Unable to create a production plan and schedule on SAP B1

Hi,
I've been trying to figure out how to use SAP B1 to give me a production plan and schedule for quite some time now.... I have no problem in accessing my pending orders. There seems to be no option in my production tab to enter resource information! Would be great if you could possibly tell me how to figure this out.

Hi,
Without capturing the actual time of production orders, it is not possible to perform scheduling. You may create planned production order by based on theoretical time.
Only third party add-on fulfill your requirement.
Thanks & Regards,
Nagarajan

Similar Messages

Basic Data (PP-BD) - Production Planning and Control (PP) - SAP Library

To add a comment, please log in or register on the top of this page and choose Reply. Please write your comment in English.
You can also go back to the SAP help page.

To add a comment, please log in or register on the top of this page and choose Reply. Please write your comment in English.
You can also go back to the SAP help page.

Optimizer creating high production plan in few buckets

Hi,
Optimizer is creating high production plan in few buckets though there is less demand.
Findings
1. system in not preplanning to cover future demand.
2. there is one resource used by three different products for one product optimizer is doing excess planning while it is showing supply shortage for other products.
3.If I again take optimizer run for all the three products at all the location system is giving correct results (all receipt elements in line with the demand.
Now i need to understand the reasons why optimizer gave high production plan in last run ?
Regards
Abhi

1. system in not preplanning to cover future demand.
check storage cost and penalty cost , i think storage cost is more then penalty cost.
2. there is one resource used by three different products for one product optimizer is doing excess planning while it is showing supply shortage for other products.
if you run all three one by one it plan only first product on that particular resource, if you run all three same time system will plan according to the cost optimisation logic, that means it checks all cost and calculate which product needs to be manufacture on that resource and how much.
you can check the log of snp optimisation run in
/SAPAPO/SNPOPLOG - SNP Optimizer Log Data

Unable to create a webi report and 3 times it prompting for logon credentai

Hi,
We have a issue,
1.We are unable to create a webi report and 3 times it is prompting for logon credentials.
3.After giving the logon credentials 3 times then it is working fine.
4.We are using IIS Jakarta redirector .
5.We are able to view the webi documents successfully ,the issue occurs only when we create a new webi report.
Any one please help me on this issue.
Thank you in advance.
Environment u2013
BOXI3.1,
SSO,
IIS Jakarta redirector.
Thanks & Regards,
Powell.

bypass IIS and jakarta (go to tomcat directly with an enterprise account like administrator), does the issue still exist?
Regards,
Tim

All the planned and scheduled appointment can display in calendar view ?

1.I want to do some functions. For one day all the planned and scheduled appointments were displayed in the calendar view in backoffice . Whether SAP CRM standard provided this function? If yes, How to do?
2.Could Upper issue be achieved by per org.unit? if yes , how to do? thanks.

There is no way to prevent the user from inline editing an appointment.
Dmitry Streblechenko (MVP)
http://www.dimastr.com/redemption
Redemption - what the Outlook
Object Model should have been
Version 5.5 is now available!

MRP II in Production Planning and Control

Dear all,
I am studing SAP Production planning and control. What is Manufacturing Resource Planning (MRP II) and what is the role of MRP II in PPC? What all modules MRP II covers in ERP?
Thanks in advance
Jenisha

Hi,
MRP-II includes following SAP modules:
Materials Management
Production Processes
Quality Management
Product Costing
The end result of MRP that supports enhanced inventory tracking, limited product and project costing, quality management, and process order management. Despite its complexity, the system is both flexible and easy to use.

Is Yosemite compatible with Kodak production planning and workflow software like Prinergy Workflow?

Is the new OS 10.10 system compatible with Kodak production planning and workflow software? like Prinergy Workflow (incl. the Workshop and Workspace user interfaces as well as the ColorFlow and Preps Client) and Prinergy Evo Client,

Steven,
Thank you for your quick reply and information there in. The video is very nice too. Great angles and composition.
So I guess, I'm going to have swap my drive and re-install my OS when the machine arrives.
I'm not going to be able to capture directly to my desktop (due to poratability reasons). So is there I way in Premire CS3 to uncompress the HDV from the camera and store it in my HDD in uncompressed format? I don't mind having to do this extra step each time if the post production experience is going to be better.
I've heard a lot about Aspect HD from you and others here as well as other forums. I'm not very video savvy yet and don't understand a lot of the vocabulary used :). I've been to their website and don't get what their products are supposed to give me either (I guess their audience understands exactly what they are saying).
What I do get is it decompresses the MPEG 2 to saves it to yout HDD for editing purposes. However, I would have thought the Premier Pro CS3 would have that capability as part of the product, no?
I'd also like to use footage that is not HDV as well as photos/images (composits) but still retain the final cut to be HDV quality. Is this possible and if so, what does it do to the editing experience/performance?
Will I be able to output the final cut back to my camera's Mini DV tape (without having to buy Aspect HD)?

