Unable to choose a file in a package

Hello everyone
I'm developpeing an input interface were the user have to choose a file to import. I can't use the standard package becase i need to make some checks before importation in SSIS. I can't success to send varaible from the modifyPackage into the SSIS
I tried the INFILE(%FILE%,,blabla)
But i can't succed to send the varaible inside a GLOBAL variable or by modifying a SQL script or a connection manager
By looking at the logs i can see that the path is is correctly assigned to variable %FILE% . By in the TASK the %FILE% varaible isn't replaced by it's value.
I'm on BPC 7.5 SP3 patch 3 and i never had this issue before. Is it related to this version ?
Best regards,
Paul

Thank you Sorin for your quick answer
Here is what i tried first :
PROMPT(INFILES,%TITI%,"saisie",)
CONNECTION(FichierInitial,ConnectionString,%TITI%)
But i got the error saying the %TITI% isn't a proper file name.
At the same time in the log i got a line saying : INFO(%TITI%,C:\.....)
Actually it seems that the variable %TITI% isn't replace by it's value.
Then tried to send it to an SQL script task
PROMPT(INFILES,%TITI%,"saisie",)
TASK(PathTask,SqlStatementSource,"insert into Z_TEMP values ('%TITI%') ")
After looking in the table i got the value %TITI%.
I also tried differents combinations of the following character : ' " '' without any success.
It's far from being my first interface and i have always managed to send thoses values into SISS.
What's event more strange is that other values like %USER%, %APP% or %CLEARDATA% are send without any issue ! (i also tried to rename the variable)
Any test i could perform ?
Edited by: Paulnovak on Dec 15, 2010 4:44 PM

Similar Messages

Unable To Include Files In iOS Package

Hi,
I an using the latest release version of Flash Builder, trying to package an app for the iPad. I have an AIR application that I created to run on a desktop, and have modified it to run on the iPad. It works fine, however I cannot package the need resource files it uses, such as jpg, xml, swf, and flv files within the ipa file using Flash Builder. It seems that if I select more than 30-40 of these types of files to include, Flash Builder will not compile the ipa file without some sort of error, the most common one talks about:
"Cannot run program "java.exe" (in directory "C\Users\lee\AppData\Local\Temp\AOT1308010984915"): CreateProcess error=206, The filename or extension is too long"
Now I am guessing that Flash Builder is appending all of my selected files to a command line string or something somewhere, and so it can't handle that long of string on the command line. If I stick to less than 30 files, it works fine, but if I try and the 1000 or so files that I need to, it will not work.
This app would never be in the app store, but rather on internal company iPads. The reason for so many files is the number of products the app covers, and the number of languages it supports. So yes the ipa file would be about 500Mb, but that should not be an issue, since an ipa file is basically a zipped archive. I think this is a bug though in Flash Builder; the program also becomes unresponsive when trying to access the include file list located in Project Properties -> ActionScript Build Packaging -> Apple iOS settings dialog. It make take several minutes before FB becomes responsive again when working with this number of files.
Does anyone have any suggestions?
thanks

Hello,
Since I first encountered this bug, I have always had my asset files in
subfolders. See the attached screen shot. This is my project folder, and
every subfolder is included except for the com folder, which for some
reason FB copied into the bin directory on it's own.
So I do not think this fixed. In this report, they are not using the same
number of files as I am, so it is possible that this only works with a low
number of files.
thx
Anirudh Sasikumar <[email protected]>
06/23/2011 01:26 AM
Please respond to
[email protected]
To
Keith Lee <[email protected]>
cc
Subject
Unable To Include Files In iOS Package
Caterpillar: Confidential Green Retain Until: 07/23/2011
Here is the bug: https://bugs.adobe.com/jira/browse/FB-31616
The comments seem to indicate that if you put your files in a subfolder
rather than directly in src, it should work.
Let us know how it goes.
-Anirudh

ERROR ITMS-9000: "Unable to parse opf file: package.opf" at Book

ERROR ITMS-9000: "Unable to parse opf file: package.opf" at Book
No problem checking repeatedly check the opf file could not be found.
Please help me.

