Unable to access personal web hosting on Mac OS 10.4.11

I can't get personal web sharing to work. If I set personal web sharing on in the control panel, it reports an IP address of 10.1.1.4, which clearly isn't my inTERnet address. This is also what I see in the Network control panel. If I head to whatismyip.com or the like a get a sensible IP address. However if I try access using this IP address, it doesn't work either. Pinging doesn't work. So what the heck is going on? This used to be trivial, just click personal web sharing on, note the IP address and away you go. I haven't changed ISPs either.
Is 10.4.11 broken for networking in some way?
Is there some other setting I need to switch on?
This isn't really relevant, but for those you like more details: I am trying to move a file from my machine to another my logging on to the remote machine (Linux) and using lftp http://<address>/~username/ to get around ftp being off on the remote machine without putting ftp on the Mac. I need this right now really, so naturally it annoys me that what was once trivial is now behaving weirdly.

re "Apple should have the control panel report the proper IP address"
On clicking Personal web sharing, you get information to the effect:
View this computer’s website at http://10.1.1.4/ or your personal website at http://10.1.1.4/~user/
This is wrong to a user. Others could not enter this URL and get access to the website using this information. This is what I meant by "wrong"--its NOT the IP address that the user should use to view/use the web site. The software already knows its using DHCP, etc., so it should know to present the modem's IP and from memory in the past it did. As a wrote earlier, I used to be able to just copy the IP address given.
What Apple probably need are two statements:
To view this computer’s website from the local network use ...
To view this computer’s website from the internet use ...
Even, then I'd question the use of 10.1.1.4.

Similar Messages

  • Unable to access SRP521W Web Management

    Just brought another set of SRP521W, after changed the WAN setting to PPPOE, we unable to access the web management. The power/sys light will keep blink when trying to access the web management. We able to ping it. We tried the reset button but it did not work as well. Anyone has a solution? Is that a way to upgrade the firmware without using the web management?

    Good morning Winston, I apologize for the issues you are having, in order to resolve your problem in a  faster way, you could contact our support team and explain them your problem, it looks like a hardware problem.
    https://www.cisco.com/en/US/support/tsd_cisco_small_business_support_center_contacts.html . I encourage you to share the answer with us. Thanks, and again I apologize with you.
    *Please mark the question as Answered or rate it so other users can benefit from it"
    Greetings,
    Johnnatan Rodriguez Miranda.
    Cisco Network Support Engineer.

  • Web hosting using Mac Pro

    I want to run a website and wondered if any of you could recommend a web hosting services in the UK that supports Mac OS X.

    However their web hosting software packages are not compatible with Mac OS X so i'm not sure what else I would need?
    Eh?! I've never come across a hosting account that wasn't compatible with Mac OS X. All hosting accounts use standard protocols to access your space, ftp/http etc, which makes them universally compatible and in turn, not OS specific.
    The only reason I mentioned MS accounts is the fact that their web servers sometimes require slightly different coding which can be a pain if you don't know what you're looking at.
    Could I use webspace provided by my ISP?
    You could do that too.

  • Since switching to Firefox 4 I'm unable to access a web page by pressing "Enter" after typing the url in the address bar; I now have to click on the bar; how do I change things so that I can go back to a keyboard shortcut?

    I use keyboard shortcuts whenever possible but since updating to Firefox 4 I can no longer access a web page simply by pressing "Enter" after typing the url in the address bar. Can I get back to this useful shortcut somehow and avoid having to fiddle with a mouse?

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    * Don't make any changes on the Safe mode start window.
    * https://support.mozilla.com/kb/Safe+Mode
    If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
    * Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
    * Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
    * [[Troubleshooting extensions and themes]]

  • Web host for mac

    I want to create a website and purchase a domain name from either yahoo small business or godaddy but after reading a lot of replies here i see that it must be a big hassle and often does not work. If anyone could explain the process as far as what it would take to get a site up and running. thank you

