Unable to connect Dial up connections

We are having dialup 15 connections in router 3845 model IOS version 12.4 1A.
We are unable to have a connection between dialup branches to headquarter. these are the command
aaa new-model
aaa authentication login telnet local
aaa authentication login ppp local
aaa authentication ppp ppp local
aaa authorization network ppp local
aaa session-id common
interface Group-Async1
description "ASYN-GROUP"
ip unnumbered GigabitEthernet0/1
encapsulation ppp
ip tcp header-compression
async dynamic routing
async mode interactive
peer default ip address pool pool
ppp authentication pap chap ppp
ppp authorization ppp
group-range 1/0 1/15
line aux 0
stopbits 1
line 1/0 1/15
login authentication local
modem Dialin
modem autoconfigure discovery
autoselect during-login
autoselect ppp
flowcontrol hardware
ip local pool pool 192.168.100.1 192.168.100.30
ip classless
When I tried to debug I found the below output :
RDCCI_2ND_HQ#
000381: *Sep 17 10:45:43.823: Modem 1/12 ACF: State: Ringing
000382: *Sep 17 10:45:43.823: Modem 1/12 ACF: Event: Incoming Ring
RDCCI_2ND_HQ#
000383: *Sep 17 10:45:45.295: Modem 1/12 ACF: Event: Hook state: Off Hook Answering
000384: *Sep 17 10:45:45.295: Modem 1/12 ACF: State: Answering
RDCCI_2ND_HQ#
000385: *Sep 17 10:46:06.723: Modem 1/12 ACF: Event: CONNECT V34/LAPM/V44/24000:TX/26400:RX
000386: *Sep 17 10:46:06.723: Modem 1/12 ACF: State: Connected
000387: *Sep 17 10:46:07.695: TTY1/12: DSR came up
000388: *Sep 17 10:46:07.695: tty1/12: Modem: IDLE->(unknown)
000389: *Sep 17 10:46:07.695: TTY1/12: EXEC creation
000390: *Sep 17 10:46:07.695: AAA/BIND(00000017): Bind i/f Async1/12
000391: *Sep 17 10:46:07.695: TTY1/12: create timer type 10, 30 seconds
RDCCI_2ND_HQ#
000392: *Sep 17 10:46:11.071: TTY1/12: Autoselect(2) sample [suppressed--line is not echoing]
000393: *Sep 17 10:46:11.071: TTY1/12: Autoselect(2) sample [suppressed--line is not echoing]
000394: *Sep 17 10:46:11.075: TTY1/12: Autoselect(2) sample [suppressed--line is not echoing]
000395: *Sep 17 10:46:11.075: TTY1/12: Autoselect(2) sample 7EFF7D23
000396: *Sep 17 10:46:11.075: TTY1/12 Autoselect cmd: ppp negotiate
000397: *Sep 17 10:46:11.075: TTY1/12: pause timer type 10 (OK)
000398: *Sep 17 10:46:11.075: TTY1/12: EXEC creation
000399: *Sep 17 10:46:11.075: TTY1/12: create timer type 1, 600 seconds
000400: *Sep 17 10:46:11.075: As1/12 PPP: Consuming data in TTY1/12 receive queue
000401: *Sep 17 10:46:11.075: APPP1/12: Input packet, len = 27, header = FF 3 C0 21
000402: *Sep 17 10:46:11.075: As1/12 PPP: Caching packet rcvd on TTY1/12
000403: *Sep 17 10:46:11.075: Async1/12: Setup PPP framing on TTY1/12
000404: *Sep 17 10:46:11.075: TTY1/12: destroy timer type 1
000405
RDCCI_2ND_HQ#: *Sep 17 10:46:11.075: TTY1/12: no timer type 0 to destroy
000406: *Sep 17 10:46:11.075: TTY1/12: no timer type 2 to destroy
000407: *Sep 17 10:46:11.075: As1/12 PPP: Async Protocol Mode started for 0.0.0.0
000408: *Sep 17 10:46:11.075: As1/12 PPP: I pkt type 0xC021, datagramsize 27 link[ppp]
000409: *Sep 17 10:46:11.075: As1/12 PPP: I pkt type 0xC021, datagramsize 27 link[ppp]
000410: *Sep 17 10:46:11.075: As1/12 PPP: Processed packet cached during autoselect
000411: *Sep 17 10:46:11.075: As1/12 LCP: I CONFREQ [Closed] id 0 len 23
000412: *Sep 17 10:46:11.075: As1/12 LCP:    ACCM 0x00000000 (0x020600000000)
000413: *Sep 17 10:46:11.075: As1/12 LCP:    MagicNumber 0x56920282 (0x050656920282)
000414: *Sep 17 10:46:11.075: As1/12 LCP:    PFC (0x0702)
000415: *Sep 17 10:46:11.075: As1/12 LCP:    ACFC (0x0802)
000416: *Sep 17 10:46:11.075: As1/12 LCP:    Callback 6 (0x0D0306)
000417: *Sep 17 10:46:11.075: As1/12: Enabling PPP framing in UART Microcode on TTY1/12 succeeded
000418: *Sep 17 10:46:11.075: As1/12 LCP: Lower layer not up, Fast Starting
000419: *Sep 17 10:46:11.075: As1/12 PPP: Using modem call direction
000420: *Sep 17 10:46:11.075: As1/12 PPP: Treating connection as a callin
000421: *Sep 17 10:46:11.075: As1/12 PPP: Session handle[800001A] Session id[19]
000422: *Sep 17 10:46:11.075: As1/12 PPP: Phase is ESTABLISHING, Passive Open
000423: *Sep 17 10:46:11.075: As1/12 LCP: State is Listen
000424: *Sep 17 10:46:11.075: As1/12 LCP: O CONFREQ [Listen] id 13 len 24
000425: *Sep 17 10:46:11.075: As1/12 LCP:    ACCM 0x000A0000 (0x0206000A0000)
000426: *Sep 17 10:46:11.075: As1/12 LCP:    AuthProto PAP (0x0304C023)
000427: *Sep 17 10:46:11.075: As1/12 LCP:    MagicNumber 0x14A18BAE (0x050614A18BAE)
000428: *Sep 17 10:46:11.079: As1/12 LCP:    PFC (0x0702)
000429: *Sep 17 10:46:11.079: As1/12 LCP:    ACFC (0x0802)
000430: *Sep 17 10:46:11.079: As1/12 LCP: O CONFREJ [Listen] id 0 len 7
000431: *Sep 17 10:46:11.079: As1/12 LCP:    Callback 6 (0x0D0306)
000432: *Sep 17 10:46:11.079: Modem 1/12 ACF: CMD PPP mode active
000433: *Sep 17 10:46:11.079: Modem 1/12 ACF: CMD PPP escape maps set: TX map=00000000 RX map=FFFFFFFF
000434: *Sep 17 10:46:11.079: %LINK-3-UPDOWN: Interface Async1/12, changed state to up
000435: *Sep 17 10:46:11.559: As1/12 PPP: I pkt type 0xC021, datagramsize 28 link[ppp]
000436: *Sep 17 10:46:11.559: As1/12 PPP: I pkt type 0xC021, datagramsize 28 link[ppp]
000437: *Sep 17 10:46:11.559: As1/12 LCP: I CONFACK [REQsent] id 13 len 24
000438: *Sep 17 10:46:11.559: As1/12 LCP:    ACCM 0x000A0000 (0x0206000A0000)
000439: *Sep 17 10:46:11.559: As1/12 LCP:    AuthProto PAP (0x0304C023)
000440: *Sep 17 10:46:11.559: As1/12 LCP:    MagicNumber 0x14A18BAE (0x050614A18BAE)
000441: *Sep 17 10:46:11.559: As1/12 LCP:    PFC (0x0702)
000442: *Sep 17 10:46:11.559: As1/12 LCP:    ACFC (0x0802)
000443: *Sep 17 10:46:11.563: As1/12 PPP: I pkt type 0xC021, datagramsize 24 link[ppp]
000444: *Sep 17 10:46:11.563: As1/12 PPP: I pkt type 0xC021, datagramsize 24 link[ppp]
000445: *Sep 17 10:46:11.563: As1/12 LCP: I CONFREQ [ACKrcvd] id 1 len 20
000446: *Sep 17 10:46:11.563: As1/12 LCP:    ACCM 0x00000000 (0x020600000000)
000447: *Sep 17 10:46:11.563: As1/12 LCP:    MagicNumber 0x56920282 (0x050656920282)
000448: *Sep 17 10:46:11.563: As1/12 LCP:    PFC (0x0702)
000449: *Sep 17 10:46:11.563: As1/12 LCP:    ACFC (0x0802)
000450: *Sep 17 10:46:11.563: As1/12 LCP: O CONFACK [ACKrcvd] id 1 len 20
000451: *Sep 17 10:46:11.563: As1/12 LCP:    ACCM 0x00000000 (0x020600000000)
000452: *Sep 17 10:46:11.563: As1/12 LCP:    MagicNumber 0x56920282 (0x050656920282)
000453: *Sep 17 10:46:11.563: As1/12 LCP:    PFC (0x0702)
000454: *Sep 17 10:46:11.563: As1/12 LCP:    ACFC (0x0802)
