Unable to Connect to Airport - get error -6753

I installed the Airport, set up an wireless network but been unable to connect.
I tried the hard reset described in "Resetting Airport Express" guide.
When I load Airport Utility; I am asked to Rescan with receive an error -6753, no configuration displayed. Attempting to use Configure other has the same result. I am able to use the drop down file menu only, BaseStation and Settings are protected (greyed out).
I have tried to uninstall Airport & Bonjour software to no effect. I don't know my way around the configuration very well.
Can you help.

I have a Mac and two Windows machines (and most guest machines on my network are Windows). One Windows machine is running Vista, one is running Windows 7 and have also tested with XP. None of the Windows machines will show the AirTunes speaker (Airport Express) options UNLESS my Mac is also turned on. This is totally bizarre and I cannot solve it with any settings... I've tried so many things... latest versions, etc, etc.
To recap, my Mac connects fine, all the time. No Windows machines ever show the dropdown selector in iTunes UNLESS my Mac is on the network. When it's on the network, the Windows machines work with AirTunes just fine.
Anyone have any ideas?

Similar Messages

3G MiFi -- Airport Express -- Ethernet client possible? Getting error 6753

Hi All,
I am really struggling setting up a friends Airport Express (new N series version).
I told him to buy an Airport Express to allow his Home Cinema Amplifier (Denon AVR 1912) to gain access to his wireless network/internet (via Ethernet cable). This is to use Airplay, as well as the Denon remote app on his iPhone.
His WiFi at home is provided by a Three MiFi device made by Huawei (http://store.three.co.uk/Mobile_Broadband/MiFi)
His PC connects to the WiFi generated by this unit using an N series USB dongle fine. His, and my iPhone connect to the MiFi's WiFi ok too.
Using the Airport utility it sees the Airport Express, and I set it up to JOIN an existing wireless network (typing in the correct wifi password), and have 'allow ethernet clients' ticked. This is also named proxySTA mode I have read.
After setting this, the Airport Utility disconnects from his home WiFi, connects to the Airports WiFi, but then after this I constantly get error -6753. Firewall is turned off so I do not feel it is a security issue. I get flashing amber light on the Airport, or if green light it still will not provide his Denon amplifier with an ip address (Denon amplifier set to use DHCP)
The web server application running on the MiFi device shows an ip address given to the Airport Express fine (same ip address as the Airport utility shows)
Taking the airport express to my house I was eventually able to set it up to connect to my WiFi, and have a laptop connected to the Airport Express via an Ethernet cable to provide the laptop with network/internet access...so I know this set-up is definately possible.
Anyway, does anyone know if doing this with one of these MiFi type products is possible with the Airport Express please? I would tell him to buy an Airport Extreme if that is the solution.

Does anyone know if an Airport Express has any advantage over something like a Netgear Universal WIFI Adapter (http://www.amazon.co.uk/Netgear-Universal-Wifi-Internet-Adapter/dp/B003VIWJYI/re f=sr_1_1?ie=UTF8&qid=1332407475&sr=8-1)
for what he is trying to use it for, i.e. WiFi --> AV Equipment's Ethernet port.

While Configuring Siebel Server we are getting "Unable to Connect to Gateway server" error in siebel 8.2.2.14

Hi
While Configuring Siebel Server we are getting "Unable to Connect to Gateway server" error in siebel 8.2.2.14
Our OS is windows 2008 R2 64 bit,Orcale client is 11g 32 bit and Oracle DB is in 11g.We are also able to connect to DB using ODBCSQL.
Please help.
Regards
Shuvendu

Hello Shuvendu,
Thanks for using Oracle Communities.
About your error, there could be many reasons, To start with, please have following knowledge article to know possible reasons.
C028: "Unable to Connect to the Siebel Gateway Name Server" Logged By Configuration Wizard (Doc ID 1391312.1)
I hope it helps.
Best Regards,
Chetan
P.S. If any one of the provided responses has been correct or helpful it would be great if you could mark them as appropriate.

Airport extreme error 6753

On my airport extreme router I am getting error 6753. How do I fix this. I have reset my router and everything but it will not let me update

This is a communications error - it can be due to many causes - you have not indicated your OS, AU version, what generation the Extreme is or what kind of reset you did - if you supply this info, you will have more of a chance of getting a response.

