Unable to create planning application in workspace

Hi,
i am new to system 9,and have recently installed it on my system,when i try to create a new application using the link below:
http://localhost:8300/HypeironPlanning/Appwizard.jsp
I get the below error
user must have the planning Application creator and dimension editor roles to manage applications
Any help is appreciated.

Hi,
You need to assign the user the Roles in Hyperion Shared Services,
When you provision a user > Hyperion Shared Services > Global Roles > Application Creator >
Cheers
John

Similar Messages

Unable to create Planning Application

Hi All,
I reconfigured the Hyperion Planning 11.1.2.
Then I Log-In to Workspace using [http://localhost:19000/workspace/index.jsp] the URL
After page load, I get an error as
"The startup document specified does not exist in the repository. Select a new startup document on the General preferences tab."
Then I click ok to proceed.
After that i get an error as
"An error occurred processing the result from the server".
Then I click ok to proceed.
"Could not find a Hyperion Reporting and Analysis server running on localhost at port 6800. Please verify your server connect string and confirm that the server is up."
Then I click ok to proceed.
After that I'm Unable to create Planning Application.
But how to rectify all the errors mentioned above.
Kindly guide me.
Thanks And Regards
ChiDam

Hi John,
Thanks for your reply. I tried to Log-In to the hyperion Planning through [http://localhost:8300/HyperionPlanning/AppWizard.jsp]. Page loaded sucessfully.
I'm able to create a planning application.Thanks John.
But I login to Workspace [http://localhost:19000/workspace/index.jsp]
After page load, I get an error as
"The startup document specified does not exist in the repository. Select a new startup document on the General preferences tab."
Then I click ok to proceed.
After that i get an error as
"An error occurred processing the result from the server".
Then I click ok to proceed.
"Could not find a Hyperion Reporting and Analysis server running on localhost at port 6800. Please verify your server connect string and confirm that the server is up."
Then I click ok to proceed.
After that I'm Unable to create Planning Application.
But how to rectify all the errors mentioned above.
Kindly guide me.
Thanks And Regards
ChiDam

Unable to open Planning application through Workspace

Hi All,
I have Installed and configured the Hyperion products in the following Order
->Foundation services
->Essbase server
->Essbase Administration service
->Planning
->Reporting and Analysis
->Workspace
We know that workspace is a single user interface.
After configuring, I tried to open the Planning Application through workspace but I could not able to find "*Classic Application Administration*" under Administer option of Navigate menu Kindly guide me.
Thanks and Regards
chiDam

You don't need to start downloading weblogic.
Usually the issue is that either the web server has not been configured (this is not weblogic) or the permissions are not correct in shared services e.g. the hss roles of application creator, dimension editor.
You can always try going to create a planning application directly first http://<planningmachine>:8300/HyperionPlanning/AppWizard.jsp
Cheers
John
http://john-goodwin.blogspot.com/

Error while creating planning application through workspace

Hi,
I am getting the following error when i am trying to create the classic planning application through workspace.
Invalid or could not find module configuration.
Required application module HyperionPlanning.AppWizard is not configured. Please contact your administrator.
Communication Error.
http://localhost:45000/HyperionPlanning/conf/HspJSConfig.xml?LOCALE_LANGUAGE=en
Please suggest me how to resolve this error. Also please share the order in which services to start.
Thanks in Advance,
Naveen Suram

Hi John,
I am facing the same issue. Reconfiguring Web server did not help. It is still not coming up and the link to planning that you have shared here is also not working. I am doing it on RHEL and facing issue with the same. Any help will be greatly appreciated. I checked the mod_jk log which has the following:
*[Tue Jan 31 20:17:01 2012] [info] ajp_send_request::jk_ajp_common.c (1186): Error connecting to the Tomcat process.*
*[Tue Jan 31 20:17:01 2012] [info] ajp_service::jk_ajp_common.c (1665): Sending request to tomcat failed, recoverable operation attempt=2*
*[Tue Jan 31 20:17:01 2012] [error] ajp_service::jk_ajp_common.c (1673): Error connecting to tomcat. Tomcat is probably not started or is listening on the wrong port. worker=Workspace failed errno = 111*
*[Tue Jan 31 20:17:01 2012] [info] jk_handler::mod_jk.c (1875): Service error=0 for worker=Workspace*
I don't know what to do now.
Thanks in advance.
Saurabh

