Unable to block line item in a schedule agreemnet using ME32L

Hi Experts,
When I am trying to block/delete one of the line items in a schedule agreement I am not able to do so. I am getting the error message "Document lines of document item (16) are in different fiscal years".
Further the diagnosis message given is "If you are using Funds Management and want to set a carryforward level for the commitments documents, then all line items which belong to a document item (e.g. different schedule lines or account assignments of a purchase requisition belonging to the same purchase requistion item) must be created in the same fiscal year.
Otherwise the criteria for setting this carryforward level are not clear"
The procedure is given as "Check the respective date on which the different line items were updated and adjust it appropriately and instead generate a new document item (e.g. purchase item)"
Can any of you throw some light on this.
Regards
ACR.Ruben

Thanks for the input.
The validity of the Schedule agreement is till 31.03.2010.
Regards
ACR.Ruben

Similar Messages

  • Delivery block on the line item and on schedule line

    why are there two delivery block on the line item and on schedule line  respectively in the sales order? which one is exactly used for blocking delivery order from creating ? thank you very much!

    Hi
    The reason being, each line item can have more than one schedule line. If the line item has only one schedule line, the block at item level or SchLine level gives the same result. If the line item has two schedule lines, and if you want to block only specific delivery(one among the two schedule lines) the block at item level blocks both the deliveries and if you use delivery block at schedule line level, you can block only the required scheduled delivery.
    Thanks,
    Ravi

  • Block Line items in sales order with no confirmation and auth check

    Hi.
    We have a requirement to block some line items ( hold for review ) in a sales order while allowing other line items to be delivered.  In the standard SAP system, a schedule line block is possible, but it does not remove the confirmation for the line item. Also, we would like only some authorized people to be able to remove the block.
    Would appreciate suggestions from the forum
    Thanks and regards
    Rohit Zalani

    Hi,
    Thank you for your responses. We could do a reason for rejection, but would not like to go down that path since the item is not classically rejected and it may show up in the rejection reports or give wrong information. We wanted to use a delivery block and remove confirmations for the line item. Standard SAP does not operate this, but would appreciate inputs from the esteemed members if anyone has done this before.
    Thanks and regards
    Rohit Zalani

  • Reason for Rejection for blocking line item for delivery

    Hi All,
    I am working on this project where based on earlier configuration, by selection reason for rejection, delivery for line item is getting blocked.
    I want to change this settings because reason for rejection should not be controlling the blockage it should be merely be the reason. Delivery should be blocked if it is blocked by selecting delivery block field in schedule line for the line item.
    How can I change the settings for the reason for rejection?

    Dear ankit.k.agarwal      
    If you assign a reason for rejection system will block the particular sales order and that sales order shouldn't be used any longer.
    This is the standard SAP behavior and the program was written like that.
    Still if you want to do , you have to go for an enhancement to change the standard program(It is not suggestible)
    In stead you add a new field in sales order(field exit)  and convince your key/core users to maintain the reason for rejection in that field .
    Co ordinate with your technical team
    Thanks&Regards
    Raghu.k

  • Unable to see line items in segment clearing account

    Friends,
    Why we are unable to see the line items in intersegment clearing account/zero balance clearing account, eventhough the master is maintained as open item  and line item display.

    Hi,
    I have received the following error message.
    Account 1999990, company code xxxx is clearing account
    Message no. MSITEM111
    Diagnosis
    You have stored account 1999990 in company code xxxx as a clearing account. At the same time, you use line item management with this account.
    System Response
    Error message issued because line item display cannot read data for an account in a ledger if line items exist partially in the entry view together with clearing items for which there are no line items. In such cases, only the data with line items would be selected.
    Procedure
    Check the Customizing settings or account control. Change the settings so that only automatic postings without line items can be made to the account, or select a different account as the clearing account.

  • Unable to delete line item with 0 quantity in Invoice.

