Unable to create or update the Custom Data Provider WIS 10853

Hi,
I have created the universe in designer then I created QAAWS. In the web intelligence tool, clicked for new document and then chosen web services under other data sources. After giving webservices detailed, I encountered the following error.
Error from Personal Datasource : Unable to create or update the Custom Data Provider: invalid information retrieved while trying to get the structure. (CDS 105109). (WIS 10853)
Can anyone help abt this problem? I wud very thankful for them.

Hi,
Can you post the wsdl URL. It would be of great help if we could have a look at the wsdl schema. Not all schemas are supported at the moment and hence the error. You can have a look at the limitations section in the documentation guide.
Regards
Rahul

Similar Messages

Unable to create or update the Excel Personal data provider in Web Rich

Hi All,
Iam getting the below error message ,when iam using Excel as personal data provider in WEBI Rich Client.
"Unable to create or update the Excel Personal data provider in Web Rich Client Cannot open the workbook WIS:10872"
Please suggest a solution ,it helps a lot..
Regards
Mahesh

Hi,
Was this issue resolved? I see this post has been marked answered but there wasn't any information on what it took to resolve the issue.
We have our CMS and processing servers on Linux while our Scheduling servers are on Windows. The WEBI reports with external data providers fail to run on Infoview/ scheduler.
We were told this is addressed in FP 3.6 but that is not the case. We installed FP 3.6 but still continue to see these errors. It required us to manually deploy the ExtensionFactoryService package for enabling the refresh of such reports on infoview/schedulers. It also involves placing of the file used [.xls/.txt] on the linux server on the PersonalDPFiles directory.
No luck so far!!!
Any help would be greatly appreciated!
Thanks
Avinash

No change log is created when updating the customer master using LSMW

Hi Gurus,
I am a bit confused on why no change log is created when I use the LSMW to update the customer master. What I update is the customer partner of the customers. For example I have a sold-to 1000 then a customer representative (Z3) 50001, now when I use the LSMW to change the customer representative to 50002 it is correctly updated however no change log is found if you check for the changes on that specific customer. This is a bother for me since I want to send all the customer changes through IDOC and the processing needs to access the change log.
Thank you.

Hello,
What process are you using object, BAPI, etc.
Regards
Waza

Custom Data Provider Not Registered in Report Server (Sql Server 2012)

We have a simple test report project set up and can preview the reports with no errors or problems from the designer. We can deploy the report project, but when trying to view the reports from the browser, we get the following error:
An error as occurred during report processing, (rsProcessingAborted)
An attempt has been made to use a data extension 'LiMeDAS' that is either not registered for this report server or is not supported in this edition of Reporting Services. (rsDataExtensionNotFound)
I have followed this article that explained how to register a data provider extension:
https://msdn.microsoft.com/en-ca/library/bb326409.aspx
I have placed the assemblies in:
C:\Program Files\Microsoft SQL Server\MSRS11.LIMEDAS\Reporting Services\ReportServer\bin
Added the following line to the rsreportserver config file (inside the <extensions><data> tags)
<Extension Name="LiMeDAS" Type="Limedas.Data.Provider.LimedasConnection,Limedas.Data.Provider"/>
and finally added the following to the rssrvpolicy config file (inside the top level CodeGroup tag):
<CodeGroup class="UnionCodeGroup" version="1" PermissionSetName="FullTrust" Name="LiMeDASDataProviderCodeGroup" Description="Grants permission to the LiMeDAS data processing extension for reporting services.">
<IMembershipCondition class="UrlMembershipCondition" version="1" Url="C:\Program Files\Microsoft SQL Server\MSRS11.LIMEDAS\Reporting Services\ReportServer\bin\Limedas.Data.Provider.dll"
/>
</CodeGroup>
We have the data extension set up perfectly for the designer, because I can see it as a type of connection and the preview works in the designer.
But, for some reason it does not work in the server. They were set up the same way, but the server will not work. From the report manager page, when we try to add a data source, the only type option is Sql Server, none of the other extensions mentioned in
the config file. Does anyone know what else could cause this issue?

