Unable to Enable Flickr Active Folder

I get the error "Unable to retrieve requested information" when I click Configure Flickr account access on my ix2-200.
My firmware is up to date and I am using Internet Explorer for the web management interface.

I am sorry for the delay but you probably already frond this but I will post it for others. Unfortunately, I do not have any time frame for an update but IE should.
Cannot use or configure a Flickr Active Folder
Unable to configure Flickr Active Folder

Similar Messages

Unable to create the temporary folder. Error 183 when starting Distiller

New information discovered - see end of message!
Full error message is (window title is Acrobat Distiller):
"Unable to create the temporary folder
Error: 183 - cannot create a file when that file already exists."
I have no idea what file or what folder it is referring to. This is on an x86 Vista notebook and the message comes up when starting the notebook and also if you manually start Distiller 8. Updating did not help, nor did turning off the UAC, or running Distiller as Administrator. In the latter case, Distiller will open correctly, but the next time you need to use it, it fails. With the UAC turned off, the behavior is for it to show the Distiller window for a fraction of a second and close immediately. I also gave the user full rights to the C:\Program Files\Adobe folder and lower. Made no difference.
Coincidental with this is that the PDFMOfficeAddIn.dll add-in will not enable in Word - when it is checked, and I hit OK, I get the message:
"The connected state of Office Add-Ins registered in HKEY_LOCAL_MACHINE cannot be changed."
All of this is going on when logged in as an administrator. I have seen folks post about this issue, but no answers that actually fiux the problem, just suggest what I have already tried. Anyone seen this one?
The user is highly mobile, so I am not going to have a chance to work on her computer again until next week.
NEW INFO
I tried removing and reinstalling as administrator and the problem remains. However while trying to troubleshoot, I discovered some more details.
The message is being thrown when acrotray.exe is started as a process in HKLM\Software\Microsoft\Windows\Current Control Set\Run and then tries to run acrodist.exe (which fails, BTW). If I don't let it run there and run acrotray,exe as administrator, then acrodist.exe runs as a process without an error. Additionally, stopping it from running in the registry, and then starting MS Word, the Acrobat add-in does load and even though there is an error thown, it still creates the PDF! I have other Vista 32 notebooks running various Acrobat versions with no problems.
Another key thing I found out is that Acrobat started throwing the error after an HP Scanjet 8400 and its software were installed. I tried explicitly giving the user (already an administrator) full rights to the Acrobat, HP and Read IRIS directories. Did not help the problem. I have to think that there is some interaction there, but sure don't know what it is.

what i did to eliminate that error message, i don't think it eliminated th
e problem but now i can reboot and log in OK, was 2 things:
i went into my system registry and unchecked to start at startup and then disavled it.
i also had to go to each adobe icon, right click, go to properites, and than make all selections set to be administator.

Unable to enable routing in 3750x switch

im unable to enable ip routing in the WS-C3750X-24T-L switch. Tried with SDM prefer routing option but still same issue.
Can some suggest on this?
MOdel: WS-C3750X-24T-L
IOS :flash:c3750e-ipbasek9-mz.122-55.SE5.bin
sh license
Index 1 Feature: ipservices
        Period left: 0 minute 0 second
Index 2 Feature: ipbase
        Period left: 0 minute 0 second
Index 3 Feature: lanbase
        Period left: Life time
        License Type: Permanent
        License State: Active, In Use
        License Priority: Medium
        License Count: Non-Counted
regards,
Ezra.

Index 3 Feature: lanbase        Period left: Life time        License Type: Permanent        License State: Active, In Use
You don't have the license to run routing.

Unable to activate an activity

hi,
hi,
I am unable to activate an activity, I get following error.
FAILURE: The build failed since there already exists a "/gen" folder in the repository with checked-in files.
The "/gen" folder in general MUST NOT BE USED for storage of sources or other files. [result code: 113]
Please check in the repository if there are any checked-in files in the following folder and delete them before repeating the request:
"/usr/sap/ND1/JC01/j2ee/cluster/server0/temp/CBS/433/.B/60550/DCs/aramco.com/it/ca/esales/web/newagrmnt/_comp/gen/default".
How to resolve this ?
Thanks !
seventyros

