Unable to adjust voltage past 1.6v on KT3 Ultra2-R
currently i've got an XP1700+ AIUGA running at 2100+ on a KT3 Ultra2-R but for some wild reason cannot get the voltage to go beyond 1.475-1.6. the chip has the L11 bridges cut to 1.5 but that should not impede this. anyone with any ideas who could through in some info on this i'd really appreciate it.
Cen [rOB]
a new cpu (now only a XP 1800+) took me one step ahead: windows xp is now coming up with a message (white on black) saying that the system tried starting unsuccessfully last time. then there is a choice how to boot now. but even if i choose "safe mode", the pc is booting again...
also, i cant get the floppy to work. in bios, the mobo says, its an 1,44 flopp (correct) but i dont get it in the boot order or boot menu.
so i cant install windows new, because raid-drivers are on the boot disk X(
another hard disk with installed windows xp also comes up the the scrren mentioned above and then hangs with a cursor blinking in the left top cursor of the screen.
i tried another graphic-card: an old "Interactive 3dfx Magix Twin Power": the pc beeps once long an then 3 times short on power on but keeps on booting.
the result is the same as above (pc hangs).
very, very strange
Similar Messages
-
Adjusting Voltage after 1.3 Bios update
Hello, my system specs:
P7N Diamond NVIDIA 780 SLI chipset
Intel Q6600 Quadcore CPU
850 watt PSU
4gb OCZ DDR2 PC2-8500
I just updated to the lastest BIOS version 1.3. However, ever since making that update, I have been unable to adjust any voltage in my BIOS. They are all locked in Auto and greyed out. Is there anything I can do to unlock my voltage settings so I manually configure them again?Use -/+ NumPad keys or "PageUp/PageDown"
-
Greetings. I just installed a fresh new copy of Windows XP Professional-- and decided it was a good idea to upgrade from my Li've! value from 999 to a better sound card...At least so?I hoped. I purchased this card from Wal-Mart the other night, and if it's anything like the other sound cards purchased at mega-retailers, I am going to be in for a huge headache, aren't I?Anyway, to the point:? When I run creative diagnostics, both the left, and the right channel, come out of the left and right, and right and left channel, respecti'vely... I can take one ear off left, and hear "left channel" in my right channel, and vice versa. Problem #2: I am unable to adjust my bass or my treble on the sound card. I checked the FAQ, but I didn't see anything terribly relevant, unless of course I am just blind. I look forward to any help I can get from you great peoples. Thank you for reading my message. SkylerakaJaldarith
What about the inability to adjust bass and treble? I google'd a bunch of different phrases about Audigy SE cards, and it seems they don't have that functionality. Am I missing something here?I installed the EAX control panel and that didn't help. Edit: Okay, so the left and right channel part is my problem-- but I have a headset by Sennheiser that has such a small headphone jack, it has to be halfway plugged into the sound card, in order for me to get full audio. I'll see if I can get that taken care of. The bass and treble still bother me though. Message Edited by Jaldarith on 2-07-200605:5 PM
-
Unable to copy and paste code or text in the post
hi
i am unable to copy or paste the code or text from my notepad/word to this editor when i am trying post questions etc.
is this feature blocked my MS ?
If i add a html code windows , i am able to paste the code and text. can anyone pls confirm why they have removed copy-paste operations from the normal windowDid you try to paste by right-clicking or by typing Ctrl + V ?
Sometimes the former doesn't work but the latter works. -- My own experience.
Alexis Zhang
http://mvp.support.microsoft.com/profile/jie
http://blogs.itecn.net/blogs/alexis
| i am unable to copy or paste the code or text from my notepad/word to this editor when i am trying post questions etc. -
I am unable to copy and paste text from mozilla, clipboard error
Hi-
It seems I am suddenly unable to copy and paste anything from mozilla into other text editors (word, wordpad, notepad).
I am unable to use ctrl c or v, when trying to do Edit-copy or paste it seems as though nothing is "recognized" by Mozilla.
I'm using a netbook running Win7.
In an effort to fix this problem I restarted firefox, started in safe mode, disabled all plugins, returned to default settings, and have done basically everything except for uninstalling and reinstalling.
Are there suggestions? I looked in older posts, but I also do not have the pushow.dll(or something like it) or the new.net(or comparable) malware so I cant get rid of that either.