000455: *Sep 17 10:46:11.567: As1/12 LCP: State is Open
000456: *Sep 17 10:46:11.567: As1/12 PPP: Phase is AUTHENTICATING, by this end
000457: *Sep 17 10:46:11.567: Modem 1/12 ACF: CMD PPP escape maps set: TX map=00000000 RX map=00000000
000458: *Sep 17 10:46:11.859: As1/12 PPP: I pkt type 0xC021, datagramsize 20 link[ppp]
000459: *Sep 17 10:46:11.859: As1/12 PPP: I pkt type 0xC021, datagramsize 20 link[ppp]
000460: *Sep 17 10:46:11.859: As1/12 LCP: I IDENTIFY [Open] id 2 len 18 magic 0x56920282 MSRASV5.20
000461: *Sep 17 10:46:11.863: As1/12 PPP: I pkt type 0xC021, datagramsize 25 link[ppp]
000462: *Sep 17 10:46:11.863: As1/12 PPP: I pkt type 0xC021, datagramsize 25 link[ppp]
000463: *Sep 17 10:46:11.863: As1/12 LCP: I IDENTIFY [Open] id 3 len 23 magic 0x56920282 MSRAS-0-ITADMIN
000464: *Sep 17 10:46:11.863: As1/12 PPP: I pkt type 0xC021, datagramsize 26 link[ppp]
000465: *Sep 17 10:46:11.863: As1/12 PPP: I pkt type 0xC021, datagramsize 26 link[ppp]
000466: *Sep 17 10:46:11.863: As1/12 LCP: I IDENTIFY [Open] id 4 len 24 magic 0x56920282 \}3nk[^F?SVT]=}E
000467: *Sep 17 10:46:11.867: As1/12 PPP: I pkt type 0xC023, datagramsize 16 link[ppp]
000468: *Sep 17 10:46:11.867: As1/12 PPP: I pkt type 0xC023, datagramsize 16 link[ppp]
000469: *Sep 17 10:46:11.867: As1/12 PAP: I AUTH-REQ id 2 len 14 from "test"
000470: *Sep 17 10:46:11.867: As1/12 PAP: Authenticating peer test
000471: *Sep 17 10:46:11.867: As1/12 PPP: Phase is FORWARDING, Attempting Forward
000472: *Sep 17 10:46:11.867: As1/12 PPP: Phase is AUTHENTICATING, Unauthenticated User
000473: *Sep 17 10:46:11.867: As1/12 PPP: Phase is FORWARDING, Attempting Forward
000474: *Sep 17 10:46:11.867: As1/12 PPP: Phase is AUTHENTICATING, Authenticated User
000475: *Sep 17 10:46:11.867: AAA/AUTHOR (0x17): Pick method list 'ppp'
000476: *Sep 17 10:46:11.867: AAA/AUTHOR (0x17): Pick method list 'ppp'
000477: *Sep 17 10:46:11.867: As1/12 PPP/AAA: Check Attr: Framed-Protocol
000478: *Sep 17 10:46:11.867: As1/12 PPP/AAA: Check Attr: username
000479: *Sep 17 10:46:11.867: As1/12 AAA/AUTHOR/FSM: We can start LCP
000480: *Sep 17 10:46:11.867: As1/12 PPP/AAA: Check Attr: Framed-Protocol
000481: *Sep 17 10:46:11.867: As1/12 PPP/AAA: Check Attr: username
000482: *Sep 17 10:46:11.867: As1/12 AAA/AUTHOR/FSM: We can start IPCP
000483: *Sep 17 10:46:11.867: As1/12 AAA/AUTHOR/LCP: Process Author
000484: *Sep 17 10:46:11.867: As1/12 PAP: O AUTH-ACK id 2 len 5
000485: *Sep 17 10:46:11.867: As1/12 PPP: Phase is UP
000486: *Sep 17 10:46:11.867: As1/12 AAA/AUTHOR/IPCP: Already authorized
000487: *Sep 17 10:46:11.867: As1/12 AAA/AUTHOR/FSM: We can start IPCP
000488: *Sep 17 10:46:11.867: As1/12 IPCP: O CONFREQ [Closed] id 1 len 16
000489: *Sep 17 10:46:11.867: As1/12 IPCP:    CompressType VJ 15 slots CompressSlotID (0x0206002D0F01)
000490: *Sep 17 10:46:11.867: As1/12 IPCP:    Address 192.168.100.1 (0x0306C0A86401)
000491: *Sep 17 10:46:11.867: As1/12 PPP: Process pending ncp packets
000492: *Sep 17 10:46:12.163: As1/12 PPP: I pkt type 0x8057, datagramsize 16 link[ipv6]
000493: *Sep 17 10:46:12.163: As1/12 PPP: I pkt type 0x8057, datagramsize 16 link[ipv6]
000494: *Sep 17 10:46:12.163: As1/12 IPV6CP: I CONFREQ [Not negotiated] id 5 len 14
000495: *Sep 17 10:46:12.163: As1/12 IPV6CP:    Interface-Id 6C47:6D95:1AE3:2F30 (0x010A6C476D951AE32F30)
000496: *Sep 17 10:46:12.163: As1/12 LCP: O PROTREJ [Open] id 14 len 20 protocol IPV6CP (0x80570105000E010A6C476D951AE32F30)
000497: *Sep 17 10:46:12.163: As1/12 PPP: I pkt type 0x80FD, datagramsize 12 link[ccp]
000498: *Sep 17 10:46:12.163: As1/12 PPP: I pkt type 0x80FD, datagramsize 12 link[ccp]
000499: *Sep 17 10:46:12.163: As1/12 CCP: I CONFREQ [Not negotiated] id 6 len 10
000500: *Sep 17 10:46:12.163: As1/12 CCP:    MS-PPC supported bits 0x00000001 (0x120600000001)
000501: *Sep 17 10:46:12.163: As1/12 LCP: O PROTREJ [Open] id 15 len 16 protocol CCP (0x80FD0106000A120600000001)
000502: *Sep 17 10:46:12.171: As1/12 PPP: I pkt type 0x8021, datagramsize 42 link[ip]
000503: *Sep 17 10:46:12.171: As1/12 PPP: I pkt type 0x8021, datagramsize 42 link[ip]
000504: *Sep 17 10:46:12.171: As1/12 IPCP: I CONFREQ [REQsent] id 7 len 40
000505: *Sep 17 10:46:12.171: As1/12 IPCP:    CompressType VJ 15 slots CompressSlotID (0x0206002D0F01)
000506: *Sep 17 10:46:12.171: As1/12 IPCP:    Address 0.0.0.0 (0x030600000000)
000507: *Sep 17 10:46:12.171: As1/12 IPCP:    PrimaryDNS 0.0.0.0 (0x810600000000)
000508: *Sep 17 10:46:12.171: As1/12 IPCP:    PrimaryWINS 0.0.0.0 (0x820600000000)
000509: *Sep 17 10:46:12.171: As1/12 IPCP:    SecondaryDNS 0.0.0.0 (0x830600000000)
000510: *Sep 17 10:46:12.171: As1/12 IPCP:    SecondaryWINS 0.0.0.0 (0x840600000000)
000511: *Sep 17 10:46:12.171: As1/12 AAA/AUTHOR/IPCP: Start. Her address 0.0.0.0, we want 0.0.0.0
000512: *Sep 17 10:46:12.171: As1/12 AAA/AUTHOR/IPCP: Authorization succeeded
000513: *Sep 17 10:46:12.171: As1/12 AAA/AUTHOR/IPCP: Done. Her address 0.0.0.0, we want 0.0.0.0
000514: *Sep 17 10:46:12.171: As1/12 AAA/AUTHOR/CONFIG: Pools refreshed for pool pool
000515: *Sep 17 10:46:12.171: AAA/AUTHOR (0x17): Invalid method list id=0x0
000516: *Sep 17 10:46:12.171: As1/12 IPCP: Cannot satisfy pool request
000517: *Sep 17 10:46:12.171: As1/12 IPCP: Neither side knows remote address
000518: *Sep 17 10:46:12.171: As1/12 AAA/AUTHOR/IPCP: no author-info for primary dns
000519: *Sep 17 10:46:12.171: As1/12 AAA/AUTHOR/IPCP: no author-info for primary wins
000520: *Sep 17 10:46:12.171: As1/12 AAA/AUTHOR/IPCP: no author-info for seconday dns
000521: *Sep 17 10:46:12.171: As1/12 AAA/AUTHOR/IPCP: no author-info for seconday wins
000522: *Sep 17 10:46:12.171: As1/12 IPCP: O CONFREJ [REQsent] id 7 len 22
000523: *Sep 17 10:46:12.171: As1/12 IPCP:    Address 0.0.0.0 (0x030600000000)
000524: *Sep 17 10:46:12.171: As1/12 IPCP:    PrimaryWINS 0.0.0.0 (0x820600000000)
000525: *Sep 17 10:46:12.171: As1/12 IPCP:    SecondaryWINS 0.0.0.0 (0x840600000000)
000526: *Sep 17 10:46:12.171: As1/12 PPP: I pkt type 0x8021, datagramsize 18 link[ip]
000527: *Sep 17 10:46:12.171: As1/12 PPP: I pkt type 0x8021, datagramsize 18 link[ip]
000528: *Sep 17 10:46:12.171: As1/12 IPCP: I CONFACK [REQsent] id 1 len 16
000529: *Sep 17 10:46:12.171: As1/12 IPCP:    CompressType VJ 15 slots CompressSlotID (0x0206002D0F01)
000530: *Sep 17 10:46:12.171: As1/12 IPCP:    Address 192.168.100.1 (0x0306C0A86401)
000531: *Sep 17 10:46:12.447: As1/12 PPP: I pkt type 0x8021, datagramsize 18 link[ip]
