes you made to the series options later; or schedule recordings of the preceding and/or following shows as needed.
    And now, to the unwanted repeats. 
    First, make sure your series options for the specific series in question--and not just the series default options--include "First Run Only".  If not, fix that and SAVE.  Then check you results by viewing the current options using the Series Manager app under the DVR menu.
    Second, and most annoying, the Guide can have repeat programs on your channel tagged as "New".  It happens.  Set the series option "Air Time" to "Selected Time".  To make this work correctly, you must have set up the original series recording after selecting the program in the Guide at the exact time of a first run showing (11pm, in your case), and not on a repeat entry in the Guide.  Then, even it The Daily Show is tagged as New for repeat showings, these will be ignored. 
    Third, another channel may air reruns of the program in your series recording, and the first showing of a rerun episode on the other channel may be tagged as "New".  These can be ignored in your series if you set the series option "Channel" to "Selected Channel".  Related to this, if there is both an SD and HD channel broadcasting you series program, you will record them both if the series option "Duplicates" is set to "Yes".  However, when the Channel option is set to "Selected Channel", the Duplicates Option is always effectively "No", regardless of what shows up on the options screen.  
    As for you missing two minutes,  I have sereral instances in which two programs start recording at the same time.  To the best of my recollection, whenever the warning message has appeared, ignoring it has not caused a loss of recording time.  You might have an older software version.  Newest is v.1.8.  Look at Menu--Settings--System Info.  Or, I might not have noticed the loss of minutes.  I regularly see up to a minute of previous programming at the start of a recording, or a few missing seconds at the beginning or end of a recording.  There are a lot of possibilities for that, but the DVR clock being incorrect is not one of them.  With RCN, the DVR clocks occasionally drifted off by as much as a minute and a half.

  • Pension issue Mid Month Leaving

    Dear All,
    As per rule sustem should deduct mid month joining/leaving/absences or transfer scenarios, the Pension/PF Basis will be correspondingly prorated. But our system is not doing this. In RT table i have found 3FC Pension Basis for Er c 01/2010                    0.00           6,500.00.
    Employee leaving date is 14.04.2010. system is picking pension amout as 541. Last year it was coming right.
    Please suggest.
    Ashwani

    Dear Jayanti,
    We required prorata basis pension in case of left employees and system is not doing this. This is the issue. As per our PF experts Pension amount should come on prorata basis for left employees in case they left mid of month.System is doing prorata basis last year but from this year it is deducting 541. I am giving two RT cases of different years.
    RT table for year 2010. DOL 26.04.2010
    /111 EPF Basis              01/2010                    0.00           8,750.00 
    /139 VPF Basis              01/2010                    0.00           8,750.00 
    /3F1 Ee PF contribution     01/2010                    0.00           1,050.00 
    /3F3 Er PF contribution     01/2010                    0.00             509.00 
    /3F5 Ee Mon PF contribution 01/2010                    0.00           1,050.00 
    /3F6 Ee Ann PF contribution 01/2010                    0.00          12,600.00 
    /3F9 PF adm chrgs * 1,00,00 01/2010                    0.00              96.25 
    /3FA PF basis for Ee contri 01/2010                    0.00           8,750.00 
    /3FB PF Basis for Er Contri 01/2010                    0.00           8,750.00 
    /3FJ VPF basis for Ee contr 01/2010                    0.00           8,750.00 
    /3FL PF Basis for Er Contri 01/2010                    0.00           6,500.00 
    /3F4 Er Pension contributio 01/2010                    0.00             541.00
    /3FC Pension Basis for Er c 01/2010                    0.00           6,500.00
    /3FB PF Basis for Er Contri 01/2010                    0.00           8,750.00
    /3FC Pension Basis for Er c 01/2010                    0.00           6,500.00
    /3FJ VPF basis for Ee contr 01/2010                    0.00           8,750.00
    /3FL PF Basis for Er Contri 01/2010                    0.00           6,500.00
    /3R3 Metro HRA Basis Amount 01/2010                    0.00           8,750.00
    1BAS Basic Salary           01/2010                    0.00           8,750.00
    RT table for year 2009. DOL 27.10.2009
                                                                                    /111 EPF Basis              07/2009                    0.00           9,016.13
    /139 VPF Basis              07/2009                    0.00           9,016.13
    /3F1 Ee PF contribution     07/2009                    0.00           1,082.00
    /3F3 Er PF contribution     07/2009                    0.00             628.00
    /3F5 Ee Mon PF contribution 07/2009                    0.00           1,082.00
    /3F6 Ee Ann PF contribution 07/2009                    0.00           8,822.00
    /3F9 PF adm chrgs * 1,00,00 07/2009                    0.00              99.18
    /3FA PF basis for Ee contri 07/2009                    0.00           9,016.00
    /3FB PF Basis for Er Contri 07/2009                    0.00           9,016.00
    /3FJ VPF basis for Ee contr 07/2009                    0.00           9,016.00
    /3FL PF Basis for Er Contri 07/2009                    0.00           5,452.00
    /3FB PF Basis for Er Contri 07/2009                    0.00           9,016.00 
    /3FC Pension Basis for Er c 07/2009                    0.00           5,452.00 
    /3FJ VPF basis for Ee contr 07/2009                    0.00           9,016.00 
    /3FL PF Basis for Er Contri 07/2009                    0.00           5,452.00 
    /3R4 Non-metro HRA Basis Am 07/2009                    0.00           9,016.13 
    1BAS Basic Salary           07/2009                    0.00           9,016.13 
    Now please suggest what to do. where is the problem  ? If have also checked EXIT_HINCALC0_002 but nothing written in it.
    With Regards
    Ashwani

