Unable to connect opmn after R12 installation

Hello,
After R12 getting error
exiting with status 204
/oracle/R12/dev/inst/apps/dev_devserver/logs/appl/admin/log/adoafmctl.txt
Please guide me
Edited by: user9376205 on Apr 11, 2011 10:48 PM

Some people have reported good results with R12 on Windows. I find R12 on Windows about 100 times more flaky than on Linux on identical hardware. Add an external hard drive into the mix, and you have very slim odd of it working correctly, or for very long. External hard drives try to power themselves down at inopportune times when you run Oracle products on them. You also increase your chances of needing a media recovery of your datafiles if your external hard drive loses power, and you have any datafiles there.
It is a couple days work, but I recently upgraded 11.5.10.2 Vision on Linux to R12 and have a 70GB footprint. This easily fits on a laptop 100 or 120 GB (non-perpendicular recording =>stable hard drive). Also the memory footprint is much less on Linux, and I can run R12 fine on 2 GB RAM laptops, even have R12 and 11.5.10.2 with Demantra Demand Planning OAS 10.1.3 running concurrently on a T61 with 4 GB of RAM. I have R12 Windows running on a Windows machine with 3 GB of RAM, and with all the applications up, I can log in, but RAM is at 3 GB and the page file is almost full. I only advise people to install R12 on Windows that have a ton of RAM and patience trying to get it and keep it all running.

Similar Messages

Unable to start APPS after R12 installation. But, DB is UP

Hi,
I have installed R12 on my laptop with External Hard drive connected. The installation completed successfully. I can connect to the DB tier. But, apps... sometime it connects and sometimes it doesn't. I was wondering is it something to do with the services I am starting?? Here is the sequence of the services I start for R12 Apps.
OracleServiceVIS
OracleVIS_db102_RDBMSTNSListenerVIS
OracleVIS_TOOLS_c_oracle_VIS_apps_tech_st_10_1_2TNSListenerAPPS_VIS
Oracle Process Manager for VIS_bhaskara
Do I need to start any extra services or the Order in which I am starting the services is not correct???
Thanks a lot for you help.
Bhaskara

Some people have reported good results with R12 on Windows. I find R12 on Windows about 100 times more flaky than on Linux on identical hardware. Add an external hard drive into the mix, and you have very slim odd of it working correctly, or for very long. External hard drives try to power themselves down at inopportune times when you run Oracle products on them. You also increase your chances of needing a media recovery of your datafiles if your external hard drive loses power, and you have any datafiles there.
It is a couple days work, but I recently upgraded 11.5.10.2 Vision on Linux to R12 and have a 70GB footprint. This easily fits on a laptop 100 or 120 GB (non-perpendicular recording =>stable hard drive). Also the memory footprint is much less on Linux, and I can run R12 fine on 2 GB RAM laptops, even have R12 and 11.5.10.2 with Demantra Demand Planning OAS 10.1.3 running concurrently on a T61 with 4 GB of RAM. I have R12 Windows running on a Windows machine with 3 GB of RAM, and with all the applications up, I can log in, but RAM is at 3 GB and the page file is almost full. I only advise people to install R12 on Windows that have a ton of RAM and patience trying to get it and keep it all running.

Getting error while applyin patch after R12 installation

I applying patch 8940108 after R12 installation. Pls. suggest what needs to be done.
Patch 8940108: Optional component(s) missing : [ oracle.precomp.lang, 11.1.0.7.0 ]
Prerequisite check "CheckRollbackable" on auto-rollback patches failed.
The details are:
Patch 7708340:
Archive Action: Source file "/db01/opt/oracle/product/11.1.0_egebrt/.patch_storage/7708340_Jan_28_2009_11_33_00/files/lib/libpls11.a/pkv.o" does not exist.
'oracle.rdbms, 11.1.0.7.0': Cannot update file '/db01/opt/oracle/product/11.1.0_egebrt/lib/libpls11.a' with '/pkv.o'
Archive Action: Source file "/db01/opt/oracle/product/11.1.0_egebrt/.patch_storage/7708340_Jan_28_2009_11_33_00/files/lib/libpls11.a/pkv.o" does not exist.
'oracle.rdbms.rman, 11.1.0.7.0': Cannot update file '/db01/opt/oracle/product/11.1.0_egebrt/lib/libpls11.a' with '/pkv.o'
ApplySession failed during prerequisite checks: Prerequisite check "CheckRollbackable" on auto-rollback patches failed.
System intact, OPatch will not attempt to restore the system
The following warnings have occurred during OPatch execution:
1) OUI-67078:Interim patch 8940108 is a superset of the patch(es) [ 7708340 ] in OH /db01/opt/oracle/product/11.1.0_egebrt
OPatch failed with error code 74