000532: *Sep 17 10:46:12.447: As1/12 PPP: I pkt type 0x8021, datagramsize 18 link[ip]
000533: *Sep 17 10:46:12.447: As1/12 IPCP: I CONFREQ [ACKrcvd] id 8 len 16
000534: *Sep 17 10:46:12.447: As1/12 IPCP:    CompressType VJ 15 slots CompressSlotID (0x0206002
%This command has no effect on this line; use modem AT commands insteadD0F01)
000535: *Sep 17 10:46:12.447: As1/12 IPCP:    Address 0.0.0.0 (0x030600000000)
000536: *Sep 17 10:46:12.447: As1/12 AAA/AUTHOR/IPCP: Start. Her address 0.0.0.0, we want 0.0.0.0
000537: *Sep 17 10:46:12.447: As1/12 AAA/AUTHOR/IPCP: Authorization succeeded
000538: *Sep 17 10:46:12.447: As1/12 AAA/AUTHOR/IPCP: Done. Her address 0.0.0.0, we want 0.0.0.0
000539: *Sep 17 10:46:12.447: As1/12 AAA/AUTHOR/CONFIG: Pool pool refresh skipped
000540: *Sep 17 10:46:12.447: As1/12 AAA/AUTHOR/CONFIG: Pools refreshed 0 seconds ago
000541: *Sep 17 10:46:12.447: As1/12 IPCP: Cannot satisfy pool request
000542: *Sep 17 10:46:12.447: As1/12 IPCP: Neither side knows remote address
000543: *Sep 17 10:46:12.447: As1/12 IPCP: O CONFREJ [ACKrcvd] id 8 len 10
000544: *Sep 17 10:46:12.447: As1/12 IPCP:    Address 0.0.0.0 (0x030600000000)
000545: *Sep 17 10:46:12.719: As1/12 PPP: I pkt type 0x8021, datagramsize 18 link[ip]
000546: *Sep 17 10:46:12.719: As1/12 PPP: I pkt type 0x8021, datagramsize 18 link[ip]
000547: *Sep 17 10:46:12.719: As1/12 IPCP: I TERMREQ [ACKrcvd] id 9 len 16 (0x56920282003CCD74000002E2)
000548: *Sep 17 10:46:12.719: As1/12 IPCP: O TERMACK [ACKrcvd] id 9 len 4
000549: *Sep 17 10:46:12.867: %LINEPROTO-5-UPDOWN: Line protocol on Interface Async1/12, changed state to up
000550: *Sep 17 10:46:13.871: As1/12 IPCP: TIMEout: State REQsent
000551: *Sep 17 10:46:13.871: As1/12 IPCP: O CONFREQ [REQsent] id 2 len 16
000552: *Sep 17 10:46:13.871: As1/12 IPCP:    CompressType VJ 15 slots CompressSlotID (0x0206002D0F01)
000553: *Sep 17 10:46:13.871: As1/12 IPCP:    Address 192.168.100.1 (0x0306C0A86401)
000554: *Sep 17 10:46:14.327: As1/12 PPP: I pkt type 0x8021, datagramsize 18 link[ip]
000555: *Sep 17 10:46:14.327: As1/12 PPP: I pkt type 0x8021, datagramsize 18 link[ip]
000556: *Sep 17 10:46:14.327: As1/12 IPCP: I TERMACK [REQsent] id 2 len 16 (0x0206002D0F010306C0A86401)
000557: *Sep 17 10:46:15.887: As1/12 IPCP: TIMEout: State REQsent
000558: *Sep 17 10:46:15.887: As1/12 IPCP: O CONFREQ [REQsent] id 3 len 16
000559: *Sep 17 10:46:15.887: As1/12 IPCP:    CompressType VJ 15 slots CompressSlotID (0x0206002D0F01)
000560: *Sep 17 10:46:15.887: As1/12 IPCP:    Address 192.168.100.1 (0x0306C0A86401)
000561: *Sep 17 10:46:16.139: As1/12 PPP: I pkt type 0x8021, datagramsize 18 link[ip]
000562: *Sep 17 10:46:16.139: As1/12 PPP: I pkt type 0x8021, datagramsize 18 link[ip]
000563: *Sep 17 10:46:16.139: As1/12 IPCP: I TERMACK [REQsent] id 3 len 16 (0x0206002D0F010306C0A86401)
000564: *Sep 17 10:46:17.747: As1/12 PPP: I pkt type 0xC021, datagramsize 20 link[ppp]
000565: *Sep 17 10:46:17.747: As1/12 PPP: I pkt type 0xC021, datagramsize 20 link[ppp]
000566: *Sep 17 10:46:17.747: As1/12 LCP: I TERMREQ [Open] id 10 len 16 (0x56920282003CCD7400000000)
000567: *Sep 17 10:46:17.747: As1/12 LCP: O TERMACK [Open] id 10 len 4
000568: *Sep 17 10:46:17.751: As1/12 PPP: Sending Acct Event[Down] id[17]
000569: *Sep 17 10:46:17.751: As1/12 IPCP: State is Closed
000570: *Sep 17 10:46:17.751: As1/12 PPP: Phase is TERMINATING
000571: *Sep 17 10:46:18.667: Modem 1/12 ACF: Event: Hook state: On Hook
000572: *Sep 17 10:46:18.667: Modem 1/12 ACF: State: Hangup
000573: *Sep 17 10:46:18.667: Modem 1/12 ACF: Event: DISCONNECT
000574: *Sep 17 10:46:18.667: Modem 1/12 ACF: State: Idle
000575: *Sep 17 10:46:18.695: TTY1/12: DSR was dropped
000576: *Sep 17 10:46:18.695: tty1/12: Modem: READY->HANGUP
000577: *Sep 17 10:46:18.695: TTY1/12: dropping DTR, hanging up
000578: *Sep 17 10:46:18.695: TTY1/12: Async Int reset: Dropping DTR
000579: *Sep 17 10:46:18.695: tty1/12: Modem: HANGUP->IDLE
000580: *Sep 17 10:46:18.695: Modem 1/12 ACF: CMD DTR set low
000581: *Sep 17 10:46:18.695: Modem 1/12 ACF: CMD DTR set low
000582: *Sep 17 10:46:18.751: %LINEPROTO-5-UPDOWN: Line protocol on Interface Async1/12, changed state to down
000583: *Sep 17 10:46:19.695: TTY1/12: cleanup pending. Delaying DTR
000584: *Sep 17 10:46:19.695: TTY1/12: cleanup pending. Delaying DTR
000585: *Sep 17 10:46:19.759: As1/12 LCP: TIMEout: State TERMsent
000586: *Sep 17 10:46:19.759: As1/12 LCP: State is Closed
000587: *Sep 17 10:46:19.759: As1/12 PPP: Phase is DOWN
000588: *Sep 17 10:46:20.695: %LINK-5-CHANGED: Interface Async1/12, changed state to reset
000589: *Sep 17 10:46:20.695: TTY1/12: cleanup pending. Delaying DTR
000590: *Sep 17 10:46:20.695: TTY1/12: cleanup pending. Delaying DTR
000591: *Sep 17 10:46:21.695: TTY1/12: cleanup pending. Delaying DTR
000592: *Sep 17 10:46:21.695: TTY1/12: cleanup pending. Delaying DTR
000593: *Sep 17 10:46:22.695: TTY1/12: cleanup pending. Delaying DTR
000594: *Sep 17 10:46:22.695: TTY1/12: cleanup pending. Delaying DTR
000595: *Sep 17 10:46:23.695: Async1/12: Async protocol mode stopped for 0.0.0.0
000596: *Sep 17 10:46:23.695: Async1/12: Reset PPP framing on TTY1/12
000597: *Sep 17 10:46:23.695: TTY1/12: no timer type 0 to destroy
000598: *Sep 17 10:46:23.695: TTY1/12: no timer type 1 to destroy
000599: *Sep 17 10:46:23.695: TTY1/12: no timer type 3 to destroy
000600: *Sep 17 10:46:23.695: TTY1/12: no timer type 4 to destroy
000601: *Sep 17 10:46:23.695: TTY1/12: destroy timer type 10
000602: *Sep 17 10:46:23.695: TTY1/12: no timer type 2 to destroy
000603: *Sep 17 10:46:23.695: Async1/12: allowing modem_process to continue hangup
000604: *Sep 17 10:46:23.695: TTY1/12: restoring DTR
000605: *Sep 17 10:46:23.695: Modem 1/12 ACF: CMD Character mode active
000606: *Sep 17 10:46:23.695: Modem 1/12 ACF: CMD DTR set high
000607: *Sep 17 10:46:23.695: Modem 1/12 ACF: State: Endcall
000608: *Sep 17 10:46:23.695: TTY1/12: autoconfigure probe started
000609: *Sep 17 10:46:23.831: Modem 1/12 ACF: Event: ENDCALL: Disconnect Received
000610: *Sep 17 10:46:23.831: Modem 1/12 ACF: State: Init
000611: *Sep 17 10:46:25.199: Modem 1/12 ACF: State: Idle
000612: *Sep 17 10:46:25.695: %LINK-3-UPDOWN: Interface Async1/12, changed state to down
RDCCI_2ND_HQ#
RDCCI_2ND_HQ#
000613: *Sep 17 10:48:25.695: TTY0: timer type 1 expired
000614: *Sep 17 10:48:25.695: TTY0: Exec timer (continued)
Please try to help me out in this problem

