Unable to download drivers

When I try to download drivers for the hp photosmart d7460 it Interrupts’, and will not allow me to complete the download. I use windows vista 64 bit o/s
I have tried all hp solutions to no avail.Thw only thing that is new is a integrated router/modem Also I have the software and drivers on my system, but it will not run

Make sure you are downloading the correct file from here:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=2100&lc=en&cc=us&dlc=en&sw_lang=&product=3184...
Now try.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Similar Messages

Satellite L655 - Unable to download drivers

I'm trying desperately to reinstall a Satellite L655 and getting snookered in all directions.
1. I created recovery disks from the installation on the old, failing hard drive. When I install from these (after watching paint dry for about an hour) it reboots and then fails on first run - "windows setup could not configure windows to run on this computer's hardware". Forum suggestions about this error did not help.
2. The support partners in South Africa do not have copies of the factory recovery disks. They tell me they download drivers ad hoc from the support site.
3. I tried to clone the old disk (Windows is running on it, after all) but CloneZilla barfed on the bad sectors.
4. I installed Windows from a Microsoft OEM install disk image. It runs, but obviously requires hardware drivers. So I downloaded most of those I need, like LAN card, Intel Chipset, and Sound card. But the WLAN and Display drivers just won't download - these are the largest files (60 MB & 123 MB respectively) and the downloads fail before completion. WELL before completion. I tried several times, using up a significant amount of my bandwidth allocation for the month (we have capped access here in Darkest Africa!)
I tried the downloads from another site I have remote access to, thinking maybe there was something wrong with my broadband - and got the same exact issue. The remote site has Internet throughput speeds of around 6 Mb/s - surely enough for a 120 MB file transfer? Apparently not.
I have tried these downloads from before lunch time, through the afternoon and night and it's now after midnight, all with the same results (I am on a time zone that is right in the middle of the Euro zones).
Toshiba's website does not support download resuming, and there are no mirror sites. What in the blue blazes is a person supposed to do?
*UPDATE*
the 60 MB WLAN driver download to remote site succeeded on the second try. The 120 MB display adaptor driver failed even sooner on second try. I don't see much point in trying again, do you?

Hello Chris
Clean OS installation is very simply and I have done it in the past many times. If your Internet connection is stabile all necessary drivers, tools and utilities can be downloaded from Toshiba download page - http://www.toshiba.eu/innovation/download_drivers_bios.jsp
Ive checked it and your Satellite model is listed there and supported for Win7 64bit.
WLAN driver you can find on Toshiba WLAN portal - http://aps2.toshiba-tro.de/wlan/
As I already wrote on Toshiba download page you can find all drivers, tools and utilities. The same stuff is included in original Toshiba recovery image. Maybe you don't need some of them but I recommend you to install whole package.
Here is also install order that will help you:
Win7 64bit
TOSHIBA Assist
Synaptics Touch Pad Driver
Realtek Card Reader
TOSHIBA HW Setup Utility
TOSHIBA Supervisor Password Utility
TOSHIBA Web Camera Application
TOSHIBA HDD_SSD Alert
TOSHIBA Disc Creator
Intel Chipset SW Installation Utility
Intel Management Engine Interface
Display Driver
Intel Turbo Boost Technology Driver
Intel Rapid Storage Technology Driver
Conexant Audio Driver
TOSHIBA Value Added Package
Atheros LAN Driver
TOSHIBA Software Modem
Conexant Modem Driver
Bluetooth Stack for Windows by Toshiba
Wireless LAN Driver
ConfigFree
My advice for you: download all stuff at first and save it on USB stick. After doing this reinstall Windows again and start to install listed stuff following this installation order.
One more thing: according notebook specification your machine should have Realtec WLAN card inside.
If you have more questions you are welcome.

HT3669 Failed printer setup, bonjour via airport express on 10.8.3, unable to download drivers?

Trying to install a Samsung SCX-4500 printer over bonjour via airport express. My Mountain Lion machine sees the printer and I've manually installed the latest Samsung drivers, it says it can't find the software on Apple's servers. I just downloaded the latest drivers from Samsung directly, it did not resolve the problem.
I am unable to select printer drivers manually for the 4500; even if I manually select the 4500W drivers it still attempts to download software (unsuccessfully). It works perfectly on 2 Lion machines and a PC, unsure what the deal is.
I'm having trouble even getting the post message' button to work now, it isn't my day...

Link to Apple supplied print drivers:
Samsung Print Drivers
You can also try resetting the print system:
Reset Printing System

AppleMobileDeviceSupport.msi - unable to download drivers to sync iphone

Installed and uninstalled and reinstalled itunes about 5 times but the same problem keeps happening - the computer is unable to recognize my iphone 3GS. My computer recently had to be restored to factory settings and I have updated all the software. It's an HP Pavilion running on MS Vista.
I have tried reseting the phone and the computer but it keeps coming back to a problem with AppleMobileDeviceSupport.msi
How do I fix this problem? I am not supper tech savvy but can follow instructions very well. I will be switching to a MAc Book Pro soon but I still need to fix this in the interim!
Help Please!

but it keeps coming back to a problem with AppleMobileDeviceSupport.msi
When are you getting that one, mission? Is it when you go to reinstall itunes, or under some other circumstances?