Hi;
The following warnings have occurred during OPatch execution:
1) OUI-67078:Interim patch 8940108 is a superset of the patch(es) [ 7708340 ] in OH /db01/opt/oracle/product/11.1.0_egebrt
Its mean if you have patch 8940108 on your system already and if you try to apply patch 7708340 than you dont need to apply patch 7708340,coz patch 8940108 already cover patch 7708340.
You can try this
opatch -lsinventory|grep 8940108
Regard
Helios

When I try to access a web page or link from a web page I receive an error message like "Server not found" or "Unable to connect." After repeated "try again" attempts the page will load, but when I click on a button or link, the same thing repeats. Why?

When I try to access any web page or any link from a web page, I receive an error message such as "Server not found" or "Unable to connect." After repeated "try again" attempts that the page will load, but as soon as I click on a button or link, the same thing repeats. Any suggestions?

When I try to access any web page or any link from a web page, I receive an error message such as "Server not found" or "Unable to connect." After repeated "try again" attempts that the page will load, but as soon as I click on a button or link, the same thing repeats. Any suggestions?

Unable to run cs6 after download & installation xp

I am unable to execute the program after installing Help?

I downloaded cs6 to external hard drive and tried to install but wouldnt
work. Will try to download to my laptop tonight directly to the hard
drive and see if that works.
Dave 7042327283
Pat Willener http://forums.adobe.com/people/pwillener created the
discussion
"Re: Unable to run cs6 after download & installation xp"
To view the discussion, visit:
http://forums.adobe.com/message/4633076#4633076Thanks for replying,

Unable to connect even after changing settings as advised

I recently talked my mother into buying an Apple and used iChat A/V as the primary excuse. However, we are unable to connect on iChat (through AIM), like many others I have read about in this forum.
I am using a Motorola DSL modem, style MSTATEA and a Belkin Wireless G router.
I have changed my Quicktime Settings to 1.5, my AIM Proxy to 443, and my bandwith to 500 as suggested. Here is the log:
iChat Connection Log:
2009-05-05 19:55:57 -0400: AVChat started with ID 3925203817.
2009-05-05 19:55:57 -0400: 0x1a622120: State change from AVChatNoState to AVChatStateWaiting.
2009-05-05 19:55:57 -0400: premaniacal4: State change from AVChatNoState to AVChatStateInvited.
2009-05-05 19:56:00 -0400: 0x1a622120: State change from AVChatStateWaiting to AVChatStateConnecting.
2009-05-05 19:56:00 -0400: premaniacal4: State change from AVChatStateInvited to AVChatStateConnecting.
2009-05-05 19:56:11 -0400: 0x1a622120: State change from AVChatStateConnecting to AVChatStateEnded.
2009-05-05 19:56:11 -0400: 0x1a622120: Error -8 (Did not receive a response from 0x1a622120.)
2009-05-05 19:56:11 -0400: premaniacal4: State change from AVChatStateConnecting to AVChatStateEnded.
2009-05-05 19:56:11 -0400: premaniacal4: Error -8 (Did not receive a response from 0x1a622120.)
Video Conference Error Report:
Video Conference Support Report:
0.310369 @Video Conference/VCInitiateConference.m:1584 type=2 (00000000/0)
[Connection Data for call id: 1 returns 1
173.018088 @Video Conference/VCInitiateConference.m:1584 type=2 (00000000/0)
[Connection Data for call id: 2 returns 1
783.115517 @Video Conference/VCInitiateConference.m:1584 type=2 (00000000/0)
[Connection Data for call id: 3 returns 1
783.254048 @Video Conference/VCInitiateConference.m:1599 type=2 (00000000/0)
[Prepare Connection With Remote Data - remote VCConnectionData: 1, local VCConnectionData: 1
840.894462 @Video Conference/VCInitiateConference.m:1584 type=2 (00000000/0)
[Connection Data for call id: 4 returns 1
867.823022 @Video Conference/VCInitiateConference.m:1584 type=2 (00000000/0)
[Connection Data for call id: 5 returns 1
1935.147674 @Video Conference/VCInitiateConference.m:1584 type=2 (00000000/0)
[Connection Data for call id: 6 returns 1
1935.297776 @Video Conference/VCInitiateConference.m:1599 type=2 (00000000/0)
[Prepare Connection With Remote Data - remote VCConnectionData: 1, local VCConnectionData: 1
Video Conference User Report:
0.000000 @:0 type=5 (00000000/16402)
[Local SIP port]
Thanks in advance!

