Unable to connect to wi fi, system crashes with 8.02 IPad 2 Wifi

Since installing 8.0 and 8.02 my Ipad has been rendered worthless. I frequently cannot connect to my WI FI networks and when I can I cannot execute a search (Google) via Chrome or Safari. My Ipad locks requiring a "hard reboot)
Question is there anyway to reinstall the previous OS. I'm not 100% dependent on my Samsung G4 Android phone (which connects to the same WI Fi with no problems

You are most welcome

Similar Messages

TS1702 I bought a apple ipad mini recently, I am unable to connect/Pair my Nokia C5 Phone with Ipad Mini Via Bluetooth. Plz suggest.

I bought a apple ipad mini recently, I am unable to connect/Pair my Nokia C5 Phone with Ipad Mini Via Bluetooth. Plz suggest.

iOS: Understanding Personal Hotspot
http://support.apple.com/kb/HT4517
 Cheers, Tom

I am unable to connect to the itunes store. I have tried via wifi and cellular. Operating system and itunes are latest versions. Have powered down the ipad and restored settings. Can puchase new songs and apps with no problem....just can't update apps.

I am unable to connect to the itunes store to update apps on my ipad.
I have tried both wifi and cellular connections.
I have the most recent updates of the operating system and itunes.
I have powered down and reset and restored.
I have no problem purchasing and downloading new apps or songs.
Please help!

Refer to this article"
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368

Unable to connect to SMC Client system from SMC Server System

hi,
i have installed SMC 3.6.1. on Solaris 10 OS . The SMC agents are installed are all system but SMC Server is unable to communicate with Client systems. SMC Server System can Ping and Telnet all the SMC Client systems , but unable to connect from SMC .
Please guide how can resolve this problem
best regards,
Adeel Mehmood

Hi Adeel,
i have installed SMC 3.6.1. on Solaris 10 OS . The
SMC agents are installed are all system but SMC
Server is unable to communicate with Client systems.
SMC Server System can Ping and Telnet all the SMC
Client systems , but unable to connect from SMC .
Please guide how can resolve this problemSo, you can login to SunMC, but you're unable to make an icon for any of your Agents? Or you have icons you made bofre but when you click on them now you get errors?
If these are new Agents, do they have more than one netowrk interface? If so, they may have security information for the "other" network (the one the SunMC Server's not on). You can try manully specifying the correct network for one Agent and see if it helps:
http://forums.halcyoninc.com/showthread.php?t=2
Regards,
[email protected]
http://www.HalcyonInc.com
!! New !! : http://forums.HalcyonInc.com

Webcam Live Pro causes system crash with Windows XP Home

Ever since installing Webcam Live Pro I have been having random system restarts. This ONLY happens when the webcam is being used. It happens when using the Creative Webcam Center or another application. Sometimes the restart will happen after a few minutes, and other times an hour or more. I am running Windows XP sp2 with all patches, and there are no driver conflicts listed in Device Manager. I have the cam set at 60 hz.
Even though there are no listed driver conflicts in Device Manager, there clearly is a driver conflict that occurs from time to time. I have read of other people having this same problem on this forum with Webcam Live Pro. I am using the driver ...0 which is dated 0//2004, and the automatic update program on this web site says that I am using the latest driver. But in the download section of this web site, the latest driver is listed as .0.0.0 and dated November 9, 2004. The driver numbers or dates do not match, and the driver on the web seems to have an earlier number but a later date!?
Does anyone (especially a Creative tech support person who may be reading this post) have any idea what to do? The driver version is one issue. But the big issue is the system crashes.
Best,
CB

Solution! I discovered the problem causing the system crash, and I think it is sufficiently interesting to note here so that others may benefit from what I discovered. First, there is no fundamental problem/conflict with the driver for Webcam Live Pro. The trouble in my instance is that I was running another program that utilized the web cam, and that program conflicted with the Webcam Live Pro program that was constantly running in the system tray. Basically, the program in the system tray is loaded with the set-up for Webcam Live Pro. It constantly monitors the computer system to see if the cam is connected to the computer. When it does this while another program is using the cam, the conflict occurs, causing the entire computer to reboot. The solution is to right mouse click the icon for Webcam Live Pro in the system tray, go to settings, and to remove the check that allows the program to check for the presence of the web cam. Just to be safe, I then also exited the Webcam Live Pro program from the system tray so that nothing from that program could interfere with my use of the webcam using another program.
The result is that the webcam is rock solid, with no system crashes. I have been running it nonstop for hours without a problem.
I hope this helps someone else.
Best,
CB

TS1398 Unable to connect to my home Wi-Fi with my iPad. I have tried just about everything I could find in the Apple Support Community. Perhaps this is a new known problem??