check the configuration whether it is correct or not ,is there any commands are missing
i cann't input the command in line mode
Router(config-line)#autoselect ppp
%Autoselect w/o the interface command 'Async mode interactive' is useless
Router(config-line)#
check the commands and output of the debug
aaa new-model
aaa authentication login telnet local
aaa authentication login ppp local
aaa authentication ppp ppp local
aaa authorization network ppp local
aaa session-id common
interface Group-Async1
description "ASYN-GROUP"
ip unnumbered GigabitEthernet0/1
encapsulation ppp
ip tcp header-compression
async dynamic routing
async mode interactive
peer default ip address pool pool
ppp authentication pap chap ppp
ppp authorization ppp
group-range 1/0 1/15
line aux 0
stopbits 1
line 1/0 1/15
login authentication local
modem Dialin
modem autoconfigure discovery
autoselect during-login
autoselect ppp
flowcontrol hardware

Similar Messages

Unable to achieve dial-up connection with G4 Powerbook

I have a G4 PowerBook that I use with a Netgear wi-fi router for Broadband and my server, Virgin. I want to use the PowerBook with just a dial-up connection to another server, BT. I turn off Airport. I have spent a long while with the BT helpline. I do all the settings they suggest. Then I finally press, Connect. I read: "connecting to server". Then it obviously fails and says Disconnecting. Disconnnecting continues ad infinitum and can only be terminated by doing a Restart. What am I doing wrong, please?

Hello Shoboy,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand you have recently purchased a refurbished HP Compaq dc7800 Business PC with a 56k dial-up modem installed and the dial-up modem is not working. I am sorry, but to get your issue more exposure, I would suggest posting it in the commercial forums, since this is a commercial product. You can do this at Business PCs - Compaq, Elite, Pro.
I hope this helps. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Dial-up connect problem after 10.4.9 update

After installing the 10.4.9 update it has been very difficult to connect to the dial-up internet server. It may take 19 tries clicking "Connect" before it connects and sometimes it connects after four tries. The error messages vary: unable to connect to PPP or no carrier detected are the most frequent messages. Once on-line everything works fine except for being able to send mail. I'm unable to send mail - that error message wants the SMTP server settings and any advanced settings checked.
I called Apple support and the Apple Tech had me reconfigure the Network to dial an "800" number to a PPP Dial-Up Test Site. When that worked succussfully a window displayed a message that the modem, the PPP or Remote Access software, the TCP/IP software is functioning and correctly configured for a PPP connection to this server. The Apple Tech checked the information on the 10.4.9 upgrade and did not find any reason to think it would cause this problem. Apple Tech suggested I contact the dial-up server.
The dial-up server went over all the configurations and they were all correct. During my phone call to them they could hear the computer dial-up sounds and said it sounded like the normal "hand-shake". The dial-up server has had no reports of problems with connecting to their service other than mine.
If anyone knows what could have caused this problem, how to fix it or has the same problem I'd be very interested in hearing from them.
Thanks, AppleProblem
iMac G5 Mac OS X (10.4.9) Power PC
iMac G5 Mac OS X (10.4.9) Power PC
iMac G5 Mac OS X (10.4.9) Power PC

You have been most helpful and we think the problem is solved. After I send this message explaining what has transpired I'll go back and click on the "Solved" button.
Based upon your suggestion to try "Script, like v32" I started experimenting with the four internal modem options we have in our Modem settings. They are v.32, v.34, v.90 and v.92. I tried to connect three different times with each one. The v.32 didn't connect, the v.34 connected all three times, the v.90 connected the first two but not the third or the fourth try. On the fifth attempt the Mac froze up, the mouse/arrow wouldn't work and there was a high speed motor sound. I tried a Force Quit (Option,Command,Escape), I tried a Hard Shut Down (holding the power key) and when these didn't work I pulled the plug. Then, I booted back up and connected on the second try using the v.90. I don't know why the computer froze up and assume it is nothing to be concerned about.
I then called our ISP and found that the two access numbers are both v.90. I suspect that until we did the version upgrade to the 10.4.9 that our computer was accommodating the v.90 eventhough it was a v.92 (!?!). Just a guess.
I also asked the ISP tech why we couldn't send mail. He asked if we had the password set for the outgoing mail. He said if we're using the access number owned by them it didn't require a password but the other access number is not owned by them and is used by other ISPs and it does require a password. We had never set up our Mail Preferences outgoing mail settings to use a password. Before our connect problems we had always used the number owned by them and after the connect problems we started using the other number because we found that we could connect to it with fewer attempts. We put in the necessary information and now have no problem sending mail.
We have also been looking for another ISP and the web site you gave us www.fastermac.net looks very promising. They have one access number in our area and we want to check if it is v.92 or v.90. During our research for an ISP we learned that if it is a v.92 access number (and we use our v.92 modem) we'll be able to answer phone calls and remain online. That will be a real blessing. Thanks!
We really appreciated your brain storming with us and your perseverance. Thanks so much!
iMac G5 Mac OS X (10.4.9) Power PC