Ok,
If it is this particular Motorola then it routes
http://portforward.com/english/routers/port_forwarding/Motorola/2210-02-1006/iCh at.htm
The link is a page on a site about setting up Port Forwarding.
The Main purpose for you though is the default access info so you can get to the Set Up pages.
Now as set up pages are never the same and can even vary from the same manufacturer it is worth checking all the tabs at the top and all the buttons on the right of this one and any links in the main section to see if it has UPnP
UPnP (Universal Pug and Play) is an Enable/Disable option of allowing the apps on a computer to control which ports are open. (They close after a period of NON use)
In the firewall section you may find the device's own firewall has 4 levels.
This should be at Low of Off for iChat.
If you can find UPnP enable that and Save Settings for any changes you make.
The same site's front index page list many more Belkins than Motorolas.
Which model specifically do you have ?
Having two devices that route causes it's own problems for iChat.
Like you say you have done for the Mac you should set the Modem to allow Static Routing (Called Manually on the Mac) to the Belkin.
This means finding out the Modem's IP (in the first link), the Subnet Mask it uses and the DNS Servers from the ISP.
This info needs to be copied in the corresponding boxes that the Belkin has for the Mac's Network Preferences and tabs after you change it from Getting an IP Automatically or similar phrase.
Summary,
Confirm Belkin Model.
Set up Belkin and Motorola/Netopia to be Static Routing
Open ports in both to allow iChat (using UPnP where possible)
4:47 PM Friday; May 8, 2009
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

Not able to open forms After R12 installation

Hi,
I recently installed R12.0.4 on windows 2003 sp1. Post Installation tests were successful, and I am able to login with no issues. But when I try to open any form, no form is opening.
Thanks,
Raj
~ moving this to R12 Forum
Edited by: CalvinNHobbes on Mar 14, 2009 3:56 PM

Duplicate thread ..
Not able to open R12 forms after successful installation
Re: Not able to open R12 forms after successful installation.

DNS error when launching Application login page after R12 installation

Hi ,
I installed R12.0.4 on windows server 2003.
After installation when I launch the home page, its giving dns error saying that <domainname>.<hostname> cannot be loaded.
I checked the apache alert log, it is trying to access an IP that is commented out in the host file. I am not sure where it is picking it up from. I installed loopback adapter before the installation and the entries in the host file also seem fine. Please help me out, this is the 2nd installation but the issue is still not resolved. Please let me know if you need anymore details.
Thanks !

Hi Dharmshila,
Since you were not able to access the application URL using the IP Address then I believe it is an issue with the application/database services. To verify that all application services are up and running properly, please do the following:
- Open a new DOS session
- cd %INST_TOP%\apps\<SID>_<hostname>\admin\scripts
- Issue "adopmnctl.sh status"
- You should get something similar to the following:
Checking status of OPMN managed processes...
Processes in Instance: PROD_db2.db2.domain.com
-------------------+--------------------+---------+---------
ias-component      | process-type       |     pid | status
-------------------+--------------------+---------+---------
OC4J               | oafm               |    3800 | Alive
OC4J               | forms              |    2528 | Alive
OC4J               | oacore             |    3112 | Alive
HTTP_Server        | HTTP_Server        |     172 | Alive
exiting with status 0
ERRORCODE = 0 ERRORCODE_ENDRegards,
Hussein

