Unable to get SCCM to install operating system

I am unable to get the operating system to install via SCCM. Here is a list of the steps I have taken so far with no luck:
- Uninstalled WDS and reinstalled
- Removed distribution point and reinstalled
- Recreated boot image, Windows 7 image and driver packages
- Unchecked PXE and checked again
I can get it to boot into PXE and after the password is put in, the packages fail. It starts at the winpe and after recreating the package from scratch it will error at the next package(win 7 image, then driver package). I recreated each package
to get to the next step but it never installs the OS. Is there anything else I can do?
Processing DST00007 SMS_DISTRIBUTION_MANAGER
8/6/2014 3:27:29 PM 5232 (0x1470)
Library path mismatch: \\?\D:\SCCMContentLib, D:\SCCMContentLib
SMS_DISTRIBUTION_MANAGER 8/6/2014 3:27:29 PM
5232 (0x1470)
Removing DST00007 from D:\RemoteInstall\SMSImages
SMS_DISTRIBUTION_MANAGER 8/6/2014 3:27:29 PM
5232 (0x1470)
Removing D:\RemoteInstall\SMSTempBootFiles\DST00007
SMS_DISTRIBUTION_MANAGER 8/6/2014 3:27:29 PM
5232 (0x1470)
Processing DST00031 SMS_DISTRIBUTION_MANAGER
8/6/2014 3:27:29 PM 5232 (0x1470)
Library path mismatch: \\?\D:\SCCMContentLib, D:\SCCMContentLib
SMS_DISTRIBUTION_MANAGER 8/6/2014 3:27:29 PM
5232 (0x1470)
Removing DST00031 from D:\RemoteInstall\SMSImages
SMS_DISTRIBUTION_MANAGER 8/6/2014 3:27:29 PM
5232 (0x1470)
Removing D:\RemoteInstall\SMSTempBootFiles\DST00031
SMS_DISTRIBUTION_MANAGER 8/6/2014 3:27:29 PM
5232 (0x1470)
RegQueryValueExW failed for Software\Microsoft\SMS\DP, INST_WDSAUTO
SMS_DISTRIBUTION_MANAGER 8/6/2014 3:27:30 PM
5232 (0x1470)
RegReadDWord failed; 0x80070002 SMS_DISTRIBUTION_MANAGER
8/6/2014 3:27:30 PM 5232 (0x1470)
Machine is running Windows Server. (NTVersion=0X601, ServicePack=1)
SMS_DISTRIBUTION_MANAGER 8/6/2014 3:27:30 PM
5232 (0x1470)
WDS is INSTALLED SMS_DISTRIBUTION_MANAGER
8/6/2014 3:27:30 PM 5232 (0x1470)
CcmUnregisterWDS SMS_DISTRIBUTION_MANAGER
8/6/2014 3:27:30 PM 5232 (0x1470)
Removing SMSPXE provider. Performing an uninstall
SMS_DISTRIBUTION_MANAGER 8/6/2014 3:27:30 PM
5232 (0x1470)
No need to reset the firewall. SMS_DISTRIBUTION_MANAGER
8/6/2014 3:27:32 PM 5232 (0x1470)
PXE performance counters have been uninstalled
SMS_DISTRIBUTION_MANAGER 8/6/2014 3:27:33 PM
5232 (0x1470)