    Hi Experts,
    I came across a Invoice which reflects in VF04 as pending Billing due list. When i checked at the inter company Invoice i came across a line item with "0" quantity and price as zero, interestingly the replinishment cross company delivery document  for the same line item for "0" quantity had a Batch assigned to it.
    Now the issue is cusotmer has selected the line item with XX quantity and have selected the accounting document to be generated but the line item with "0 was left over and now still reflects in VF04.
    Customer does not want to reverse the full cycle to resolve the issue since the document was created a year back.My Question  is can we get the line item with "0" quantity to clear accounting so that it will not reflect in VF04.If so what will be process to do that.
    Thanks in Advance to advice.
    Regards,
    Sridhar.R

    Hi,
    It is  not possible to delete this line item, you can discuss with your client and delete it from the table.
    And now coming to the reasons why it has come into the invoice & Delivery
    1. The Batch Item category must have been configured as relevant for billing...check this and make it irrelevant if the client does not do batch specific billing. --- This will stop the batches from coming into the invoice.
    2.  Check for the batch item category in delivery if Zero quanity is allowed...if it is allowed make it not allowed and make it an Error message, whenever there is a zero quantity system will give a message.

  • Blocking line items while open item selection for clearing

    We would like to block open items with one particular special GL indicator during open item selection for clearing.  The SAP transaction code is F-32
    Regards
    Ramesh Nalamada

    Hi Ramesh,
    Basically, what Meenakshi is saying is that you would have to build a Validation for this using transction code <b>GGB0</b> and stipulate in your condition that whenever any of your intended special G/L indicator is chosen during processing, the system should return an error message saying, for instance "<b>You cannot carry out Manual Clearing for this type of account</b>".
    I hope the above helps.
    Do not forget to award the points please.
    Regards,
    Jacob

  • Unable to print line item 1 and line item 2 into one box iin SMARTFORMS

    helo,
    i have printed in the folowing  way.
    but i want these two things to come ion one box....like page protection..
    <b>Item Details
    Item   material     term     qty    uom    unit price    total</b>
    1        ..................................................................
    2        ..................................................................
    <b>Item Quality Specifications
    characteristic    basis    limit    oper    value    base unit    per </b>
    a                        ..............................................................
    b                        ............................................................
    Till the above part i have printed.
    now i want to make those two items together in a group.
    i have tried page protection but i dint get .
    those two should together with a rectangular box around it.
    if the those two will not fit in the box then it should go to second page.
    kindly help me .
    Regards,
    deepthi.

    Hi
    Which SRM version are you using ?
    Please go through this ->
    If you are using extended classic scenario you can simply delete the line items in the PO within SRM. This will replicate the appropriate changes in the backend.
    You won't be able to change the PO in the backend as this is standard functionality.
    You can also archive SRM PO incase you don't want to delete the same
    PO Archiving
    Once the purchase order is ordered and issued, it is a legal document between your company and the vendor. Only PO line items can be deleted and you can not delete PO header.
    Deleting line item of PO is not enough. Make sure that PR or SC history does not contain any follow on document else system will interpret this a close PR or SC.
    Because the PO was already printed or output exist... You cannot delete PO header.
    Once the PO has been issued to vendor in any form, deletion is not possible at the header level, only possibility is deleting line items of the PO (deletion indicator marked for all the line items of PO). Only when the PO is rejected by the approver (in case any, which will be in the 'release rejected' status) or in held state (before issued to vendor), PO can be deleted at the header level, as the data still exists in SRM and not get transferred to R3 backend. If you want to forcibly delete the PO at the header level, flag DOC_CLOSED field in the table BBP_PDHGP (header tabe) through BBP_PD for the respective PO.
    Try using the Function Modules "BBP_PD_PO_DB_DELETE".
    BP_PD_PO_ITEM_DELETE_LOCAL
    Some other relevant Function modules ->
    BP_PD_PO_DB_DELETE_MULTI
    BP_PD_PO_ITEM_DELETE_LOCAL
    BBP_BS_POD : Spooler, delete PO
    SPOOL_PO_DELETE :Spooler function to delete a po in core
    SPOOL_PO_DELETE_DO :Spooler function to delete a po in core
    Related links ->
    Re: Cannot delete Limit Shopping Cart line item
    Re: How to delete a PO in SRM
    Re: SRM PO Deletion
    Re: Delete item in the PO
    Do let me know. Hope this will help.
    Regards
    - Atul

  • Unable to add line item to a Service Ticket!