I have tried all the recommend solutions I could find in the Apple Support Community. I noticed a couple of weeks ago the iPad was acting funny about connecting to the internet via the Wi-Fi. The past two days, it wasn't able to connect to the wireless router at all. It recognizes that the wireless router network exists, it just can't join. I tried the re-boot method. I have re-set the network setting on the iPad back to factory. I even thought my old wireless router may have issues and bought a new one yesterday, and the iPad actually worked for about 24 hours and now I am back to the iPad not being able to connect to the wireless router. I have re-entered the wireless router from scratch thinking that there may have been a bug in the setup. I have removed the security settings from the wireless router to see if that may have prevented the iPad from connecting but got the same message "Unable to Join". I have cleared the cookies and data, as that was also a recommended fix, but that didn't work. I also connected the iPad to the computer so that I could check for the latest update. iPad has the latest version, so that solution didn't work. Does anyone out there got any other ideas, or are you experiencing the same problem? Is there some known issue that I am not aware of???

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130?tstart=60
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

I had a system crash(with Vista).I cannot start up windows on that drive.I have Win 7 on a new drive.I can access the files on the old drive to copy them.I would like to know how to find and copy the bookmarks from Firefox on the old drive and copy to the

Hi:
I had a system crash and I cannot start windows (Vista)on it.I have a new drive running Win 7.How do I copy the files from the old drive's files to the new?The Bookmark files that is.
Thanks.Any help is appreciated.
Shaun

This could help.
http://support.mozilla.com/en-US/kb/Backing+up+your+information
Basically, you have to copy your profile from the old hdd to the new one.

Entire System Crashes With iTunes

I've acer with Windows 7 and entire system crashes while i use ITunes. Had latest update, but to be sure went back to download 64 bit. Still crashed so uninstalled in case other version partially installed and then re-installed 64 bit. Still crashes.

Sorry 'bout the delay, Eva.
Since the last time we spoke, iTunes 10.1.0.56 was released. The primary bug fix was for the CoreAudioToolbox.dll related "iTunes has stopped working" messages, but I figure it's probably worth a check with your bsod too.
I don't know if it shows up for people in their Apple Software Update (It didn't for me yesterday when I checked). So get it from the installer available from:
http://www.apple.com/itunes/download/
Any impact on the problem?

Unable to connect new ipod touch to the internet at home using wifi

Hi i've just brought ipod to touch to replace my broken classic...I AM UNABLE TO CONNECT TO WIFI!! help please!!

Does the iPod connect to other networks?
Does the iPod see the network?
Any error messages?
Do other devices now connect?
Did the iPod connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Flash player causes entire system crash with black screen

When watching a video on youtube, streaming on twitch or other things my entire system will crash with the following symptoms:
-Black Screen
-Intermittent stuttering sound
-Only fixable by a hard reboot (holding the power button). The reset button will NOT work. Video will NOT return, it will continue to loop this way until a hard reset.
Your Flash Version
11.9.900
Your browser name
Firefox
Your Operating System (OS)
Windows (Windows 7)
That information taken directly from Adobe's site. Using 64-bit, 8GB of RAM installed. ATI Radeon HD 6850 card. I have done a fresh Win 7 install a couple months ago and JUST NOW put flash back on here...now it's crashing. While times vary before the crash, I just watched a youtube video for less than 5 seconds before it happened.
Upon reboot, I get the "Windows was not shut down properly" message. No "Your system has recovered..." message, however. I've seen very few posts about this and none of the solutions help but this is REALLY pissing me off now. It happened to me before and the only fix was a fresh system install. I'm not doing that again.