RegOpenKeyExW failed for SYSTEM\CurrentControlSet\services\WDSServer\Providers\WDSMC\Providers\SMSProvider
SMS_DISTRIBUTION_MANAGER 8/6/2014 3:27:33 PM
5232 (0x1470)
RegReadString failed; 0x80070002 SMS_DISTRIBUTION_MANAGER
8/6/2014 3:27:33 PM 5232 (0x1470)
SMS multicast provider is not installed. SMS_DISTRIBUTION_MANAGER
8/6/2014 3:27:33 PM 5232 (0x1470)
Running: ServerManagerCmd.exe -r WDS SMS_DISTRIBUTION_MANAGER
8/6/2014 3:27:33 PM 5232 (0x1470)
Waiting for the completion of: ServerManagerCmd.exe -r WDS
SMS_DISTRIBUTION_MANAGER 8/6/2014 3:27:33 PM
5232 (0x1470)
Failed to run: ServerManagerCmd.exe -r WDS. Program returned 000003e9
SMS_DISTRIBUTION_MANAGER 8/6/2014 3:27:35 PM
5232 (0x1470)
Running: PowerShell.exe -Command Import-Module ServerManager; Get-WindowsFeature WDS; Remove-WindowsFeature WDS
SMS_DISTRIBUTION_MANAGER 8/6/2014 3:27:35 PM
5232 (0x1470)
Waiting for the completion of: PowerShell.exe -Command Import-Module ServerManager; Get-WindowsFeature WDS; Remove-WindowsFeature WDS
SMS_DISTRIBUTION_MANAGER 8/6/2014 3:27:35 PM
5232 (0x1470)
Failed to run: PowerShell.exe -Command Import-Module ServerManager; Get-WindowsFeature WDS; Remove-WindowsFeature WDS. Program returned 00000001
SMS_DISTRIBUTION_MANAGER 8/6/2014 3:27:44 PM
5232 (0x1470)
Failed to remove WDS. SMS_DISTRIBUTION_MANAGER
8/6/2014 3:27:44 PM 5232 (0x1470)
DP monitoring task is disabed on server DST-SCMP4A.dst.local
SMS_DISTRIBUTION_MANAGER 8/6/2014 3:27:44 PM
5232 (0x1470)
No need to initialize monitoring task on DST-SCMP4A.dst.local
SMS_DISTRIBUTION_MANAGER 8/6/2014 3:27:44 PM
5232 (0x1470)
DP settings have been updated to DST-SCMP4A.dst.local.
SMS_DISTRIBUTION_MANAGER 8/6/2014 3:27:44 PM
5232 (0x1470)
Initialize usage gathering task on DST-SCMP4A.dst.local
SMS_DISTRIBUTION_MANAGER 8/6/2014 3:27:44 PM
5232 (0x1470)
IIS Version 7 SMS_DISTRIBUTION_MANAGER
8/6/2014 3:27:44 PM 5232 (0x1470)
Successfully saved iis settings. SMS_DISTRIBUTION_MANAGER
8/6/2014 3:27:45 PM 5232 (0x1470)
Log Location C:\inetpub\logs\LogFiles\W3SVC1
SMS_DISTRIBUTION_MANAGER 8/6/2014 3:27:45 PM
5232 (0x1470)
Successfully enabled usage gathering on the local distribution point.
SMS_DISTRIBUTION_MANAGER 8/6/2014 3:27:45 PM
5232 (0x1470)
1998-01-01T00:00:00 SMS_DISTRIBUTION_MANAGER
8/6/2014 3:27:45 PM 5232 (0x1470)
DP settings have been updated to DST-SCMP4A.dst.local.