    What you have for a computer or operating system makes no difference. Web hosting is web hosting. Compare what you get for $99 a month from machost ...
    http://www.machost.com/mysql_hosting.html
    ... to what you get for $5 a month from bluehost ...
    https://www.bluehost.com/tellmemore.html
    ... and I think bluehost wins big. Even if they cost the same. Google 'web hosting' and notice that about half of the most popular hosting companies offer similar packages at similar rates. The steps to set yourself up are pretty simple.
    1. Whip out your credit card and open a web hosting account.
    2. Domain registration is part of the sign up process.
    3. Add your file called index.html to the document root of your web host.
    All of these packages allow you to log in to a control panel that lets you set up email accounts, ftp accounts, additional domains, and more. From its control panel, bluehost lets you create what they call 'web disk accounts' so your web space can be a secure mounted network disk on your Mac. Updating your web site is as easy as copying files from one directory to another on your machine.
    Do NOT use iWeb! It is a very simplistic program designed to get you to sign up for mac.com web hosting. I grew tired of looking for what they charge after the free trial expires. I'll bet that like machost, it's a lot of money for a little web space. Google 'free html editor mac' and anything you find will probably be suitable. I use one called NVU.
    It should take less than an hour to set up a hosting account, register your domain, set up a few email accounts, create a web disk account and copy over a simple static web site. The whole deal should cost about $130. That covers hosting for two years and the first year of your domain name. You will have to renew your domain name for another $10 after a year.
    Perhaps your first domain name is included in the deal now, so it might be only $118.80 for two years and one domain. I've been using bluehost for over a year with no gripes, except that because the price has dropped, I may be getting screwed on the deal for as much as $35 a year. They seem to have lifted their 300Gb disk and 3000Gb monthly transfer limits too.

  • I can't download movies.  I'm taking a cinema class where the professor provides a link to to a movie to be watched.  I am unable to access the link on my mac pro.  is there an app or software download that will allow me to do this?

    I can't download movies.  I'm taking a cinema class where I am required to watch movies.  My professor provides the link on an electronic blackboard for the movies.  I can't access the link on my mac pro notebook.  Is there an app or software download that can help with this?  I can access the link fine on a pc.

    The "right click" is a function of the OS and those keyboard commands do not work on the iPad at all with the built in virtual keyboard. I don't use an external keyboard - so I cannot attest to the possibility of that working - but there are no keyboard shortcuts with the iPad keyboard.

  • Unable to access certain web servers after creating time capsule network

    Since creating a home network with Time Capsule, there are certain web sites or servers that I am unable to connect to. The browser attempts to connect, but always gets timed out.
    One site, for example is a link from my fantasy football homepage: football30.myfantasyleague.com
    I have no trouble with any other site, and am able to get to the address above if I connect my Mac directly with the Cable Modem, thus bypassing the time capsule network. Also, if I use my old wireless router, I am able to access the address without problem. I am also able to ping the address on my time capsule network,
    I've tried accessing this site on multiple computers (both mac and pc) through my home network and using multiple browsers (Firefox, Safari, and IE). So the problem must lie with some time capsule setting (some kind of default firewall). However, I cannot find any setting on Time Capsule or Airport utilities where I could make any adjustments or view any prohibited site access.
    Does anybody know why this particular site is constantly blocked when I use the Time Capsule as my router?

    hamish,
    Welcome to the Apple Discussion!
    I'm wondering if either or both Airport Utility & Network Prefs have proper DNS server settings. Try this
    Launch Airport Utility.
    Select TC on left.
    Click "Manual Setup".
    Select "Internet" from the toolbar above.
    What's listed for "DNS Server(s):"?
    Try putting in these servers from OpenDNS [http://www.opendns.com>
    208.67.222.222
    208.67.220.220
    Click "Update".
    Your TC will restart with the new settings.
    Next, launch System Prefs --> Network Prefs.
    Select the service you usually connect with on the left (Airport or Ethernet).
    Then click, "Advance..."
    Click the "DNS" tab.
    What's listed for "DNS Server(s):"?
    Usually "10.0.1.1" will be listed first in gray. This refers back to the settings in the Airport Utility.
    Nevertheless, it doesn't hurt to add the DNS servers noted above here as well.
    Click "OK" then click "Apply".
    Now see if you can access those websites again.
    Cheers!
    Message was edited by: Glenn Carter

