Unable to communicate from adapter engine to Integration engine

Hi,
I have a scenario as shown below.
Target PI->File sender CC->Soap Receiver CC->SOAP Sender CC->Source PI
The file is getting picked up using file sender CC but probably due to communication failure between file adapter and IE, the message is not showing up in SXMB_MONI.
What could be wrong here.

Hi
-->In ID from MENU->TOOLS->use Test Configuration to test your scenario.
-->You can understand where you get struck depend on that you can troubleshoot.
Thanks

Similar Messages

Unable to Find out Adapter Engine in the Communication Channel

Hi Experts,
I am Unable to select the Adapter Engine As Integration Server in the File Sender Communication Channel.
Please Let Me Know
Regards
Khanna

HI Khanna
Check the SLD that Adapter Engine is insatlled and all the adapter has the metadata there.
Go to Transaction Code SXI_CACHE in the Inetgration Server(XI- ABAP stack) Then you can see the list of components.
Just have a look into Menu Bar - in there goto : GoTo->Adapter Engine Cache ( if the status is green - then it is correct-otherwise you need to refreshit.)
You just go thru mentioned document from service.sap.com/nw04
You will get the full info about that.
/people/michal.krawczyk2/blog/2005/09/07/xi-why-dont-start-searching-for-all-errors-from-one-place
/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions
http://help.sap.com/saphelp_nw2004s/helpdata/en/0d/28e1c20a9d374cbb71875c5f89093b/frameset.htm
Just try with Visual Administrator to check the services for the adapter engine are running or not
All services starts with SAP XI..
SAP XI AF Core
SAP XI AF CPA Cache
SAP XI AF Messaging
SAP XI Adapter XI
SAP XI AF Security
Check SAP note on CPACache- 741214 and also 824236.
Let me know if any errors..
Cheers..
Vasu
** Reward Points if found useful **

Error: Unable to find any Adapter Engines

Hi all,
I am trying to execute a very simple scenario.
A xml-file is read from a drive by the XI system.
XI reads the values.
Another xml-file containing some parts of this info is written to another location.
I see that the file is read and removed.
However, when I check the monitoring I find follwing error message:
<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">AE_DETAILS_GET_ERROR</SAP:Code>
<SAP:P1>af.cx1.cernum05\cx1</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>Exception in SLD client: AbapSLDRequestHandler.exe: Unable to find any Adapter Engines</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error when reading the access data (URL, user, password) for the Adapter Engine af.cx1.cernum05\cx1</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Is there some configuration missing?
We are running XI3.0 SP9.
Thanks in advance.
Kind regards

Hi Geert,
My first guess is that something is not configured correctly. Try checking if your adapter engine is registered in the SLD:
In a browser, goto http://host:port/sld. Choose Technical Landscape. Under Technical System Type, select Exchange Infrastructure. You should have an entry like:
"Adapter Engine on cx1.cernum05"
If not, check the settings in Visual Administrator for the SLD Provider service and test the update from here.
Also check your receiver communication channel. Under Adapter Engine, it should say "Integration Server". If it says e.g. af.cx1.cernum05, your SLD has not been updated correctly.
Regards,
Thorsten

Problem posting message from adapter engine to IS

Hello,
We experience the next problem. We use JMS sender adapter to post message into XI. Message comes into the adapter engine and tries to post it into integration server. http://<host>:8000/sap/xi/engine?type=entry
When posting we get the (very generic) error:
Received HTTP response code 500..
The Adapter engine does a retry every 5 minutes.
After the 3th retry most of the status of the message in the adapter engine is set to NON_DELIVERED.
However for what ever reason sometimes the 2nd or 3th time the message does get processed to the IS.
Is there anyone who experienced similar problems or does anyone know a solution for this.
tnx
Emile

Hi,
Is this the problem with JMS adapter or with any other Adapter.
8000, is this the same port in smicm-->services. B'cos sometimes people might have a different instance number even.
Cheers,
Siva Maranani.

Exporting processed messages from adapter engine monitoring to excel

Hey experts,
I have some messages that are processed successfully. I can see them in the message monitoring for adapter engine in the RWB. I want to know if there is a way to export these messages to excel file.
Also we have a files archived by PI with a .001 extension attached to them. Is there a way to open these files and look at the processed messages?
Any help would be greatly appreciated.
Regards.