JMS unable to connect MQ after idling for 10 min

Hi,
I have come up with a working Async/Sync interface which is MQ->XI->RFC->CRM and CRM->RFC->XI->MQ again.
I sent several messages to create tickets in CRM and CRM created the tickets successfully and sent back reponses back to MQ. MQ received the reponses messages.
The problem is that after sending the messages, I waited for 10min or so and I started to send messages to create tickets in CRM. The tickets are again created successfully and tried to send the reponses messages to the receiver MQ but in the Communication Channel Monitoring, error is shown:
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Connector for ConnectionProfile of channel: MQ_XML_Receiver_CC2on node: 74922450 having object id: 05e949939d4c3a649aa55b273caa390b encountered error: MQJMS2007: failed to send message to MQ queue in sending to destination queue:///MCLCT.INVESTIGATION.XML.01?targetClient=1, the message message: JMS Message class: jms_text JMSType: null JMSDeliveryMode: 2 JMSExpiration: 0 JMSPriority: 4 JMSMessageID: null JMSTimestamp: 1192218203185 JMSCorrelationID:470bb330-f40a-01ab-0000-000081b0b8e9 JMSDestination: queue:///MCLCT.INVESTIGATION.XML.01?targetClient=1 JMSReplyTo: null JMSRedelivered: false JMSXDeliveryCount:0 <?xml version="1.0" encoding="UTF-8"?> <InvestigationUpdateXML_DT><INVESTIGATION_UPDATE><LW_INVEST_N Another 162 character(s) omitted: javax.jms.JMSException: MQJMS2007: failed to send message to MQ queue
So I have to stop the particular JMS channel and start it again in order to send messages over to the receiver MQ.
Anyone has an idea why is it so? Is it a MQ problem or JMS adapter problem existing on the XI part?
Appreciate if someone can give some acruate info to solve the hassle of restarting communication channel everytime.
Thanks in advance.

Hi,
I have identified that the problem lies with sending messages to remote queue.
For local queue, I am able to send messages anytime. Eg. sending 10 messages, wait for 30 min and send another 5. The JMS communication channel works fine.
For remote queue, I sent 10 messages and wait for just 5 min and sent another 1. The communication channel again threw out such error message again. In short, it is unable to put the message in MQ. I have to restart the com channel again, in order to send the message over to MQ.
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Connector for ConnectionProfile of channel: MQ_XML_Receiver_CC2on node: 74922450 having object id: 05e949939d4c3a649aa55b273caa390b encountered error: MQJMS2007: failed to send message to MQ queue in sending to destination queue:///MCLCT.INVESTIGATION.XML.01?targetClient=1, the message message: JMS Message class: jms_text JMSType: null JMSDeliveryMode: 2 JMSExpiration: 0 JMSPriority: 4 JMSMessageID: null JMSTimestamp: 1192218203185 JMSCorrelationID:470bb330-f40a-01ab-0000-000081b0b8e9 JMSDestination: queue:///MCLCT.INVESTIGATION.XML.01?targetClient=1 JMSReplyTo: null JMSRedelivered: false JMSXDeliveryCount:0 <?xml version="1.0" encoding="UTF-8"?> <InvestigationUpdateXML_DT><INVESTIGATION_UPDATE><LW_INVEST_N Another 162 character(s) omitted: javax.jms.JMSException: MQJMS2007: failed to send message to MQ queue
So is there any way to configure the JMS adapter to connect the MQ as it wish with success and send the messages anytime of the day? The MQ queue admin has decided to use remote queue and it's hard to convince them to switch to local queues and I am not an expert on MQ technologies, I can't list out the pros and cons of having local queues.
Regards.
Chee Nam
PS: Appreciate if anyone can give some pointers.