ERROR ITMS-9000: "Unable to parse opf file: package.opf" at Book
No problem checking repeatedly check the opf file could not be found.
Please help me!!!!
Please help me!!!!
Please help me!!!!
Please help me!!!!
Please help me!!!!

Indesign CC packaging process fails with the error message "Unable to copy necessary file(s)"

When I try to package a file with a lot of links, the Indesign CC packaging process fails with the error message "Unable to copy necessary file(s)". I am able to make a PDF of the same file, but when packaking the process fails every time. The app does not crash, just gives an error message. What gives?
(I'm using a MacBook Pro Retina Display with 16 GB RAM, running OS 10.9 and all CC 9.1 updated with the latest patches).

@John – that's really strange… the thing with the file names depending on the file type. That could eleminate Mavericks a bit from the equation and put the weight more on InDesign CC.
Provided:
1. You give it a go with InDesign CS6 v8.0.2 and tests are showing it will work fine in this regard.
2. The same composite characters are present in both file types, the ai files and the PhotoShop ones. On a Mac OSX characters for files and folders can consist of "composite" components:
ü for example is a two component one: the u and the two dots above the u. On a machine with MS Windows, this is not the case…
InDesign CC was programmed from scratch for a 64 bit architecture. So it could be a severe bug in InDesign CC.
Maybe other readers in this forum could test for these cases…
Uwe

Unable to choose "Selected albums, events and faces..." when Syncing photo

I am unable to choose "Selected albums, events and faces ..." from the Photos tab when syncing my iPhone. There are several albums set up in my iPhoto but the only choice I am allowed to make is "All photos, albums and faces". The other choice is grayed out.
My iPhoto version is 8.1.1 and my iTunes version is 9.0.2 and OSX is 10.6.2.
Does anyone have any ideas why this would be happening?
Thanks

Hello - I had the exact same problem that you had. Looking through various discussion sites, the problem seems to be in the Albumdata.xml file in my iPhoto Library. (Visible through Pictures/iPhoto_LIbrary then by selecting "show package contents" through the right click.) When that file is corrupted, iTunes is unable to see albums, events, etc.
I'm guessing that the song for one of my slideshows in iPhoto had a song that had an "&" in it, because when I deleted the slideshow, the problem was solved. This also happened with another user in another discussion forum that I looked through - in his case, he just changed the song. (http://forums.macrumors.com/showthread.php?t=355813) Hope this helps.

Unable to install Adobe CS5 64 bit package created using Adobe Application Manager on Windows 7 64

I am unable to install Adobe CS5 64 bit package created using Adobe Application Manager on Windows 7 64 bit.Basically installation rollback on Win 7 64 bit image.
MSI Log File :-
Property(S): ProductToBeRegistered = 1
MSI (s) (5C:D4) [17:59:21:784]: Note: 1: 1708
MSI (s) (5C:D4) [17:59:21:784]: Product: Adobe_CreativieSuite_5_MNT -- Installation operation failed.
MSI (s) (5C:D4) [17:59:21:784]: Windows Installer installed the product. Product Name: Adobe_CreativieSuite_5_MNT. Product Version: 1.2.0000. Product Language: 1033. Manufacturer: Adobe Systems Incorporated. Installation success or error status: 1603.
Please let me how to install 64 bit package on Win7 64 bit.
Thanks in Advance.

Ok so I downloaded the most current installer CS5.1, My previous installer was version 5.0. It did install fine fully updated to my license version. I just wanted to update in case anyone in the future has a similiar experience. Too bad this advice was not offered by the "experts" here.

