Communication channel Adapter Engine

Hi
I'm having problems identifying if a communication channel is working.
I've created a JDBC communication channel but was unable to select the adapter engine from the drop down list as the list was blank.
In the Runtime workbench channel monitoring, the channel is not listed
So 2 questions
where is the config so that the adapter engine can be selected for the communication channel
and what is the procedure to activate the communication channel so that it can be seen in channel monitoring
all help gratefully received
Geoff

Hi,
You can monitoring your communication channel via :
http://<hostname>:5<sysnum>00/mdt/channelmonitorservlet
In this monitoring, you can see if he is functional. You can start / stop manually this communication channel too.
If you want see if the communication channel is actived, you can go to Integration Builder -> You open your communication channel and in Advanced Tab : you can see if he is actived or not.
Best Regards

Similar Messages

Communcation channel - Adapter engine field is empty.

Hello Gurus,
After pointing XI to a seperate SLD, the Adapter engine field (the pull down) in the "Communication channel" is empy. The adatpers are visible and no problem there. The business systems apprears to be O.k in the new SLD. We perfomed a export of technical and Business systems from old SLD and new SLD.
Help will be awarded with points.
-N.S

Hi,
Refer this blog:
/people/venugopalarao.immadisetty/blog/2007/03/15/adapter-engine-cannot-be-found-in-integration-directory
Regards
Suraj

AS2 adapter not visible in Receiver Communication Channel (Adapter Type)

Hi,
We wish to connect to our customer using AS2 adapter as the receiver communication channel.
We are unable to find the "AS2 adapter type in the in "adapter type" field. (Choose Adapter Metadata).
Our XI version is as following (NW04S_11_REL Service Pack 11).
Version
Service pack:
11
Release:
NW04S_11_REL
Is there add-on to be installed on XI or is there any activation required?
Thanks in Advance,
Rehan

SAP_BASIS
Release 700
Level 0011
Highest Support Package: SAPKB70011

Adapter Engine field is blank while creating RFC recieving Comm Channel

Dear XI gurus
I have just installed XI server and also did the configuration and everything seems to work fine. I did SLD configuration, mapping etc.,
Then went to Configuration module and am trying to create a sender communication channel (Adapter Type RFC).
The Transport Protocol and Message Protocol fields got automatically filled by 'RFC' and 'RFC (RFC XML)' respectively.
However Adapter Engine field is showing up blank and when I try to select from the drop down menu, it is also blank.
I did search for other postings and tried the following as per the suggestions
Went visual administrator (by clicking on go.bat) and made sure that the cluster->Service and all the services needed for SAP XI Adapters are up and running
I would appreciate if you have any other feedback on this problem.
Thanks
Ram

Thanks a lot for your response, I will try that again and will let you know.
Meanwhile I also followed tech note 1031321 which said the following.
2. To register the Adapter Engine, you have to restart the following applications:
sap.com/com.sap.aii.af.app
sap.com/com.sap.aii.af.cpa.app,
But this didn't help. I will try your suggestion

Error in Adapter engine in RWB

Hi,
I'm facing 2 type of issues in RWB,
Issue 1) Adapter Engine is in Red State in Component monitoring,
Error: Details for 'Is the Adapter Engine Running?'
Response from Adapter Engine: Fatal ArchiveJob (Archiving) failed.(Details: Code: MS.JOB.ARCHIVE; Location: com.sap.engine.messaging.impl.core.job.executor.ArchiveExecutor; Reason: java.io.IOException: The HTTP request of command "MODIFYPATH" did not reach the XMLDAS. This may indicate that the credentials for the HTTP destination have expired.; Time: 31.03.2011 00:00:05)Response from Adapter Engine: Fatal ArchiveJob (Archiving) failed.
2) If I click, any one of the option like Communication Channel monitoring, Engine Status etc, I'm getting the error
"Internet Explorer cannot display the webpage"
It seems to be the URL to open these component(Communication Channel monitoring, Engine Status etc ) is wrong. Fromwhere the URL address is taken? Where we need check the host name??
I searched in sdn, but could not find any related topics.
Kindly help me resolve this issue ASAP.
Thanks & Regards,
Baskaran K

Hi Baskaran,
For 1), did you check if the XML DAS communication user (used in destination "DASdefault") is configured correctly according to the documentation http://help.sap.com/saphelp_nwpi71/helpdata/EN/43/68fac39a363d33e10000000a11466f/frameset.htm and is assigned to the "XMLDASSecurityRole" role?
And check if you have configured the rules for your Archiving job (Component Monitoring -> Adapter Engine XIE -> Background Processing).
It seems the archiving does not work because of configuration issues.
An archiving job without rules means: all messages are relevant for archiving. The delete job will only delete messages which are not relevant for archiving. So it does not do anything in this system. It can lead to the database table keeps growing, if it's the case too.
You should check the archiving configuration so that the archiving job runs successfully.
If you do not want to archive the messages, please deactivate the archiving job. Then the delete job should clean the old messages with the next execution.
You may delete it straightly on the Background Processing.
For the 2), "Internet Explorer cannot display the webpage", try using the compatibility mode of your browser.
Regards,
Caio Cagnani