Dialer not connecting to campaign manager

Hello,
I have the dialer not connecting to campaign manager and showing the following:
10:00:50 Trace: Attempting EMT connection to computer [172.16.200.82/172.16.200.82], port [40032]
10:00:51 Trace:         Unable to establish an EMT connection:
10:00:51 Trace:         error value [10060], text: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because con
nected host has failed to respond.
Also the dialer PIM is showing the following:
10:01:37 Trace: Transport: appServerHostName1 = 172.16.200.83
10:01:37 Trace: Transport: appTcpServiceName1 = 38001
10:01:37 Trace: Transport: appServerHostName2 = 172.16.200.83
10:01:37 Trace: Transport: appTcpServiceName2 = 38001
10:01:37 Peripheral 5004 sending OPC PIM_OK_ACK acknowledgment for command PIM_CONFIGURE_REQ (TransID=0).
10:01:37 Attempting to connect to MR application at IP address 172.16.200.83 port 38001.
10:01:38 Attempting to connect to MR application at IP address 172.16.200.83 port 38001.
10:01:49 Attempting to connect to MR application at IP address 172.16.200.83 port 38001.
10:01:50 Attempting to connect to MR application at IP address 172.16.200.83 port 38001.
10:02:02 Attempting to connect to MR application at IP address 172.16.200.83 port 38001.
10:02:03 Attempting to connect to MR application at IP address 172.16.200.83 port 38001.
10:02:08 ProcessPIMSetIdleReq: Peripheral 5004 going idle.
10:02:14 Peripheral 5004 sending OPC PIM_OK_ACK acknowledgment for command PIM_SET_IDLE_REQ (TransID=-1).
I have checked network connectivity, ping by IP address, ping by hostname, dialer config pointing to address of LoggerA.
What should I check next?
Note that I have outbound dialer working fine on ProggerA and I am currently duplexing PG and pim process on ProggerB. PIM1 is ACTIVE but PIM2 is IDLE (logs above are for PIM2)
Thanks,
Justine.

Hi,
Are you planning to have Duplex dialers ?
(Assuming it is SIP)If that's the case, you may have to look at the Best Practices for SIP dialer in SRND.
"Use a media routing PG with one media routing PIM for duplex SIP Dialers. One SIP Dialer is active while another SIP Dialer is in warm standby mode. One MR PIM is for each SIP Dialer. In a duplex MR PG environment, each PG side has only one PIM that connects to the local dialer                     when the Dialer becomes active"
Regards,
Senthil

How do I erase an old dial up connection?

I am trying to delete an old dial up connection that keeps populating. I am unable to use my new internet service provider due to the pop up question populating asking me if that is how I am getting on the internet. I called my provider and they told me I needed to delete that dial up connection but they were unfamilar as to how to do it due to me being with mozilla firefox and not internet explorer.

OMG! Thank you so much ... The tech Support group was making this seem like a huge problem and you just solved it in a second.. Thanks
I see that it didnt matter if I had Mozilla firefox or not. Thanks once again!

Error while applying a patch "Unable to get the database connection"

Dear Experts,
A patch which got successfully applied is failing Production and the error is kind of surprising to me.
Apps version is 11.5.10.2
db version is 10.2.0.4
The worker log file shows
Time when worker restarted job: Thu Nov 24 2011 22:14:52
Start time for file is: Thu Nov 24 2011 22:14:52
adjava -ms128m -mx256m -nojit oracle.apps.fnd.odf2.FndXdfCmp &un_apps &pw_apps &un_apps &pw_apps &jdbc_protocol &jdbc_db_addr table &fullpath_pa_patch/115
Reading product information from file...
Reading language and territory information from file...
Reading language information from applUS.txt ...
Temporarily resetting CLASSPATH to:
"/erp/oracle/prodappl/ad/11.5.0/java/adjri.zip:/usr/java14/jre/lib/charsets.jar:/usr/java14/jre/lib/core.jar:/usr/java14/jre/lib/graphics.jar:/usr/java1
Calling /usr/java14/bin/java ...
Exception occured
              Copyright (c) 2003 Oracle Corporation
                 Redwood Shores, California, USA
         XDF(XML Object Description File) Comparison Utility
                        Version 1
NOTE: You may not use this utility for custom development
      unless you have written permission from Oracle Corporation.
Unable to get the database connection using schema username/passwordIo exception: The Network Adapter could not establish the connection
AD Run Java Command is complete.
                     Copyright (c) 2002 Oracle Corporation
                        Redwood Shores, California, USA
                                    AD Java
                                 Version 11.5.0
NOTE: You may not use this utility for custom development
      unless you have written permission from Oracle Corporation.
AD Worker error:
The above program failed. See the error messages listed
above, if any, or see the log and output files for the program.
Time when worker failed: Thu Nov 24 2011 22:14:53
{code}
The error says database connection error. I am able to connect to the database using sqlplus. I tried to restart the failed worker, but the same error is repeating.
Any help would be appreciated.
Thanks
qARS
Edited by: user7640966 on Nov 24, 2011 9:07 AM

Hussein,
One thing which I noticed now is in the apps Tier the
tnsnames.ora under $TNS_ADMIN
shows entry like this:
PROD=
        (DESCRIPTION=
                (ADDRESS=(PROTOCOL=tcp)(HOST=<appsServerName>)(PORT=1521))
                (ADDRESS=(PROTOCOL=tcp)(HOST=<dbServer>)(PORT=1521))
            (CONNECT_DATA=
                (SID=PROD)
        )Actually *(ADDRESS=(PROTOCOL=tcp)(HOST=<appsIPaddress>)(PORT=1521))* this line in the tnsnames.ora is not correct. In fact the appsServerName should be replaced with dbServerName
I deleted the tnsnames.ora and reran autoconfig but it is again recreating the same entry.
Any clue how this can be fixed?
Thanks
qARS

I lost the dial up connection dialog box. I unchecked a check item in the dial connetion box. How do I get the dial up connection back?

I established a dial up connection by updating to automatic the remote managers and telephony in administrative tool services area on my XP system according to firefox help instructions.
At first I had a dial up connection but I unchecked an item in the
dial up connection box. I am not sure what I unchecked or toggled
off. I then lost the dial up connection. I need to get the dial connection dialog box back. What needs to be done
Thank you.

I see no direct connection.. a printer and the computer setup for internet are not related.
But it sounds like the router in the wife's office is now in the wrong mode..
If you have an existing main router replace the second router for a switch .. that is the easy way.
Otherwise you need to bridge the router if it has that option.. most do not. Or use wan bypass.. where you turn off the dhcp server in the router and fix its ip to match the range of the main router.. this is the hassle of using router as a switch.
BUT I am making a huge number of assumptions.
What I need is the full network layout.. a quick picture would help.
I need main modem.. main router.. (maybe same box or different).. make model and current IP address and how dhcp is setup.
I need secondary router.. if that is what it is, IP and settings.
I want the printer type and model. How it is connected.
BTW I much prefer to see a network printer plugged into the network rather than usb.. it is only a matter of sorting the IP settings and driver pointing to the network rather than local.
Or you should think of it as a broken washing machine and call the technician.. who could fix the whole lot in an hour.