Unable to open .chm file from a link in Weblogic 7.0

Unable to open .chm file from a link in weblogic server. But the same
jsp code works in Websphere
Sample Code :

The above link, works well in websphere. help is a folder that
resides in the server. But when i tried to execute the same in
Weblogic, some junk characters appeared . so i tried to direct the
link to Display.jsp and passed the path of the chm file as the
parameter. I cleared teh out buffer using out.clearBuffer() . i set
the content type to application/x-msdownload and also set the header
to content disposition.
Nothing worked .
I also tried another way.. That is the following
I even tried including the mime type
<mime-mapping>
<extension>chm</extension>
<mime-type>application/x-msdownload</mime-type>
</mime-mapping>
in the web.xml file. and still it doesnt work
Nothing Worked . What should i do ? I need immediate help to sort out
this issue. Can anybody help me
- Angel

This could be a Launch Services issue. The following article describes how to manually reset Launch Services — the notes at the bottom of the article also provide information about the side effects of deleting each of the files involved:
Resetting Launch Services
If you prefer using a cache cleaning utility instead of following the manual procedure described in the previous article, take a look at this other article for general troubleshooting and cache-cleaning procedures. Actually, you should also verify/repair the startup disk (not just permissions), as described there:
Resolving Disk, Permission, and Cache Corruption
The most appropriate utility for this particular problem probably is Tiger Cache Cleaner, but you may also want to consider other utilities, such as OnyX, or Cache Out X, which are free. Whatever utility you choose, be sure to read this first:
Side effects of System cache cleaning
As an example, this is how you should proceed with OnyX:
1. Quit all applications.
2. Launch OnyX and enter your administrator password.
3. Go to Maintenance > Reset and check LaunchServices database.
4. Un-check any other pre-checked options.
5. Click the Execute button.
6. Restart the computer.
BTW, if you’re running Mac OS X 10.4 (Tiger), as your profile indicates, it would have been more appropriate to discuss this in the Mail & Address Book - Tiger forum. If the discussion applies to both Mail 1.x and Mail 2.x, it doesn’t really matter, but it’s difficult to know that in advance.

I am unable to open video files on this website.

When I click on video links of the following website--http://tubtub.com/--I receive an error message that reads as follows:
"File not found
Firefox can't find the file at mms://TITLE.tubtub.com/.
Check the file name for capitalization or other typing errors.
Check to see if the file was moved, renamed or deleted.
Try Again"
I had initially seen a window that was named "Launch Application," which, seemingly, allowed one to choose an application by which to open the video links. I chose my VLC player to do this and checked a box to associate this "Launch application" window with the VLC player, but received an error message that VLC was unable to open the file that began with an "mms" URL. Then I was never able to get back to that "Launch application" window to select another application, such as Windows Media Player, Real Player, etc. I even tried uninstalling my Firefox browser and the VLC player and reinstalling them both, all to no avail.
Please explain how I may get these video links to play and the "Launch Application" window to open again. I recall having used TubTub.com successfully before.
Thank you.

Hi mendcocr,
Please see this document about configuring web browsers to display PDF files: http://helpx.adobe.com/acrobat/using/display-pdf-browser-acrobat-xi.html.
Please let us know if you need additional help.
Best,
Sara

'Unable to open project File' Please help....

Help. Since yesterday, Final Cut Pro has been crashing every time I have tried to render something. I have used the FSC Maintenance Pack that has been recommended and ran Crash Analyser and Corrupt Clip Finder. No corrupt clips were found and the Crash Analyser fixed the problem for a while and I was able to work for a couple of hours. (prior to this I also removed some Motion files and that also temporarily stopped the crashing). I began working on my project again today, and the same thing started to happen. I kept having to turn everything off at the source until finally I gave up! Just before I turned it off I started running Autosave Cleaner but it seemed to freeze too so I Force Quit it. I have just turned it all back on again and to my horror, my project is not even opening. My other FCP projects are opening but not the one I am working on. I have no idea what to do. Final Cut opens and the message is 'Unable to open Project File'. I am so upset and really hope that someone out there can help.
I run 10.5.8, I have 10 GB memory. All my clips are imported as XDCAM EX 720p25 (original format MPEG HD) but I have been working in this project for weeks without a problem.
Thanks in advance
Gill

