Unable to complete 10.1.2 update - "Could not validate CoreFP"

The new iTunes update just won't finish. I'm getting the following error
"The update 'iTunes' can't be installed.
The Installer could not validate the contents of the 'CoreFP' Package. Contact the software manufacturer for assistance"
Also, after 2 failed attempts to install the update (one via software update and one via the .dmg) I've experienced Kernel panics. Not sure if it's related or not, but it's worth mentioning

I was having this same issue today. The CoreFP.pkg file was also causing my Time Machine backups to fail since last Sunday.
I ran 'Verify Disk Permissions', 'Repair Disk Permissions', and 'Verify Disk' in Disk Utility ('Repair Disk' was grey out, otherwise I would have tried that too). The details window didn't show any errors, but when I tried installing the iTunes update again it worked without issue, and now Time Machine is able to backup successfully.

Similar Messages

I am unable to synch my iPhone to my laptopI have tried to carry out software updates - I get a message saying that the updates could not be completed as I am not connected to the internet - despite being connected to the internet!

I am unable to synch my iPhone to my laptopI have tried to carry out software updates - I get a message saying that the updates could not be completed as I am not connected to the internet - despite being connected to the internet!

What OS on your Mac?
What iOS on your phone??

TS2529 I am unable to backup my iphone 5 iOS 6.0.1 (connected directly to laptop USB) with my itunes 11 for Win 7 64bits. The process starts and fails to complete giving the error: itunes could not complete backup of iphone because iphone disconnected.

I am unable to backup my iphone 5 iOS 6.0.1 (connected directly to laptop USB) with my itunes 11 for Win 7 64bits. The process starts and fails to complete giving the error: itunes could not complete backup of iphone because iphone disconnected.
I have restarted the PC, the iphone, changed the lightining cable and nothign resolves it: backup never completes.

Hi, I disabled the antivirus and the firewall. Same result
I even deleted the backup folder inside C:\Users\...\Apple Computer\MobileSync\Backup to eliminate any corruption in the old backup files.
Nothing changed: Session either times out or i get the same error message: itunes could not back up iphone because iphone disconnected. It always happens during step 3 out of 4 which is "transfering purchased apps from iphone to PC" and comes after step 2 which is backup.
My iphone 5 is not jailbroken, and is a factory unlocked phone.
Any other suggestion?
Pls help

7.1 update to IPad now unable to use FaceTime and iMessage says could not sign in check your network connection. Why am I seeing this when I am connected?

7.1 update to IPad now unable to use FaceTime and iMessage says could not sign in check your network connection. Why am I seeing this when I am connected?

Check Settings>General>Date & Time>Set Automatically>On. Make sure that the time zone setting is also set correctly.
If that didn't solve the problem, restart your iPad and try again. If that fails, reset your iPad and try again.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

Contact Person Replication Problem - Updating could not be completed

Dear Experts,
I'm facing the problem when replicating contact person from CRM to R/3. It only happen when changing the bp/contact person that paired (with contact person relation type) to more than 5 customer/bp and it always error when replicating to R/3.
If I trace the probelm in SMW01, the error message appreared is : Updating could not be completed. I'am affraid the workload in R/3 system is to high or the time that given for processing the BDOCS is too short.
Is there any configuration to set the time for processing the BDOCS from CRM?
Or is there any solution to solve this issue?
Please helps
Many thanks in advance.
Regards
eddhie k

Hi,
I am facing same problem, have u got the solution for this problem?
Thanks,
Harshal

Help with CS5 Updates Failed, Updates could not be applied, Error Code U43M1D207

CS5 Updates Failed, Updates could not be applied, Error Code U43M1D207
Can anyone help with this error code?
Products installed and activated on new laptop
Unable to update using Adobe Application Manager
Thank you

I followed up on the Photoshop Error code and found some suggestions by Jeff Tranberry and Pete Green here.
Michael

"The update could not be installed" message

Every time I start Firefox I get a dialog box with this message:
The update could not be installed. Please make sure that there are no other copies of Firefox running on your computer and then restart Firefox to try again. [OK button]
I click the OK button, the box disappears, then Firefox starts up.
It's annoying. I have tried updating Firefox in the Admin account on this computer, but even that has not worked. Why might this be happening, and what can I do about it?
PS I don't do online forums, if you are a "Firefox expert" answering thsi question, by all means post the reply on the forum, but please also email it to me at my registration address. Thanks.