I can see them in the message monitoring for adapter engine in the RWB. I want to know if there is a way to export these messages to excel file.
I don't think so.But you can right click.Select View Source.And then save the message in a notepad.
Also we have a files archived by PI with a .001 extension attached to them. Is there a way to open these files and look at the processed messages?
I don't get this! You can open these files by doing a right click.Open with wordpad.

Post Installation steps for Messages archiving from Adapter engine

Hi,
Can any let me know the post installation steps for Archiving messages from AE.
We are archiving the messages from Integration Engine (BC_XMB).
This note refers to the Post installation steps... But i could not find them anywhere.
Note 790226 - Messages in AdapterEngine/PCK database do not get archived
Thanks,
Tanuj
Message was edited by:
Tanuj Kumar Bolisetty

Hi Tanuj,
have a look at note 872388
"2) For messages in the Adapter Framework: note 816022, question 8
(deletion) and
http://help.sap.com/saphelp_nw04/helpdata/en/cf/b2fc3f48ecc742e10000000a
1550b0/content.htm (archiving)"
Additionally consult the troubleshooting guide,page 110
Set the adapter service properties (note 791379)
Hope it helps
Jaime

To read data from Adapter engine table

Hello,
We have requirement to generate a summary of report with number of messages success and failed in XI with failure reason
I understand that we have to get the count of message from IE and AE and integrate it.
Can anybody help to know in which table data from IE and AE is stored and how can we access it
Also, any other solution to get the summary of count of interfaces running
Thanks in advance

Hi Anu.
In the Adapter side (not visible by data dictionary), the tables are:
XI_AF_MSG
XI_AF_MSG_AUDIT
In the Integration Server, the tables are:
SXMSPMAST or SXMSPMAST2
SXMSPEMAS or SXMSEMAS2
SXMSPVERS or SXMBPVERS2
SXMSCLUP or SXMSCLUP2
SXMSCLUR or SXMBCLUR2
SXMSPERROR or SXMBPERRO2
History
SXMSPHIST or SXMPHIST2
The integration server tables can change if the configure delete procedure is active (it can be principal table 1 or 2).
It´s better to use the runtime workbench reports delivered by SAP.
Regards.
Bruno.

Decoding BLOB data from Adapter engine Java Stack

Hi,
I am able to gain access to Java stack schema.
I am pulling out AUDIT_DATA field from BC_MSG_AUDIT.
This is a BLOB format data piece.
Is this Data stored in any specific encoding? or a normal UTF-8 string conversion will work?
Cheers,
Earlence

I've faced with same problem. What is the serialization scheme for AUDIT_DATA?

Unable to determine the adapter engine or sld connection error

1. Check wether the SLD is up or not
2. Note 764176 - Error in XI due to inconsistent SLD contents --> Follow this note.

Aswin..
Is that a question or answer or information to others?
VJ

Communication channel Adapter Engine

Hi
I'm having problems identifying if a communication channel is working.
I've created a JDBC communication channel but was unable to select the adapter engine from the drop down list as the list was blank.
In the Runtime workbench channel monitoring, the channel is not listed
So 2 questions
where is the config so that the adapter engine can be selected for the communication channel
and what is the procedure to activate the communication channel so that it can be seen in channel monitoring
all help gratefully received
Geoff

Hi,
You can monitoring your communication channel via :
http://<hostname>:5<sysnum>00/mdt/channelmonitorservlet
In this monitoring, you can see if he is functional. You can start / stop manually this communication channel too.
If you want see if the communication channel is actived, you can go to Integration Builder -> You open your communication channel and in Advanced Tab : you can see if he is actived or not.
Best Regards

