Unable to edit generated Word output

Hello all,
after generating printed Output, the Word document cannot be
edited. The entire content can be copied into a new document though
and then it can be edited. It makes no difference whether the
output into a single Word document or a master is selected. This is
Word 2003 and RH X5 (with Word 2003 patch).
Any ideas about this?

On Adobe's site there are some templates that can be
downloaded. They are referenced in the Print Issues topic on my
site.
I doubt having the wrong ones would have this effect but as
nothing else is working. Have you got a dual installation of Word?
Wonder if that could be a factor.

Similar Messages

  • Still unable to edit a word document after conversion from pdf?

    I converted a pdf file to a word document but am still unable to edit the word document and save as a newly created word document.  please help, thanks.

    Hi Disc9,
    In order to help you. Let me know which application of Adobe you are using including the version.
    Also let me know the complete workflow how you convert the PDF to docx/doc.
    Regards.

  • Word output troubleshooting

    TCS 3.5 (RH9), source in FrameMaker, trying to generate Word output, Word 2010, macros enabled. It's a large project, PDF's around 1,000 pages. Generation stalls / hangs about 80% of the way through with no message. Occasionally I get a message from Word that it's trying to recover my document, but that's not when it hangs.
    Same project exports fine to WebHelp.
    Same installation generates Word fine from sample project.
    Tried both .doc and .docx, same results.
    I suspect there's an issue in the source, but it's hard to guess where. Is there a log file or something I can look at to see where it's hanging?

    Sometimes the Output View will tell you the process is hanging after a particular topic so it can be useful, depends on the cause.
    I think the reason Generate Individual Documents is working is because it is breaking the output down into bite size chunks. As I indicated, the size of the document you were creating was large and the process of converting from HTML to Word is very resource hungry. At that level it will kill pretty much any PC. Did you assume the process had hung or did you look at Task Manager. Often a PC will report something is not responding whereas Task Manager will say otherwise.
    At some point it might be worth letting the process run overnight.
    If single documents suit your needs then all is well but often they are not what people want. You can either recombine those documents or just generate a few documents and then merge those, if you have too many single documents to recombine.
    See www.grainge.org for RoboHelp and Authoring tips
    @petergrainge

  • Unable to edit document using "Edit with Word" option

    Hi All,
    i am having an issue with Office web apps. i am using SharePoint 2013 and Office web apps 2013. all the configurations have been done successfully. but i have a different kind of issue.
    i am able to open documents in browser
    i am able to edit document using " edit with word/excel web" option
    but i am unable to edit document using "edit with word/excel" option
    i have Office 2010 installed on my local machine.
    do we need to have MS office of 2013 version? or is there anything missing from configuration part.
    Please help me.
    Thank You,
    Bhaskar.

    Hi,
    According to your post, my understanding is that you could not use the "edit with word/excel" option.
    I had tested the issue with the Office 2010, the option worked well.
    You don’t need to install the Office 2013 to use this option.
    What did you mean “but i am unable to edit document using "edit with word/excel" option
    Did you mean the option gray out? Did the issue occur in other browsers?
    You can use compatibility mode to check whether it works.
    Open IE->Tools->Compatibility View Settings
    You can also add the site into Trusted sites.
    Open the IE->Internet Options->Security->Sites->add the site into the Websites, then check whether it works.
    What's more, you can also use other browsers to check whether it works, such as Firefox, Chrome.
    Thanks & Regards,
    Jason
    Jason Guo
    TechNet Community Support

  • Unable to generate the output for S_ALR_87012048

    Dear All,
    We are trying to execute the report  S_ALR_87012048 for the first period in 2015.  We have tried execute this report with report date 25.01.2015 (which is the last day in period 01), but it is giving no data was selected.
    Can anybody suggest whether I need to give any further inputs to generate the output apart from the below.
    Co.code : 9000
    Reporting date : 25.01.2015 (which is the last day in our fiscal period 01 /2015)
    Dep area : 01
    Sort Variant : 03 (co.code / bs  accounts / asset class)
    User able to execute this report in the last month successfully.
    We have completed all year ending process as well.
    I have tried execute this report in our quality system with reporting date as 31.12.2014 and 31.12.2015.
    Do we need to give reporting date as year ending date ? or last date of current period.
    Thanks in Advance.
    Prasad