Hi Justin,
According to the error message and the issue can be caused by the edition of your SSRS is not support for the custom data provider. For example the express edition have limitation support on this:
Features Supported by the Editions of SQL Server 2012 .
If your edition is the supportted edition and the issue can be caused by the custom data provider do not necessarily support all the functionality supplied by Reporting Services data processing extensions. In addition, some OLE DB data providers and ODBC
drivers can be used to author and preview reports, but are not designed to support reports published on a report server. For example, the Microsoft OLE DB Provider for Jet is not supported on the report server. For more information, see
Data Processing Extensions and .NET Framework Data Providers (SSRS).
If you are running on a 32-bit platform, the data provider must be compiled for a 32-bit platform. If you are running on a 64-bit platform, the data provider must be compiled for the 64-bit platform. You cannot use a 32-bit data provider wrapped with 64-bit
interfaces on a 64 bit platform.
More details information:Data Sources Supported by Reporting Services (SSRS)
Similar thread for your reference：
ERROR: An attempt has been made to use a data extension 'SQL' that is not registered for
this report server.
Error when viewing SSRS report with SQL Azure as data source
If you still have any problem, please feel free to ask.
Regards
Vicky Liu
Vicky Liu
TechNet Community Support

I want to update the Custom table using the data available in ITAB.

Hi,
I want to updaste the Custom Table which is created by me (Ztable) using the data available in itab.(which i got from defferent standard tables)
I want to update the custom table using the itab data How is it possible?
Is any possible by using Modify ?
DPK.

example here
modifying datbase table useing internal table
advises before updating this datbase table plz lock that table to avoid incosistency
write the logic for modifying
Modify the database table as per new dunning procedure
MODIFY fkkvkp FROM TABLE lt_fkkvkp .
and finally unlock the table
example
*To lock table for further operations
constants: lc_tabname TYPE rstable-tabname VALUE 'FKKVKP' . "FKKVKP
CALL FUNCTION 'ENQUEUE_E_TABLE'
EXPORTING
tabname = lc_tabname
EXCEPTIONS
foreign_lock = 1
system_failure = 2
OTHERS = 3.
IF sy-subrc EQ 0.
To fetch all the contract accounts for customers of the segment
Households/SME.
PERFORM fetch_contract_accounts using lc_tabname .
ENDIF. " IF sy-subrc EQ 0.
*wrote the logic
Modify the database table as per new dunning procedure from internal table
MODIFY fkkvkp FROM TABLE lt_fkkvkp .
*unlock the tbale
CALL FUNCTION 'DEQUEUE_E_TABLE'
EXPORTING
TABNAME = uc_tabname .

XD02 transaction to change the customer data for updating KNA1 table?

Hi all,
How can we use XD02 transaction to change the customer data for updating KNA1 table?
Give the steps.
Thanks in advance
rk

Hi KR,
Why don't u use BDC to run XD02.
With Regards,
Zafar Ali

Share the customed data types between sequence files

Is there any way to share the customed data type , ex. containter, between the sequence files?
I created some containters, ex, datatype1 in the File1.seq. The other
file File2.seq calls a subsequence which pass the datatype1 as
parameter. But now I have to copy the datatype1in the custom data type
section in the File2.seq. I didn't find the way in the teststand , when
I want to insert a container which is from another file.
The disdavantage of this way is , if the data type is changed, you have to change the data type in both files.
Thanks
Sundog

You can add the data type to the station globals. Then they would be updated for each sequence that uses them.
Open the stations globals and change the view to Global Types. Add your type there.
Message Edited by paulmw on 01-10-2007 01:01 PM
* I noticed that I can't find the type when tring to create a local varable using the above steps, so it looks like this won't exactly work.
Message Edited by paulmw on 01-10-2007 01:06 PM

Unable to create a QUEUE in custom schema

Hi,
I was able to create a Type & queue table in custom schema, but using them was unable to create a QUEUE in custom schema
I'm using the following piece
DBMS_AQADM.CREATE_QUEUE(queue_name => 'XXXXXX_QUEUE',
queue_table => 'XXXXXX_QUEUE_TABLE'
Whereas in APPS schema I'm able to create the same queue.
Pls advice ...