TcpListener not working on Azure: Unable to read data from the transport connection: An existing connection was forcibly closed by the remote host

Hi Everybody,
i'm playing a little bit with Windows Azure and I'm blocked with a really simple issue (or maybe not).
I've created a Cloud Service containing one simple Worker Role. I've configured an EndPoint in the WorkerRole configuration, which allows Input connections via tcp on port 10100.
Here the ServiceDefinition.csdef file content:
<?xml version="1.0" encoding="utf-8"?>
<ServiceDefinition name="EmacCloudService" xmlns="http://schemas.microsoft.com/ServiceHosting/2008/10/ServiceDefinition" schemaVersion="2014-01.2.3">
<WorkerRole name="TcpListenerWorkerRole" vmsize="Small">
<Imports>
<Import moduleName="Diagnostics" />
<Import moduleName="RemoteAccess" />
<Import moduleName="RemoteForwarder" />
</Imports>
<Endpoints>
<InputEndpoint name="Endpoint1" protocol="tcp" port="10100" />
</Endpoints>
</WorkerRole>
</ServiceDefinition>
This WorkerRole is just creating a TcpListener object listening to the configured port (using the RoleEnvironment instance) and waits for an incoming connection. It receives a message and returns a hardcoded message (see code snippet below).
namespace TcpListenerWorkerRole
using System;
using System.Net;
using Microsoft.WindowsAzure.ServiceRuntime;
using System.Net.Sockets;
using System.Text;
using Roche.Emac.Infrastructure;
using System.IO;
using System.Threading.Tasks;
using Microsoft.WindowsAzure.Diagnostics;
using System.Linq;
public class WorkerRole : RoleEntryPoint
public override void Run()
// This is a sample worker implementation. Replace with your logic.
LoggingProvider.Logger.Info("TcpListenerWorkerRole entry point called");
TcpListener listener = null;
try
listener = new TcpListener(RoleEnvironment.CurrentRoleInstance.InstanceEndpoints["Endpoint1"].IPEndpoint);
listener.ExclusiveAddressUse = false;
listener.Start();
LoggingProvider.Logger.Info(string.Format("TcpListener started at '{0}:{1}'", RoleEnvironment.CurrentRoleInstance.InstanceEndpoints["Endpoint1"].IPEndpoint.Address, RoleEnvironment.CurrentRoleInstance.InstanceEndpoints["Endpoint1"].IPEndpoint.Port));
catch (SocketException ex)
LoggingProvider.Logger.Exception("Unexpected exception while creating the TcpListener", ex);
return;
while (true)
Task.Run(async () =>
TcpClient client = await listener.AcceptTcpClientAsync();
LoggingProvider.Logger.Info(string.Format("Client connected. Address='{0}'", client.Client.RemoteEndPoint.ToString()));
NetworkStream networkStream = client.GetStream();
StreamReader reader = new StreamReader(networkStream);
StreamWriter writer = new StreamWriter(networkStream);
writer.AutoFlush = true;
string input = string.Empty;
while (true)
try
char[] receivedChars = new char[client.ReceiveBufferSize];
LoggingProvider.Logger.Info("Buffer size: " + client.ReceiveBufferSize);
int readedChars = reader.Read(receivedChars, 0, client.ReceiveBufferSize);
char[] validChars = new char[readedChars];
Array.ConstrainedCopy(receivedChars, 0, validChars, 0, readedChars);
input = new string(validChars);
LoggingProvider.Logger.Info("This is what the host sent to you: " + input+". Readed chars=" + readedChars);
try
string orderResultFormat = Encoding.ASCII.GetString(Encoding.ASCII.GetBytes("\xB")) + @"MSH|^~\&|Instrument|Laboratory|LIS|LIS Facility|20120427123212+0100||ORL^O34^ORL_O34| 11|P|2.5.1||||||UNICODE UTF-8|||LAB-28^IHE" + Environment.NewLine + "MSA|AA|10" + Environment.NewLine + @"PID|||patientId||""""||19700101|M" + Environment.NewLine + "SPM|1|sampleId&ROCHE||ORH^^HL70487|||||||P^^HL70369" + Environment.NewLine + "SAC|||sampleId" + Environment.NewLine + "ORC|OK|orderId|||SC||||20120427123212" + Encoding.ASCII.GetString(Encoding.ASCII.GetBytes("\x1c\x0d"));
writer.Write(orderResultFormat);
catch (Exception e)
LoggingProvider.Logger.Exception("Unexpected exception while writting the response", e);
client.Close();
break;
catch (Exception ex)
LoggingProvider.Logger.Exception("Unexpected exception while Reading the request", ex);
client.Close();
break;
}).Wait();
public override bool OnStart()
// Set the maximum number of concurrent connections
ServicePointManager.DefaultConnectionLimit = 12;
DiagnosticMonitor.Start("Microsoft.WindowsAzure.Plugins.Diagnostics.ConnectionString");
RoleEnvironment.Changing += RoleEnvironment_Changing;
return base.OnStart();
private void RoleEnvironment_Changing(object sender, RoleEnvironmentChangingEventArgs e)
// If a configuration setting is changing
LoggingProvider.Logger.Info("RoleEnvironment is changing....");
if (e.Changes.Any(change => change is RoleEnvironmentConfigurationSettingChange))
// Set e.Cancel to true to restart this role instance
e.Cancel = true;
As you can see, nothing special is being done. I've used the RoleEnvironment.CurrentRoleInstance.InstanceEndpoints to retrieve the current IPEndpoint.
Running the Cloud Service in the Windows Azure Compute Emulator everything works fine, but when I deploy it in Azure, then I receive the following Exception:
2014-08-06 14:55:23,816 [Role Start Thread] INFO EMAC Log - TcpListenerWorkerRole entry point called
2014-08-06 14:55:24,145 [Role Start Thread] INFO EMAC Log - TcpListener started at '100.74.10.55:10100'
2014-08-06 15:06:19,375 [9] INFO EMAC Log - Client connected. Address='196.3.50.254:51934'
2014-08-06 15:06:19,375 [9] INFO EMAC Log - Buffer size: 65536
2014-08-06 15:06:45,491 [9] FATAL EMAC Log - Unexpected exception while Reading the request
System.IO.IOException: Unable to read data from the transport connection: An existing connection was forcibly closed by the remote host. ---> System.Net.Sockets.SocketException: An existing connection was forcibly closed by the remote host
at System.Net.Sockets.NetworkStream.Read(Byte[] buffer, Int32 offset, Int32 size)
--- End of inner exception stack trace ---
at System.Net.Sockets.NetworkStream.Read(Byte[] buffer, Int32 offset, Int32 size)
at System.IO.StreamReader.ReadBuffer(Char[] userBuffer, Int32 userOffset, Int32 desiredChars, Boolean& readToUserBuffer)
at System.IO.StreamReader.Read(Char[] buffer, Int32 index, Int32 count)
at TcpListenerWorkerRole.WorkerRole.<>c__DisplayClass0.<<Run>b__2>d__0.MoveNext() in C:\Work\Own projects\EMAC\AzureCloudEmac\TcpListenerWorkerRole\WorkerRole.cs:line 60
I've already tried to configure an internal port in the ServiceDefinition.csdef file, but I get the same exception there.
As you can see, the client can connect to the service (the log shows the message: Client connected with the address) but when it tries to read the bytes from the stream, it throws the exception.
For me it seems like Azure is preventing the retrieval of the message. I've tried to disable the Firewall in the VM in Azure and the same continues happening.
I'm using Windows Azure SDK 2.3
Any help will be very very welcome!
Thanks in advance!
Javier
En caso de que la respuesta te sirva, porfavor, márcala como válida
Muchas gracias y suerte!
Javier Jiménez Roda
Blog: http://jimenezroda.wordpress.com