Unable to Create Planning Application through Planning AppWizard

Hi All,
I have a problem in creating the planning app through app wizard(at port 8300)
Logged into the Planning App Wizard(could able to do this successfully),
Clicked on Create Application and its showing up the error message like
" The page can't be processed check log for details"
I captured the error logs through SysErrFile and SysOutFile.
Could some one please help me to fix this.
Below is the message from log:
org.apache.catalina.core.StandardHost start
INFO: XML validation disabled
org.apache.catalina.core.StandardHost getDeployer
INFO: Create Host deployer for direct deployment ( non-jmx )
org.apache.catalina.core.StandardHostDeployer install
INFO: Installing web application at context path /HyperionPlanning from URL file:E:\Hyperion\deployments\Tomcat5\HyperionPlanning\webapps\HyperionPlanning
Creating rebind thread to RMI
Query Failed: SQL_SYSDB_DELETE_EXPIRED_EXTERNAL_ACTIONS:[100]
java.sql.SQLException: [Hyperion][Oracle JDBC Driver][Oracle]ORA-00932: inconsistent datatypes: expected INTERVAL got NUMBER
     at hyperion.jdbc.base.BaseExceptions.createException(Unknown Source)
     at hyperion.jdbc.base.BaseExceptions.getException(Unknown Source)
     at hyperion.jdbc.oracle.OracleImplStatement.execute(Unknown Source)
     at hyperion.jdbc.base.BaseStatement.commonExecute(Unknown Source)
     at hyperion.jdbc.base.BaseStatement.executeUpdateInternal(Unknown Source)
     at hyperion.jdbc.base.BasePreparedStatement.executeUpdate(Unknown Source)
     at com.hyperion.planning.sql.HspSQLImpl.executeUpdate(Unknown Source)
     at com.hyperion.planning.sql.HspSQLImpl.executeUpdate(Unknown Source)
     at com.hyperion.planning.event.HspSysExtChangeHandler.actionPoller(Unknown Source)
     at com.hyperion.planning.event.HspSysExtChangeHandler.<init>(Unknown Source)
     at com.hyperion.planning.HspJSHomeImpl.<init>(Unknown Source)
     at com.hyperion.planning.HspJSHomeImpl.getStaticHome(Unknown Source)
     at com.hyperion.planning.HspJSHomeImpl.getStaticHome(Unknown Source)
     at com.hyperion.planning.HspServletContextListener.contextInitialized(Unknown Source)
     at org.apache.catalina.core.StandardContext.listenerStart(StandardContext.java:3827)
     at org.apache.catalina.core.StandardContext.start(StandardContext.java:4343)
     at org.apache.catalina.core.ContainerBase.addChildInternal(ContainerBase.java:823)
     at org.apache.catalina.core.ContainerBase.addChild(ContainerBase.java:807)
     at org.apache.catalina.core.StandardHost.addChild(StandardHost.java:595)
     at org.apache.catalina.core.StandardHostDeployer.install(StandardHostDeployer.java:277)
     at org.apache.catalina.core.StandardHost.install(StandardHost.java:832)
     at org.apache.catalina.startup.HostConfig.deployDirectories(HostConfig.java:701)
     at org.apache.catalina.startup.HostConfig.deployApps(HostConfig.java:432)
     at org.apache.catalina.startup.HostConfig.start(HostConfig.java:983)
     at org.apache.catalina.startup.HostConfig.lifecycleEvent(HostConfig.java:349)
     at org.apache.catalina.util.LifecycleSupport.fireLifecycleEvent(LifecycleSupport.java:119)
     at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1091)
     at org.apache.catalina.core.StandardHost.start(StandardHost.java:789)
     at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1083)
     at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:478)
     at org.apache.catalina.core.StandardService.start(StandardService.java:480)
     at org.apache.catalina.core.StandardServer.start(StandardServer.java:2313)
     at org.apache.catalina.startup.Catalina.start(Catalina.java:556)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:287)
     at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:425)
Error encountered with Database connection, recreating connections.
Nested Exception: java.sql.SQLException: [Hyperion][Oracle JDBC Driver][Oracle]ORA-00932: inconsistent datatypes: expected INTERVAL got NUMBER
Please Help it.
Thanks
kr

Are you using a previously configured datasource to create the application?
Perhaps, try with a new data source..
Regards,
Sayantan

Unable to create Planning app

Gurus,
I have been unable to create planning app.
I created the datasource successfully in workspace.
Then when I try to create the app (so that I can dump the files from different environment), I get the message... APPLICATION ALREADY EXISTS IN ESSBASE.
I have tried to delete the application in Essbase and again when I try to create it, it again gives the same message. Do I need to do anything to avoid it.
Thanks

John,
Yes this is the environment.
Finally, the environment is up and running.
I have some planning apps and some essbase apps. I have already copied the essbase apps and loaded data, and Agged them.
Now I am trying to work with the planning applications.
I created the datasource.
and now I am trying to create the planing apps so that i could dump or do LCM to migrate, however, when I try to create the apps, it gives me the error message saying that the apps already exist in essbase.
One thing I need to tell you is that the server had essbase apps before. However, we uninstalled EPM cleared everything out and then installed brand new EPM on it.
Thanks for your guidance.