Shift wise planning and scheduling

Dear All,
Here we have a scenario in which we have to do shift wise planning and scheduling.
The shift is not fixed.
It can be 1 shift on particular day and it might be 2 shifts another day. They will plan for this many hours per day for future.
The scheduling should be done for this many hours which inturn is as many shifts. The working hours per day is not fixed as well. It totally depends on the requirement. So the planning and scheduling should happen based on hour basis and will be different for each day. I need your inputs for mapping this scenario.

Balaji,
You have not given any meaningful requirements, therefore it is impossible for me to make suggestions. What you have said so far implies total randomness. If all the events are random, there is no planning, only tracking.
Exactly what do you mean when you say 'planning'? Material planning in ERP does not consider shift sequences/timings/schedules. Capacity planning, where work schedules are managed, does consider shift type data, but only takes place only after the orders have been established.
Scheduling is done based on Work Centers. A work center can represent one or more machines, one or more people, or a combination of the two. Work centers can have shifts. The number of shifts can vary over time. The shifts can have various working schedules. The shift working schedules can vary over time.
I suggest that you describe a single specific scenario you would like to discuss. Perhaps then the forum can offer some suggestions.
Best Regards,
DB49

Were to find tutorials on create php product page and listing of products

does anyone know were to find tutorials on create php product page with more then one image and a listing of products. Only to show not to buy products its basical to show products and to list them. Its to be done in dreamweaver can anyone help me Im having problems finding something.
many thanks
Richard

What you're proposing to do is not particularly difficult, but nor is it something that can be taught in a quick online tutorial.
The first problem you face is that Dreamweaver's PHP server behaviors were removed from Dreamweaver CC because they use deprecated code. The code still works, but it's scheduled to be removed from PHP at some future stage. A lot of online tutorials (as well as published books) also use the deprecated code. So, unless you know what you're doing, you could easily end up learning to do something that will need to be completely redone when the deprecated code is finally removed from PHP.
How you handle this depends on your existing skills and budget. To the best of my knowledge, Adobe doesn't have immediate plans to replace the PHP server behaviors with updated code. If you don't have experience with PHP, you might want to consider buying commercial Dreamweaver extensions to handle this for you. DMXZone has some excellent PHP data extensions, but they're not cheap. I'm not sure whether WebAssist has updated its data extensions yet, but again, they're not cheap.
If you're willing to do some hand-coding, you might find my beginner PHP courses on lynda.com give you sufficient confidence to build the solution yourself. If you don't have a subscription to lynda.com, you can get 7 days unlimited access to all courses (disclosure: this is an affiliate link). If you prefer written material, my PHP Solutions, 2nd Edition, covers all the PHP/MySQL skills you'll need to accomplish this task. It was written four years ago, but avoids using the deprecated code.
Whichever route you decide to take, make sure the solution uses either MySQL Improved (MySQLi) or PDO. You'll be wasting your time trying to pursue a solution that uses PHP's original MySQL functions.
Good luck.

Unable to create workforce/capex Plan

All Experts,
We are unable to create Workforce plan. We have followed all the steps in guide, but still we are not able to deploy any plan which is valid for Plan type 'Workforce'.
We would appreciate, if anyone of you can indicate some specific pointer or steps which possibly are not clearly spellout in the documentation. As documentation mentioned that once you initialize the workforce all the necessary forms, rules, dimensions etc are made available. We can see the dimensions/default members, but to access the forms/rules, we need a plan in place which is not happenning.
Please help.
rgds
Pankaj

Dear friend,
Check what is the status of test cases in solar02.
When you upload scripts the status is draft or in process.
You should upload them as Released.
Check the status of document in the Test plan attributes which you are generating ....normally it is released.
so if you document status as released it wont be visible...just change the document status to rleaseed in solar02 then goto stwb_2 and regenerate it ........this wil work....
hope it helps.....Pls assign Pts.

Query created in production system and object changeability

Hi,
The production BW has the object changeability for query elements set to 'Changeable original'. Some queries which have been created in this system can be changed, others, which have also been created in the system, can not.
All queries are assigned to the development packate $TMP. None of them have been transported anywhere, nor have they been created somewhere else and transported into the system.
The system is BW 3.5, SP 17.
Has anyone got any idea what the problem could be?
Best regards,
Rita

Hi,
The object changeability in the system is set to 'Changeable Original' and I know where to switch from 'not changeable' to 'changeable original' to 'everything changeable'.
The normal development cycle sees reports being created in the development system and then being transported through to the production system. Here, they should not be changeable. However, users with the relevant authorisation should be able to either -
- create new copies of these reports and change them or
- create new ad-hoc reports and also change these
We have several of these reports on the production system. The object changeability is set to 'changeable original', as I mentioned. I would expect that all queries which have been created on this system and never transported (either in or out of the system) should be changeable, based on this setting. However, some are, some ar not. The error message when trying to change the 'non-changeable' ones is 'Operation falied! No error message available from the server'. If I make a copy of one of these queries, hoping to save is as an ad-hoc query and change it, the error message is 'query could not be saved due to a problem in transport'.
How come some can be changed, others can't? Is there anywhere I can check what the difference is between the changeable and non-changeable reports which have been created on the system?
Best regards,
Rita