    Hi Prasad,
    I do believe that you should consider the authorization side of the matter carefully as pointed out by Mahmoud on Feb 6th. Please check again the mentioned SAP Notes in that thread.
    For example, I just tested in my system, I can trigger a report even in a closed fiscal year with a report date end of each period. The only difference is that I get a information message:
    Report date is in a closed fiscal year
    Message no. AU172
    Diagnosis
    The report date is in the past.
    Here the report date is allowed to be the end of the year as well as any
    period end during the fiscal year.
    System Response
    In an asset report during the fiscal year (report date for a period end
    within the year) in a closed fiscal year, it can be the case that the results
    for depreciation or the net book value are different between the historical
    calculation and the current calculation for the report date. The reason for this
    are any changes to asset-related depreciation terms, such as the depreciation
    key, useful life, and so on. In the case of such changes, the asset values are
    recalculated with the currently entered depreciation terms.
    In an open fiscal year and a report date end of period I do not get AU172 and get an output.
    Beside above provided SAP Notes, also see another couple of SAP Notes with some interesting information are also:
    1566099  Reporting in Asset Accounting
    1491612  Authorization concept in FI-AA
    1394450  Reporting: Authorization check for report assignment
    929732    Authorization checks: Correction Note 856248
    856248   Authorization checks in asset reporting
    Regards,
    Brigitte

  • Some images don't transfer from RH8 to the Word output

    Why is it that some images don't transfer from the RH8 file to my Word output when I generate?
    They do transfer to the Flash Help, but not to Word.
    Some of them are small images - just shots of icons or tools - and others are quite a bit larger.
    It takes me at least another hour to format the Word document after the output.

    Hi Patti,
    I have had similar problems of images "softly and suddenly vanishing away" during export from RoboHelp to Word. I never really solved the problem, but I did find some useful tips.
    First you shouldn't embed your images; in the Printed Documentation Wizard you should select "Link to sub-directory"
    This has the advantage that lost images are now replaced by a small red cross -- easier to find when reviewing.
    Next, in Word, try Edit>Links. If you are lucky you will see something like this:
    Notice that some links have a Source File of ../Images; they are the ones I was missing. For some reason the path to the image file is moved up one level.
    I never found out why, but the workaround was simple: copy the entire Images directory and paste it one level higher in the directory hierarchy. A waste of disk space, to be sure, but it worked. The grabs above show Word2003 and RH8.
    Hope this helps,
    --- Derek

  • Some hyperlinks not appearing in generated Word doc

    When I generate a Word document, some of the hyperlinks show up, but not all. 
    I looked at Peter Grainge's site under Printed Documentation and issues, but didn't find anything that matched my problem. I also looked here on the forum, but didn't find anything.
    I have a feeling it's a problem with style mapping because the links that aren't showing up are those that appear in lists (both ol and ul).
    In other words, if I put a link in a paragraph that's a regular <p></p> paragraph, it appears in the Word doc and the link itself works.
    If I put it in a <li></li> paragraph, the link does not carry over; there is no blue underlining and if you mouse over what should be a hyperlink, the cursor does not change to a hand icon.
    Can anyone provide any suggestions?
    I'm using RoboHelp 9 and Word 2010.

    RoboHelp 10. I recently had a similar problem with hyperlinks not appearing in the PrintedDoc output, despite the following settings:
    Conditional Build Expression = None
    TOC = Default Table Of Contents, which contains all the topics that I want to appear in the output, but does not include every topic in the HTML Files (Topics) folder.
    Retain hyperlinks
    By comparing hyperlinks in a number of topics with the Word page, I found that hyperlinks in the Word document are not active when the target topic is in the root folder, but is not included in the TOC.
    In the Print Document Content dialog box, I typically select TOC>Show all topics and click the double right-pointing arrows so that all the topics in the default TOC are in the right pane.
    When I realized that hyperlinks to root topics were not active, I added the topics to the document content. To do this, I selected Top Level Folder and then selected each topic whose Help icon is white (i.e. not in the TOC) and clicked the right-pointing arrow to move it to the Content pane.
    However, to make me happy on a Friday afternoon: "Internal error encountered. Failed to generate Printed Documentation".
    I tried generating again, and now RH appears to be stuck on "Updating images". This happened the other day, too, and I waited 10 minutes before understanding that RH would stay stuck forever and would never even crash .
    Here's what I think will resolve this particular issue. I'll put the renegade topics in the Default TOC so that hyperlinks to them will be active. This is not a problem for my end users because I don't generate their output from the Default TOC -- my project has five other TOCs that are used to generate WebHelp Pro. I only use the Default TOC to:
    Edit topics in any module without having to open each individual TOC
    Generate a "Test ALL" SSL that contains everything, so that I can search more easily across modules
    Generate PrintedDoc for reviewers
    Hope this information is useful to anyone who encounters this type of problem.
    Carol

  • Using and Apex developed system and generating  word documents

    Started a new development project. We looked at using Apex for the system but ran up against a road block because the customer needs to generate word documents that they can edit and print. Does anyone know if Apex can handle this? Any suggestions on were to look for more information.