Unable to see planning application and dimension menus under navigate tab

Dears
Unable to see planning application and dimension menus under navigate tab in EPM 11.1.1.1 workspace.
Is there any configuration lost?
All EPM service have already started.
Thx
Hector

I also don't see the menu under "Consolidation" or "Planning" applications. I can naviaget to these applications from Navigate -> Application ->Consolidation or Planning and I see a box with up arrow and down arrow. If I keep my cursor between these two boxes, or the boundary, sometime I could start my applications in these two modules. I checked context.properties in \Hyperion\home\deployment\Tomcat5\workspace\webapps\workspace\conf folder.
#Appended properties
#Sat Jan 17 14:14:43 EST 2009
Reports=Y
HFM=Y
HPSU=Y
HP=Y
HPS=Y
Analyzer=Y
BPMA=Y
ChangeManagement=Y
Subcontext.properties file is as follows:
Analyzer=WebAnalysis
Reports=hr
HMB=metrics
HPS=HPSWebReports
HFM=hfm
HP=HyperionPlanning
BPMA=awb
HFM-version=9.3.1
HP-version=9.3.1
HPS-version=9.3.1
HMB-version=9.3.1
BPMA-version=9.3.1
# Parameters for all contexts
#KeepAliveInterval=10
#SessionTimeout=30
#logon=bpm.logon
#startup=cds.mode
I also removed # character in the last four lines but I cannot see my aplications under "Consolidation" or "Planning.
This is in Hyperion 9.3.1 environment all my websites are working. Workspace, Shared Services etc. I checked all my servies and they are working ok.
http://lewisxphub:19000/workspace/index.jsp
Any Ideas?
Thanks
Jay
Edited by: Keerthi on Jan 29, 2009 4:31 AM

Unable to see Planning application under calculation Manager

Hello All,
I created a Planning application in workspace and choose the Sahred Service Project as APS server.Now I want to create business rules.For that when I m lunching Calculation Manager from workspace, I m not able to see the appliaction that I had created before ,under Planning option of Calculation Manager.
Thanks.......

I think you created a classic planning applications. Calc manager will not recognize classic planning applications in version 11.1.1.2 and prior.
You need to create a planning applications via EPMA and then you will see this in calc manager. If you have already opened calc manager, right click on the Planning node and do a refresh to synchronize the applications from EPMA.
Hope this helps.
~SM

Creating Planning Application on 9.3.1

I'm new to Hyperion Planning and I've trouble creating an application on Workspace.
I want to create a multi-currencies application. Before I creating the application on Workspace, I've created a database in SQL server and instance, created datasource via Configuration Utility. After creating the SQL database and datasource, I went to Workspace->Navigate->Administer->Classic Application Administration-> Planning Administration. I entered required information and selected corresponding datasource and instance, etc. When I was done, I clicked "finish". However, after a few seconds, an error occurred. The error message is "an error occurred while processing this page. Check the log for more details." I looked through the log files in Hyperion folder. I couldn't find a log which describes Hyperion Planning activities. The login ID I used has "application creation" right in Shared Services.
Does anyone come across similar issue? What are the possible resolution to the problem? What log file does the error message refer to?
Appreciated if someone could shred some light on this.
Thanks in advanced.

Hi,
look if the cubes exist in essbase. If they exist delete them and retry to deploy the application.
Is the User in Shared Services Native Directory or is it external authenticated? I had to use one from Native Directory to do that.
bye Kevin

Creating planning application

hi,
Whats the difference in creating planning application via EPMA and classic planning application in version 11?
Thanks!

Hi,
Are you asking the question what is the difference between EPMA and a classic application.
EPMA is a seperate component to planning and basically it is a GUI for managing hierarchies before pushing it into the planning application.
EPMA can manage metadata for other areas such as HFM or essbase.
Classic planning you can maintain the metadata directory in planning web or you can use other tools such as ODI, DIM or the outline loader.
All the other elements of planning are managed in the same way.
If you want to find out in more detail I suggest having a read of the planning admin guide which can be found here
Cheers
John
http://john-goodwin.blogspot.com/

How to reference a Planning Application in Workspace

Hello,
I've developped several Planning applications.
But when I open workspace / Applications / Planning, (with an admin user)
I only see one Planning application. So I want to know how to reference a Planning application in Workspace ??
Thanks for your help
Best regards