Unable to load drivers on Windows 7 64 bit - HP OfficeJet Pro L7590

Unable to load drivers on my PC, once worked after cleaning up my PC reloaded latest software from HP download. Fails everytime via USB tried also direct network connect same result. Tried uninstall and reinstall including trying to stop windows update from installing driver, this still happens from local directory. Tried installing software with printer unplugged first, still not working.
Any help would be great!
Frank

First! Thank you in advance for your help, suggestions, and assistance! I use an All-In-One under HP Officejet Pro 8500 Wireless. My computer keeps telling me I need drivers on it for my printer. My Desktop computer is an HP p7 1030. Please help me...tried everything I know. Also, my HP printer will not print in blue. What should print out blue, comes out in a light red or pink. If it's supposed to come out red, it comes out in red, just fine. In addition, I've purchased new cartridges and many times I purchase the 940 XL and the cartridges don't last nearly what they are advertised to last. Very disappointing. I need your help and will greatly appreciate any suggestions you have for me! Thank you! Bette

Unable to download pdf file in windows 8.1

After upgrading to windows 8.1, i have been unable to download pdf files sent via yahoo email, IE11 and Adobe Reader 11. Did not have this problem before with windows 8. I click on the pdf attachment, NOrton says that the file is safe but nothing happens. Am unable to save the file to my computer either. Have already reloaded Adobe Reader repeatedly, drivers for window 8.1 associated with the hardware on my system, newest version of internet explorer,, upgraded drivers for my Canon printer and still no downloads!!!
Can anybody help? Microsoft community unable to give anymore suggestions.

Wrong forum (this is Digital Editions), but ...
I find .pdf files often won't launch properly on my Win8.1. It starts the process but it doesn't do the right thing.
Try making sure you don't have any copies of Reader working (AcroRd32.exe on my 32 bit Win 8.1).
Start a copy from the start screen (or start menu if you've set one up) BEFORE you try to access the file.
Now try to do the download or open it from the downloads directory.
I find that way the file will open properly.

I have put Windows 8 on my Mac pro, in boot camp, no I am unable to load drivers

I have put Windows 8 on my Mac pro, in boot camp, no I am unable to load drivers to get it working as it should. I have tryed Winows 7 Con, in setup.

Did you download the drivers to a FAT32 formatted USB drive per the instructions?

Brother HL-3170CDW won't print in color, has poor print quality. I have downloaded drivers, and firmware from Brother with no success.

Just received this printer, and am unable to have any success with it printing in color. I have downloaded drivers, and firmware from Brother that are for OSX 10.9. Also, the print quality is quite poor. Any suggestions what I should be looking for to resolve this? I feel like I am back in the 90's with Windows 3.1!

You need to go to the brother website and download the driver for your printer. I had the same problem, and resolved it just now. The driver for this particular printer is not a good match for any of the preinstalled printer drivers on os x.

How to run downloaded drivers on Fresh Install of Labview 6.1 on a Mac G4 OS 9

I have just completed a fresh install of Labview 6.1 on an Macintosh G4 running OS9. I can run it and it seems to work just fine. I downloaded some drivers for an oscilloscope (HP 546XX) to run with an HP 54603b. When I installed, I went to open the 'Get Started.VI' I get a freeze and have to force quit out of labview. I am not sure how to resolve this. I am pretty sure that it is independent of the device, since I can open the vi's at least on another computer with no hardware attached. So I guess to boil my situation down. I have 2 questions:
-How do I get a fresh install on a mac G4 OS 9 to run downloaded drivers from the internet
-How do I ensure that I have the hardware configured on
a macintosh to run properly.
I really have little experience with macs so I am not really sure what my options are or what could be the problem so any assistance would be much appreciated.

Hmmm. I wonder if NI-VISA isn't installed correctly on this machine.
When LabVIEW loads a VI that uses a VISA name control on the front panel, it queries VISA for the installed devices. Sometimes this takes a few seconds, but maybe in your case, something has been corrupted and it's hanging.
To try to narrow this down, first run the separate program "VISAConfig". This should list your devices. If this works, this means it's pretty likely that VISA is installed correctly.
Next, run LabVIEW. On an empty front panel, select the "Controls->I/O->VISA Resource Name" and place it on the front panel. When you click on the arrow on this control, you should see a list of your devices. If this works, then that indicates that LabVIEW is successfully talking
to the VISA software.
If both of those succeeded, then we have to take a closer look at this particular instrument driver. Can you drop other VIs (say, Initialize or Close) without hanging?
If either of the first two steps fail, I'd suggest that you reinstall the VISA software. You may want to try the latest version of NI-VISA (from ni.com), but first confirm that it supports LabVIEW 6.1.
I hope this helps.
Brian