    Hi Dawn,
    Yes you can certainly do that, take a look at this quick overview -
    http://www.oracle.com/technology/products/database/application_express/html/configure_printing.html
    It refers specifically to PDF printing, however with BI Publisher you can output in Word Document format too.
    Hope this helps,
    John.
    Blog: http://jes.blogs.shellprompt.net
    Work: http://www.apex-evangelists.com
    Author of Pro Application Express: http://tinyurl.com/3gu7cd
    REWARDS: Please remember to mark helpful or correct posts on the forum, not just for my answers but for everyone!

  • Robohelp is unable to start Microsoft Word - one more time

    Hello,
    I read the previous post on this error and though the message is the same, I do not think the circumstances are.
    I am using xp prof, office 2010 (recently installed), and after that I recently d/l Robohelp 9 from the website.
    I am having many problems involving this message, but I set out today to get the simplest problem i could.
    So, i opened RH 9 from the start menu/all programs. I selected 'new project' and filled in the title and file name (project2_title, project2_file)
    The RH explorer opens.  Word 2010 opens.  The RH explorer still has an hourglass.  After 1-2 minutes, the hourglass is gone and the error message 'Robohelp is unable to start Microsoft Word' appears.
    I click 'ok'
    Hourglass, blanked out RH explorer which eventually does return.
    I click ctrl_t for a new topic, get the dialog, accept the defaults,  and eventually the hour glass goes away and I have the same error message.
    I click ok and i do not have the new topic when i expand the topic list.
    When i first started this, i was able to add a topic, but no longer. (last week was when i started).
    I have also tried to open the existing topic that was created using rh7 and having opened it, tried generating primary layout.  I got an error file with an error for almost every topic. (But this can be the next problem).
    Thanks for any help you can offer.
    Miriam

    Hello Miriam Schneidmill,
    You can try this workaround.
    First of all close Robohelp Word
    Go to    C:\Users\Username\AppData\Microsoft\Templates
    and look for RoboHELP.dot and just rename that file extension to old, ggod or anything you wish, say Robohelp.bad.
    Then close this.
    Now try to open Robohelp Word and see are you facing the same issue or not?
    Hope it helps!!!
    Thank you

  • Unable to edit ftpoutboundheader or fileadpateroutboundheader

    Hi,
    I am new bie to oracle soa suite. I was doing an excesise on file and ftp adapters.
    As part of the excersise I have to edit the outbound header properties of the generated wsdl. I am unable to edit the headers.
    1) Can we edit the headers generated by file/ftp adapter wizards ?
    My SOA Suite: is of 10.1.3.4
    Jdev version is 10.1.3.3
    Thanks,
    Arjun.

    Try this blog
    http://middleware1.wordpress.com/category/adapters/page/2/
    cheers
    James

  • Unable to edit the data in z-table

    Hi All,
    I can create new entries in a z-table.
    But i am unable to edit the existing rows of a z-table in the Production server.
    The same can be done in DEV and test servers.
    How to come out of this issue?
    Kindly Help me....
    Regards
    Pavan

    Hi,
    For this you have to maintain table maintenance generator....
    go to se11....your table name
    utilities--->table maintenance generator...
    build a table maintenance generator..and transport the table...
    then only you will be able to edit data in production server...
    Regards
    Debarshi

  • Error in generating HTML output using Central Output Pro Server 5.5

    I am getting the following error while generating HTML output using the Output Pro Server. A new printer was created with the Physical Device as "HTML Template Generation - [html]" and added to the Job.<br /><br />2004/05/07 20:09:53 D:\Program Files\Adobe\Central\Bin\jfmerge: [400](1801) The printer name is invalid.<br /><br />2004/05/07 20:09:53 D:\Program Files\Adobe\Central\Bin\jfmerge: [3015]Error, unable to open printer.<br />2004/05/07 20:09:53 D:\Program Files\Adobe\Central\Bin\jfmerge: [3008]Error, unable to get info about device 'PAYMENTADVICEHTM.html' attached to port '<nil>'.<br />2004/05/07 20:09:53 D:\Program Files\Adobe\Central\Bin\jfmerge: [400](183) Cannot create a file when that file already exists.<br /><br />2004/05/07 20:09:53 D:\Program Files\Adobe\Central\Bin\jfmerge: [2]Error opening output device/file 'PAYMENTADVICEHTM.html'.<br />2004/05/07 20:09:53 D:\Program Files\Adobe\Central\Bin\jfmerge: [400](6) The handle is invalid.<br /><br />2004/05/07 20:09:53 D:\Program Files\Adobe\Central\Bin\jfmerge: [3018]Error ending page on printer.<br />2004/05/07 20:09:53 D:\Program Files\Adobe\Central\Bin\jfmerge: [210]Nothing was printed.<br />2004/05/07 20:09:53 D:\Program Files\Adobe\Central\Bin\jfserver.exe: [314]Agent exit message: [3018]Error ending page on printer.