  • Open PO Analysis - BW report issue

    Hello Friends
    I constructed a query in BW in order to show Open Purchase Orders. We have custom DSO populated with standard
    datasource 2lis_02_itm (Purcahse Order Item). In this DSO we mapped the field ELIKZ to the infoobject 0COMP_DEL
    (Delivery completed).
    We loaded the data from ECC system for all POs and found the following issue for Stock Transport Purchase orders (DocType = UB).
    We have a PO with 4 line items. For line items 10 and 20, Goods issued, Goods received and both the flags "Delivery
    complete" and "Final delivery" checked. For line items 30 and 40, only delivery indicator note is issued for zero
    quantity and Delivery complete flag is checked (Final delivery flag is not checked) in ECC system. For this PO, the
    delivery completion indicator is not properly updated in the DSO for line items 30 and 40. The data looks like the
    following:
    DOC_NUM     DOC_ITEM       DOCTYPE     COMP_DEL
    650000001       10     UB        X
    650000001       20     UB        X
    650000001       30     UB
    650000001       40     UB      
    When we run the Open PO analysis report on BW side this PO is appearing in the report but the same is closed in ECC
    system.
    Any help is appreciated in this regard.
    Thanks and Regards
    sampath

    Hi Priya and Reddy
       Thanks for your response.
                         Yes the indicator is checked in EKPO table for items 30 and 40 and delta is running regularly for more than 1 year and no issues with other POs. This is happening only for few POs of type Stock Transport (UB).
                        I already checked the changes in ME23N and the Delivery completed indicator was changed and it reflected in EKPO table. Further, i checked the PSA records for this PO and i am getting the records with the Delivery completed flag but when i update from PSA to DSO the delivery completed indicator is not updating properly.
                       In PSA, for item 30 i have the following entries. Record number 42 is capturing the value X for ELIKZ but after that i am getting two more records 43 and 44 with process key 10 and without X for ELIKZ. I think this is causing the problem.
    Record No.    Doc.No.                    Item              Processkey         Rocancel     Elikz
        41               6500000001            30                    11                            X           ---    
        42               6500000001            30                    11                            ---           X
        43               6500000001            30                    10                            X           ---
        44               6500000001            30                    10                            ---         ---
    (Here --- means blank)        
    Thanks and Regards
    sampath