HP Photosmart 7520 unable to connect to web services error

I've used my HP Photosmart 7520 for years without issue scanning to email. Now I get "Unable to connect to Web Services" error message. I've done all the procedures listed in the blog, including changing the manual DNS server configuration and still get the same error. Help!

Hi @ajbond77,
Welcome to the HP Support Forums. I understand that you are getting a connection error message when attempting to use the scan to email feature of your Photosmart 7520 printer.
If you have already set a manual IP address and manual DNS servers, then please call HP’s Cloud Services at 1-855-785-2777 if you live in the USA/Canada region. If you live outside the USA/Canada region please click here to find the Technical Support number for your country/region.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

TC will not communicate with Airport Utility error -6753. Wireless, internet (unsecure), and backup work fine., ,

TC is not communicating with Airport Utility (error -6753). I do have a flashing amber light. The wireless (printer, TiVo), internet (unsecure), and backups to Time Capsule work fine. I have done many hard and soft Resets, but that has not helped. Airport utility show the TC as amber and but won't let me findout the status of what is causing the problem.

What mode is the TC running in, router or bridged? You can sometimes have issues if the TC is bridged and the network is getting IP in a different subnet.
I would recommend disconnecting the TC from the network and plugging it directly into the Mac via ethernet. You may also need to do a reset if the dhcp is off, as in bridge.
Also note are you pressing the reset for long enough that the led on front starts blinking rapidly.. hold it in for 15sec to be sure.

HT3204 unable to purchase music - keep getting error code 5002 on - using Vista

Unable to purchase songs - keep getting error code 5002 - using Vista

I am having the EXACT same problem. It started on June 16th also. I found out that code 5002 is supposedly a billing issue. The article directed me to edit my billing information (even though it was correct). I tried to submit the new information and was told my request could not be processed, try later. I have been trying for 3 days. Was in contact with customer service. first they said it was an Itunes Stores issue with the software. they told me it was resolved. Then they had me uninstall and then reinstall Itunes, which still didnt resolve it. I am starting to think its still an Itunes Store issue. Still trying to cintact customer service about this.

Can't connect to Yahoo! calendar.When trying to connect Mail, Contacts, Messages and Notes connect but Calendar and Reminders don't connect. I get error A secure connection couldn't be established.

Can't connect to Yahoo! calendar.
When trying to connect Mail, Contacts, Messages and Notes connect but Calendar and Reminders don't connect.
I get error A secure connection couldn’t be established.
I think a lot of people are getting this. Some solutions with Gmail but v little with Yahoo!
Any answers?
drlounger.
Yosemite
Retina macbook pro 2012

Dear Al
Thanks for your reply.
I have just found out what's wrong. I went to the 'more info' section of my Chitchat application and it took me to a link where it explained that Yahoo Chat has ditched chatting with the Java protocol and chatters can now only chat via the Yahoo Messenger protocol, which is Yahoo Instant Messenger with Voice. Unfortunately Yahoo doesn't provide a platform for Yahoo Voice for Macintosh computers. Though the original link I went to provides another link to a thing called 'Adium' from which a Mac can access Yahoo Chat's new protocol, although it's not fully developed yet.
Oh...and thanks so much for letting me know about the Java update release. I did not know that I have to upgrade my system first to recieve the latest update information.
Regards
Tina

Unable to connect to Airport Extreme since installing Mountain Lion

Unable to connect to Airport Extreme since installing Mountain Lion. If I go to Finder > Shared I can see it listed but then when I go to connect to it won't. I can see it in Airport Utility and connect to the internet but when I try and connect to the base station to use my hard drive / printer it won't connect?
Tech Support tried saying it could be the devices attached don't have an update for them yet but doesn't explain why I can't connect to the base station. In their defence I can see it in airport utility so the base station does work with the OS X
However I've just tried connecting by an ethernet cable and connects fine?