So this is rapid updating? I had to stop using V5 because of problems. V5.01 did improve things. FF was still my default browser so I did get to follow the upgrade to V6. Now the suggestion that completely removing it and editing the registry will enable me to see if V6 is worth having. Please, this is not rapid. This is the kind of problem that stopped me using Norton, having to deal with more issues that actually using the software.
No doubt I will attempt this sometime, by then though I may have just got used to Chrome [yuk]. It is not a good sign that being more news worthy is better than having a working product. I'm a web and app developer and it has served me well until V4 now it is just getting in the way and Mozilla seem to think that just one more rapid release [with problems like this] may just solve the problems.
I think not after all I'm still waiting for MS to fix things that should have been better 10 years ago.
I removed my current version. I check that the folders were gone. I reinstalled. I got an error:
Error Platform version '5.01' is not compatible with minVersion >=6.0 maxVersion <=6.0

Unable to execute Test-Mailflow cmdlet. Could not find any available Domain Controller

I started receiving this error in SCOM while testing Exchange 2007 Mail flow. Normally the tests work just fine, and when I execute"test-mailflow" on the offending server, it works just fine. The alert doesn't have enough details to find out what
is wrong. Can anyone help out?
Alert Description:
Unable to execute Test-Mailflow cmdlet. Could not find any available Domain Controller
Environment: SCOM 2012 R2 UR4
MP: Exchange 2007 MP, latest update
Monitor: Exchange 2007 Test Local Mail Flow Monitor
Brody Kilpatrick

Hi,
After you execute"test-mailflow" on the offending server, please also look into event logs to check is there any errors or warnings. SCOM is a tool to collect information, from my point of view, this message is collected from Exchange server, so
you may need to check event viewer.
In addition, please also make sure your Exchange environment is under monitored. And have you followed the Exchange 2007 MP guide to configure the MP?
Make sure the Client Access Server is under monitored, you may check the Application Event log on the Client Access Server, and make sure there are no errors or warnings indicating a problem with the Client Access Server.
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Software Update: Could not be Verified

I have a MacBook Pro running Mac OS X 10.7.3 Lion. Since I have gotten it, I've used Software Update without experiencing any problems - untill now. Now, whenever I try to download/install updates, I get an error message saying "The update could not be verified. It may have been corrupted or tampered with during downloading. The update will be downloaded and checked again the next time that Software Update runs." What is going on, and how can I fix this?

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of this exercise is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem(s)?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Macbook Air 10.8.2 crashes after update. Gave a message "Some updates could not be performed due to an error"

3 of our mid 2012 Macbook Airs10.8.2 crash after update. Gave a message something like this "Some updates could not be performed due to an error" and now when rebooting I see panic...Unable to find driver for this platform...
I don't want to udate any more of these (I have 31) until I know what is causing this problem. Will I have to reimage these machines?

If you don't already have a current backup, back up all data, then reinstall the OS. You don't need to erase the startup volume, and you won't need the backup unless something goes wrong. If the system was upgraded from an older version of OS X, you may need the Apple ID and password you used to upgrade.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
If you installed the Java runtime distributed by Apple and still need it, you'll have to reinstall it. The same goes for Xcode.

Adobe Extension Manager CS6 update could not be applied

I have been trying to update my Adobe Extension Manager in CS6 to version 6.0.6 and when I do I receive the error: "update could not be applied ". The only option then is the close. How can this problem be corrected?
Note: I'm using Adobe Creative Suite 6 Design and Web Premium on Windows 7
Okay, I just tried uninstalling it and reinstalling after I deleted all mxi files/folders from BOTH "C:\ProgramData\Adobe\Extension Manager CS6\EM Store" AND "C:\Users\<UserName>\AppData\Roaming\Adobe\Extension Manager CS6 folders. I then tried installing the program again. I then tried updating it using Adobe Application Manager and again it fails and spits back the following code: U44M1P7. I opened the extension manager and checked on the version number mentioned which was 6.0.0.3.4.8 which to me is strange considering that I installed 6.0.6 after the uninstall.
I can get to the Adobe Extension Manager CS6 6.0.6 06-04-2013.log.gz file but I haven't a clue as to how to open it or attach it to this message.
Message was edited by: sperry1975

The error message in the log file is:
DF045: File corruption detected. Re-install the product & then apply the patch again. (Can not repair file "C:\Program Files (x86)\Adobe\Adobe Extension Manager CS6\Adobe Extension Manager CS6.exe")(Seq 13)
You can simply delete the "C:\Program Files (x86)\Adobe\Adobe Extension Manager CS6" folder, then download and install http://download.macromedia.com/pub/dw_exchange/extension_manager/win/AdobeExtensionManager 6.0.6All.zip. You will have the latest version of Extension Manager.