  • HP LaserJet Enterprise 600 M602 driver issue

    Hello,
    I've got issue with 600-series printers. We use the latest UPD drivrer ver. 61.175.1.18849 and print from XenApp 6.5. The error occurs every time when users try to print jpg files from XenApp session. It only happens with 600 series printers and UPD.
    Also I've tried to assign native 600-series driver ver. 6.3.9600.16384 and it works good. But with that driver system says that it's color printer and it brokes our printing reports. These reports are very important for us. So we can't use printer and that driver as well.
    Printer installed on Windows Server 2012 R2. All clients are Windows 7 x64. XenApp Servers are Server 2008R2.
    Is it possible to get fixed UPD driver or correct native driver for Server 2012 R2?
    Regards,
    Anatoly

    I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial printer. You can do this at Printers - LaserJet.
    Click on New Post.
    I hope this helps.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Windows 7 displays error message when exiting +cursor issue

    Two issues here. CS5 Phoshop on Wind 7 64 bit.
    Physical processor count: 8
    Processor speed: 3073 MHz
    Built-in memory: 12279 MB
    Free memory: 9577 MB
    Memory available to Photoshop: 10934 MB
    Memory used by Photoshop: 80 %
    Image tile size: 128K
    First issue is since the latest automatic Adobe update (why fix what isn't broken?) Every time I now exit Photoshop I get the message "Adobe QT Server has stoped working" and occasionally it happens when I exit bridge. Indesign is also behaving badly. I can no longer start a previous document from file manager without ID crashing out.
    The other is the cursors in Clone and erase lose their edge (become invisable) for no reason - well not quite. Noise Ninja crashed Photoshop when I tried to use it. I reinstalled it and all is well. The cursor issue seems to be intermittant but came back (for no reason) after I reinstalled NN. I can't seem to change the cursor, no matter what I do. The problem is now seriously affecting how I work. Almost enough to go back to Win XP which ran CS5 Photoshop flawlessly.
    Any help will be gratefully accepted.
    Doug

    function(){return A.apply(null,[this].concat($A(arguments)))}
    doug87510 wrote:
    The recent problem is the entire outline of the cursor (including the crosshair in the middle) was missing at any size of cursor. All I had was exactly what I'd get if I used a real spraygun.
    Well, that issue is simply a matter of hitting the Caps Lock key.  When Caps Lock is on, you'll see the cursor outline, and when it is off you'll see a crosshair.  That's a feature, not a bug.
    Glad to hear the 11.1 drivers are out.  I will download them and try them now myself.
    Regarding "Adobe QT" crashing...  QT brings to mind QuickTime, though that is Apple, not Adobe.  Do you have Apple QuickTime installed?
    Regarding memory usage, with 12 GB of installed RAM, you should be able to set Photoshop to use 90% or more in Edit - Preferences - Performance.
    -Noel

  • Issue in Creation of Periodicals for Contracts in CRM7.0

    Hello,
    I have a requirement to create Contracts in CRM7.0 system.
    And I am doing this using the BAPI *BAPI_BUSPROCESSND_CREATEMULTI*
    Good part is Contract Order gets created, but onlywith Header Details.
    The issues i am facing --
    1. I need to know what kind/type of data must be passed to the interface parameters, the F1 Help/Documentation is vague.
    2. I am passing data in the INPUT FIELDS structure with the Object ID, Handle Number, Reference GUID and Fieldname,
        here what does 'Logical Key' field indicate? What should be passed here.
        What does 'REFERENCE KIND' field indicate, i have been passng 'A' for everything (to be frank i dont know whats its significance is!!).
    3. With so much, My Order gets created but with less than half details, i.e. the Objects not getting created are -  Partner, Product, terms/appointments, Status, LongTexts......
    Any help/inputs would be appreciated.
    Hope my problem is stated clearly ...
    --Regards
    Dedeepya

    Hi Anu,
    i found my solution by debugging with existing data or while creating it in CRMD_ORDER.
    Ensure that you are passing a correct entry in INPUT_FIELDS structure.
    As i haven't worked on rebates i woudlnt be able to help you, I suggest you debug to arrive at a solution.
    You can preset your break-points at :-
    1. FM - CRM_ORDER_MAINTAIN
    2. CRM_ORDER_MAINTAIN_MULTI_OW -- Debug through the complete FM.
    3. CRM_ORDER_PREPARE_MULTI_OW -- The data is set in this function module.
    Regards
    Dedeepya C

Maybe you are looking for