hi Javier,
I changed your code like this:
private AutoResetEvent connectionWaitHandle = new AutoResetEvent(false);
public override void Run()
TcpListener listener = null;
try
listener = new TcpListener(
RoleEnvironment.CurrentRoleInstance.InstanceEndpoints["Endpoint"].IPEndpoint);
listener.ExclusiveAddressUse = false;
listener.Start();
catch (SocketException se)
return;
while (true)
IAsyncResult result = listener.BeginAcceptTcpClient(HandleAsyncConnection, listener);
connectionWaitHandle.WaitOne();
The HandleAsync method is your "While (true)" code:
private void HandleAsyncConnection(IAsyncResult result)
TcpListener listener = (TcpListener)result.AsyncState;
TcpClient client = listener.EndAcceptTcpClient(result);
connectionWaitHandle.Set();
NetworkStream netStream = client.GetStream();
StreamReader reader = new StreamReader(netStream);
StreamWriter writer = new StreamWriter(netStream);
writer.AutoFlush = true;
string input = string.Empty;
try
char[] receivedChars = new char[client.ReceiveBufferSize];
// LoggingProvider.Logger.Info("Buffer size: " + client.ReceiveBufferSize);
int readedChars = reader.Read(receivedChars, 0, client.ReceiveBufferSize);
char[] validChars = new char[readedChars];
Array.ConstrainedCopy(receivedChars, 0, validChars, 0, readedChars);
input = new string(validChars);
// LoggingProvider.Logger.Info("This is what the host sent to you: " + input + ". Readed chars=" + readedChars);
try
string orderResultFormat = Encoding.ASCII.GetString(Encoding.ASCII.GetBytes("\xB")) + @"MSH|^~\&|Instrument|Laboratory|LIS|LIS Facility|20120427123212+0100||ORL^O34^ORL_O34| 11|P|2.5.1||||||UNICODE UTF-8|||LAB-28^IHE" + Environment.NewLine + "MSA|AA|10" + Environment.NewLine + @"PID|||patientId||""""||19700101|M" + Environment.NewLine + "SPM|1|sampleId&ROCHE||ORH^^HL70487|||||||P^^HL70369" + Environment.NewLine + "SAC|||sampleId" + Environment.NewLine + "ORC|OK|orderId|||SC||||20120427123212" + Encoding.ASCII.GetString(Encoding.ASCII.GetBytes("\x1c\x0d"));
writer.Write(orderResultFormat);
catch (Exception e)
// LoggingProvider.Logger.Exception("Unexpected exception while writting the response", e);
client.Close();
catch (Exception ex)
//LoggingProvider.Logger.Exception("Unexpected exception while Reading the request", ex);
client.Close();
Please try it. For this error message, I suggest you could refer to this thread (http://stackoverflow.com/questions/6173763/using-windows-azure-to-use-as-a-tcp-server
) and this post (http://stackoverflow.com/a/5420788).
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

I am having a major problem connecting to FaceTime. Message reads "unable to connect, check network connections". Yet I am online with Manila, Safari etc. any suggestions.

I am having a major problem connecting to FaceTime today. Message reads "unable to connect, check network connections". I am online, mail works, ex
Tc. This was not a a problem two days ago. Any suggestions?

Could be that the servers are overloaded today.

Unable to start the Universal Connection Pool error

Hi,
I am trying to deploy two instances of one and the same web application on Tomcat 6. I have application test.war, I have copied and renamed it to test2.war and moved both wars in Tomcat' webapps folder. One of those (which Tomcat decides to start first) correctly gets connection from PoolDataSourceFactory.getPoolDataSource() and works fine, but the second throws this exception while trying to get database connection.
Please help,
Thanks
java.sql.SQLException: Unable to start the Universal Connection Pool: java.sql.SQLException: Unable to start the Universal Connection Pool: oracle.ucp.UniversalConnectionPoolException: MBean exception occurred while registering or unregistering the MBean
at oracle.ucp.util.UCPErrorHandler.newSQLException(UCPErrorHandler.java:541)
at oracle.ucp.jdbc.PoolDataSourceImpl.throwSQLException(PoolDataSourceImpl.java:587)
at oracle.ucp.jdbc.PoolDataSourceImpl.startPool(PoolDataSourceImpl.java:276)
at oracle.ucp.jdbc.PoolDataSourceImpl.getConnection(PoolDataSourceImpl.java:646)
at oracle.ucp.jdbc.PoolDataSourceImpl.getConnection(PoolDataSourceImpl.java:613)
at oracle.ucp.jdbc.PoolDataSourceImpl.getConnection(PoolDataSourceImpl.java:607)
at com.avalonsql.core.db.connection.ConnectionWrapper.<init>(ConnectionWrapper.java:26)
... 31 more
Caused by: java.sql.SQLException: Unable to start the Universal Connection Pool: oracle.ucp.UniversalConnectionPoolException: MBean exception occurred while registering or unregistering the MBean
at oracle.ucp.util.UCPErrorHandler.newSQLException(UCPErrorHandler.java:541)
at oracle.ucp.jdbc.PoolDataSourceImpl.throwSQLException(PoolDataSourceImpl.java:587)
at oracle.ucp.jdbc.PoolDataSourceImpl.startPool(PoolDataSourceImpl.java:247)
... 35 more
Caused by: oracle.ucp.UniversalConnectionPoolException: MBean exception occurred while registering or unregistering the MBean
at oracle.ucp.util.UCPErrorHandler.newUniversalConnectionPoolException(UCPErrorHandler.java:421)
at oracle.ucp.util.UCPErrorHandler.newUniversalConnectionPoolException(UCPErrorHandler.java:389)
at oracle.ucp.admin.UniversalConnectionPoolManagerMBeanImpl.getUniversalConnectionPoolManagerMBean(UniversalConnectionPoolManagerMBeanImpl.java:149)
at oracle.ucp.jdbc.PoolDataSourceImpl.startPool(PoolDataSourceImpl.java:242)
... 35 more
Caused by: java.security.PrivilegedActionException: javax.management.InstanceAlreadyExistsException: oracle.ucp.admin:name=UniversalConnectionPoolManagerMBean
at java.security.AccessController.doPrivileged(Native Method)
at oracle.ucp.admin.UniversalConnectionPoolManagerMBeanImpl.getUniversalConnectionPoolManagerMBean(UniversalConnectionPoolManagerMBeanImpl.java:136)
... 36 more
Caused by: javax.management.InstanceAlreadyExistsException: oracle.ucp.admin:name=UniversalConnectionPoolManagerMBean
at com.sun.jmx.mbeanserver.Repository.addMBean(Repository.java:453)
at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.internal_addObject(DefaultMBeanServerInterceptor.java:1484)
at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.registerDynamicMBean(DefaultMBeanServerInterceptor.java:963)
at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.registerObject(DefaultMBeanServerInterceptor.java:917)
at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.registerMBean(DefaultMBeanServerInterceptor.java:312)
at com.sun.jmx.mbeanserver.JmxMBeanServer.registerMBean(JmxMBeanServer.java:482)
at oracle.ucp.admin.UniversalConnectionPoolManagerMBeanImpl$2.run(UniversalConnectionPoolManagerMBeanImpl.java:142)
... 38 more

I was getting the following exception.. However after setting the property ConnectionFactoryClassName, it went off..
Caused by: java.sql.SQLException: Invalid Universal Connection Pool configuration: java.sql.SQLException: Unable to create factory class instance with provided factory class name: java.lang.ClassNotFoundException:
     at oracle.ucp.util.UCPErrorHandler.newSQLException(UCPErrorHandler.java:541)
     at oracle.ucp.jdbc.PoolDataSourceImpl.throwSQLException(PoolDataSourceImpl.java:587)
     at oracle.ucp.jdbc.PoolDataSourceImpl.createUniversalConnectionPool(PoolDataSourceImpl.java:523)
     at oracle.ucp.admin.UniversalConnectionPoolManagerBase.createConnectionPool(UniversalConnectionPoolManagerBase.java:554)
     ... 92 more
Caused by: java.sql.SQLException: Unable to create factory class instance with provided factory class name: java.lang.ClassNotFoundException:
     at oracle.ucp.util.UCPErrorHandler.newSQLException(UCPErrorHandler.java:541)
     at oracle.ucp.jdbc.PoolDataSourceImpl.throwSQLException(PoolDataSourceImpl.java:587)
     at oracle.ucp.jdbc.PoolDataSourceImpl.initConnectionFactory(PoolDataSourceImpl.java:2457)
     at oracle.ucp.jdbc.PoolDataSourceImpl.createUniversalConnectionPool(PoolDataSourceImpl.java:386)
     ... 93 more
Caused by: java.lang.ClassNotFoundException:
     at java.lang.Class.forNameImpl(Native Method)
     at java.lang.Class.forName(Class.java:169)
     at oracle.ucp.jdbc.PoolDataSourceImpl.initConnectionFactory(PoolDataSourceImpl.java:2444)
     ... 94 more
Edited by: user7953709 on Aug 26, 2011 1:08 AM

