Unable to access data/storage space of failed primary partition after internet recovery

Hello,
So just a bit of quick background info to the issue: I experienced my first major failure with my iMac a few weeks ago (early Feb) where the main partition on my 3TB Fusion drive developed a corruption of some sort. I went through all the disk verification/repair procedures I could find, however nothing worked and I ended up with a grey screen on bootup that had a round logo with a slash through it. I tried a reinstall of OS X Yosemite from the recovery partition, however this failed part-way through, and I was forced to perform an internet recovery instead.
This worked, and I now have my iMAC stable again, however the recovery process created a new primary partition in addition to the old primary partition. This wasn't a major issue for me as I planned to recover some files from the failed partition that my backups had missed. Unfortunately since then, that old partition has disappeared and I can't get it back. I figure I have lost those files, but what is really annoying is the space that old partition took up has not freed up. My 3TB fusion drive is only letting me use 120GB of the space (the size of the new primary partition).
So I guess I have two questions:
1 - Is there a way to find and get the old partition back mounting again? The drives that list with a 'diskutil list; echo; diskutil cs list' command are attached, but do not appear to contain the old partition that I am after (I've tried manually mounting them via the terminal to check).
2 - If recovering that old partition is not possible, how do I go about freeing up the space it occupied?
System details:
OS X Yosemite v10.10.2
Mac (27-inch, Late 2012)
Processor: 3.4 GHz Intel Core i7
Memory: 16 GB 1600 MHz DDR3
Any assistance on this one would be greatly appreciated - I can't restore all my files from backups as I am running low on HDD space.
Cheers,
Nick
diskutil list; echo; diskutil cs list
/dev/disk1
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *3.0 TB     disk1
   1:                        EFI EFI                     209.7 MB   disk1s1
   2:                  Apple_HFS Promise RAID            3.0 TB     disk1s2
/dev/disk2
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *121.3 GB   disk2
   1:                        EFI EFI                     209.7 MB   disk2s1
   2:          Apple_CoreStorage                         120.5 GB   disk2s2
   3:                 Apple_Boot Boot OS X               650.0 MB   disk2s3
/dev/disk3
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:                  Apple_HFS Macintosh HD           *120.2 GB   disk3
                                 Logical Volume on disk2s2
                                 B1226A78-ED30-4C0E-B398-216050D00D99
                                 Unencrypted
CoreStorage logical volume groups (1 found)
|
+-- Logical Volume Group 776BF278-C2A1-4AE9-A333-54698D103F63
    =========================================================
    Name:         Macintosh HD
    Status:       Online
    Size:         120473067520 B (120.5 GB)
    Free Space:   0 B (0 B)
    |
    +-< Physical Volume 9E51C38B-4FFA-412E-BDD5-3454C7A54658
    |   ----------------------------------------------------
    |   Index:    0
    |   Disk:     disk2s2
    |   Status:   Online
    |   Size:     120473067520 B (120.5 GB)
    |
    +-> Logical Volume Family 6BCF921C-0CAF-4567-88C1-9EF69D4D8D17
        Encryption Status:       Unlocked
        Encryption Type:         None
        Conversion Status:       NoConversion
        Conversion Direction:    -none-
        Has Encrypted Extents:   No
        Fully Secure:            No
        Passphrase Required:     No
        |
        +-> Logical Volume B1226A78-ED30-4C0E-B398-216050D00D99
            Disk:                  disk3
            Status:                Online
            Size (Total):          120154292224 B (120.2 GB)
            Conversion Progress:   -none-
            Revertible:            No
            LV Name:               Macintosh HD
            Volume Name:           Macintosh HD
            Content Hint:          Apple_HFS

Hi Eric,
See attached screen shot - is that what you are after?
As you can see I don't have access to the rest of the 3TB fusion drive. I'm thinking I may have to do a clean OS install so I have prepared a Yosemite USB install key ready to go.
Unless you guys can suggest something that is.
Thanks in advance for your help,
Nick