Any help is greatly appreciated!
KyraFirefox button > Web Developer > Error Console or {Ctrl + Shft + J} from the keyboard
Do you have any messages relating specifically to that error? <br />
You can right-click a message and use Copy to get that message into the clipboard - and then Paste it here. (If that works.)
Beyond that, try a new Profile (don't Delete your current Profile). <br />
http://kb.mozillazine.org/Creating_a_new_Firefox_profile_on_Windows -
Unable to copy and paste a phote from my photo library to another photo album
iphoto 6.0.6 unable to copy and paste a photo from my main library album to another photo album. why does the copy and paste function not work for these albums. I have tried to drag it and drop it into the album, but nothing works. it this a bug? When I created the album several years ago, I was able to copy and paste photos into it, but now when I try to copy and paste nothing happens. Again I ask, is this a bug?
Try also posting here:
iPhoto for Mac -
Unable to print my past orders
It's very annoying: you quite often change your website interface and it never improves. Once again this month, I am unable to print my past orders:
I have this 500 Dispatching Error instead of my list of past bills.
Will you be able to get it right one day?Getting the same problem. Pretty shoddy for a company the size of Adobe.
-
Unable to adjust column mapping
Hi,
I have an LOV where I've 4 items from the same table DONOR_TAB
COLUMN NAMES RETURN ITEM
FIRST_NAME DONOR_TAB_BLK.FIRST_NAME
DONOR_CODE DONOR_TAB_BLK.DONOR_CODE
MIDDLE_NAME DONOR_TAB_BLK.MIDDLE_NAME
LAST_NAME DONOR_TAB_BLK.LAST_NAME
I need to add one more item to the LOV
CITY_NAME DONOR_TAB_BLK.CITY_NAME
All the above reside in the same block DONOR_TAB_BLK
CITY_NAME is in the block where all the previous 4 items reside i.e FIRST_NAME,DONOR_CODE,MIDDLE_NAME,LAST_NAME.
But CITY_NAME belongs to CITY_MASTER_TAB table whereas the previous 4 items belong to DONOR_TAB table.
When i add CITY_NAME to the record group for LOV and compile , i get the message "Unable to adjust column mapping for form ouptut"
Why is this? I know i've committed some error somewhere but i'm not sure where.
Can u help me?Are you using Designer to add LOV to a Module Diagram and then generate a Form?
Or are you using Forms Builder to create record group for LOV? -
With the mute switch OFF - I am unable to adjust the ringer volume by the side buttons.
When someone calls/texts there is no sound coming from the speaker.
The headphone jack works when I listen to the Ipod and the speaker works when I change the ringer volume through settings. So i know that the speaker does work
Headphone jack seems clean and dust free
I heard that there may be a Skype issue than can control the speaker volume - so i deleted it but i still cannot get any sound from regular functions.
When I play the Ipod through the speaker with no headphones there is no option to change the volume and no sound.
If it works when i go through settings to set my ring volume, my ringtone plays - then why does it not work otherwise?I have Iphone4s 16GB, IOS7.0.4 updates having a problem , that when i press + or - volume keys while my iphone is ringing my iphone 4s goes silent .
Whereas you know silent key is used to make the ringing phone silent. This button is working ok while only problem is my iphone goes silent while pressing + or - volume keys as these keys should increase / lower the ringing volume . These keys were ok working in IOS 6.
Where as these keys are also working ok in music player of iphone for IOS 7, the only problem is for ringing. -
Unable to adjust token privileges eventhough has all the priveleges granted
I've follow exactly the step listed in the documentation
on how to configure NTRealm
but then I will still get the same error message:
"Unable to adjust token privileges"
anyone who encounters such problem?
any help/hints from fellow weblogic user would be very appreciated
Honggohonggo, you can go to http://support.bea.com/welcome.jsp and use the AskBEA
feature and type in "Unable to adjust token privileges?" and you will get
some newsgroup posting form NTRealm problems under the newsgroup search
result.
Joseph Nguyen
BEA Support
"honggo" <[email protected]> wrote in message
news:3c9edada$[email protected]..
>
I've follow exactly the step listed in the documentation
on how to configure NTRealm
but then I will still get the same error message:
"Unable to adjust token privileges"
anyone who encounters such problem?
any help/hints from fellow weblogic user would be very appreciated
Honggo -
Unable to copy or paste in Dreamweaver CC
I am unable to copy or paste html or simple text in my DreamWeaver CC files.
