Unable to Delete Cell Frames With A Table

Hi,  I've placed a linked Excel table and when I print a PDF of the table the cell borders keep showing up even though I've selected none in the stroke preferences.  Just wondering if someone can help.  ThANKS.

Iussue fixed.  All sorted.  Cheers.  Just had to read through the table options carefully.

Similar Messages

  • Unable to delete double records from internal table

    Hi all,
    The internal table is like this
    begin of ta_itab1 occurs 0,
          mark type c,
          cnt_hedg type c,
          kunnr like vbak-kunnr,
          vbeln like vbak-vbeln,
          posnr like vbap-posnr,
          matnr like vbap-matnr,
          kwmeng like vbap-kwmeng,
          h_kwmeng like vbap-kwmeng,
          spart like vbap-spart,
          werks like vbap-werks,
          component like bom_item_api01-component,
          comp_qty like bom_item_api01-comp_qty,
          comp_qty1 like bom_item_api01-comp_qty,
          base_quan like stko_api02-base_quan,
          comp_unit like bom_item_api01-comp_unit,
          base_unit like bom_item_api01-comp_unit,
          bukrs_vf like vbak-bukrs_vf,
          end of ta_itab1.
    and used the sytax:
    sort ta_itab6 by kunnr vbeln.
    DELETE ADJACENT DUPLICATES FROM ta_itab6 comparing COMP_QTY COMP_QTY1.
    but Im unable to delete duplicate record .
    Thank You.
    anu

    Hi ,
    You need to use the fields in sort statement on whichyiu wnat to perform Delete Adjacent duplicates..
    sort ta_itab6 by kunnr vbeln COMP_QTY COMP_QTY1.
    DELETE ADJACENT DUPLICATES FROM ta_itab6 comparing COMP_QTY COMP_QTY1.

  • Problem using DELETE ADJACENT DUPLICATES with dynamic table

    Hello All,
       In my program i have to delete duplicate records from dynamic table.
    I tried using  DELETE ADJACENT DUPLICATES FROM <DYN_TABLE> COMPARING <fieldname1> <fieldname2> but it fails in syntax check, then i tried like below:
      DATA string type string.
      string = '<fieldname1> <fieldname2>.........'.
      DELETE ADJACENT DUPLICATES FROM <DYN_TABLE> COMPARING (string).
    It also got failed at runtime.
    Please suggest how can i achieve this....
    Regards
    Munish Garg

    Hi,
    this code is worked truly.
    You can try this.
    Regards.
    DATA itab LIKE STANDARD TABLE OF mard.
    SELECT * FROM mard INTO TABLE itab UP TO 100 ROWS.
    * You define max number of the field that you need
    data : cmp01  TYPE string,
    cmp02 TYPE string,
    cmp03 TYPE string,
    cmp04 TYPE string,
    cmp05 TYPE string.
    * You fill the fields that you need, others is clear.
    cmp01  = 'MATNR'.
    cmp02 = 'WERKS'.
    CLEAR : cmp03,cmp04,cmp05.
    SORT itab BY (cmp01) (cmp02) (cmp03) (cmp04) (cmp05).
    DELETE ADJACENT DUPLICATES FROM itab COMPARING (cmp01) (cmp02) (cmp03)
    (cmp04) (cmp05).

  • Unable to delete rows from remote db table

    Hi
    I am relatively new to SQL Server and this issue is strange to me.
    In my vb.net code I am opening a connection to local MS Access DB using oledb provider and then am executing below query to remote SQL Server via DBCommand.ExecuteNonQuery();
    DELETE tblStaff.* FROM Staff INNER JOIN [ODBC;Driver=SQL Server;SERVER=<remote ip>;DATABASE=dddddddd;UID=uuuuuuuu;PWD=ppppppppp].tblStaff ON Staff.[Staff ID] = tblStaff.[StaffID] WHERE Staff.[Contact Status] <> "Current"
    This however created below error in the code;
    System.AccessViolationException was unhandled
    Message=Attempted to read or write protected memory. This is often an indication that other memory is corrupt.
    Source=System.Data
    StackTrace:
    at System.Data.Common.UnsafeNativeMethods.ICommandText.Execute(IntPtr pUnkOuter, Guid& riid, tagDBPARAMS pDBParams, IntPtr& pcRowsAffected, Object& ppRowset)
    at System.Data.OleDb.OleDbCommand.ExecuteCommandTextForSingleResult(tagDBPARAMS dbParams, Object& executeResult)
    at System.Data.OleDb.OleDbCommand.ExecuteCommandText(Object& executeResult)
    at System.Data.OleDb.OleDbCommand.ExecuteCommand(CommandBehavior behavior, Object& executeResult)
    at System.Data.OleDb.OleDbCommand.ExecuteReaderInternal(CommandBehavior behavior, String method)
    at System.Data.OleDb.OleDbCommand.ExecuteNonQuery()
    During testing I noticed that if I create the relevant table tblStaff in another database on the same remote SQL Server then it works fine, so it appeared to me there is some issue with the original backend db or the table.
    The relevant table tblStaff is related to several tables in the database. I assumed that relations may be an issue so I set the relations to cascade delete even though none of the tables contains any data at this point. This did not work. I then went into
    database diagram, added all the tables and then deleted all relations of the tblStaff table. This did not work either. I then used 'Script Table as..->CREATE to' to script the tblStaff in Management Studio, deleted original tblStaff and ran the create script
    above to recreate the tblStaff table. This worked.
    What is the problem here and why doesn't the table accept delete query in its original form? I appreciate it’s the .net code that creates the error but as the error seems to be related to the backend SQL Server db therefore I have posted it here in case
    someone can help with this.
    Thanks
    Regards