When I click on Firefox it opens with a box that says "Foxfire is installing your updates and will start in a few moments-. " then it says "Software Update Failed (in blue) with an exclamation mark inside a yellow triangle) The update could not be install

When I click on Firefox the first time it says "Foxfire is installing your updates and will start in a few moments…. (with a green bar)" then it says "Software Update Failed (in blue) with an exclamation mark inside a yellow triangle)
The update could not be installed. Please make sure there are no other copies of Firefox running on your computer, and then restart Firefox to try again." When I click the ok, Firefox opens up. If I open another Firefox window with the previous one still running, it doesn't give me any of these messages, it just opens normally.
== This happened ==
Every time Firefox opened

If you can't install on top of the current installation then you need to delete or rename the current Firefox program folder to do a clean install.
It is possible that your security software is using or locking files, so you can try to temporarily disable that software during the installation.

An update tries to run, but an error message stating "The update could not be installed. Please make sure there are no other copies of Firefox running on your computer, and then restart Firefox to try again." I can't open Firefox

I click on Firefox and it says that Firefox is installing your updates and will start in a few minutes. Then I get "The update could not be installed. Please make sure there are no other copies of Firefox running on your computer, and then restart Firefox to try again." this cycle never ends. Do I need to deinstall Firefox and re-install? If I do that, do i lose all of my bookmarks, etc?

See http://kb.mozillazine.org/Software_Update (Software Update not working properly)
Remove the files in the updates and updates\0 folder:
*C:\Documents and Settings\<user>\Local Settings\Application Data\Mozilla\Firefox\Mozilla Firefox\updates
*(%USERPROFILE%\Local Settings\Application Data\Mozilla\Firefox\Mozilla Firefox\updates)
*C:\Program Files\Mozilla Firefox\updates
*Do a clean reinstall and download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
*Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer. Do not remove personal data when uninstalling.
*It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
You can skip the step to create a new profile, that is not necessary for this issue.
See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

I recieved a notice that there was an update for Elements 13 but when I try to install it it stop's half way through then I get the error message that "updates could not be applied" I have tried several times and it continues to give me the error. What is

I get a message that an update is available and when I install it the update stops half way through and I get the error code: U44M1I210 for Camera Raw and Elements 13.1 updates. I get the message "UPDATES COULD NOT BE APPLIED" Can someone help with this? Thank you. David

drmeyers381
Thanks for the follow up.
Is your Premiere Elements 13 on Mac computer?
I have not seen much in the way of alternatives coming from Adobe on the Premiere Elements 13.1 failed updates.
But there seems to be several discussions on U44M11210 in the CC products...one
Update failure. (U44M1I210) | Adobe Community
You could try the uninstall, free ccleaner, reinstall with antivirus and firewall(s) and then try for the Help Menu/Update for 13.1..
If Mac, https://www.piriform.com/mac/ccleaner
If Windows, CCleaner - PC Optimization and Cleaning - Free Download
The CC people seem to have the advantage of an online download of their update as well as the one via the Help Menu/Update.
Premiere Elements does not have that perk - update only via Help Menu/Update.
Please review and consider and please let us know of your progress as your schedule permits.
Thank you.
ATR

Cannot delete e-mail. I have three e-mail accounts, two of which I can delete e-mails. Whenever trying to delete e-mails in the thirs account, I get the following message "Unable to move message. This message could not be moved to the mailbox Trash".

Cannot delete e-mails. I have three e-mail accounts. Two I have no problem with but I cannot delete e-mails from the third account. Whenever trying to delete, I get a amessage which states "Unable to move message. The message could not be moved to the mailbox Trash."

Back up all data. Rebuild the mailbox. Try again to delete the message.

Unable to complete 10.1.2 update - "Could not validate CoreFP"

Similar Messages

Maybe you are looking for