Value for Retry Interval in Sender File Communication Channel

Hi All,
I am trying to set Retry Interval for File Adpter as null as per Help.
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/e3/94007075cae04f930cc4c034e411e1/content.htm">http://help.sap.com/saphelp_nw04/helpdata/en/e3/94007075cae04f930cc4c034e411e1/content.htm</a>
But I am getting error in Communication channel/Adapter Monitoring as invlaid configuration. How to specify null value as described.
Thanks in advance.
Regards,
Sudharshan

Hi Michal,
I am trying this option to solve the problem in following thread.
Problem with Sender File Content Conversion Communication Channel
0 is considered to be a valid Configuration, but I dont know whether it is equivalent to null that they are describing.
Regards,
Sudharshan

How many Communication Channels do we need?

Hi Friends,
I am doing a simple IDOC-XI scenario. I have created two software components for the sender and receiver systems. Do i have to create a single communication channel or two?. Coz the Idoc from the sender system comes as an inbound into the XI Server(Communication Channel 1) and from here the idoc goes to the receiver system (Communication Channel 2). Correct me if iam wrong. In case we need to create a single communication channel(Adapter type XI, Radio button Sender is not enabled here?? ) what should be the RFC Destination?. Is it the sender system or the XI Stystem or the receiver system??.
Prompt replies would be rewarded.
Thanks in advance.
Regards,
Tamilarasan.

Hi Tamilarasan,
- you can only create IDOC receiver channels
- if you have two R3 systems you have to create
two communication channels (one if the receiveer is the first R3 and the second one if the receiver will be the second R3)
so if you have:
a) firstR3 -> XI -> secondR3 scenario
you have to create only one communication channel for idocs
if you have:
firstR3 -> XI -> secondR3
firstR3 <- XI <- secondR3
then you'll need two channnels:)
IDOC configuration reference:
IDOC adapter
http://help.sap.com/saphelp_nw04/helpdata/en/ab/bdb13b00ae793be10000000a11402f/content.htm
IDoc Processing with the IDoc Adapter
http://help.sap.com/saphelp_nw04/helpdata/en/ab/bdb13b00ae793be10000000a11402f/frameset.htm
Regards,
Michal

Unable to Find out Adapter Engine in the Communication Channel

Hi Experts,
I am Unable to select the Adapter Engine As Integration Server in the File Sender Communication Channel.
Please Let Me Know
Regards
Khanna

HI Khanna
Check the SLD that Adapter Engine is insatlled and all the adapter has the metadata there.
Go to Transaction Code SXI_CACHE in the Inetgration Server(XI- ABAP stack) Then you can see the list of components.
Just have a look into Menu Bar - in there goto : GoTo->Adapter Engine Cache ( if the status is green - then it is correct-otherwise you need to refreshit.)
You just go thru mentioned document from service.sap.com/nw04
You will get the full info about that.
/people/michal.krawczyk2/blog/2005/09/07/xi-why-dont-start-searching-for-all-errors-from-one-place
/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions
http://help.sap.com/saphelp_nw2004s/helpdata/en/0d/28e1c20a9d374cbb71875c5f89093b/frameset.htm
Just try with Visual Administrator to check the services for the adapter engine are running or not
All services starts with SAP XI..
SAP XI AF Core
SAP XI AF CPA Cache
SAP XI AF Messaging
SAP XI Adapter XI
SAP XI AF Security
Check SAP note on CPACache- 741214 and also 824236.
Let me know if any errors..
Cheers..
Vasu
<i>** Reward Points if found useful **</i>

No communication channels visible in the adapter engine

Hi Experts,
We are getting the issue in our PI system that No communication channels are visible in the adapter engine in our PI devolopment system.
We had checked the following and all are working fine.
1) SLDCHECK successfull
2) SLDAPICUST successsfull
3) Cache is successfull
4) Tried to restart the J2EE application com.sap.aii.af.ms.app in NWA
but still getting same issue
5) All standard users like PI* users are not locked, all are fine
6) INTEGRATION_DIRECTORY_HMI connection is also working fine.
7) Tried with whole system including ABAP restart- getting the same
issue that Commnunication channel entries are not visisble in CC monitoring tab in AE.
Can you please guide us to fix this issue as it is impacting our interfaces testings.
Thanks in advacne
Srikanth

Hi,
>>>>>>> No communication channels are visible in the adapter engine.
You have to do full cache refresh, by using the below URL:
http://<host name>:<port>/CPACache/refresh?mode=full
I hope that, you will out of the issue.
Regards,
Rajesh