I've tried starting from scratch, with a fresh page.
When I open a file or create a new file, I see this message:
I have worked with DreamWeaver for years and rely on it for my work everyday.
I have not seen this message before. I only recently started using Creative Cloud, so I'm assuming this is related.
I would appreciate any help. Is this the only support that Creative Cloud has?Try step #4 - Delete FileCache.dat files from the Dreamweaver user configuration folder.
http://helpx.adobe.com/dreamweaver/kb/troubleshoot-javascript-errors-dreamweaver-cs4.html# main_dat
Nancy O. -
:FRM-30085: Unable to adjust form for output.
I have built a form on my laptop running Oracle Developer Suite 10g (10.1.2.0.2) and runs fine. I started having the message below
:FRM-30085: Unable to adjust form for output.
when I tried to open this form on another version of Forms running Oracle Developer Suite10g (9.0.4.2.0) on another computer.
Could this be the reason - non-backward compatibility.
If this is the reason, Is there a way to around it.
Many thanks
cube60Yes, you are correct - you cannot create a form in 10.1.2 then try to run it in 9.0.x. There is no way to avoid this.
In order to go from an older version to a newer version, you must recompile the source code (FMB, MMB, PLL) in the version where you expect to run it. You cannot simply take an FMX file which was created in 9.0.4 and expect it to run in 10.1.2. This would fail. New executables would need to be created using the 10.1.2 compiler. -
Unable to Adjust the Auto Locking Facility in Noki...
Unable to Adjust the Auto Locking Facility in Nokia C2-03, If anyone knows means please post the solution currently i am using v 07.63 version of frimware
NothingNat wrote:
There is no options like phone in settings...
Did you check properly ..(Scroll down till the end) ???
Menu --> Settings --> PHONE ... and there on .. -
"Unable to adjust form for output" err msg
When attempting to compile a form, using either forms builder or
compiler, I get the following error message:
FRM-30085: Unable to adjust form for output.
When looking up the error code, I see:
Cause: The LOV name referenced does not exist.
Action: Specify another LOV name, or delete the reference.
FRM-30085: Unable to adjust form for output.
Any ideas out there?Check all LOVs. Some of LOVs return values in non-existing
fields. Open LOV properties and go to "Column mappings" and
check Return Items for all fields in every LOVs. -
Form: FACTORY_ADDRESS :FRM-30085: Unable to adjust form for output.
Hi there,
I have Oracle Enterprise 9i and Developer 10g with Forms on my laptop. I have created a form which runs quite alright from my laptop, but on transferring this form to another computer running Oracle Enterprise 10g and Developer 10g with Forms and with exactly the same backend database schema, it gave me the following error and would not load.
Form: FACTORY_ADDRESS
FRM-30085: Unable to adjust form for output.
What can be wrong?
Many thanks in advance
Cube60You need to recompile your fmb files to fmx when you redeploy your forms in a new major version. What exact version (all the 5 version digits you find when you show the About box in the builder) are running in the two installations?
Maybe you are looking for
-
ITunes is extremly slow on Windows 7 64 bit
Hi there I have major issues with iTunes 10 on my Windows 7 Ultimate 64 bit. All my music is on a Windows Home Server, worked perfectly with older versions of iTunes. When i start iTunes, it uses 1 core in the cpu for 100% for a long time, and is com
-
I'm trying to play Splinter Cell Mac Version on my G5 but my monitor keeps on coming up with the out of frequency message. What resolution do I need to set my monitor to so I can play. I'm running at 1280x960 on a 17" LCD.
-
I would like to upload music from CDs or downloads straight to my iPod, and not keep the files on my computer. I've uploaded 10-20 CDs and the loading time is already getting longer.
-
i have a form which contains trainee information, in one section having payment option 1 cheque(cheque no,issue date,amount,valid up to) 2.cash(Amounts) this field are display conditional means when i select cheque(cheque no,issue date,amount,valid u
-
I stop using my Ipod for a few months and then when i wanted to use it it didn't turn on. I try to charge it but after two hours of charging it says it still needs more charging time. It didn't get wet or anything like that but, i does make a funny n