Ok .
Power down the base station (Mine is connected to a 4 way so i down powered base station, printer and hard drive) powered back up and now when I go to finder then look at the shared section I can view my files on the base station.
Hope this helps

Airport Express error 6753 and IPAD2 "interference"

Airport Express works fine with my pc(Vista) until my brother-in-law comes with his IPAD2 and connects. My pc will connect to the Express(wireless network), but won't go on the internet. Can't get the Airport Utility to communicate either: error 6753. When the IPAD2 leaves everything works fine again. Any ideas? Thanks

I had a hard time to re-configure my Airport Express after an automatic update by Apple (New firmware for Airport Extreme) It just wouldn't work on my Leopard machine. (express was not responding, amber light flashing, unable to fetch configuration settings...etc.) Now, I've downgraded the firmware for the Express again (from 6.3 to 6.1.1) and i used a powerbook with tiger installed to configure the express. Now it all seems to work again. It took a lot of time to figure things out, wich is a shame, but I'm happy to have it all working again. And perhaps this knowledge is usefull to others.

Airport Express error -6753

Trying to extend network with airport express and get error code-6753. What can I do to get it working?

I had a hard time to re-configure my Airport Express after an automatic update by Apple (New firmware for Airport Extreme) It just wouldn't work on my Leopard machine. (express was not responding, amber light flashing, unable to fetch configuration settings...etc.) Now, I've downgraded the firmware for the Express again (from 6.3 to 6.1.1) and i used a powerbook with tiger installed to configure the express. Now it all seems to work again. It took a lot of time to figure things out, wich is a shame, but I'm happy to have it all working again. And perhaps this knowledge is usefull to others.

Unable to connect to Services Registry(error) while connecting from NWDS

Hi SDN friends,
I am trying to do WSDL import from NWDS (Developer Studio SAP NetWeaver 7.1 Composition Environment SP03 PAT0000 Build id: 200710302120 ) and i am getting following error
"Unable to connect to Services Registry"
Below are the service regsitry details i am passing
window --> Preferences
Service Registry (UDDI Service)
Server Name:sr.esworkplace.sap.com
Server Port:sr.esworkplace.sap.com
Server Port:50000
Server HTTPS Port:50043
Inquiry Path:uddi/api/inquiry
Publish Path:uddi/api/publish
Security Path:uddi/api/security
Classification Service
Server Name:sr.esworkplace.sap.com
Server Port:50000
Server HTTPS Port:50043
Classification Path:ClassificationService/CS?style=document
I am using the following credentials for login to UDDI Service http://sr.esworkplace.sap.com
login/pwd: sruser
password: esword123
I tried with two different systems (office and Home) , bit still not connecting.
Waiting for experts answer.
Thanks
Aravinda

Hi,
You wrote that you connect to the SAP uddi:
Service Registry (UDDI Service)
Server Name:sr.esworkplace.sap.com
Server Port:sr.esworkplace.sap.com
Server Port:50000
Server HTTPS Port:50043
Inquiry Path:uddi/api/inquiry
Publish Path:uddi/api/publish
Security Path:uddi/api/security
sr.esworkplace.sap.com is not on your home pc. Its a SAP public uddi.
If you want to connect to your own pc than your configuration would be sompething like this:
Server Name:localhost
Server Port:50000
Server HTTPS Port:50043
Inquiry Path:uddi/api/inquiry
Publish Path:uddi/api/publish
Security Path:uddi/api/security
And you shouldn't use this login data
login/pwd: sruser
password: eswork123
regards,
v s
Edited by: v s on Jul 2, 2008 9:31 AM
Edited by: v s on Jul 2, 2008 9:34 AM