    Hi Expets,
    I am facing some difficulty in adding a line item to a service ticket. The service ticket is not getting saved.I think I am missing some parameter to be passed to CRM_ORDER_MAINTIAN.Please find below my coding:
      lv_product_i-ref_handle = '0000000002'.
      lv_product_i-process_qty_unit = 'EA'.
      INSERT lv_product_i INTO TABLE lt_product_i.
      ls_orderadm_i-header = lv_header_guid.
      ls_orderadm_i-ordered_prod = 'SERVICEITEM_SG5'.
      ls_orderadm_i-handle = '0000000002'.
      ls_orderadm_i-mode = 'A'.
      INSERT ls_orderadm_i INTO TABLE lt_orderadm_i.
      ls_input_fields-ref_handle = '0000000001'.
      ls_input_fields-objectname = 'ORDERADM_I'.
      CLEAR ls_field_names.
      ls_field_names-fieldname = 'MODE'.
      APPEND ls_field_names TO ls_input_fields-field_names.
      ls_field_names-fieldname = 'ORDERED_PROD'.
      APPEND ls_field_names TO ls_input_fields-field_names.
      INSERT ls_input_fields INTO TABLE lt_input_fields.
      CALL FUNCTION 'CRM_ORDER_MAINTAIN'
        EXPORTING
          it_product_i      = lt_product_i
        CHANGING
          ct_orderadm_i     = lt_orderadm_i
          ct_input_fields   = lt_input_fields
        EXCEPTIONS
          error_occurred    = 1
          document_locked   = 2
          no_change_allowed = 3
          no_authority      = 4
          OTHERS            = 5.
    I am also calling the save and commit BADI's after this, but somehow its not working for me.
    Can anyone please help me out on this or provide some pointers?
    Thanks and Regards,
    Rohit

    Hi,
    I have tried everything, still its not working.
    First I tried creating a Service Ticket and adding the line item at one go.Then I was getting status error:
    System error: An attempt has been made to create a status object
    with the object number DE20131333937DF180C5001372F65D25.  However,
    a status object with this number exists already.
    Code sample given below:
      CALL FUNCTION 'BAPI_BUSPROCESSND_CREATEMULTI'
        TABLES
          header          = itab_header
          item            = itab_item
          partner         = itab_partner
          status          = itab_status
          text            = itab_text
          return          = itab_return
          service_os      = itab_service
          input_fields    = itab_input_fields
          created_process = itab_created_process.
    Then I tried creating a service ticket first and adding item later.Then there was no dump, but item details are not getting saved. Code sample given below:
      CALL FUNCTION 'CRM_ORDER_MAINTAIN'
        EXPORTING
          it_product_i      = lt_product_i
        CHANGING
          ct_orderadm_i     = lt_orderadm_i
          ct_input_fields   = lt_input_fields
        EXCEPTIONS
          error_occurred    = 1
          document_locked   = 2
          no_change_allowed = 3
          no_authority      = 4
          OTHERS            = 5.
    Can anybody please help me out on this? What is the correct approach?
    Thanks and Regards,
    Rohit

  • Unable to copy line item from Sales Order [ZPLV] to new Sales Order [ZPCV]

    I have here a requirement to create a new Sales Order[ZPCV] with reference to the previously created SO[ZPLV].
    I looked in transaction code VTAA, and the configuration for the aboves condition is:
    target sales doc type - ZCPV   from sales doc type - ZPLV
    dataT: 302, 907 and 001 respectively
    copying requirement: 001
    copy item number is checked
    complete reference is checked
    is there something wrong with the configuration?
    please advice!
    thanks,

    Hi
    For those line items you can assign a REASON FOR REJECTION. Automatically the status of those line items will be closed.
    Thanks,
    Ravi
    PS : sorry....please ignore my post.
    Edited by: sankar ravi on May 20, 2008 3:45 PM