  • Unable to access java web application index page on Weblogic server 10.3.6

    Hi,
    I have deployed a Web application on Weblogic server.
    My war file is very basic with just a index page.
    I am able to deploy & access its index page properly in OC4J ( applicaton server on soa suite 10g ) and apache tomcat.
    But when i deployed same war file in weblogic am not able to access its index page, Getting below error:
    Error 503--Service Unavailable
    From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
    *10.5.4 503 Service Unavailable*The server is currently unable to handle the request due to a temporary overloading or maintenance of the server. The implication is that this is a temporary condition which will be alleviated after some delay. If known, the length of the delay may be indicated in a Retry-After header. If no Retry-After is given, the client SHOULD handle the response as it would for a 500 response.
    status=Prepared, Consolidated State=Prepared, Target-Specific State= Prepared.
    what does Prepared indicates here?*
    Adminserver.log prints blow log when i try to access the index page
    ####<Dec 26, 2012 8:27:17 AM GMT> <Warning> <netuix> <soa-app-dev-01.am.health.ge.com> <AdminServer> <[ACTIVE] ExecuteThread: '21' for queue: 'weblogic.kernel.Default (self-tuning)'> <501226496> <> <9b375c7445d8c121:79ee4f70:13bc880be7a:-8000-0000000000000209> <1356510437306> <BEA-423420> <Redirect is executed in begin or refresh action. Redirect url is /console/console.portal?_nfpb=true&_pageLabel=WebAppApplicationOverviewPage&WebAppApplicationOverviewPortlethandle=com.bea.console.handles.AppDeploymentHandle%28%22com.bea%3AName%3D*Weblogs*%2CType%3DAppDeployment%22%29.>
    My Deployment descriptors are as below:
    Web.xml
    <?xml version="1.0" encoding="UTF-8"?>
    <web-app xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns="http://java.sun.com/xml/ns/javaee" xmlns:web="http://java.sun.com/xml/ns/javaee/web-app_2_5.xsd" xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-app_2_5.xsd" id="WebApp_ID" version="2.5">
    <display-name>Weblogs</display-name>
    <welcome-file-list>
    <welcome-file>index.html</welcome-file>
    </welcome-file-list>
    <servlet>
    <description></description>
    <display-name>SOA11gLogServlet</display-name>
    <servlet-name>SOA11gLogServlet</servlet-name>
    <servlet-class>com.ge.healthcare.soa.logs.SOA11gLogServlet</servlet-class>
    </servlet>
    </web-app>
    ==================================================================
    weblogic.xml
    <?xml version="1.0" encoding="UTF-8"?>
    <wls:weblogic-web-app xmlns:wls="http://xmlns.oracle.com/weblogic/weblogic-web-app" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-app_2_5.xsd http://xmlns.oracle.com/weblogic/weblogic-web-app http://xmlns.oracle.com/weblogic/weblogic-web-app/1.3/weblogic-web-app.xsd">
    <wls:weblogic-version>10.3.6</wls:weblogic-version>
    <wls:context-root>/Weblogs</wls:context-root>
    </wls:weblogic-web-app>
    ==================================================================
    Please help me to resolve the issue,its bit urgent.Let me know in case of anything else required to check and verify.
    Thanks in advance.
    Regards,
    Rahul Aahir
    Edited by: 978673 on Dec 26, 2012 4:22 PM
    Edited by: 978673 on Dec 26, 2012 4:32 PM

    In weblogic 10.3.6, when you deploy using console, you have to click on start button which appears in Deployments page.
    Your weblogic.xml file should be as below:
    <?xml version="1.0" encoding="UTF-8"?>
    <wls:weblogic-web-app xmlns:wls="http://xmlns.oracle.com/weblogic/weblogic-web-app" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-app_2_5.xsd http://xmlns.oracle.com/weblogic/weblogic-web-app http://xmlns.oracle.com/weblogic/weblogic-web-app/1.3/weblogic-web-app.xsd">
    <wls:weblogic-version>10.3.6</wls:weblogic-version>
    <wls:context-root>/logs</wls:context-root>
    <container-descriptor>
    <index-directory-enabled>true</index-directory-enabled>
    </container-descriptor>
    <virtual-directory-mapping>
         <local-path>/opt/oracle/logs</local-path> (as per your path)
         <url-pattern>/logs/*</url-pattern>
         <url-pattern>*.log</url-pattern>
    </virtual-directory-mapping>
    </wls:weblogic-web-app>

  • Unable to access webmail in browser and Mac Mail

    I am a Mac convert from PC and I love my Macbook Pro with Retina display that came with Mountal Lion. Until recently after my visit overseas, I am neither able to access my ISPs webmail through Safari or Firefox on my laptop nor through Mac Mail app with unchanged settings provided by Road Runner, such as webmail.kc.rr.com, apop-server.kc.rr.com/smtp-server.kc.rr.com/110/25. Safari is too slow and hangs with connection errors for webmail. My ISPs id is my business id I use as I travel overseas constantly. I spent several hours and had my spouse call in local tech support and it is a pain having to call your spouse to login and forward email to a public email. Any help is appreciated as my ISP has been anything but helpful in resolving this issue blaming the OS.