Handling Planned order created from Demand planning and Sales order in MTO

Hi all
In MTO\ Repetitive we genrate Dependent requirement from demand planning (PIR) after running MRP which finally planned order created but on the other hand in short term we have Sales order which generate planned order after running MRP(In MTO), How we should handle planned order generated from Demand planning and the ones generated from sales order.(both after MRP Running).
Regards
Babak Bolourchi

Dear,
You can combine the planning strategy also main as 56 and second as 65 and in demand managment MD61 you have the option select requirement type.
Then while creating sales order use MTO strategy and take MRP run through MD50 and then MD02.
and if you want to assign the stock to sales order then you and do it through MB1b with 412 E movement type.
As per my knowledge, generally 56 strategy only takes Sales Order Stock into consideration.
Consider setting the Individual/Collective indicator to 2.
Mark those characteristics that should have a usage probability in demand management as Relevant for planning.
Hope clear to you.
Regards,
R.Brahmankar

How to create a Product Grouping and manage multiples?

How I can create a Product Grouping with 3 pieces of a product + 2 pieces of another product and ensure that customer can only order in multiples (6+4, 9+6, 12+8, etc.) and not for example 4+3?
Regards,
Francesco

Hi Madhavi,
You also need to assign the hierarchy to the application Product in Tcode: COMM_PRAPPLCAT.
There we have two settings,
1. Assign hierarchy to application.
   Make a new entry. Choose application Product and assign the hierarchy you
   have created.
2. Assign hierarchy to product type.
   In case you wish to have a separate hierarchy for each product type ( Material,
   Service, Warranty etc) than use this setting.
   Make new entry. Choose a product type and assign hierarchy to it.
Wish the information is useful. If it helps, do reward with points.
Regards,
Shalini Chauhan

Production planning and controlling (pp) related kpi's

Hi, friends
I am new to pp module and I am in search for pp related kpi's. help to find kpi's, post me kpi's friends.
thank you

Prathap,
I can give you some high level idea from which you can develop required dashboards for your requirements.
1.Number of goods being produced without error
2.Delays caused by machine downtown
3.Errors caused by workers
4.View Summation statistics of company profits
5.Find out who are the major customers
6.Review safety procedures by measuring worker injuries
7.Quality of products being made
8.Products produce and profits per worker
9.Delays caused by each product manufacturing process
10.Cost to sales ratio of each product
11.Worker injuries and costs to production
12.Top retail distributors and product sell-through rates
13.Revenue by sales representative
14.Revenue by product or product group sold
15.Delays caused by shipping problems
16.Order cancellations or returns
Manufacturing Dashboard 1 - For selected date Range With Target, Current Inventory, Current Open orders, Waste etc
Manufacturing Dashboard 2 – Orders by Location wise say at different operation stages with Quantities and Values
Manufacturing Dashboard 3 – Production schedule and their current status
Manufacturing Dashboard 4 – Mfg. Revenue and Mfg. Operating profit
Please note above are generic KPIs requirement for any manufacturing industry.
Br
KK

Production planning and control

Dear Experts,
I have some doubt in my mind can you all help me out to resolve my issue.
i am in production dept of our company and our company have 3rd party location to whom our purchase dept arrange the
RM,PM and Labels. We get the material packed through this 3rd party and provide them packing charges on per units basis and
and afterward packing they offer the FG to our QC person for checking and after checking our QC person give the FG UD
if FG was found ok.
Generally our 3rd party location make the production order, release it, issue it, GR it and do confirmation. That is overall
SAP related activities are been handled by our 3rd party location.
So kindly confirm me that how can we control our 3rd party production activites from our end.
What is the correct system, i mean who should release the production order we or our 3rd party, who should issue the material we or 3rd party,
who should GR and do confirmation we or 3rd party.
Please provide me the best solution for controlling this 3rd party location.
Thanks in advance have a nice day.

Hi,
which kind of production U have? MTO or MTS?
I think is better U leave at the 3rd party the autonomy to do all SAP actions. U can monitor in any case what is going on there via COHV, COGI and so on. In any case I would suggest that U release the Production order and then the 3rd can proceed, in this way U can plan the activity to them till the GR on the Production Order. Then later U can post the godd issue and send a shipping notification to the 3rd party.
I hope it helps,
Cheers,
Mik

Unable to create a production plan and schedule on SAP B1

Similar Messages

Maybe you are looking for