Unable to connect through sqldeveloper vendor error code 17002

I am using sqldeveloper on windows 7 . The sql developer version is given below
Java(TM) Platform     1.6.0_23
Oracle IDE     2.1.1.64.45
Versioning Support     2.1.1.64.45
I am getting this error while connecting to the db.
IO exception: The Network Adaptor couldnt establish the connection.
Vendor code: 17002
I am able to connect the db through the command prompt.
Listener status
C:\Users\Dev D>lsnrctl status
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 19-DEC-2010 12:43:52
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Production
Start Date 19-DEC-2010 12:26:31
Uptime 0 days 0 hr. 17 min. 21 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Default Service XE
Listener Parameter File C:\oraclexe\app\oracle\product\10.2.0\server\network\admin\listener.ora
Listener Log File C:\oraclexe\app\oracle\product\10.2.0\server\network\log\listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC_FOR_XEipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=DevD-PC)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=8080))(Presentation=HTTP)(Session=RAW))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "XEXDB" has 1 instance(s).
Instance "xe", status READY, has 1 handler(s) for this service...
Service "XE_XPT" has 1 instance(s).
Instance "xe", status READY, has 1 handler(s) for this service...
Service "xe" has 1 instance(s).
Instance "xe", status READY, has 1 handler(s) for this service...
The command completed successfully
tnsping
C:\Users\Dev D>tnsping xe
TNS Ping Utility for 32-bit Windows: Version 10.2.0.1.0 - Production on 19-DEC-2010 12:49:39
Copyright (c) 1997, 2005, Oracle. All rights reserved.
Used parameter files:
C:\oraclexe\app\oracle\product\10.2.0\server\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = DevD-PC)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = XE)))
OK (14000 msec)
tnsnames.ora
XE =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = DevD-PC)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = XE)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(CONNECT_DATA =
(SID = CLRExtProc)
(PRESENTATION = RO)
listener.ora
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = C:\oraclexe\app\oracle\product\10.2.0\server)
(PROGRAM = extproc)
(SID_DESC =
(SID_NAME = CLRExtProc)
(ORACLE_HOME = C:\oraclexe\app\oracle\product\10.2.0\server)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(ADDRESS = (PROTOCOL = TCP)(HOST = DevD-PC)(PORT = 1521))
DEFAULT_SERVICE_LISTENER = (XE)
Could someone help me what am i missing here

Hi Deepak,
How did you find that out?
I'm havng the same problem, unable to connect via sqldev but command prompt is okay.
Checked everything I can possibly check and I really dont know what to do

Unable to connect to report server Error: Message : ErrorCode : 10061

I have configured a report server oracle 10.1.0.2 app server on solaris 10. when the user tries to connect through the front end application web he gets the below error:
Type : System.Net.WebException, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=
Message : Unable to connect to the remote server
Source : System
Help link :
Status : ConnectFailure
Response :
Data : System.Collections.ListDictionaryInternal
Inner Exception
Type : System.Net.Sockets.SocketException, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=
Message : No connection could be made because the target machine actively refused it 10.10.1.180:4444
Source : System
Help link :
ErrorCode : 10061
SocketErrorCode : ConnectionRefused
NativeErrorCode : 10061
Data : System.Collections.ListDictionaryInternal
TargetSite : Void DoConnect(System.Net.EndPoint, System.Net.SocketAddress)
Can anyone please let me know which files or conf files I need to look at.
I did not see any errors in the server trace files. The tnsnames look good. They connect to a oracle DB

In the ssl.conf I put the listen port as 4444 ,
but when I go to the OEM of the report server - ports , it does not show me the port used as 4444 , the field is blank.
is there any place I need to make the port change to 4444
thanks

Unable to connect to Airport Extreme on a daily basis without reseting the router

I have an Airport Extreme Router connected directly to my cable modem. My Airport Utilities are current and router is set to 7.5.2 firmware (latest). I have nine devices set to connect via wireless and three that are connected via cable. I am not using the 5ghz as there are some older devices that will not connect. On a daily basis all of the wireless systems will not connect. I get a password incorrect on low signal error. I have reset the password from over eight characters to eight to see if that was the issue. No dice. I have to manually unplug the router and the wait for it to reset then all the devices will connect. The three devices I have connected directly do not have this issue.
I have deleted the network configurations from the devices and tried to reconnect but I get the same error, password incorrect or signal not found even when it shows that I have five green bars. I have the router set to assign DHCP and changed the lease to 60 days. Since the router does not have UPnP, I have a few ports open to allow my XBox and PS3 clear connection. I have also reset the whole router and started it from scratch. Rebuilding the network with a different name, password and such.
I have seen on the board that others are having issues with this. Aside from disconnecting the power from the router I have not found a solution. This issue started a month or so ago. Does anyone have a solution? Is this a result of updating the firmware to 7.5.2 which came out in July? Or is there something that I am completely missing in troubleshooting?

The router has been working for a bout a year or more. Would it suddenly go snafu and need to be replaced? Seems to me it would be having the issue from the start.

Unable to Connect to Airport - get error -6753

Similar Messages

Maybe you are looking for