SMS_DISTRIBUTION_MANAGER 8/6/2014 3:27:45 PM
5232 (0x1470)
OS information for the server - 6.1.7601 SMS_DISTRIBUTION_MANAGER
8/6/2014 3:27:46 PM 5232 (0x1470)
for ["Display=\\DST-SCMP4A.dst.local\"]MSWNET:["SMS_SITE=DST"]\\DST-SCMP4A.dst.local\, failed to get a copy of master SCF
SMS_DISTRIBUTION_MANAGER 8/6/2014 3:27:46 PM
5232 (0x1470)
Failed to find the share info for share SMSSIG$ on the DP machine DST-SCMP4A.DST.LOCAL. Error code = 2310
SMS_DISTRIBUTION_MANAGER 8/6/2014 3:27:58 PM
5636 (0x1604)
ConfigurePXE SMS_DISTRIBUTION_MANAGER
8/6/2014 3:28:59 PM 6424 (0x1918)
CcmInstallPXE SMS_DISTRIBUTION_MANAGER
8/6/2014 3:28:59 PM 6424 (0x1918)
RegQueryValueExW failed for Software\Microsoft\SMS\DP, PxeInstalled
SMS_DISTRIBUTION_MANAGER 8/6/2014 3:28:59 PM
6424 (0x1918)
RegReadDWord failed; 0x80070002 SMS_DISTRIBUTION_MANAGER
8/6/2014 3:28:59 PM 6424 (0x1918)
Running: D:\Program Files\Microsoft Configuration Manager\bin\x64\vcredist_x64.exe /q /log "D:\Program Files\Microsoft Configuration Manager\bin\x64\vcredist.log"
SMS_DISTRIBUTION_MANAGER 8/6/2014 3:28:59 PM
6424 (0x1918)
Waiting for the completion of: D:\Program Files\Microsoft Configuration Manager\bin\x64\vcredist_x64.exe /q /log "D:\Program Files\Microsoft Configuration Manager\bin\x64\vcredist.log"
SMS_DISTRIBUTION_MANAGER 8/6/2014 3:28:59 PM
6424 (0x1918)
Found notification for package 'DST00002' SMS_DISTRIBUTION_MANAGER
8/6/2014 3:29:03 PM 5232 (0x1470)
Found notification for package 'DST00003' SMS_DISTRIBUTION_MANAGER
8/6/2014 3:29:03 PM 5232 (0x1470)
Sleep 30 minutes... SMS_DISTRIBUTION_MANAGER
8/6/2014 3:29:03 PM 5644 (0x160C)
Package Thread Limit: 3 SMS_DISTRIBUTION_MANAGER
8/6/2014 3:29:03 PM 5232 (0x1470)
Per package Thread Limit: 5 SMS_DISTRIBUTION_MANAGER
8/6/2014 3:29:03 PM 5232 (0x1470)
Retry interval: 30 SMS_DISTRIBUTION_MANAGER
8/6/2014 3:29:03 PM 5232 (0x1470)
DP upgrade thread Limit: 5 SMS_DISTRIBUTION_MANAGER
8/6/2014 3:29:03 PM 5232 (0x1470)
DP upgrade retry interval: 20 SMS_DISTRIBUTION_MANAGER
8/6/2014 3:29:03 PM 5232 (0x1470)
Used 0 out of 3 allowed processing threads.
SMS_DISTRIBUTION_MANAGER 8/6/2014 3:29:03 PM
5232 (0x1470)
Starting package processing thread, thread ID = 0x17D0 (6096)
SMS_DISTRIBUTION_MANAGER 8/6/2014 3:29:03 PM
5232 (0x1470)
Starting package processing thread, thread ID = 0x181C (6172)
SMS_DISTRIBUTION_MANAGER 8/6/2014 3:29:04 PM
5232 (0x1470)
Run completed for: D:\Program Files\Microsoft Configuration Manager\bin\x64\vcredist_x64.exe /q /log "D:\Program Files\Microsoft Configuration Manager\bin\x64\vcredist.log"
SMS_DISTRIBUTION_MANAGER 8/6/2014 3:29:04 PM
6424 (0x1918)
Created the DP mutex key for WDS. SMS_DISTRIBUTION_MANAGER
8/6/2014 3:29:04 PM 6424 (0x1918)
Finding Wimgapi.Dll SMS_DISTRIBUTION_MANAGER
8/6/2014 3:29:04 PM 6424 (0x1918)