john,
Thanks ! for reply. But before I saw your reply to this thred, I deleted the folder and the files witin in it, caught this action in an activity and chedked in and now I am able to activate the activities.
The problem that I am facing now is that I am unable to checkout the code, When I try to edit a file in my WD Component, I get a popup (with only cancel button) with the following message.
The operation can only be performed if the following objects are writable:The project is not in the repository, but there are some read-only files
Component Controller com.aramco.sao.had.hmd.dcsa.newagrcomp.NewAgrComp
Read-only: D:\Users\bohramx\Desktop\nwds-extsoa-7.3-SP02-PAT0001-win32\eclipse\workspace.jdi\1\DCs\aramco.com\it\ca\esales\web\newagrmnt\_comp\src\packages\com\aramco\sao\had\hmd\dcsa\newagrcomp\NewAgrComp.wdcontroller
I expect to get a popup with a checkout button.
I am unable to check them out from the DTR perspective also. Please help !
thanks !
seventyros

Unable to enable "Include in Building Default Conditions"

Hi Gurus,
I am unable to enable the "Include in Building Default Conditions" checkbox of Defaulting Rules in OM.
Application : Order Management
Entity: Order Line
Defaulting Seq : 50
Attribute : Bill To Contact (Unable to enable Include in Building Defaulting Conditions)
Could you please help me out in this....
Thanks in Advance.

I was looking at both the technet article for setting up UPD as well as this walk-through:
http://thewolfblog.com/2014/02/24/user-profile-disks-for-rds-2012-2012-r2/
The step after the creation of the disk in this walk-through is to look at who has permission on the .vhdx file, now obviously I am not at that step, but that is what led me down the trail of looking at user permissions, hence my attempts to set up shares
where 'everyone' has full permissions on both the share and the folder.
I have tried to set up multiple shares for the collection, I have tried on two different disks (volumes) on the RDP server itself, I also tried setting up a share on our fileserver (which has all kinds of shares working fine) and the same error occurred
in all cases.
I also found this Technet article:
https://social.technet.microsoft.com/Forums/windowsserver/en-US/d6469d31-6540-4075-a85f-a6e8f7c11e89/user-profile-disk-template-cannot-be-created-when-setting-up-session-collection?forum=winserverTS
So that seems close to what I am looking for, but I have checked and the exact group policy that was causing the above linked issue is not defined in our group policies, but maybe there are other group policies that are causing the issue?

Unable to enable in web services using direct cable from my router

LaserJet Pro printer is working. Unable to enable in web tab error message: Connection error. Check Internet connection.
I have internet connection and don't use proxy server. I have powered off both printer and router. Thank you.

Hello! Could you please provide more information regarding the issue, such as which laserjet you are using? Any additional information will be helpful in resolving your issue. Thanks!
Help the community by marking this post as a solution if it solved your issue!.
If my post helped you in any way, please click the blue KUDOS star under my name! It would mean a great deal.

For some reason, I cannot change my desktop background no matter how many times I delete the "active" folder. It's as if it's locked. Any ideas how I can fix it?

For some reason, I cannot change my desktop background no matter how many times I delete the "active" folder. It's as if it's locked. Any ideas how I can fix it?

Yes it sounds like you have a corrupted preference file.
The setting you make in individual programs get saved to a Preference file in your Users/Library/Preferences folder.
All you have to do is drag out the old file to the desktop, reboot and load the program and the preference file gets rebuilt without your preferences which you reset.
For your case I beleive the preference file is
com.apple.desktop.plist

I have a Verizon IPhone 4 and i can't figure out how to get my ringtones from an app to my iTunes account, it doesn't have a tab for Ringtones! I have tried unplugging it and checking if would show up but it didn't, how do you enable the ringtone folder?

I have a verizon IPhone and i can't figure out how to get my ringtones from the app to iTunes, my account doesn't have a ringtone section in the liRingtone Folder?brary, how do you enable the ringtone folder?

Edit > Preferences. Select the check box for Ringtones, this will add them to the listing in iTunes.
Not sure that really answers your question though.

I have 2 auxillary disk drives for my MacBokk Pro. Time Machine uses one for backup and I use the other for storage, but I am unable to create a new folder or drag and drop files or folders to the aux drive.

I am unable to create a new folder on either of my auxillary disk drives. I can access the files and folders that were there when I transferred one of the drives from a PC. Time machine uses one for backup and I want to use the other to store photos which are large files. An help would be appreciated.