    Thanks for your reply, Sig. I spent over three hours with my ISPs support tech, deleted and added my account, and even rebuild was of no avail. From Terminal, I am able to ping and I get an IP address but when I try connecting to webmail server, the browser returns an connection error, in Mac Mail I get the following message,
    "Unable to receive Mail -
    There may be a problem with the mail server or network. Verify the settings for account “Road Runner” or try again.
    The server returned the error: The connection to the server “pop-server.kc.rr.com” on port 110 timed out." The tech asked me to check with the local ISP who directed me to ask Road Runner to clear the block off SMTP port.
    I have not used mail2web until now, but would give it a try if it resolves my issue. Thanks for your help and assistance.

  • I am unable to access mail folders on my mac from my iPad: is this s settings issue?

    I keep a selected number of incoming e-mails in subject specific folders on my Mac for future reference. I am able to access all incoming e-mails on both my Mac and my iPad but these mail folders only on my Mac. If this is a settings issue, can anyone advise me how to correct the issue?

    If you are using a POP type email account, no, those folders would not transfer over. They only exist on your Mac.
    If you are using an IMAP type account, it is still possible you created the folders locally on the Mac rather than on the server. You may need to recreate them and then move emails over to the new folders.

  • For the past week I am unable to access the web using firefox even after downloading it again, why?

    When I click on the firefox icon it was not opening up or it would open then say unable to make connection. I had no problem using Internet explorer. So I thought I should download Mozilla firefox again and I did. It seemed to be functioning but then reverted back to nonresponsive. I am able to contact you using internet explorer. What can i do?

    A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
    Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
    See:
    *https://support.mozilla.com/kb/Server+not+found
    *https://support.mozilla.com/kb/Firewalls

  • My old Mac crashed and I am unable to access the app on new mac

    How do I access the creative clouds apps downloaded from my old Mac?

    >downloaded from my old Mac?
    Mac Migration and Time Machine DO NOT WORK with Cloud program activations due to hidden files
    Sign out of your account... Uninstall... run the Cleaner...
    -http://helpx.adobe.com/creative-cloud/help/install-apps.html (and uninstall)
    -using the cleaner after uninstalling and before reinstalling is needed
    -https://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html
    -Restart your computer... Sign in to your account... Reinstall

  • ACE unable to access through web browser.

    Hi Team,
    We have 4710 ACE in our network and currently we are using software version A3 2.0.
    Currently we are not able to access the ACE through web interface but Telnet is happening properly. Connection is establing while we are doing the telnet to ACE through port 80 and port 443. Kindly suggest what will be the Issue? Please find the below dummy configuration.
    resource-class SLB_STICKY
      limit-resource all minimum 0.00 maximum unlimited
      limit-resource sticky minimum 10.00 maximum equal-to-min
    access-list ANY_Traffic_Permit line 8 extended permit ip any any
    access-list ANY_Traffic_Permit line 16 extended permit icmp any any
    class-map type management match-any CM_Remote_MGMT
      description *** Class-Map defined the permitted Protocol list for Remote Management ***
      201 match protocol icmp any
      202 match protocol telnet any
      203 match protocol http any
      204 match protocol https any
      205 match protocol snmp any
    policy-map type management first-match PM_Remote_MGMT
      description *** Policy-Map defined the permitted Protocol list for Remote Management ***
      class CM_Remote_MGMT
        permit
    interface vlan 60
      ip address 10.160.7.3 255.255.255.0
      alias 10.160.7.2 255.255.255.0
      peer ip address 10.160.7.4 255.255.255.0
      no normalization
      no icmp-guard
      access-group input ANY_Traffic_Permit
      access-group output ANY_Traffic_Permit
      service-policy input PM_Remote_MGMT
      no shutdown
    Thanks in advance..
    Regards,
    Ranjith

    Hi Ranjith,
    I dont see any problem with the config as per the doc.
    http://www.cisco.com/en/US/docs/app_ntwk_services/data_center_app_services/ace_appliances/vA3_1_0/configuration/quick/guide/setup.html#wp1010367
    What browser are you using? Did you atleast get a message to accept the SSL certificate as trusted when you access https://10.160.7.3
    Regards,
    Siva

  • My Web address bar is missing, Unable to access the web

    I am unable to type web addresses as the bar has disappeared

    For details of how to restore missing items from the toolbars, see [[back and forward or other toolbar items are missing]].

  • Web hosting for Macs

    I have gone from bad to worse in having my websites hosted.
    Can anybody recommend a reliable hosting service ideally specialized in Macs?
    Thanks a lot in advance,
    Luigi

    maybe
    h t t p : / / w w w . m a c m i n i c o l o . n e t /

Maybe you are looking for