After r12 installation error autocofig

Hi,
after install R12 1.1
on rhel 5
while running autocofig takes 3 hours to complet.
ERRORCODE = 0 ERRORCODE_END
please guide me

we have changed ip address of server AFAIK Oracle apps do not refer to IP address so this change should not have impacted anything unless you have changed hostname, ports etc..
The only reason i can thnk off is network issue when autoconfig makes connection with db(hoping it on different server)...but if this is the case then every connection from apps to db should take more time....is their any network change with this IP?
As suggest by husssien did you check autoconfig logs to confirm as where it is stucking....maybe if you can run it again then check at which stage it is taking long time....
Thanks,
JD

Unable to edit documents after AVG installation

I have a dual drive Toshiba laptop, which has been recntly updated from Vista to Windows 7. Windows 7 has taken up most of my C drive, so I have had to put programs onto the other data E drive. The other day I bought AVG ant-virus 2011 and put it onto my computer (data e drive). Since then, even after taking avg off, I am unable to edit documents on office Word or OpenOffice. it seems to be doing it to my external drive (that I have added) as well as now. Its strange since this only started as soon as i used AVG. Any suggestions what the problem could be? How it can be resolved.
I really need some help, as my computer seems to be slowly dying! Tried to get in contact with AVG but they seem just to be ignoring the problem at the moment.
Thanks for any help,

Hi buddy,
> Its strange since this only started as soon as i used AVG.
In this case I would contact AVG directly if they can say something about this or if its a known issue. I never heard about this but AVG should know what to do now.
I dont know what notebook you have but Im pretty sure its a software issue and it seems to be related to AVG

Unable to launch forms after fresh installation of 12.1.1

Hi,
I have installed fresh production installation of Oracle Applications 12.1.1 on my laptop using oracle virtual box. Everything is working fine, i am able to connect to the URL from my host machine i.e Windows 7 with IE 8 browser. Able to login and navigate through HTML pages. However, when i try to launch forms , it has downloaded the java plug in and then IE crashes saying Internet explorer has stopped working. I could not find any error messages. It also says that "Applet oracle/apps/fnd/formsClient/FormsLauncher inited".
Need help to resolve this.
Thanks .
Karthika

Hi Hussein,
Are you using any VPN/Proxy?
-- No , I have configured my windows 7 (Host Machine) to connect to oracle by adding the ip address and host.domain details in c:/windows/system32/drivers/etc/hosts file.
-- Made the ip address of the linux machine in virtual box as static
-- Disabled the firewalll in the linux machine.
Can you reproduce the issue with any other browser (Firefox) and see if it works?
-- I have tried to open the forms in mozilla firefox. However, it always prompts me to download the sun java plug in and never launches the forms.
Can you find any errors in the application.log file?
--Found the below errors:
13/01/23 14:11:30.419 10.1.3.4.0 Started
13/01/23 14:11:44.116 html: 10.1.3.4.0 Started
13/01/23 14:47:39.297 html: oracle.apps.fnd.security.LeakDetectionFilter.initialized:1358974059297
13/01/23 14:47:39.297 html: LeakSetting:
global:true,session:false,aggressive:false,stderr:false,appslog:false,corelog:false
ignoring:null
13/01/23 14:48:08.766 html: Broken pipe
13/01/23 14:48:08.766 html: Broken pipe
13/01/23 14:48:08.767 html: Broken pipe
13/01/23 14:48:08.767 html: Broken pipe
13/01/23 14:48:08.767 html: Broken pipe
13/01/23 14:48:08.767 html: Servlet error
java.io.IOException: Broken pipe
at sun.nio.ch.FileDispatcher.write0(Native Method)
at sun.nio.ch.SocketDispatcher.write(SocketDispatcher.java:29)
at sun.nio.ch.IOUtil.writeFromNativeBuffer(IOUtil.java:104)
at sun.nio.ch.IOUtil.write(IOUtil.java:75)
at sun.nio.ch.SocketChannelImpl.write(SocketChannelImpl.java:334)
at java.nio.channels.Channels.write(Channels.java:60)
at java.nio.channels.Channels.access$000(Channels.java:47)
at java.nio.channels.Channels$1.write(Channels.java:134)
at com.evermind.server.http.AJPOutputStream.endRequest(AJPOutputStream.java:117)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:317)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:619)
209,9 97%
Kindly review and help me with this.
Thanks
Karthika

Unable to connect VPN after OS update

hi, I recently updated my MacBook Pro to OS 10.9.2 and since then have been unable to stay logged into VPN for more than 5 mins. after about 5 mins, it freezes and I have to log out and restart the machine

Hello,
Unfortunately, the very thing you state that you do not wish to do is actually the recommended course of action, given what you have described.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

My i5 will not connect to any wifi's. Its says unable to connect even after I forget wifi's

I can not connect to any wifi's.