I don't know why it is set to the internal disk, but that is the default. That is not project related. It is system related (hence System Settings). So probably you started fcp one without the external disk attached. FCP forces you then to choose another scratch-, waveform-, thumbnail-, autosave location.
Probably you've set it all to the internal disk then.
Next time when the external disk was there again you might have only reset the scratch disk, but not your Autosave location... Just a thought.
That is, IMHO, the disadvantage of system orientated scratch disk settings...
Rienk

"Unable to open project file" message in final cut express 3.5.1

I have (well had now) a project with 3 video clips and multiple .psd files as stills. When the project contains just the 3 video clips and a couple of transitions I can save the project and quit Final Cut Express and relaunch FCE and when I try to re-open the same project, it opens just fine, without any problems and just the way I expected it to be. After editing the same project for a couple of hours and saving along the way (this has happened twice now and I don't think the length of time of editing matters) and adding multiple still images to the 3 video clips (this part is new in my working with FCE); I save and quit. When I return to open the same project I get the message "Unable to open project file" and click the OK button, which is my only option and I am given a new blank project. So where did my work go???

Thank you for the response, but it hasn't worked yet...
I read the link. I am working off my internal drive.
I re-named the Capture Scratch folder, and any Render folders and then launched FCE. I was presented with a window that reads "To preserve the integrity of the data used by Final Cut Express HD, it is necessary to ensure the existance of the following path(s)" The path in the box below is where my project file and support files are. My 3 options are Quit, Check again and Reset Scratch disk. I choose the Reset Scratch Disk button and it took me to the Scratch Disk window and I Set/Created a new folder and clicked Choose and then OK back at the Scratch Disk window and Continue at the initial window... the Reset Scratch disk button is now labeled Continue. I am given a new Untitled Project work space. I tried to open my project file and once again with the message "Unable to open project file".
Where did I go wrong???

Flash CS5 unable to play .FLV files on Macbook Pro

I have a colleague who is trying to put together a Flash package for me on her macbook pro. It needs to play an flv file. She is unable to play flv files on her computer either in Flash or using the Adobe Media Player. I have no problem playing the same files on my macbook pro, we're both running the latest OS and have version 1.8 of Adobe Media Player.
She went to the Adobe site to download the latest version of Adobe Media Player, hoping that might include whatever component is missing on her system. Because of Adobe's decision not to distribute AMP that didn't help. She has Flash Professional CS5 11.0.2 on her system. When she imports an flv video into a Flash project and tries to play it she gets an error message saying it can't stream the video. Note that the video is on her hard drive, it is NOT on the internet so no streaming should be required.
The actual error message is: "the video player is in the connection error state. It enters this state when a video stream attempted to load but was unsuccessful. There are two possible reasons for the error: no connection to the server or the stream was not found."
Since it's a file on her hard drive, and she has loaded the file into the Adobe development environment successfully, the one thing we know for certain is that neither of these reasons is correct. Something is obviously missing on her system, what is it and what can we do to fix it?

I'm getting error too (Error #2044: Unhandled NetStatusEvent:. level=error, code=NetStream.Play.StreamNotFound). I'm getting this with CS5. This file was previously made in CS4 and never got this error.
Everything (fla and flv too) is on external hard disk.
As this work requires to be exported to mov, I've found out that everything needs to be on the mac (don't know for pc), like on desktop.
So, let me wrap up disadvantages I got with Flash CS5:
- TextField.embedFont makes the font disappear in CS5, so I can't use it, so I can't "play" with text in a comfortable way (in CS4, with embedFont = true, I was able to rotate and stuff). Now I have to make a bitmap out of it. It means 3 lines of code and a new variable, instead of just an easy one.
- I have to rebuild my entire source path structure for AS classes, as my old one (that took me years of effort to be reasonable and used to work just fine in CS4).
- I have to move stuff from my hard drive to the desktop, to make flv be played and to make a mov out of my animation.
CS5 is making my job harder and making me lose a lot of time to find out errors that have no good reason to exist (it was not error. just "place CS5 doesn't like").