Similar Messages

ADI0052E: TSM API Error: ANS1311E (RC11) Server out of data storage space

Hello guys,
I have a problem with the backup on MaxDB. It always fails with the following error message
ADI0052E: TSM API Error: ANS1311E (RC11) Server out of data storage space
Has anyone faced this problem before? Any solution how could this be solved?
Thanks for your help.
Regards,
Dan

Hi Dan,
Check the TSM server and make sure the primary storage pool that is defined
as your copy destination for the management class you are using is not full
and or you have not run out of scratch tapes. In either case a storage pool
has filled up and cannot migrate data causing the RC11. This is usually what
an RC11 Server out of data storage space means.
I am sharing configuration for Oracle database. You can check similar configuration for MaxDB database.
when i defined the node in my tsm server :
REG NODE hostname_oracle password maxnummp=2, it was defined in standard storage pool, i moved it in other storage.
Hope this is useful.
Regards,
Deepak Kori

Treo 755p The free data storage space on the device is low. Some data could not be saved

After having the Treo 755p device for only a week, I am receiving a message "The free data storage space on the device is low. Some data could not be saved." I have over 55 mb of free space according to the device info page. I cannot find anything about this in the knowledge library, can anyone offer help?
Post relates to: Treo 755p (Sprint)
Post relates to: Treo 755p (Sprint)

My problems are similar to Lauren, but backwards. For months now I have had problems with my Treo 755 reseting randomly. Sometimes during calls, sometimes while typing, sometimes while just sitting in the holster. As many as a dozen a day and then not at all for 2 weeks, no rhyme nor reason. This Free Space error though is brand new to me today and quite strange. The error is showing up when I bring my phone out of "sleep". I press the end button to sleep the phone and everything is fine. When I press it again to wake the phone up the error is sitting behind the keylock waiting for me.
Obviously I have done nothing yet for this new memory error, but I've tried everything for the reseting. Deleting software, Soft and hard resets, software updates, everything I and Sprint support can think of. With this new Free space error now I am going to just take it to a service center and demand a new phone. I think there is some kind of hardware error as I have done nothing in the programming. No new programs, no deleted programs, no changed settings.
I loved my Treo 650 and never had any problems with it. I am getting very disappointed in Palm now though with these ridiculous problems.
Post relates to: Treo 755p (Sprint)

Can a PPC access data/docs saved on a GUID partition?

Using my G4, will I be able to access data/docs saved on a GUID partition on an external HD (connected via firewire or USB, it matters not to me)?
Can I save to a GUID partition from the G4?
When I partitioned the HD I needed one of the 4 partitions to be GUID. I couldn't manage to make the other 3 partitions be anything else - if I changed one from GUID, it changed them all. So, I have 4 partitions all GUID.
Thanks,
Mrs H

Niel wrote:
Using my G4, will I be able to access data/docs saved on a GUID partition on an external HD
Only if the G4 is running Mac OS X 10.4 or newer or the external drive is shared over a network.
Can I save to a GUID partition from the G4?
See above.
The G4 is running Tiger 10.4.11 (no network involved) so it looks like a Yes to both my questions.
Thanks - so I can proceed as planned...
Do you know, was there a way to partition the external so that not all 4 partitions were in GUID (not that I'm going to repartition, just curious if I was doing something else would it have come out differently?)
Mrs H

ANS1329S (RC29) Server out of data storage space

Hi
I got the error message below. How do i resolve.
thanking you for your anticipated responses
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of backup command on p1 channel at 10/12/2007 00:35:17
ORA-19502: write error on file "alcrm_635733077_24748_1", blockno 40520705 (bloc
ksize=512)
ORA-27030: skgfwrt: sbtwrite2 returned error
ORA-19511: Error received from media manager layer, error text:
ANS1329S (RC29) Server out of data storage space

You cannot expect, that everyone here knows TSM (this is an Oracle,not an IBM forum), so it would be great to give some more informations about your environment.
Message (ANS1329S) is clear, TSM server is out of space. Storage pools may be exhausted or no more tapes available. This is not an Oracle/RMAN issue, you have to contact the person(s) responsible for your TSM environment.
Werner

TS3992 My Icloud back up shows huge amount of data stored from back up yet listed as incomplete. Unable to access data. Is data lost

My ICloud backup shows a huge amount of data stored, yet it is listed as incomplete backup. I am unable to access the backed up data. Is the data lost?
Thank you in advance for your assistance.