Hi,
The only reason is that, we create all the custom objects (owner as custom schema), and a synonym in APPS.
I did not get any error, but the queue, is not getting created
Following are the scripts used
CREATE OR REPLACE TYPE 'XXXXXX_QUEUE_TYPE
AS OBJECT (TYPE VARCHAR2(15));
BEGIN
DBMS_AQADM.CREATE_QUEUE_TABLE (queue_table => 'XXXXXX_QUEUE_TABLE',
queue_payload_type => 'XXXXXX_QUEUE_TYPE'
END;
BEGIN
DBMS_AQADM.CREATE_QUEUE(queue_name => 'XXXXXX_QUEUE',
queue_table => 'XXXXXX_QUEUE_TABLE'
END;
BEGIN
DBMS_AQADM.START_QUEUE(queue_name => 'XXXXXX_QUEUE'
END;
Thanks.....

How to update the Customer field value of PO Item under the Delivery Address Tab?

Hi Friends,
i tried to update the Customer field Using Bapi_PO_change.I passed the PO Order no,POADDRDELIVERY data with Item no,Adrees no,Customer no.But i am getting no data changed message from return table.I attached the screen shots.So please suggest me the helpful information for resoving this issue.
Thanks,
Dinesh

Thank you friends,
My Problem was resolved.In my case i have passed the customer value in BAPI_PO_CHANGE POITEM Table with updated customer value.
Thanks,
Dinesh

Updation in customer data in ME52n

Hi experts,
can any one give me solution about updation of customer data in ME53n from custom transactions.
thank you
regards
vijay

If you are using custom field and custom table then directly you have to write update statement otherwise if you have extended any structure through user exit it will take care automatically but you have to assign the values to that particular field in standard structure.

Any BAPI or FM to use to update the Customer Address with change log?

Hi, does anyone have used any BAPI or FM that will update the customer address (Central Address management fields) and the change will be logged in the change history of customer master? I have tried several FM that can update the fields but none of the change will show up in the change history of the customer master.
So far, I have tried the following FM:
ADDR_MAINTAIN_COMPLETE
ADDR_UPDATE
BDC is not acceptable due to high volume of data. However, the change log is also required.
Please share any advice.
Thank you,

Hi Minami,
for chenge address use FM : BAPI_BUPA_ADDRESS_CHANGE       (SAP BP, BAPI: Change Address)
otherwise check with below FM ,for address related information
BAPI_BUPA_ADDRESSES_GET              SAP BP, BAPI: Determine All Addresses
BAPI_BUPA_ADDRESS_ADD                   SAP BP, BAPI: Add Address
BAPI_BUPA_ADDRESS_CHANGE                 SAP BP, BAPI: Change Address
BAPI_BUPA_ADDRESS_GETDETAIL             SAP BP, BAPI: Read Address
BAPI_BUPA_ADDRESS_GET_NUMBERS    SAP BP, BAPI: Read Address Numbers
BAPI_BUPA_ADDRESS_REMOVE                    SAP BP, BAPI: Delete Address
Regards,
Tutun

Could I update the schedule date by the add-in software OpenPS?

I create the R/3 PS WBS using the add-in software OpenPS from MS Project at the beginning. But according to our company working business , I can't update the WBS schedule date by updating the activity schedule date under the WBS, i can only update the WBS schedule. (so I have done some set-up and set the duration of every activity is zero). I hope I can update the schedule date by the add-in software OpenPS from MS Project during the R/3 system is online running(NOT the beginning).
We know the adjustment of schedule in MS Project is very easy and convinent. So if I adjust the schedule in MS Project, and I update the schedule in R/3 PS by the add-in software, then everything will be good.
But maybe this operation will have a bad effect on the running R/3 system.
Please give me some advice and practice experience.