While using a drop-down menu i.e. File, edit, image, or even when saving as and choosing the file type; the list appears and I am able to highlight what i want but cannot click on anything.

While using a drop-down menu i.e. File, edit, image, or even when saving as and choosing the file type; the list appears and I am able to highlight what i want but cannot click on anything. This is becoming incredibly frustrating. It happens at random time and a restart of the computer is all that helps, then with out any notice it starts to do this again. Mac Book Pro i7 2.2 16 GB 1333 Ram, (2) 450GB SSD both internal to machine. At this point I am losing file because I am unable to save in the file type I need. Does anyone out there know how to solve this issue?
Thanks
phil

I haven't been unify photoshop much in the past month, but I did try your suggestion and it seemed to work for a while. Today when i went to save a document the same thing happened: click on file>save at this point I can not click on save even though it is highlighted. Tryed to use command s that brings up the save dialogue box, but when I try to change file type I again cannot select it from the drop down menu.

EhP1 - Unable to create XML file in Solman

Hi all,
I need some assistance
I am trying to upgrade our XI system to EhP1 - SP04. I use Maintenance Optimizer in our Solution Manager (SAP EHP 1 for SAP Solution Manager 7.0) to select the necessary files for my upgrade. The XI system has been set up in SMSY an given a Logical Component. Also, added to the Solution Landscape. I use the SAPehpi-installer to upgrade XI.
However, when I get to section three, I am supposed to provide the SMSDXML.xml file. This file is not created by our Solution Manager for some reason. The file, as I understand it, is supposed to be generated automatically during Maintenance Optimizer. But when I check the EPS and EPS/in folder of our solman, the file is not to be found. I have also checked the parameter DIR_EPS_ROOT in RZ11. It is correct. The authorization has been set to full on group Everyone, just to check if that could be the problem, but with no luck.
When I use transaction /n/tmwflow/mopz_stack i am able to view the XML file (I assume that it is the correct file), but any attempt to copy the text displayed, and to save it as an XML-file has not resulted in any success.
The only thing I have to go on, is a warning displayed in Maintenance Optimizer, stating: "Warning - No SLM configured in system - <SID>. Every document etc, Iu2019ve read sais that one can use Software Lifecycle Manager as an alternative to Download Basket. I havenu2019t seen SLM listed as a prereq, so I donu2019t believe that this could be the reason why the XML-file is not generated.
Is there some setup/configuration Iu2019ve missed?
Any help will be much appreciated!
Best Regards,
Stian
Notes checked:
1134872 FAQ for stack Delta Files
1022704 Upgrade phase EHP_INCLUSION and SPSTACK_REQUEST
1277035 Solution Manager: EHP4 product data missing

I downloaded the SPSTab.xml from SMP, but it didnt work. It gave an error: "The selected configuration file ("C:EHP1SPSTab.xml") is not usable. Reason: "Stackfile not found""
I have used the dockument in the link you provided as a basis for my upgrade. So I still need this to work in order to upgrade my XI Netweaver 7.0 to Enhancement Package 1...
In the document you provided:
Section 3 SAP Solution Manager
3.1 Support Package Level of SAP Solution Manager (Check - Mine is EHP1)
3.2 System Landscape (SMSY) of SAP Solution Manager (Check - as stated above in opening post)
3.3 SAP Solution Manager Maintenance Optimizer (Check)
3.4 SAP Solution Manager Troubleshooting: (Check)
3.4.4 No Stack Configuration File is generated: This is the core of my problem... I have read the notes listed, and run the IMG activity under Maintenance Optimizer, as per note 1134872. I get an warning stating "SAP ChaRM auto-configuration warnings" This could be the source of the problem, but in the thread Re: Message no. IMG_FASTCONF028 in Charm SolManiac says that it is nothing to worry about.
So to summarise:
I an still unable to generate XML file in Solman, and I am uable to get the XML downloaded from SMP to work with SAPehpi.
BR
Stian
(EDIT: I am however not shure if the settings under SMSY etc are 100% correct, but in my mind, that should prevent Maintenance Optimizer from generating the XML file)
Edited by: Stian Eiken on Jul 13, 2009 1:18 PM