Some details :
My Planning applications seems to works correctly. Essbase is Okay. Shared services is okay too but the Workspace is out (and with it Financial Reporting Studio).
Before that problem, In the configurator, I've deleted all Planning clusters except one (Default). I've selected Re-associate Clusters and Applications and I've successfully re-Associate all Planning Application to Default Cluster. Then I've Activated Cluster Default.
But Anyway, Since I've deleted Planning Clusters my Workspace doesn't work anymore.
I've a doubt: I've tried to redeploy Workspace (Configurator / Hyperion Foundation / Workspace / Deploy to Application Server and Configure web Server.
It doesn't work because it says that Workspace already exists :p.
Anyway I'm surprised about something : To access Workspace we use the 19000 port but In Configuration we I try to deploy it I see it is on the 45000 port. If I click on advanced / Setup a little window open "Set up Logical Address". And it is writtend Edit Default Cluster : gl-dev-budget : 45000 meanwhile when (still in Configurator) I open Planning / Manage Planning Cluster the server port is 8300 ??
Is someone can helps me ?
Thanks
Best regards

Unable to Access New Planning Application via Workspace

Hi all
i have installed a new Planning server into the existing platform (there is no hardware load balancing so is seen as a single instance of planning) however i am using the existing workspace and HSS.
I have successfully installed and configured the new Essbase and Planning Products and registered against shared services. The issue i have is that i cannot get the new Planning application to be viewable via workspace. I get Application is invalid.!!.
The original (Existing) Planning on server 1 is set to 'Active Instance' in the product registration and these apps can be viewed by workspace etc.
I have created Planning on Server 2 and have created a new instance, but not set the 'Active instance' in the product registration!!!, i have also registered this as the web host tier on the Server 2 not the Server1.
If i use the direct planning URL's for either Planning Server 1 or Planning Server 2 i see the planning applications that are on each server!!
Can anyone tell me what configuration i have missed out! If it helps the Planning Server 1 has its own Shared Services Project and Planning Server 2 has its own Shared Services project.
I have restarted services on Server2 BUT not Server 1 as i am not allowed an outage until the end of the month!!.

Hi,
Did you create a new Planning app in your new environment? Can you access this new app as a test?
You will need to asociated your app with an active instance and datasource.
In the workspace, when you go to Navigate - Applications - Planning, do you see your Planning app or is it not there at all?
Did you check the logs for any errors? Are you sure the user you are logging on to the Workspace as has been provisioned for that planning app?
When you configured BI+ did you make sure you ticked Planning?
Seb
www.taysols.com.au

Unable to delete Planning application created through EPMA

Hi friends,
Iam unable to delete the planning application created through EPMA.Tried logging in as admin still its not allowing.
I tried in application view-> right click and delete.it will ask for all related info and when I say 'delete', the status is aborted.
Can anyone tell whether we can delete an application created through EPMA. or is there a way to delete in backend.
Regards.

Hi,
You could try and find more information from the logs, first change the level of logging for EPMA, it is set as standard to INFO and it is probably best changed to DEBUG.
To do this
Stop EPMA
Go to the deployed Web application directory.
For Tomcat, this is C:\Hyperion\deployments\Tomcat5\EPMAWebTier\webapps\awb\WEB-INF\conf.
Open AWBLog4j.properties.
Modify this line:
log4j.logger.com.hyperion.awb=ERROR,logfile, stdout to log4j.logger.com.hyperion.awb=DEBUG ,logfile, stdout
RESTART EPMA
Then try and delete again and check to see if the logs have further information.
Cheers
John
http://john-goodwin.blogspot.com/

Create Planning Application for the first time without using workspace

hi,all:
I come across a problem:The Hyperion Planning Application isn't configured into the workspace,but i have to create a Hyperion Planning Application for the first time.So, have any other methods to solve this problem? Can I use other tools or something to create it?
thanks very much

yellow wrote:
Hi,John,Thanks for your quick reply.
I think after install Hyperion Planning,at first time can't create application in this address:http://localhost:8300/HyperionPlanning/ ,usually create it in workspace.
Is the address you said different from http://localhost:8300/HyperionPlanning/?
thanksI gave you the address to create a planning application directly - http://localhost:8300/HyperionPlanning/AppWizard.jsp
Notice the AppWizard.jsp on the end.
If it version 11 you will be able to create your datasource from that location, if it is version 9 then you will have to create a datasource first from the configuration utility.
Cheers
John
http://john-goodwin.blogspot.com/

Unable to find planning application option in Administer

Hi
i have created application through web in 9.3.1 version but i am unable to find out the planning option.
In workspace
Navigate --> applications --> here both hfm and planning applications display but
Navigate -->Administer -->Classic application Administration --> consolidation administration(HFM) only shows but planning doesn't shows here
please suggest ur valuable suggestions to rectify this..
Thanks and Regards
Rajips
Edited by: user10919054 on May 10, 2009 11:14 PM

Hi,
This is governed by the shared services role of "Dimension Editor", have you provisioned the role to the user that is accessing workspace?
Cheers
John
http://john-goodwin.blogspot.com/

Unable to create planning application in workspace

Similar Messages

Maybe you are looking for