    Sorry I still do not get it. when you say "Its a legacy app", are you talking about the VB.NET app ?
    If so then I repeat my self :-) Why not to connecting to the SQL server directly?
    * even if you need information from several databases (for example ACCESS + SQL Server), in most cases, it is much better to connect directly and get each information to the app. Then in your app you can combine the information and analyse it
    [Personal Site] [Blog] [Facebook]
    Access app is the legacy app. 

  • Unable to delete line item with 0 quantity in Invoice.

    Hi Experts,
    I came across a Invoice which reflects in VF04 as pending Billing due list. When i checked at the inter company Invoice i came across a line item with "0" quantity and price as zero, interestingly the replinishment cross company delivery document  for the same line item for "0" quantity had a Batch assigned to it.
    Now the issue is cusotmer has selected the line item with XX quantity and have selected the accounting document to be generated but the line item with "0 was left over and now still reflects in VF04.
    Customer does not want to reverse the full cycle to resolve the issue since the document was created a year back.My Question  is can we get the line item with "0" quantity to clear accounting so that it will not reflect in VF04.If so what will be process to do that.
    Thanks in Advance to advice.
    Regards,
    Sridhar.R

    Hi,
    It is  not possible to delete this line item, you can discuss with your client and delete it from the table.
    And now coming to the reasons why it has come into the invoice & Delivery
    1. The Batch Item category must have been configured as relevant for billing...check this and make it irrelevant if the client does not do batch specific billing. --- This will stop the batches from coming into the invoice.
    2.  Check for the batch item category in delivery if Zero quanity is allowed...if it is allowed make it not allowed and make it an Error message, whenever there is a zero quantity system will give a message.

  • When using multiple tables in different sheets is it possible to delete cell/rows on all tables at the same time?

    I have recently changed from Excel to numbers and i can't  work out how to change cells. I have a sheet for each month, on that sheet i have all my outgoings on a daily basis. Those cells are the same in every table. In Excel i could hold shift and click the tab for each month and then change the information in all those cells. Can i do this in Numbers, if so how?

    This is not a feature of Numbers.

  • Unable to delete last entry in Custom table

    Hi,
    I have one custom table which allows only some specific entries to be maintained in the table.I have used a standard table as a check table for dis.I found no issue while maintaining entries in the table.But when i try to delete the last entry in the table i get the message "No entry exist".Long textNo entries were found when importing data from the database.
    Kindly help.

    Hi,
    If it is not possible through table maintainence then write a small Z program to delete the entries in devlopment system and then if then if you want you can transfer those to other systems.
    delete from ZTABLE where {give your condition for the last record}.
    Regards,
    Sandipan

  • ABAP query- unable to delete the join between tables

    Im unable to delete the join between two tables. when i right clicked on the join then it gives two options:
    1. Display join condition
    2. Remove join condition
    both these options are grey in color so i cant select them. how can i remove join?

    goto SQ02 and enter infoset and goto change mode agagin select change mode and click the join then select and delete link...

  • Unable to display text with image in a cell of web dynpro table.