Thanks for the reply. If I reformat the drive will I be able to access the files on it from the MAC. I do not share the drive with a PC. The files were originally created on a PC which I no longer use. I do want to continue to access the files put there by the PC. I would like to not have to copy them over to the MAC hard drive just to use them. The second aux drive is new and works fine because it was formatted by the MAC. I can drag and drop files there and work with just as if they were on the internal drive.

Hi, I upgraded my iphone 4 to iso 5 beta 6, but now it shows "No Service" at top left, and unable to complete your activation. Also tels that this device is not registered as part of the iphone developer programme. How could I fix this problem? Please..?

Hi, I upgraded my iphone 4 (4.3.3) to iso 5 beta 6, but now it shows "No Service" at top left, and unable to complete your activation. Also tells that "this device is not registered as part of the iphone developer programme." How could I fix this problem? Please help me...,

I had a similar occurrence with my just activated iPhone 4.
I had been using the phone for three days when an odd occurrence with voice mail caused me to call tech support. After some discussion they decided to push the activation to my phone (even though I had been using it for three days). When I went to power it back up again I repeatedly got the "no service" notification. I got tech support on a land line and we tried hard reboots and so on. No joy. They told me to take it in to the point of sale and either the SIM card or the phone needed (or both) needed replacing.
I tried one last hard reboot after dinner and the phone came up with service, but I took it in to the point of sale in the morning and they swapped the SIM card out and I went to a Genius Bar appointment to get the phone checked out. It is supposedly OK, but I am still having some problems when syncing it so I will have to visit the Genius Bar again tomorrow about that. At least I have not experienced the "no service" problem in the roughly 24 hours since the SIM card was replaced. (Fingers crossed)

The Flash Player is not running but it is there and it is enabled and Active X is not checked. The Player version is 16.0.0.305. I have the latest ie11 and the latest W8.1. I have used the Adobe tool to delete the Flash and subsequently I have updated or

The Flash Player is not running but it is there and it is enabled and Active X is not checked. The Player version is 16.0.0.305. I have the latest ie11 and the latest W8.1. I have used the Adobe tool to delete the Flash and subsequently I have updated or reloaded Flash using your updater. I have gone into IE options and insured that the settings are supportive of Flash. The Adobe mini Flash test program on your site says it not enabled or Active X is enabled - not true - all is set as it should be. I have gone through your forums but to no avail. I've looked in MS forums but nothing that made any difference. What's going on and what can I do about it?

Try using Firefox. Flash usually works on Firefox when it won't on Safari. I noticed that the Safari does not show the same version as Firefox does. Iwonder if that could be the problem. Safari on the left shows 10.1, Firefox show 10.3

Unable to find any active legal regulations for determination proc. "TEST1"

Hi Guys
This is in regards to a Customs document for a Payment doc
We have just finished the configuration of the Finance integration which will stop blocked partners during the Payment run
Now when we create a Proposal in the Payment run in ECC, the same document gets transferred to GTS, now even though the SPL is active when we check the Log there is a message Unable to find any active legal regulations for determination proc
Upon further investigation of the customs document i found 2 things
1) In the Geography section Country of Departure is populated with US, but the Country of destination is blank, this might be a reason as the Legal regulation checks both the countries and then activate, any idea how i can get the same to populate?
2) If the above population does happen, from which partner type should it come from, as in my customs document only Vendor and Bank is there, in the PO customs document this is being populated properly
Any idea what is wrong here?
Thanks
Carl

Hi Dave
Thanks for answering again.
I have tried activating it at country level, country/country, country/group, Same result in case of all
As i know now since the Country of Destination is missing, it cannot activate the last two, but the same is also not working at country level.
So is there anyway to maybe have some partner function which can populate the Destination country.
Any other advice will be really helpful..
Thanks
Carl

Unable to enable SPDIF??? X-Fi XtremeGamer (non-PRO) w/ Digital I/O Module

JUnable to enable SPDIF? X-Fi XtremeGamer (non-PRO) w/ Digital I/O Module? I recently purchased the Digital I/O module in order to use SPDIF Out on my X-Fi XtremeGamer in order to send audio to my 5. receiver via digital coax.
However after hooking up my Digital I/O module to the flexijack (the one with the red light) I am unable to enable SPDIF.
I read and followed the directions listed here:
<a rel="nofollow" href="http://support.creative.com/kb/ShowArticle.aspx?sid=64440"]http://support.creative.com/kb/ShowArticle.aspx?sid=64440[/url]
The options that they tell you to set are simply are not there on my system.
I am running the most current drivers and console launcher that Creative has on their website.
I have been trying to get it to work both under Windows XP and Windows 7.
I have spent the last 3 hours beating my head on a wall, I hope someone can help me with this...
Thanks in advance for any suggestions!