    If I were to guess, I'd guess that your filename is invalid. How about removing all special characters (spaces, brackets, etc.) from the device name. Also, make sure your form was compiled for HTML.
    I haven't actually used the HTML driver, but these are general things you should do if you have trouble with any Central driver.
    Regards,
    Rob McDougall
    Indigo Pacific

  • Early watch alert - problem with generating word document

    Hello experts,
    since last week I am not able to generate word documents of early watch reports. I have access to 4 different solution manager installations (of customers) where the generation was working without problems but stops since last week.
    SAP gui starts word and the standard word sheet is loaded (SAP early watch start page) but without putting data into the sheet. At the same time I get an error message in the sap gui saying:
    Error during download; read details in long text
    Long text:
    Message no. DSVAS824
    Diagnosis
    The application was unable to write a file to a local directory.
    Procedure
    Often the maximum length of 128 characters for the entire file name, which is defined internally, is exceeded. To avoid this problem, you can change the setting.
    To do this, open Microsoft® Word.
    For English interfaces, choose Tools->Options->File Locations->User templates.
    For German interfaces, choose Extras->Optionen->Speicherort für Dateien->Benutzervorlagen.
    Recommendation: Use directory names with a maximum of 60 characters (For example  C:Program FilesMicrosoft OfficeTemplates)
    I have already maintained the path in word options (we use Word 2007). My colleagues have the same problems.
    Any ideas or hints? Thank you in advance.
    BR, Basti

    Hi all,
    SAP is aware of this problem and is working on a fix.
    For a ***temporary workaround**
    run se38
    RAGS_DSWP_SERV_CONTENT_RESET
    (De-Activate content until  26.05.2011 07:28:06
    Execute
    This will allow you to open the report on a temporary basis.

  • Unable to edit documents in Sharepoint 2013

    Hi,
    unable to edit documents in SP2013.while editing getting the following error.Please guide me on this.
    Thanks In advance

    Hi,
    According to your post, my understanding is that only
    one user could not edit documents in SP2013 with OWA.
    You can use compatibility mode to check whether it works.
    Open IE->Tools->Compatibility View Settings
    You can also add the site into Trusted sites.
    Open the
    IE->Internet Options->Security->Sites->add the site into the Websites, then check whether it works.
    What's more, you can also use other browsers to check whether it works, such as Firefox, Chrome, Internet Explorer 10.
    Check whether the user has permission to the documents.
    Here is a link you can use as a reference:
    http://blogs.architectingconnectedsystems.com/blogs/cjg/archive/2012/07/26/Getting-Office-Web-Apps-2013-and-SharePoint-2013-Working-_2D00_-fixing_3A00_-Sorry_2C00_-you-don_2700_t-have-a-license-to-edit-documents-with-Word-Web-App.-Please-get-in-touch-with-your-helpdesk_2E00_.aspx
    If the issue still exists, please feel free to let me know.
    Best Regards,
    Lisa Chen

  • Unable to edit documents after AVG installation

    I have a dual drive Toshiba laptop, which has been recntly updated from Vista to Windows 7. Windows 7 has taken up most of my C drive, so I have had to put programs onto the other data E drive. The other day I bought AVG ant-virus 2011 and put it onto my computer (data e drive). Since then, even after taking avg off, I am unable to edit documents on office Word or OpenOffice. it seems to be doing it to my external drive (that I have added) as well as now. Its strange since this only started as soon as i used AVG. Any suggestions what the problem could be? How it can be resolved.
    I really need some help, as my computer seems to be slowly dying! Tried to get in contact with AVG but they seem just to be ignoring the problem at the moment.
    Thanks for any help,

    Hi buddy,
    > Its strange since this only started as soon as i used AVG.
    In this case I would contact AVG directly if they can say something about this or if its a known issue. I never heard about this but AVG should know what to do now.
    I dont know what notebook you have but Im pretty sure its a software issue and it seems to be related to AVG

Maybe you are looking for