Hi Mike,
I appreciate the reply. I can run the system for days, literally, doing other tasks such as music through iTunes, gaming through Steam, voice chatting on Ventrilo. The only time I will ever experience this issue will be the five minutes I watch a youtube video or watch a stream on Twitch..
My primary HD is a relatively new Intel SSD. I do have multiple other drives but they're used for storage of media (include aforementioned music).
I have been a youtuber and streamer for a while, and i'd like to try and record the phenominon, but i'll have to do so using an external camera since i'm not sure I can stop and save the recorded data. I'll have to do so I guess so I can give a better idea of the issue occuring.
Thanks again.

System crash with large PNG file

When I try to fullscreen Preview with a 6.8 MB PNG file, system crash definitely. After a short periode of white screen, I found myself at Login screen. All opened applications are quitted.

PS: It's OS X 10.9, I forgot to update infomation of my registered Mac.

System crash with KT6 Delta

Hi,
I am new around here, so excuse the noobness
Anyway, i hope you guys can help me out here a bit.
So here goes :
I just purchased a MSI KT6 Delta mobo to replace my old SYK7V Dragon Plus mobo which died on me 2 days ago. Initial installation was ok, with these device installed :
1) AMD Athlon XP 2000+
2) Winfast Geforce 4 Ti 4200 64MB
3) Creative Audigy Soundcard
4) 2 HDD, C: (120GB, Partition to 2 10GB and 100GB) E: (40GB)
5) 2 x 256MB PC2100 (Crucial RAM)
6) Logitech USB Optical Mouse
7) Aztech ADSL Modem (906EU)
The above configuration work flawlessly with all memory timing, AGP option turn to the max.
The problem arise when i added a new NIC from 3Com, the model of the NIC is 3C905C-TX-M, a 10/100Base-T card. The problem i am now facing is intermitten crash, the PC will just freeze in the middle of an operation, if it is in Windows, the mouse will stop moving. If it is in a game, the sound will skip and repeat a few tone, the screen will freeze also.
I have already updated the following drivers for these device :
1) VIA Inf driver, the latest downloadble from http://www.viaarena.com
2) Geforce driver, latest downloadble from nvidia.com
3) Audigy driver, latest downloadble from crative website.
4) 3Com Nic driver, latest downloadble from 3Com website.
I suspect it could be my Soundcard crashing with the nic somehow, as it i happen to see some skipping sound after i installed the nic. I have tried changing the PCI latency from 36 up to 128, still no help. I tried moving my soundcard to different PCI slot, and still the problem persist. Do any of you guys have this sort of problem? Any idea at all?

Quote
Originally posted by Wonkanoby
12v would be very low if you had a newer vga card in there that feed of 12v as well as the cpu but as the 4600 loads and runs of 3.3 and 5 v that should be ok
Mind elaborating a bit? I am not very well versed in PSU terminology. All those are just number to me. They know me, but alas i don't know them. All i know is a bigger PSU would almost always means a better PSU. I am planning to get either a Ati 9600XT or a 9800 Pro/XT in about 2-3 months time. If it is indeed that i need a newer PSU, perhaps you can tell me what to look out for, since i may as well be buying a new PSU.
Also... the PC seems to be running in a stable condition. No more hanging or crashes. I have also changed some setting in AGP, so as to speed up some game play, and still no crashes. Changed setting on BIOS for AGP is :
AGP mode : 4x
AGP aperture : 256MB (I usually set em at half my system ram)
Fast Write : Enabled
AGP Master 1 W/S Write : Enabled
AGP Master 1 W/S Read : Enabled
AGP Read Synch : Enabled
Gaming performance has been increase noticably, no more jerkiness.
Also, i have found out that my NIC has a shared IRQ with my OHCI compliant 1394 IEEE Host Controller, so i disabled that. I am not using it anyway, no loss there.
I will be trying memory tweaking tomorrow and let you guys know if there any crashes. Memory timing now in BIOS is still relatively conservative. I'll let it run for a day and see if there any problem before i mess with the memory timings.
Thanks to the kind people who help me. Appreciate all the help from you all.

Desktop system crashing with "Projects."