Cache Refresh for Adapter Engine is not working

Hi,
our adaper engine is not working. At RTW no there are no channels visible and the button "Test Cache Connectivity" leads to a yellow icon for the adapter engine with the error text: "Attempt to fetch cache data from Integration Directory not yet started or still in process".
The error reason is at http://<j2ee host>:<port>/CPACache/history.jsp available: com.sap.aii.af.service.cpa.impl.exception.CPADirectoryCacheException: Couldn't open Directory URL (http://pixd1.digoff.no:55200/dir/hmi_cache_refresh_service/ext?method=CacheRefresh&mode=C&consumer=af.xd1.dat-dof-xi), due to: HTTP 403: Forbidden
The cache refreh request from adapter engine to directory gets an 403 error. What is strange: No problem, to execute that request in a browser, i get the right message, no fault.
I searched for notes or other threads, i could find only <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bc_xi/~form/handler%7b5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d373531383536%7d">SAP note 751856</a> , but it is valid for XI 3.0; we are on PI 7.0.
I checked out:
- no user blocked
- all system users have standard authorisations
- reimport of SAP BASIS SWC
- SICF services for XI active
- destination INTEGRATION_DIRECTORY_HMI working
Any idea, how i can get the adapter engine working?
Regards,
Udo

Hi,
There are two ways to display the content of the CPA cache refresh.
1. The Cache-Update Content-XML
Document can be stored in the Adapter Framework database (J2EE schema) for further analysis. Here you have to set the property in the J2EE Visual Administrator tool.
To do so, proceed as follows:
=>J2EE-service SAP XI AF CPA Cache
=> set property trackCacheUpdateXML= true
=> You can now display the cache update XML with the alias CPACache
=> View Cache Update History
=> View Cache Update XML
2. The content of the cache refresh from the Integration Directory intothe CPA cache can be written to an XML file: Here you have to set the property inthe J2EE Visual Administrator tool:
=>J2EE-service SAP XI AF CPA Cache
=> set property J2EE service SAP XI AF CPA Cache cacheUpdateDebugFile = true
=> the CPA cache refresh XML file will be in the server(0) directory search for the following file names:
=> value of the property cacheUpdateDebugFile.deltaif you intend to see the delta refresh accordingly and the value of the property cacheUpdateDebugFile.full if
you intend to see the full cache refresh content
Note: After your analysis, do not forget to reset the properties value to false.
You can delete the XML cache-
refresh table: alias CPACache
=> View Cache Update History
=> Delete History
Also check out the user and its permission.
regards
Aashish Sinha
PS : Reward points if Helpful

Split Mapping message IDs in Adapter Engine

Hi Experts,
I have to get the message ID of all messages from adapter engine where these messages are created as a result of a split mapping.
I only have the inbound message ID in integration engine. Is there any place where this correlation is maintained.
Regards,
Ravi.

hi,
Check out this blog also:
/people/siva.maranani/blog/2005/05/25/understanding-message-flow-in-xi
Rgd, Adapter Engine:In general
http://help.sap.com/saphelp_nw70/helpdata/en/8f/d906d01f77fa40a4c84683c3f8326f/content.htm
Message Flow for some extent:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/02706f11-0d01-0010-e5ae-ac25e74c4c81
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e21106cc-0c01-0010-db95-dbfc0ffd83b3
hope this may help you,
regards,
srinivas

CCMS Adapter Engine monitoring

Hi,
CCMS has been configured in our land scape long back. this configuration gets data from adapter engine and display it. We need to modify this. When we checked the configuration all Integration engine errors are being gathered using standard MTE classes and respective auto reaction methods are set.
But where as for Adapter engine monitoring a custom MTE's are created in below format.
<SID>\<SID> 00 Serv 2345672 pidev\Services\Adapter Framework\Messaging System\Sender Services\BS_Econ\Error Backlog
This has no standard method assigned to it. Searched over SDN, no GRMG is configured for polling this data. Please help in understanding how data can be polled for CCMS with out a method?

Hi ,
please check the below link for GRMG configuration steps and check the SAP Note 634771.
Configuring the CCMS Heartbeat Monitor for Java Components
http://help.sap.com/SAPHELP_NW04s/helpdata/EN/e5/5d1741b393f26fe10000000a1550b0/content.htm
Regards
srinivas

RFC adapter - AE_DETAILS_GET_ERROR - no adapter engine

Hello,
have a strange error.
Our scenario connects two R/3 systems via RFC adapter (outbound / inbound) for an RFC in a standard R/3 function module SUSR_ZBV_GET_REMOTE_PROFILES.
The RFC is synchronous.
When starting the RFC call from the sender system the error message in the trace is "exception while reading from SLD:Property sap_xiadapterservice.adapterType does not exist".
Message in RWB:
"Transmitting the message using connection http://abc038.ceu.test.com:8077/sap/xi/engine?type=entry failed, due to: XIServer:AE_DETAILS_GET_ERROR:Property sap_xiadapterservice.adapterType does not: Unable to find any Adapter Engines."
- SLD connection is working
- Vis.Admin.: no problems found
(SAP RFC adapter active)
- Component monitoring: no errors
- all rfc connections checked: ok
Does anybody have an idea, how to fix that?
Best regards
Dirk