No Integration Server under Adapter Engine at Communication Channel

Hello all,
This is new PI7.0 install.
I configured a file Adapter communication channel for an Integration Scenario.
At field "Adapter Engine" under Parameters tap I am not able to select the Integration Server.
Pull down menu is empty.
I did sxmb_adm and blog 6077 that got "Integration Server" in file adapter. Later to that file to file scenario worked yesterday. However after java+abap stack complete restart (to cleanup unwanted manually created business system of type WEB AS ABAP) the problem came back today.
I repeated again same blog /people/venugopalarao.immadisetty/blog/2007/03/15/adapter-engine-cannot-be-found-in-integration-directory   sxmb_adm, sldcheck, rz70 all looks good, but no luck.
There is a note from forum to change the content maintenance under
SLD->Administration->Content Maintenance->Subset (Landscape description)...
Need some pointers on what to change & get the file adapter to work? Thanks.
Another observation is all adapters got empty menu (no Integration Server). However IDOC, HTTP got integration server populated.
====================
Re: No Integration Server under Adapter Engine at Communication Channel config
Posted: Sep 12, 2007 4:46 PM    in response to: Jochen Schertel
Hi All,
the problem was related to missing some Associations under Contend Maintenance for the Integration Server.
After implementing again, the problem was solved!
Regards,
Jochen
====================

Hi Jochen,
Can you please check following parameters in sxmb_adm on your application server.
Goto TC : sxmb_adm...select Integration Engine configuration n check whether you have maintained global configuration data as
Role of Business System : Application system
and Corresponding Integ. Server : http://xi hostname:port/sap/xi/engine?type=entry
Also check if you have created following RFC destinations:
1. INTEGRATION_DIRECTORY_HMI(H)
2.LCRSAPRFC (TCP/IP)
3.SAPSLDAPI
Nilesh
Nilesh

Adapter Engine Name is not displayed in Communication channel

Hi All,
In Integration Directory -- Service without party -- Business system -- communication channel -- when we create new communication channel then go ahead selecting File , JDBC, Mail adapter. ADAPTER ENGINE IS DISPLAYED BLANK.
Please let me know your valuable inputs.
Regards
Shiva

I have performed all the above given instructions, but the issue is still pending.
Steps followed :
1. Performed all the steps in RZ70 as instructed.
2.Downloaded the TPZ file and assigned it in the required path
3.Adapter Engine is already assigned in the SLD.
Can you let me know, whether to assign hostname, IPaddress or fully qualified domain name in the exchange profile( where exactly in JAVA stack and ABAP stack)
Kindly request you to provide further inputs.
Thanks for your valuable inputs
Regards
Shiva

"Adapter Engine is missing in Communication Channel".

Hi Experts,
I am Unable to Find out the Adapter Engine As Integration Server in the File Sender Communication Channel.
please let me know
Regards
Khanna

hi,
/people/venugopalarao.immadisetty/blog/2007/03/15/adapter-engine-cannot-be-found-in-integration-directory
note : points pls if it helps you

Communication channel monitoring (adapter engine) in ccms (rz20) available?

Hi,
we have problems in our xi system (PI 7.0, SPS10). The adapter engine can only be monitored in the communication channel monitoring, available in the runtime workbench!
There sometimes errors disappear. At the moment these errors accumulate!
Is it possible to view these errors/ alerts in the ccms (rz20) monitoring?
So we don't look all the time in the communication channel monitoring!
Have anybody an idea?
Regards,
matthias isenburg

Have u seen the discussion
Re: How do I configure an auto-email alert for Adapter engine errors
Regards,
Prateek

Unable to see audit log in Adapter Engine (Communication channel monitoring

Hi
I am unable to see audit log in Adapter Engine (Communication channel monitoring).
Could please suggest what parameter to set to display in PI 7.0 visual administrator.

/people/kenny.scott/blog/2009/03/08/pi-71-af-messaging-system-audit-log-persistence
Did you tried this paramter even though the above is applicable for PI 7.1
Rajesh

FQDN problem in adapter engine,communication channel monitoring

Hi all,
Recently i configured FQDN for PI system while configuring END to END monitoring. Everything is going fine and end to end monitored worked smoothly.
But Problem started in comminuication channel monitring.adapter engine status and others. Because its trying to retrieval the URl without FQDN and its showing an error as requested resource does not exist.
I changed the exchange profile paramters also. But still i am afcing the problem.
So,please suggest me to overcome from this issue.
Regards
Vijay

/people/kenny.scott/blog/2009/03/08/pi-71-af-messaging-system-audit-log-persistence
Did you tried this paramter even though the above is applicable for PI 7.1
Rajesh

Communication channel Adapter Engine

Similar Messages

Maybe you are looking for