Upgraded to OS X (10.10.3), installed new "Photos" and all is well until I try to use "Projects." Consistently getting system crash reports. Puts me back at my desktop. Ideas?? (did not sign up for iCloud Library Photo support)

Quote from: tcourchaine on 14-September-11, 02:59:59
I can't provide you guys with anything, it's been with this guy for over a month. I've been running with 6GB for the past 2 years with no problems until I dusted out the inside of the case. Obviously it aggravated the problem I had two years ago.
i agree, maybe that wasn't the solution. it was after all 2 years ago and my memory was fuzzy. After a month and a half with this guy I got my comp back today. He reinstalled windows 7 and updated the BIOS. That helped out a lot, but it still froze twice, and reset it's self once with 6GB RAM in it. I took the 3rd RAM stick out, givign me 4GB, and noticed that my graphics drivers weren't updated yet, so maybe that was the reason for the crashes? I'm not so sure about that either though, because after I updated the GPU drivers it froze not too long after that. Maybe I needed to reboot for the drivers to take full effect? it didn't prompt me to restart, so I'm a little uncertain there.
I was thinking of trying it with 6GB RAM again, now that my graphics drivers are up to speed and the system has been rebooted.

System crashing with 6GB RAM, fine with 4GB

intel i7 920
6GB RAM
windows 7 home premium 64 bit
MSI x58 platinum motherboard
nvidia GTX 260 graphics
750w power supply
got my system being fixed by a professional, but we're stuck right now trying to find a solution to my problem. The system is fine with 4GB in any slot, but when the third stick is put in, the system crashes.
I'll go into some more detail of my troubles, this should help in the solution.
system was built out of Fry's Electronics 2 years ago. From the moment that I took it home I was having this problem. I thought it might be a faulty RAM stick at the time, so I had them replaced, but to no avail. The soluton if I remember was to reformat. Everything was fine for 2 years.
last month I opened up the system and cleaned the dust out of the inside. I removed the RAM and the CPU fan. Hooked everything back up and the system starts crashing and rebooting like crazy, and there's the problem again. It would crash while it's booting up, while it's sitting at the desk top, while I'm on the internet, any time it wanted to crash, it would do so. Not only that, but my BIOS and graphics drivers were suddenly out of date for some reason. I keep my drivers up to date, so this was weird to me.
I'll forward the ideas that you guys come up with to my guy, thanks ahead for your assistance.

Quote from: tcourchaine on 14-September-11, 02:59:59
I can't provide you guys with anything, it's been with this guy for over a month. I've been running with 6GB for the past 2 years with no problems until I dusted out the inside of the case. Obviously it aggravated the problem I had two years ago.
i agree, maybe that wasn't the solution. it was after all 2 years ago and my memory was fuzzy. After a month and a half with this guy I got my comp back today. He reinstalled windows 7 and updated the BIOS. That helped out a lot, but it still froze twice, and reset it's self once with 6GB RAM in it. I took the 3rd RAM stick out, givign me 4GB, and noticed that my graphics drivers weren't updated yet, so maybe that was the reason for the crashes? I'm not so sure about that either though, because after I updated the GPU drivers it froze not too long after that. Maybe I needed to reboot for the drivers to take full effect? it didn't prompt me to restart, so I'm a little uncertain there.
I was thinking of trying it with 6GB RAM again, now that my graphics drivers are up to speed and the system has been rebooted.

Unable to access CMS console after system crash and full restore

Our Crystal Reports server failed after a sudden power outage. When power was restored, the Windows 2003 server failed to boot. It had to be completely restored from backup. Now we have Business Objects Infoview (BOBJ 11.5) back up and running and Crystal Reports can be accessed by using the Enterprise login. Reports are running for the administrator, however, our real users are setup to login thru Windows AD, and we seem to be unable to contact the AD server over LDAP. The users get: Account Information Not Recognized: Active Directory Authentication failed to log you on. Please contact your system administrator to make sure you are a member of a valid mapped group and try again. This was working fine before the failure.
Also, we would normally pull up the central management server console to check the LDAP connection and the rest, but we get an error trying to pull up that web page:
WCA plugin error
Message:An exception has occurred in the admin plugin with message: Value not found
We are not using IBM Websphere, but we are using Tomcat.
We also see multiple entries in the server application log for the components of Business Objects: "Transport error: Communication failure"
I searched the support site for a few hours with no help there. Any help that can be thrown our way would be greatly appreciated.
Sincerely,
Peter Worrell
Technical Analyst
Southern Maryland Electric Cooperative
(301) 274-9284

Got this to work correctly after using https connect and not http -- https://localhost:1158/em works...

Unable to connect to wi fi, system crashes with 8.02 IPad 2 Wifi

Similar Messages

Maybe you are looking for