Unfortunately, if an iCloud backup is incomplete you can't access any of the data in it. The only way to access anything in the backup is to restore the entire backup, which can't be done if it is incomplete.

Unable to access data returned by EJB

Hi,
One of my EJB method(getHeaderInfo) returns string array (String[]). In the WSDL, I have following entries -
<complexType name="GetHeaderResponseType">
<sequence>
<any/>
</sequence>
</complexType>
<message name="GetResponseMessage">
<part name="header" type="tns:GetHeaderResponseType"/>
</message>
<portType>
<operation name="getHeaderInfo">
<input name="GetHeaderInfoRequest" message="tns:GetHeaderRequestMessage"/>
<output name="GetHeaderInfoResponse" message="tns:GetHeaderResponseMessage"/>
<fault name="GetHeaderInfoException" message="tns:ExceptionMessage"/>
</operation>
</portType>
<binding name="EJBBinding" type="tns:Data">
<ejb:binding/>
<format:typeMapping encoding="Java" style="Java">
<format:typeMap typeName="xsd:string" formatType="java.lang.String" />
<format:typeMap typeName="xsd:boolean" formatType="boolean" />
<format:typeMap typeName="tns:ExceptionType" formatType="java.lang.Exception"/>
<format:typeMap typeName="tns:GetHeaderResponseType" formatType="java.lang.String[]"/>
</format:typeMapping>
<operation name="getHeaderInfo">
<ejb:operation
methodName="getHeaderInfo"
parameterOrder="filepath filename" interface="remote" returnPart="header"/>
<input name="GetHeaderInfoRequest"/>
<output name="GetHeaderInfoResponse"/>
<fault name="GetHeaderInfoException"/>
</operation>
</binding>
When I execute the process I get following data in the output variable -
<header >
<header xmlns = "http://callhome.pillardata.com/" >
<string xmlns = "http://www.w3.org/2001/XMLSchema" >
1 </string>
<string xmlns = "http://www.w3.org/2001/XMLSchema" >
BrickFlashDataRecord </string>
<string xmlns = "http://www.w3.org/2001/XMLSchema" >
IDcbefc68f </string>
<string xmlns = "http://www.w3.org/2001/XMLSchema" >
A001439BGX </string>
<string xmlns = "http://www.w3.org/2001/XMLSchema" >
2005-12-14T18:00:20-08:00 </string>
</header>
</header>
However I am not able to access data using XPath. Please suggest the proper way to write the WSLD and how to access the returned data in BPEL. Please let me know if further information is required.
Thanks,

Hi Justine,
I think you will have to look at the access restrictions on the Universe Folder and the Report itself, in the CMC. It would appear that your security rights did not migrate successfully.
Regards
Alan

Storage Spaces vs Plain-Old-Partitions on single-spindle 300GB drive

When I originally installed my first WS2012 system (running WSUS, DHCP, WDS), I created simple volumes on the drive as I've always done. OS is installed on a 150GB drive, and I have a second 300GB drive that's providing storage for WSUS, WDS, and who knows
what else I'll do with the 70% of that drive that WSUS/WDS will never use.
I'm familiar with the concepts and intents for Storage Spaces, but is there any compelling reason to use Storage Spaces on a single-spindle drive? If not, then I'm happy to just leave it as it is and invest my time in other endeavors.
Lawrence Garvin, M.S., MCITP:EA, MCDBA, MCSA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2013)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence R Garvin
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