Ah that's what I am afraid of.
Quoted from the article in your message: "For SB073X series : Supports Microphone-in, Line-in and Optical out connections. On a SB073X series card, this jack does not have the Digital-in function to support the Digital I/O Module. It does however connects to external digital audio devices that accept stereo PCM or compressed Dolby Digital/DTS Bitstream from the Optical output. This will require using a "Toslink to Mini Toslink" cable for connection only."

Lync Hybrid : Unable to write to active directory due to lack of permission

Hello everyone,
I need a little help to troubleshoot a problem I have when moving a user to Lync Online.
My client has a Dirsync and Adfs working perfectly with o365.
My problem is that when I try to move a user to Lync Online I have this error :
Move-CsUser -Identity "Username" -Target sipfed.online.lync.com -credential $cred -hostedmigrationOverrideUrl "https://admin0e.online.lync.com/hostedmigration/hostedmigrationservice.svc"
"Move-CsUser : Unable to write to Active Directory due to lack of permissions"
Like the error said, it's a lack of permission but what kind of permission do I need to make this work ? I've tried to googleit/technetit but no helpful topic found...
Thanks in advance for your help and answers.
Regards,
Adrian TUPPER - ABC Systemes - http://thelyncexperience.blog.com/ If answer is helpful, please hit the green arrow on the left, or mark as answer Thank you

Hi,
Did you solve the issue by adding the account to RTCUniversalUserAdmins group?
To move an on-premises user to your Lync Online tenant, run the following cmdlets in the Lync Server Management Shell, using the administrator credentials for your Microsoft Office 365 tenant. Replace "[email protected]" with the information for the user
that you want to move.
You can try to move the user from Lync Server on premises to Lync online with the help of the link below “Move users to Lync Online”:
http://technet.microsoft.com/en-us/library/jj204969.aspx
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Enabling the Active Dataguard and Real Time Apply

11.2.0.2 on AIX
I gather that , to enable Active Dataguard, you need to execute
STARTUP ; ----not startup mount
ALTER DATABASE RECOVER MANAGED STANDBY DATABASE USING CURRENT LOGFILE DISCONNECT;The above commands will enable both Active Dataguard (Real Time QUERY) and Real Time Apply. Right?
To enable just 'Real Time Apply' , I need to
startup mount
ALTER DATABASE RECOVER MANAGED STANDBY DATABASE USING CURRENT LOGFILE DISCONNECT;Am I right ?
Question on 'WITH SESSION SHUTDOWN' clause
While googling I've come across the following variant with an additonal 'WITH SESSION SHUTDOWN' clause
ALTER DATABASE RECOVER MANAGED STANDBY DATABASE USING CURRENT LOGFILE WITH SESSION SHUTDOWN;What difference does this clause bring ?
Is this claused used to enable Active Dataguard feature or 'Real Time Apply' or both ?

I gather that , to enable Active Dataguard, you need to execute
STARTUP ; ----not startup mount
ALTER DATABASE RECOVER MANAGED STANDBY DATABASE USING CURRENT LOGFILE DISCONNECT;
The above commands will enable both Active Dataguard (Real Time QUERY) and Real Time Apply. Right? Yes, It will be in both recovery / realtime + Read only mode, Also you can use
To enable just 'Real Time Apply' , I need to
startup mount
ALTER DATABASE RECOVER MANAGED STANDBY DATABASE USING CURRENT LOGFILE DISCONNECT;Am I right ?Yes. It will be in just recovery/real time mode.
Question on 'WITH SESSION SHUTDOWN' clause
While googling I've come across the following variant with an additonal 'WITH SESSION SHUTDOWN' clause
ALTER DATABASE RECOVER MANAGED STANDBY DATABASE USING CURRENT LOGFILE WITH SESSION SHUTDOWN;What difference does this clause bring ?
Is this claused used to enable Active Dataguard feature or 'Real Time Apply' or both ?It has multiple options based on startup type
For this example check link of Julian Dyke.
http://juliandyke.wordpress.com/2010/10/14/oracle-11gr2-active-data-guard/

Unable to Enable Flickr Active Folder

Similar Messages

Maybe you are looking for