Unable to get the file system information for: \\****servername\E$\; error = 64 Unable to distribute content to DP

One of our DPs has stopped loading content.
I've research for quite a bit and cannot find a clear cut reason to this. This server only has a DP role, I verified sharing permissions, all looked good. This DP has been running just fine for the last year or so and all sudden it will no longer load
packages. The disk drive is still present I can still reach the hidden share \\servername.com\E$
Verified that the SMSSIG$ folder is there and the last entry is from 4/23/2015
SCCM 2012 R2
OS 2008 R2 Standard
Any help is greatly appreciated!
Here's a snipit from the distmgr.log
Start updating the package on server ["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\...
Attempting to add or update a package on a distribution point.
Will wait for 1 threads to end.
Thread Handle = 0000000000001E48
STATMSG: ID=2342 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=***.com SITE=1AB PID=2472 TID=8252 GMTDATE=Thu Apr 30 19:12:01.972 2015 ISTR0="SYSMGMT Source" ISTR1="["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\"
ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=2 AID0=400 AVAL0="CAS00087" AID1=404 AVAL1="["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\"
SMS_DISTRIBUTION_MANAGER 4/30/2015 2:12:01 PM
8252 (0x203C)
The current user context will be used for connecting to ["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\.
Successfully made a network connection to \\*****.com\ADMIN$.
Ignoring drive \\*****.com\C$\. File \\*****.com\C$\NO_SMS_ON_DRIVE.SMS exists.
Unable to get the file system information for: \\*****.com\E$\; error = 64.
Failed to find a valid drive on the distribution point ["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\
Cannot find or create the signature share.
STATMSG: ID=2324 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=sccmprdpr1sec2.mmm.com SITE=1AB PID=2472 TID=8252 GMTDATE=Thu Apr 30 19:12:55.206 2015 ISTR0="["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\"
ISTR1="CAS00087" ISTR2="" ISTR3="30" ISTR4="94" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=2 AID0=400 AVAL0="CAS00087" AID1=404 AVAL1="["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\"
Error occurred. Performing error cleanup prior to returning.
Cancelling network connection to \\*****.com\ADMIN$.

Error 64 is being returned which is simply "the network name is no longer available".
There can be a number of reasons for this from SMB compatibility issues (2003 servers wont support SMB2), to the expected and actual computer name of the boxes don't match (tries to authenticate with server.tld.com when the actual name is srv-01.tld.com and
you just put a C-name in). I'd start from the top: Try opening said share from the Primary Site server as that's the box doing the work. Verify the IP and computer name is legit and that no one has played ACL games between the two systems (remember
RPC only initiates/listens on port 135 but established connections are up in the dynamic port range).
At the end of the day it's an issues "underneath" SCCM, and not an SCCM problem specifically.

Is there a way to add files to a package without repackaging in a new folder?

So I'm working on this promotional binder for a company. I'm working section by section including photos and whatnot. Anyways, I got to a certain point with one section and packaged everything so I could start anew the following day.
My question is this: is there a way for me to add files to the InDesign file I already packaged WITHOUT having to repackage in a new folder and archive the old one?
I mean it just seems to me that I SHOULD be able to select the package option and the work would repackage/update the package, much like a Word file would when you select the save button.
(And if there isn't, is someone at Adobe paying attention that could make this a possibility? That would be fantastic.)

You can Add images to your package by using the Links Panel submenu (top right) and choose Utilities> copy links to...
And you can select the images you want first - or don't select any to copy them all.
Fonts - not so much.
But that's one easy way to get new images into your packaged folder.
But I don't like this to be honest. I much prefer creating a new Package and calling it "Version 2" or "Final Artwork" or something that is right by your file naming convention.

Unable to choose a file in a package

Similar Messages

Maybe you are looking for