Unable to get Results using Connection Pool

Hi All,
I have been trying to create JDBC connection pooling provided by the Apache Tomcat 4.0 with MySQL 4.0.16-nt at http://jakarta.apache.org/tomcat/tomcat-4.1-doc/jndi-datasource-examples-howto.html and my configuration is as follows
server.xml
<Context path="/DBTest" docBase="DBTest"
debug="5" reloadable="true" crossContext="true">
<Logger className="org.apache.catalina.logger.FileLogger"
prefix="localhost_DBTest_log." suffix=".txt"
timestamp="true"/>
<Resource name="jdbc/TestDB"
auth="Container"
type="javax.sql.DataSource"/>
<ResourceParams name="jdbc/TestDB">
<parameter>
<name>factory</name>
<value>org.apache.commons.dbcp.BasicDataSourceFactory</value>
</parameter>

<parameter>
<name>maxActive</name>
<value>100</value>
</parameter>

<parameter>
<name>maxIdle</name>
<value>30</value>
</parameter>

<parameter>
<name>maxWait</name>
<value>10000</value>
</parameter>

<parameter>
<name>username</name>
<value>javauser</value>
</parameter>
<parameter>
<name>password</name>
<value>javadude</value>
</parameter>

<parameter>
<name>driverClassName</name>
<value>org.gjt.mm.mysql.Driver</value>
</parameter>

<parameter>
<name>url</name>
<value>jdbc:mysql://localhost:3306/javatest?autoReconnect=true</value>
</parameter>
</ResourceParams>
</Context>
web.xml
<?xml version="1.0" encoding="ISO-8859-1"?>
<!DOCTYPE web-app PUBLIC
"-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN"
"http://java.sun.com/dtd/web-app_2_3.dtd">
<web-app>
<description>MySQL Test App</description>
<resource-ref>
<description>DB Connection</description>
<res-ref-name>jdbc/TestDB</res-ref-name>
<res-type>javax.sql.DataSource</res-type>
<res-auth>Container</res-auth>
</resource-ref>
</web-app>
test.jsp
<jsp:useBean id="foo" class="foo.DBTest" scope="page" />
<html>
<head>
<title>DB Test</title>
</head>
<body>
<%
foo.DBTest tst = new foo.DBTest();
tst.init();
%>
<h2>Results</h2>
Foo <%= tst.getFoo() %>
Bar <%= tst.getBar() %>
</body>
</html>
DBTest.java package
package foo;
import javax.naming.*;
import javax.sql.*;
import java.sql.*;
public class DBTest {
String foo = "Not Connected";
int bar = -1;
public void init() {
try{
Context ctx = new InitialContext();
if(ctx == null )
throw new Exception("Boom - No Context");
DataSource ds =
(DataSource)ctx.lookup(
"java:comp/env/jdbc/TestDB");
if (ds != null) {
Connection conn = ds.getConnection();
if(conn != null) {
foo = "Got Connection "+conn.toString();
Statement stmt = conn.createStatement();
ResultSet rst =
stmt.executeQuery(
"select id, foo, bar from testdata");
if(rst.next()) {
foo=rst.getString(2);
bar=rst.getInt(3);
conn.close();
}catch(Exception e) {
e.printStackTrace();
public String getFoo() { return foo; }
public int getBar() { return bar;}
Now when I am trying to run this on browser, everything goes fine except it doesn't show the expected results, instead of that it shows following in the browser:-
Results
Foo Not Connected
Bar -1
Can anybody help me out as to why I am getting such result while everything is right from my side. Is the program unable to connect to the database or it is not supporting the JDBC version that I am using.
Thanks in advance
Regards
Vikas

I've seen cases where NOT using the ResourceParams section, and instead using attributes in the Resource section will fix this. Don't know why.
i.e.
Instead of using:
<parameter>
<name>driverClassName</name>
<value>org.gjt.mm.mysql.Driver</value>
</parameter>use the driver attribute of the Resource tag:
<Resource name="jdbc/TestDB"
auth="Container"
type="javax.sql.DataSource"
driver="org.gjt.mm.mysql.Driver"/>Also note...I don't use the org.gjt.mm.mysql.Driver class (which is in the distribution), I use com.mysql.jdbc.Driver. Any reason you don't? This could be part of it. I don't really know.

IPhone 3G plugged into PC(Windows 7) 'USB is Not Recognized' and unable to restore; stuck on 'Connect to iTunes'

iPhone 3G plugged into PC(Windows 7) 'USB is Not Recognized' and unable to restore; stuck on 'Connect to iTunes'
I was in the process of putting another firmware for my iPhone(an .ipsw via. itunes) and the house had a power cut. The computer was in the middle of restoring the iPhone but never finished. The apple logo came on and then came onto the 'connect to itunes' screen. My sim card was in but there is no option to slide for emergency. When I Plug it into my computer, a message pops up saying that the 'USB Device Not Recognized', I've tried to plugging my iPhone into my laptop and other Computers but the same message occurs (all windows 7). Other articles say that the error is with the iPhone, I need help!! Can anybody offer some advice on what to do?
oh yeah, bit tight so not willing to spend any money;-)

Apple support:
Network Printer Troubleshooting
Reset Printing System

I can no longer access facebook from my macair and when i try the following error message appears "unable to establish a secure connection to the server.

I have had no issue accessing Facebook in the past using my MacAir. Last night each time I would try and access the page, an error message would appear, saying that unable to establish a secure connection to the server "www.facebook.com"". The problem continues this morning. I have not updated any software or made any changes. One minute it was working, the next it was not. I do not have any parental controls; I have deleted the cookies; and I have reset safari. I can access all other websites that I have tried. I am using Version 6.0.4.

From your Safari menu bar click Safari > Preferences then select the Privacy tab.
Click: Remove All Website Data
Then delete the cache.
Now open a Finder window. From the Finder menu bar click Go > Go to Folder
Type or copy paste the following
~/Library/Caches/com.apple.Safari/Cache.db
Click Go then move the Cache.db file to the Trash.
Quit and relaunch Safari to test.
If nothing above helped, troubleshoot Safari extensions.
From the Safari menu bar click Safari > Preferences then select the Extensions tab. Turn that OFF, quit and relaunch Safari to test.
If that helped, turn one extension on then quit and relaunch Safari to test until you find the incompatible extension then click uninstall.
If it's not an extensions issue, restart your internet modem and router. Then quit and relaunch Safari and try Facebook.

VPN Issues: Unable to access internet once connected.

I need to connect to my workplace via a VPN (Cisco IPSec) connection. Typically we use a Cisco VPN client to allow for access, but I'm using the built in support within Mountain Lion.
I am able to succesfully connect via the VPN connection, but once connected I am unable to proceed to access any websites, and when I lauch terminal and try to ping anything, it just sits and waits.
I have sorted the network connections so that the VPN is at the top of the sort order within the Network Preferences?
Any suggestions:

Maybe one of these Apple support articles will help:
http://support.apple.com/kb/PH10759
http://support.apple.com/kb/PH11067
http://support.apple.com/kb/PH10755
http://support.apple.com/kb/PH11138

Sending dial up connection to a wired base station?

Hi have a powerbook G4 Ti with airport card, an extreme base station and an emac with a dial up connection. I was wondering if anybody knows how I can route the dial up connection via ethernet to the base station so I can get the dial up connetion through airport to surf wirelessly on the powerbook. Any comments greatly appreciated. TIA

Presumably you don't want to do this the easy way, by using the dialup modem built into the Airport Extreme Base Station?
To use the dialup modem in the eMac is a bit convoluted. You need to do the following:
- set up internet connection sharing (in System Preferences->Sharing) on the eMac. See also:
http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh336.html
- you need to run the Airport Admin Utility from the Powerbook, and disable the router built into the Base Station by unchecking the box next to "Distribute IP addresses" found under the Network tab of that utility.
- you need to cable the Base Station's LAN (not WAN) port to the eMac's ethernet port
- and then every time you want to access the internet you must (a) first establish the dialup connection from the eMac and then (b) restart the Powerbook to force it to obtain a renewed IP address from the eMac.
It would also be much easier to just get rid of the Base Station, install an Airport card in the eMac, and use the eMac as a "software base station".

Unable to connect Dial up connections

Similar Messages

Maybe you are looking for