    Hello,
    I am unable to display an image with the text inside a cell of web dynpro table. The image doesn't come at all. I am trying to display the image of an object and the object description alongside within the same cell.
    Thanks and Regards,
    Abhijnan

    Hi
    Pls check the below link
    http://help.sap.com/saphelp_nw70ehp2/helpdata/en/9b/46bb0d339b42cc8d30636ca0c9f5b6/frameset.htm
    The only problem is only the below UI elements are supported
    ■Button
    ■ToggleButton
    ■LinkToUrl
    ■LinkToAction
    ■FileDownload

  • Unable to delete a row in table control

    Hi,
    I'm unable to delete a row in table control.
    I have defined a selection column for my table control but it is not getting value 'X' when i'm selecting a row for deletion.
    Also, when I press enter, some of the columns in table control are getting initialized. I'm passing these values to the internal table along with other columns.
    Please help.
    Regards,
    Manasee
    Message was edited by: Manasee Chandorkar

    hi,
    kindly chk this.
    PROCESS BEFORE OUTPUT.
    MODULE status_9010.
    LOOP WITH CONTROL tab_control.
    MODULE move_data_to_table.
    ENDLOOP.
    PROCESS AFTER INPUT.
    LOOP WITH CONTROL tab_control.
    MODULE move_data_from_table.
    ENDLOOP.
    *& Module move_data_to_table OUTPUT
    This is to move the data from the internal table to the table control
    MODULE move_data_to_table OUTPUT.
    This is to move the data from the internal table to the table control
    zmpets_mode-modecode,zmpets_range-rangeid,zmpets_servfacto-factor are column name of table control
    READ TABLE int_factor INDEX tab_control-current_line.
    IF sy-subrc = 0.
    zmpets_mode-modecode = int_factor-modecode.
    zmpets_range-rangeid = int_factor-rangeid.
    zmpets_servfacto-factor = int_factor-factor.
    ENDIF.
    ENDMODULE. " move_data_to_table OUTPUT
    *& Module move_data_from_table INPUT
    Date is moved from the table control to the Internal Table
    MODULE move_data_from_table INPUT.
    To move the data from the table control to internal table 'INT_FACTOR'.
    int_factor-modecode = zmpets_mode-modecode.
    int_factor-rangeid = zmpets_range-rangeid.
    int_factor-factor = zmpets_servfacto-factor.
    int_factor-chk = line.
    *here if the data is there, it will modify
    MODIFY int_factor INDEX tab_control-current_line.
    IF sy-subrc NE 0. "data not exixting in table control . ie new data, then append it
    APPEND int_factor.
    CLEAR int_factor.
    ENDIF.
    ENDMODULE. " move_data_from_table INPUT
    *delete a line from table control
    MODULE user_command_9010 INPUT.
      CASE sy-ucomm.
    When an entry is deleted, and the entry is removed from the table
    control.
        WHEN 'DELETE'.
          PERFORM f_del_frm_tab_cntrl.
      ENDCASE.
    ENDMODULE.
    FORM f_del_frm_tab_cntrl .
      LOOP AT int_factor WHERE chk = 'X'.
        DELETE int_factor WHERE chk = 'X' .
        CONTINUE.
      ENDLOOP.
      CLEAR int_factor.
    ENDFORM.
    for any clarifiaction pls mail me.
    pls reward points, if this helped u.
    regards,
    anversha.
    [email protected]
    Message was edited by: Anversha s

  • "unable to acquire rendered frame" error message with AE CS6 Motion Tracker

    Hi Everyone,
    I am having issues with the built in tracking software in After Effects CS6. Everytime I hit "analyze" I receive the error message "unable to acquire rendered frame" or it simply remains at "0% (frame 1 of 70)". Sometimes I get the message "unable to obtain dynamiclink server connection". I've tried different types of footage, re-started, re-installed the software, deleted (emptied) the database and caches, started a fresh composition, and even did a fresh install of OSX but nothing works. Any ideas? I've searched a lot of forums on this and I've seen the problem in similiar situations (same error message with Warp Stabilizer analysis) but nobody seem to have found any resolution.
    I'm running AfterEffects CS6 on Mac OS 10.8.
    Processor  2.93 GHz Quad-Core Intel Xeon
    Memory  8 GB 1066 MHz DDR3 ECC
    Graphics  ATI Radeon HD 4870 512 MB
    Downloaded all the latest updates.
    Done all the usual emptying of caches, repaired disk permissions, re-installation of software, etc.
    Any help would be very much appreciated.
    Thank you.

    What firewall/antivirus software are you using?
    After Effects communicates with the background camera tracker process using TCP, and some overly aggressive firewall/antivirus software can block this communication. That may be the problem in your case.
    See this document for a closely related issue:
    http://helpx.adobe.com/x-productkb/multi/startup-screen-hangs-premiere-after.html

  • Unable to delete Role from User ID in SAP SOLMAN production system but able to from DEV with the same authorization, pls suggest

    unable to delete Role from User ID in SAP SOLMAN production system but able to from DEV with the same authorization, pls suggest

    Hi,
    For SU01 role removal, you do not need S_USER_AGR with 02, and as you mentioned both authorizations available in production, if so trace should not show you the S_USER_AGR with 02 with RC=04.
    I would recommend to do role comparison for the user performing the activity. and then check if you have the S_USER_AGR with 02 in user buffer SU56.
    But ideally it should not ask you S_USER_AGR for 02 through SU01, so please take help of abaper to debug it.
    Also put trace in non-prd to see if S_USER_AGR is getting checked with 02 for removal through SU01.
    BR,
    Mangesh

  • How to delete entries in the T030 table with LSMW?