Hi Sanjay,
You really MUST try things BEFORE saying that they are wrong.
The CDHDR table DOES store the creation date AND time because the system treats the creation as a Change.
If you simply enter ME51N as the transaction code in SE16N for table CDHDR you will see that it is YOU that is wrong.
Please do try to verify your comments before challenging Seema in this way, who has provided a good and workable solution.
Steve B

Is a new SI_ID created every time the InfoObject data changes in the CMS?

I'm trying to create a process that records the FRS file path and file name of every InfoObject created in the CMS and associate it with a timestamp and a friendly report name.
As this process runs the big question is does it need to crawl the entire CMS every time looking for changes in previously created InfoObjects or is a new SI_ID, and by extension new file path and name, created every time the InfoObject data changes in the CMS?
I'm hoping it is the latter. Obviously the actual SI_ID creation behavior changes the code quite a bit. Any help would be appreciated.
Thanks.

Just want to make sure we're on the same page here.
If a User takes an infoObject and updates the file associated with an infoObject, then neither the SI_ID or the SI_CUID will change. Any changes to properties of the infoObject won't trigger changes to its SI_ID or SI_CUID value.
However, SI_UPDATE_TS will change with modification of the InfoObject:
http://devlibrary.businessobjects.com/businessobjectsxir2/en/en/BOE_SDK/boesdk_dotNet_doc/doc/boesdk_net_doc/html/QueryLanguageReference177.html
So that may be what you're interested in. Note that SI_UPDATE_TS is an indexed property in the CMS repository database, so a query that filters on SI_UPDATE_TS (such as SI_UPDATE_TS > '2006.02.02') wouldn't be too slow.
One danger to your scheme - it'll pick up updates to the InfoObject, but not to related InfoObjects (such as Web Intelligence - Universe relationships). Working out all the necessary relationships may be daunting.
Sincerely,
Ted Ueda

How to regularly update the Master data/Text/ Hierarchy for BW DEV?- Urgent

Hi Experts,
Can anyone help me to understand how to update the Master data/Text/ Hierarchy regularly for BW DEV.
Since all the new query developments are taking place in DEV, users are not finding the latest Masterdata/ Texts /Hierarchy in the DEV system.
I have searched in SDN and got a document "HOW TO DOWNLOAD A HIERARCHY TO A FLAT FILE". However, is there any other way to upload the master data automatically on periodical basis.
Please help urgently.
Advance Thanks,
BW USA

If you want to extract master data from PRD in order to load in DEV, i suggest to do this (its a tricky thing):
For example, you want to download 0EMPLOYEE
1-In PRD, transaction RSD1
2-Enter 0EMPLOYEE
3-Copy the Master table for 0EMPLOYEE (/BI0/MEMPLOYEE)
4-transaction SE16
5-Enter the table name /BI0/MEMPLOYEE
6-in the selection screen, go to "Options" Menu and select "User parameters", and now select "Standard List SE16"
7-Execute
8-Now its show's up the 0employee data, go to "System" menu - List - Save - Local File
9-After you have the flat file, only rest create Infopackae in DEV Env. and load it from the flat file.
Asigns points if useful.
Regards

Popup screen it is updating the master data

hi all,
when I open sales order and open header information part or Partner tab and if I am double clicking on payer I get an popup screen in this I can see the address details but if I am changing the Name of payer in that popup screen it is updating the master data. I am not able to get how It is happening.
Is there any problem with the customer creation ? or is it an SAP bug .
Need you advice .

Hi mayank,
Option of changing the data in the customer details at the partnertab is a standard functionality.
But that will be limited to that particular document only.
It shouldn't impact the customer master. Kindly check again.
Regards
Gurunadh

Unable to create or update the Custom Data Provider WIS 10853

Similar Messages

Maybe you are looking for