  • Unable to delete line item in Sales Quotation

    Dear Experts,
    We have a scenario, where in on creation of Sales Quote, system triggers Production Order. We process the order further, perform GI against Order for components and perform GR against the Prod Order.
    Now if business decides to drop this further, we need to reverse the GR made against the prod order and then perform the reversal of Goods Issue made against the Production Order.
    Finally, change the quantity in the quotation to either zero or delete the quotation line item. Now on doing this system throwing the error as "Prod Order xxx cannot be deleted"
    Message no V1342 & V1798 are triggering.
    Any inputs please
    Thank you,
    Regards,
    Ramakrishna Mangena

    Hi
    Guess, you couldn't delete the line item because of the existence of subsequent documents referring that line item. You cannot assign a reason for rejection also.
    Thanks,
    Ravi

  • Addition of line item details in offfline mail using BBP_OFFLINE_APP_BADI

    Hi,
    I am using the BADI BBP_OFFLINE_APP_BADI ,METHOD MAIL_DATA_GET to add the SC line item details in the offlne approval mail which is sent out from SRM system to approvers external  mail id.
    However when i try to insert the line item details in the table  CT_MAIL_TEXT,the data gets truncated.i.e. All the fields im inserting are not displayed in the mail.The data type of the table CT_MAIL_TEXT is SOLI_TAB,so the text field length is 255 char.Then why is it not displaying all the fields which I am inserting?ANy clues...

    Hi,
    I could partly answer my question , when i am trying to debug the report foreground i had to put values in the
    Work Item Creation Date From field and only then the debugger stops at the implementation otherwise not , but when we schedule the job in the background we would not be giving the from date there so I am a little skeptical about that , please can someone throw some light on it.
    Also I am awaiting response on the second question.
    thanks

  • How to insert a new line item in VA01/VA02 by using ABAP code?

    Hi Gurus
    i have a very tough requirement. the customer wants to insert a free goods after an item has been populated in VA01/VA02 automatically according to some certain rules. the input material may be a main material of a sales BOM.
    for example. let's suppose there is a material A who has two sub-material B and C which is maintained in a sales BOM via CS01/CS02. when the material A has been input in the line item in VA01/VA02, its quantity input and after the ENTER key has been clicked, another material D may be displayed in a new line as a gift if the condition met.  the condition relates to customer/material/quanity and these information are stored in a Z-table.
    on the other hand, if the material A is only a single material(not a BOM), the gift(material D) will also be filled automatically if the condition met.
    i have already enhance the FM cs_bom_explosion to filfill the requirment for BOM materials. whereas it is very hard to find the enhanment point for the single material.
    so my question is where is the correct place for me to insert the ABAP code, which decides whether the gift should be given or not and furthermore inserts the new line item into XVBAP. i tried to use MV45AFZZ, whereas the data is always inconsistant if a new line has been inserted. it is very strange that there is no temperary internal table storing line item data input in the table controal of VA01/VA02. system reads the line item data , line by line, via a system kernal function call.
    any hints are welcome. thanks

    HI Stephen,
    I have the same prolem. I modified the 5 global tables, but I don't see the new line in the screen.
    Can you help me with some details?
    Thx!
    Mihaela

  • Add New line item from Quote to Contract using CRM_ORDER_MAINTAIN

    HI Gurus,
    I need to add a new line item with entire item details such as SALES PRICING etc in contract,
    i am confused like what are the parameters i need to pass to FM CRM ORDER MAINTAIN,
    Please help me on this regard.
    Thanks & regards.

    Experts,
    any luck i have please help me on the same.
    Thanks.

  • One line item missing from PO created using Shopping cart

    Hello Team, we have raised a shopping cart with 6 line items, having the same vendor and account assignment details. Once the shopping cart was approved the PO was created but the 3rd line item was missing in the PO. When we checked in BBP_PD, the 3rd line item is still showing as item in transfer process. Can anyone please throw some light to this issue. All the line items were approved.
    Thanks.
    Richa

    Hi Richa,
    Is there any error in RZ20 for that shopping cart?
    Best Regards,
    Bharathi

Maybe you are looking for