    Hi all,
    I need to delete 600 entries from T030 table (Fix account table), Tcode OBYG, and I want to use a legacy for this,
    but I don´t know how or if is possible delete entries from a table with a legacy.
    Thanks in advance!

    You Can Use SCAT instead.

  • Unable to merge cells in Table(WAD)

    HI Gurus,
    I am working on BI7.0,
    I am trying to create Web Templates to display reports in portal for that
    I have selected Table (rows and coloms), When I try to merge first two cells
    (to write descritpion of query) it is not allowing me to merge.
    Can anybody suggest me how to merge two cells in table.
    Thanks in advance.
    Maruthi
    Edited by: maruthi k on Dec 15, 2008 2:04 PM

    If you're talking simply about merging the cells in an HTML table, then you use the COLSPAN or ROWSPAN options in  HTML.
    Check out the following
    <html>
    <body>
        <table border="1" cellpadding="2" cellspacing="0">
            <tr>
                <td>
                    Heading 1</td>
                <td>
                    Heading 2</td>
                <td>
                    Heading 3</td>
            </tr>
            <tr>
                <td colspan="2">
                    Text covering 2 cells</td>
                <td>
                    Last cell</td>
            </tr>
            <tr>
                <td rowspan="2">
                    Text covering 2 cells across 2 rows</td>
                <td>
                    Text in cell 2 row 2</td>
                <td>
                    Text in cell 3 row 2</td>
            </tr>
            <tr>
                <td>
                    Text in cell 2 row 3</td>
                <td>
                    Text in cell 3 row 3</td>
            </tr>
        </table>
    </body>
    </html>
    Take the above code and put it in a simple HTML file and run that file in your browser, you should then be able to see how COLSPAN and ROWSPAN work.
    COLSPAN=2 means that the cell spans 2 columns. Similary, COLSPAN=3 would then span 3 columns.
    Remember though that when you set COLSPAN=2, you will need 1 less TD in that row, otherwise you end up with an extra cell in that row which makes your table look all messy.
    Now, in your template, get into the XHTML view, find the table, and set the COLSPAN / ROWSPAN accordingly.
    Hope this helps.
    Cheers,
    Andrew

  • GetPivotData with cell reference in a Table

    I was told that this might be a better place to post this question than Microsoft Answers for Office.
    I have a Table in which I need to use a GetPivotData function.  I need to use a cell reference in that GetPivotData function.  I have done this before with no problem in a normal cell range, but it seems like the syntax when using a Table screws
    things up.  Can anyone help me out here?
    The GetPivotTable function would normally look like this if not in a Table.
    =GETPIVOTDATA("[Measures].[Total Blocked Dollars]",'Sheet2'!$A$4,"[Dim Prod Ctrl No].[By Prod Ctrl No]","[Dim Prod Ctrl No].[By Prod Ctrl No].&[18418]")
    That formula sits in a column called "Block" in my Table.  The 18418 sits in a column called "ID" in my table.  So what I have tried is:
    =GETPIVOTDATA("[Measures].[Total Blocked Dollars]",'--Report Blocks--'!$A$4,"[Dim Prod Ctrl No].[By Prod Ctrl No]",concatenate("[Dim Prod Ctrl No].[By Prod Ctrl No].&[",[@[ID]],"]"))
    I have tried a few combinations like this but I can't seem to use a cell reference from a table (which requires the [@[field]] syntax) to work with the GetPivotData.
    Any ideas?
    Thanks!

    That's not the issue.  The GETPIVOTDATA function is actually IN a table.  The arguments for the GETPIVOTDATA function need to reference a cell/column in the table, and it's only PART of the argument that needs to be replaced.  In the example
    below the 18418 needs to be replaced with the data in the same row of the table in a column named ID.
    =GETPIVOTDATA("[Measures].[Total Blocked Dollars]",'Sheet2'!$A$4,"[Dim Prod Ctrl No].[By Prod Ctrl No]","[Dim Prod Ctrl No].[By Prod Ctrl No].&[18418]")
    Does that clarify any?
    Thanks for the response!

Maybe you are looking for