Unable to download Flex Builder 3.0.2 Professional Eclipse Plug-in Trial

Since yesterday I am unable to download the Flex Builder plugin for eclipse, having tried all the combinations of Language/OS available for this product, browsers and two different PCs at my home.
http://www.adobe.com/cfusion/tdrc/index.cfm?product=flex_eclipse
Using the link above the case is always the same no matter what browser/computer. After the "Download" button is pressed the website "freezes" for about 30 seconds, then it refreshes and soon an email message arrives with the title
"Helpful links and resources for your Flex Builder 3 Professional Trial".
Furthermore when I visit a link provided in the email Getting Started - Flex 3 Getting Started - Adobe Learning Resources, all the hyperlinks such as Watch, Full Tutorial, Download Project, PHP and Java will simply redirect me to the very same page (i.e. the one provided in this sentence).
I'd appreciate any help given on this matter, thanks.

Moving this discussion to the Flex Builder plug-in forum.

Unable to download new songs from iTunes

I have iTunes 7.6.2 and when I plug in my iPod I get 'syncing' then 'its ok to disconnect' message and I'm unable to download new songs I just bought. I tried this on 2 computers and the same results. One is running XP Pro SP1 and one is running Vista SP1 and the same issue with both pc's.
Any suggestions?

iOS 6 (which runs on the iPhone 5) requires iTunes 10.7, which requires OS X 10.6.8 or higher.
Upgrade OS X on your Mac.

Unable to download FF on new computer

I have a new computer with Windows 7, and I am unable to download FF at all. It acts like it's downloading, but I am repeatedly getting the message the download has been interrupted. I have already tried downloading the localized version from https://www.mozilla.org/en-US/firefox/all/?q=English%20(US), and I got the same message.

'''[http://encyclopedia2.thefreedictionary.com/Linux+Safe+Mode Starting The Computer In Safe Mode; Free Online Encyclopedia]'''
If need, go to another computer. '''[http://www.mozilla.org/en-US/firefox/all/ Download Firefox Full Installer For All languages And Systems]''' {web link} to a thumb drive. Then install it when you get home.

After Ios 8 upgrade I am unable to download new apps?

After the upgrade to iOs 8 I am unable to download new apps from the iOs App Store.
I have attempted to download the "Instapaper" App this mornig several times and have been unsuccessful.
I launch the App Store and find the Instapaper App, click on the +Free button, which then turns into the download button , I click on the download button and the spinning icon appears for a short period of time and then it reverts back to the +Free button. I have repeated this 10+ times and get the same results.

Change App Store
1. Tap "Settings"
2. Tap "iTunes & App Stores"
3. Tap on your Apple ID
4.Tap "View Apple ID"
5. Enter your user name and password.
6. Tap "Country/Region."
7. Tap "Change Country/Region"
8. Select the region where you are located.
9. Tap "Done".

HT202860 Forgot administrator password and unable to download applications. I have my Apple ID but it won't work.

I forgot my administrator password and I am unable to download applications now. In particular I am trying to download Adobe Reader at the moment but my Apple ID is not enough, it is requesting another password. Anybody can help? Thank you

Forgot Your Account Password
For Lion, Mountain Lion, or Mavericks
    Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
     When the menubar appears select Terminal from the Utilities menu.
     Enter resetpassword at the prompt and press RETURN. Follow
     instructions in the dialog window that will appear.
     Or see:
       Reset a Mac OS X 10.7 Lion Password
       OS X Mountain Lion- Reset a login password,
       OS X Mavericks- Solve password problems,
       OS X Lion- Apple ID can be used to reset your user account password.

Unable to download Additional Loops For Garageband Ctrl R Does Not Work

I am unable to download the additonal loops for Garageband on my iMac Purchased New Spring 2013.
I have done the following with no success:
Uninstalled Garage Band.
Reinstalled Garage Band from App Store.
Reindexed Loops
Clicked on missing loop and choose Update Now
Clicked on missing loop and choose Update Later
Used Ctrl+R in App store (nothing available). (Yes, I logged in with AppleID)
Deleted Apple Loops Folder
Deleted Apple Loops index Folder
Re-indexed loops in Garageband
My Library... Apple Loops folder is empty, but the pre-installed loops for Garageband are there.
I have also tried the terminal command: sudo softwareupdate --list
There are NO updates available.
Anyone have any addittional suggestions for installing the missing loops from Garageband?

What exactly happens, when you try to download the missing loops - when you click on a missing loop and choose "Update now"?
My Library... Apple Loops folder is empty, but the pre-installed loops for Garageband are there.
Are you looking in the library in your Home Folder
"~/Library/Audio/Apple Loops/" , or in the System library "/Library/Audio/Apple Loops/" ?
The loops should be installed in the System Library
"/Library/Audio/Apple Loops/".
How did you set up your new mac? Did you migrate from an older mac using Setup Assistant or Migration Assistant? Did you migrate an earlier GarageBand installation?

Unable to download drivers

Similar Messages

Maybe you are looking for