Restart your WiFi router by removing power to it for 30 seconds.

BPCNW 7.5 SP7 - Unable to connect to backend after installation

Hi Experts,
I have installed the BPC NW 7.5 SP7 with CMS authentication but when i launch the BPC server manager, it ask for user id and password. But when i enter the password for the bpc_sysadm, it gives the error "unable to connect to backend Abap system"
I am stuck and urgent help is required.
In backened, entry in the table UJA_SVR_DEFAULT is the hostname of of CMS.
I dont have sapmsg.ini file under c:
Windows as shown in the below log. Does it matter?
Below is the error log
2.0 #2011 08 14 20:06:39:223#+2:00#Error#ServerMgrService##EPM-BPC-NW##dbaf8fa3-8af1-478e-8091-082680638a84###TestConnection#BPC_SYSADM########Plain##<Exception><ExceptionInfo><exType>SAP.Connector.RfcException</exType><exMessage>Open file 'C:
Windows
sapmsg.ini' failed</exMessage><exSource>SAP.Connector</exSource><assembly>SAP.Connector.Connection, SAP.Connector, Version=2.0.0.0, Culture=neutral, PublicKeyToken=50436dca5c7f7d23</assembly><stackTrace>   at SAP.Connector.Connection.Open()
   at SAP.Connector.Connection.BeforeCall(SAPClient sapclient)
   at SAP.Connector.SAPClient.BeforeCall()
   at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn)
   at SAPServerMgrProxy.SAPServerMgrProxy.Uja3_Get_User_Langu(UJ0_S_USER Is_User, String& E_Langu, UJ0_T_MESSAGE& Et_Error)
   at OSoft.Services.Common.ApplicationServiceProxy.ContextUser.GetUserLanguageProxy.getABAPUserLanguage()
   at OSoft.Services.Common.ApplicationServiceProxy.ContextUser.init(Hashtable htContext)
   at OSoft.Services.Common.ApplicationServiceProxy.ContextUser..ctor(String contextXML)
   at Osoft.Services.Webservice.ServerMgrService.ServerMgrService.TestConnection(String strParameter, String strContext)
</stackTrace><exTime>8/14/2011 8:06:39 PM</exTime></ExceptionInfo><WebServiceLayer><machineName>SVRMSA030</machineName><userName></userName><csnComponent>EPM-BPC-NW-SRV</csnComponent><className>ServerMgrService</className><MethodInfo><methodName>TestConnection</methodName><Params><strParameter></strParameter><strContext>
<Context>
<AppSet>
</AppSet>
<UserID><![CDATA[BPC_SYSADM]]></UserID>
<App><![CDATA[]]></App>
<Language><![CDATA[]]></Language>
<Session>
<SessionID><![CDATA[]]></SessionID>
<Machine><![CDATA[]]></Machine>
<Machine_Name><![CDATA[SVRMSA030]]></Machine_Name>
<ModuleName><![CDATA[]]></ModuleName>
</Session>
<CurrentView>
<Dim>
<Name></Name>
<Value></Value>
</Dim>
</CurrentView>
</Context></strContext><strSecurity>
<SECURITY>
<CheckSum><![CDATA[4jyETibRHl1Mk3AfQ/l9m8tNWjE=]]></CheckSum>
<IsZipped><![CDATA[False]]></IsZipped>
<IsEncrypted><![CDATA[True]]></IsEncrypted>
</SECURITY></strSecurity></Params></MethodInfo></WebServiceLayer><additionalInfo></additionalInfo><displayMode>ERROR</displayMode></Exception>#
Regards
Sagar
Edited by: sagar chouhan on Aug 14, 2011 11:30 PM

Thanks for your reply. I tried using "BPC_SYSADM" and "BPC_ADMUSR" but for both the users I am getting the same error. i checked the servername in the connection wizard it is correct. I am doing this for first time after installation.
In the backend, i checked the table UJA_SVR_DEFAULT and the entry for all the 3 fields are as below
ADMIN    -- CMS hostname
SYSADMIN - CMS Hostname
USER -- CMS hostname
Regards,
Sagar

Unable to connect opmn after R12 installation

Similar Messages

Maybe you are looking for