Hello Dirk and all posters,
We get the same problem just as you described.
We also see no entries in the sxi_cache part for the adapter engine which indicates a problem in getting AE metadata from the SLD.
I see we are all not alone so i believe SP12 is the cause for the problem.
We have another SP11 system that works well.
We tried all those things to understand the problem:
1. look at the structure of the calsses maintained in the SLD to make sure the property "adapterType" exists.
2. Checked the log of the SLD with level "Finest" to make sure the data for the property is sent - all OK.
3. Try to completely delete SLD and reimport CIM 1.4 and CR content 2.0 - all the latest from the web - problem still exists.
4. Put a huge trace on the RFC gateway in the ABAP engine to make sure all XML data is received from SLD server including specific proprty. all ok.
5. Of course we made sure all caches are refreshed, access to SLD is performed all right (logs, traces).
6. Try to disable SM59 entry: SAPSLDAPI and look at the trace in SXMB_MONI. It shows error of connection of course instead of the error of the non exsitene property. But it still shows the error for not getting the access data - so this is only a side affect of the real problem.
Now, as you can see we turned the system from inside out.
I beleive the problem is SAP's problem regarding the parsing of the COM model in the CIM client. I believe that if i could debug the actual abap that parses the XML in the ABAP WAS i would find the problem - i could'nt find a way of debugging the actual processing of a message in QRFC so i'm stuck here.
- Does all of you who have the problem has SP12 ?
- Does any one have an idea of anything else we can all check ?
Good luck for us all :->
Yoad Snapir.

Error in Adapter engine in RWB

Hi,
I'm facing 2 type of issues in RWB,
Issue 1) Adapter Engine is in Red State in Component monitoring,
Error: Details for 'Is the Adapter Engine Running?'
Response from Adapter Engine: Fatal ArchiveJob (Archiving) failed.(Details: Code: MS.JOB.ARCHIVE; Location: com.sap.engine.messaging.impl.core.job.executor.ArchiveExecutor; Reason: java.io.IOException: The HTTP request of command "MODIFYPATH" did not reach the XMLDAS. This may indicate that the credentials for the HTTP destination have expired.; Time: 31.03.2011 00:00:05)Response from Adapter Engine: Fatal ArchiveJob (Archiving) failed.
2) If I click, any one of the option like Communication Channel monitoring, Engine Status etc, I'm getting the error
"Internet Explorer cannot display the webpage"
It seems to be the URL to open these component(Communication Channel monitoring, Engine Status etc ) is wrong. Fromwhere the URL address is taken? Where we need check the host name??
I searched in sdn, but could not find any related topics.
Kindly help me resolve this issue ASAP.
Thanks & Regards,
Baskaran K

Hi Baskaran,
For 1), did you check if the XML DAS communication user (used in destination "DASdefault") is configured correctly according to the documentation http://help.sap.com/saphelp_nwpi71/helpdata/EN/43/68fac39a363d33e10000000a11466f/frameset.htm and is assigned to the "XMLDASSecurityRole" role?
And check if you have configured the rules for your Archiving job (Component Monitoring -> Adapter Engine XIE -> Background Processing).
It seems the archiving does not work because of configuration issues.
An archiving job without rules means: all messages are relevant for archiving. The delete job will only delete messages which are not relevant for archiving. So it does not do anything in this system. It can lead to the database table keeps growing, if it's the case too.
You should check the archiving configuration so that the archiving job runs successfully.
If you do not want to archive the messages, please deactivate the archiving job. Then the delete job should clean the old messages with the next execution.
You may delete it straightly on the Background Processing.
For the 2), "Internet Explorer cannot display the webpage", try using the compatibility mode of your browser.
Regards,
Caio Cagnani

Unable to communicate from adapter engine to Integration engine

Similar Messages

Maybe you are looking for