When I originally installed my first WS2012 system (running WSUS, DHCP, WDS), I created simple volumes on the drive as I've always done. OS is installed on a 150GB drive, and I have a second 300GB drive that's providing storage for WSUS, WDS, and who knows
what else I'll do with the 70% of that drive that WSUS/WDS will never use.
I'm familiar with the concepts and intents for Storage Spaces, but is there any compelling reason to use Storage Spaces on a single-spindle drive? If not, then I'm happy to just leave it as it is and invest my time in other endeavors.
If you'd create Spaces with redundancy (mirror or parity) and use ReFS on top you'll have much more stable config. Classic LVD + NTFS are not capable of handling anything related to silent data corruption (if SCSIOP_READ10 completed OK storage stack will
think read is OK and NTFS has no mechanism to check for data integrity either). SS + ReFS will both detect and try to fix the error a) mapping new block and b) relocating data using alive content. That's in theory :)
StarWind iSCSI SAN & NAS

Unable to access Yahoo Mail on iPad 2 Safari App after upgrading iOs 6

I recently upgraded to iOs 6 on iPad 2 device but after installing I'm unable to access Yahoo Mail on Safari App. It let me logged in on my Yahoo account but once I click on Mail icon it tries to download email messages but logs me out after few seconds and then prompts me to re-enter passowrd. I re-enter password and was authenticated and it try load email messages again but logs me out again and goes same loop over and over. Any help would be glady appreciated. Thanks

I too have the same problem since yesterday. I am unable to acess my yahoomaill still. Please help. I already done the suggestions here but to no avail. Is this a serious problem ? Thanks.

Help unable to install OS X as hard drive not visible in internet recovery mode

Hi
I have a MacBook Pro
During use my screen froze and I had to force quit. Since then I have tried the following:
Turning on in safe mode
Internet recovery - no mac hd or partition recovery drive are visible in disk utility only OS X base system
Unable to install maverick as there's no disc visible to select
If I try to verify the start up disc is greyed out
Starting up with cmd r
Tried to reset PRAM
Start up disc does not display anything
ALL TO NO AVAIL, is the hard drive defunct or is there anything else I can try ?
Many thanks for your help
Elie

See this thread, this is 3rd regarding recovery/restore - as a starting point.
Obviously it is easier if you have a couple backups, a drive you can use, and don't mind erasing the internal drive.
It is a lot easier then. And it would be easier if you didn't have a notebook. This forum is not MacBook Pro but the tower or workstation.
https://discussions.apple.com/message/25145113?tstart=0#25145113

TS3926 Unable to reinstall Mac OSX Lion after internet recovery

Sequence of Events on My Macbook Air
1. I saw a flashing question mark in the morning on starting my macbook air
2. I then tried the internet recovery of my Macbook air
3. The system took me to a recovery partition where my only option was reinstall the OSX lion
4. I tried following the system till the Mac OSX lion disk selection
5. I do not see any disk to select and hence cannot proceed.
Any pointers? Is my hard disk gone for good?
Please advice Urgent!!!!

It's possible that the flash storage is damaged, but first, see if it's working properly. After starting in Internet Recovery, open Disk Utility and tell me if you see Macintosh HD in the sidebar. If so, go to Macintosh HD, open Erase tab and erase the disk. Finally, close Disk Utility and reinstall OS X.
If you don't see it, see if the flash storage appears at the top of the sidebar. If so, choose it, go to Erase tab and erase it. Then, reinstall OS X.
If you don't see the flash storage in Disk Utility or your Mac is in warranty, take it to an Apple Store or reseller

Unable to Access Data Form with Users Provisioned as 'Planner'

Hello,
I am currently experiencing an issue that I can't seem to resolve. I was hoping someone else might have some insight and/or have come across this issue.
I created two data forms. Users have been assigned permissions to the dimensions included in the data form. I have also assigned users access to the data form. The model is a single currency model.
Upon logging into the application, the user is unable to open the data form unless he/she is provisioned as an 'Administrator'. Provisioning the user as a 'Planner' or 'Interactive User' does not allow the user to open the data form. The following message appears:
*"Security and/or filtering has resulted in a required dimension not being represented on this data form."*
My data form uses the following dimensions:
POV: ELEMENT
PAGE: SCENARIO, YEAR, VERSION, ENTITY
ROWS: ACCOUNT
COLUMNS: PERIOD
We are currently implementing Hyperion Planning 11.1.2.0. The operating system is Windows Server 2008 64-bit R2.
Any advice/suggestions on how to resolve this would be greatly appreciated. Thank you.
Corey

I went ahead a created a data form that just used level 0 members and confirmed that the user had access to the members defined in the form. Still no luck.
I also checked to make sure the filters existed in Essbase. Here is what I found in Essbase:
Access: None
Member Specification: @IDES("Account"),@IDES("Scenario"),@IDES("Version"),@IDES("Entity"),@IDES("NTTA_ELEMENT")
I have no issues accessing the data through the Essbase Add-in.
I did notice some additional items in my Planning setup:
1. Task>Manage Process - Sub-Status states 'Failed' when I attempt to validate
2. Task>Manage Process - Status changes from 'Not Started' to 'Under Review' when I start the cycle.
3. Dimension Security - Users are attached to a group that has write access at the Descendent(Inclusive) level.
4. In the Account, Department, Scenario and Version dimensions I also setup the user to have write access at the member level.
As for my earlier post with the data forms, that was just my way of showing the dimensions used. I do have two data forms, 1) with top level and descendants/children and 2) with level 0 members only.
I checked the logs and there isn't really much info there. I have a case open with Oracle and a webex scheduled for tomorrow.
Thoughts?
Thanks
Corey

Unable to access files with spaces in the path

Hi all, I am accessing files which reside on the server using a java applet.
The typical path of a file could be:
http://192.168.0.2/agat/data/AF190701 0003.agt
(not the space in the filename).
When I try to open this file using a URL object:
URL file = new URL(filename);
BufferedReader in = new BufferedReader(new InputStreamReader(file.openStream()));
I get exception 400 ( I think) whihc I assume is file cant be found.
However when I rename the file (to get rid of that space) and also change the filename variable to suit. The file is opened as expected.
What should I do to make the applet able to open paths with spaces? Or is this just not possible.
I did try including quotes with the special characte precessor:
filename = "/"http://192.168.0.2/agat/data/AF190701 0003.agt/""
But this didnt work either, please could someone tell what I need.
Thanks.

Thanks guys, although before I got your replies I did the following - it seems to work, but shall try your suggestions.
while (file.lastIndexOf(" ") >0)
String temp;
int num = file.lastIndexOf(" ");
temp = file.substring(0, num) + "%20" + file.substring(num+1, file.length());
file = temp;
}

Unable to access data downloads-need to read javascript/active x

I UPDATED THE GRAPHICS DRIVER TO ENABLE DATA DOWNLOADS but I am unable to open files. The reason given was"this file requires your computer to read javascript?active x".
What more can I do? I need to access these files!!!!!

Firefox doesn't do ActiveX. <br />
https://support.mozilla.com/en-US/kb/ActiveX

Unable to access data after running disc repair

I ran disc repair today as there is a problem with the hard drive. On restart the computer is displaying a login page. I have never had to login and now I cannot access any of my files or applications. How can I access my data?

Jugnu, welcome to Apple Discussions.
You posted in the Older Apple Hardware forum, but you have a relatively new Mac and are using Panther. Suggest you repost in the Panther forum at http://discussions.apple.com/forum.jspa?forumID=745
 Cheers, Tom

Unable to access data/storage space of failed primary partition after internet recovery

Similar Messages

Maybe you are looking for