MsiEnumRelatedProducts failed SMS_DISTRIBUTION_MANAGER
8/6/2014 3:29:04 PM 6424 (0x1918)
FindProduct failed; 0x80070103 SMS_DISTRIBUTION_MANAGER
8/6/2014 3:29:04 PM 6424 (0x1918)
MsiEnumRelatedProducts failed SMS_DISTRIBUTION_MANAGER
8/6/2014 3:29:04 PM 6424 (0x1918)
FindProduct failed; 0x80070103 SMS_DISTRIBUTION_MANAGER
8/6/2014 3:29:04 PM 6424 (0x1918)
Found C:\Windows\system32\wimgapi.dll SMS_DISTRIBUTION_MANAGER
8/6/2014 3:29:04 PM 6424 (0x1918)
Wimgapi.dll is already installed. SMS_DISTRIBUTION_MANAGER
8/6/2014 3:29:04 PM 6424 (0x1918)
Path to smsdp.dll is 'D:\Program Files\Microsoft Configuration Manager\bin\x64\SMSDP.DLL'
SMS_DISTRIBUTION_MANAGER 8/6/2014 3:29:04 PM
6424 (0x1918)
STATMSG: ID=2300 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=DST-SCMP4A.dst.local SITE=DST PID=2552 TID=6172 GMTDATE=Wed Aug 06 19:29:04.421 2014 ISTR0="Configuration Manager Client Upgrade Package" ISTR1="DST00003"
ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=400 AVAL0="DST00003"
SMS_DISTRIBUTION_MANAGER 8/6/2014 3:29:04 PM
6172 (0x181C)
No action specified for the package DST00003.
SMS_DISTRIBUTION_MANAGER 8/6/2014 3:29:04 PM
6172 (0x181C)
Start adding package to server ["Display=\\DST-SCMP4A.dst.local\"]MSWNET:["SMS_SITE=DST"]\\DST-SCMP4A.dst.local\...
SMS_DISTRIBUTION_MANAGER 8/6/2014 3:29:04 PM
6172 (0x181C)
Will wait for 1 threads to end. SMS_DISTRIBUTION_MANAGER
8/6/2014 3:29:04 PM 6172 (0x181C)
The distribution point is on the siteserver and the package is a content type package. There is nothing to be copied over.
SMS_DISTRIBUTION_MANAGER 8/6/2014 3:29:04 PM
2752 (0x0AC0)
The distribution point ["Display=\\DST-SCMP4A.dst.local\"]MSWNET:["SMS_SITE=DST"]\\DST-SCMP4A.dst.local\ is not installed or upgraded yet.
SMS_DISTRIBUTION_MANAGER 8/6/2014 3:29:04 PM
2752 (0x0AC0)
Error occurred. Performing error cleanup prior to returning.
SMS_DISTRIBUTION_MANAGER 8/6/2014 3:29:04 PM
2752 (0x0AC0)
DP thread with array index 0 ended. SMS_DISTRIBUTION_MANAGER
8/6/2014 3:29:04 PM 6172 (0x181C)
DP thread with thread handle 0000000000002750 and thread ID 2752 ended.
SMS_DISTRIBUTION_MANAGER 8/6/2014 3:29:04 PM
6172 (0x181C)
PXE performance counters have been initialized
SMS_DISTRIBUTION_MANAGER 8/6/2014 3:29:04 PM
6424 (0x1918)
Machine is running Windows Server. (NTVersion=0X601, ServicePack=1)
SMS_DISTRIBUTION_MANAGER 8/6/2014 3:29:04 PM
6424 (0x1918)
WDS is INSTALLED SMS_DISTRIBUTION_MANAGER
8/6/2014 3:29:04 PM 6424 (0x1918)
WDS service is already installed. SMS_DISTRIBUTION_MANAGER
8/6/2014 3:29:04 PM 6424 (0x1918)
Machine is running Windows Server. (NTVersion=0X601, ServicePack=1)
SMS_DISTRIBUTION_MANAGER 8/6/2014 3:29:04 PM
6424 (0x1918)
WDS is INSTALLED SMS_DISTRIBUTION_MANAGER
8/6/2014 3:29:04 PM 6424 (0x1918)
Machine is running Windows Server. (NTVersion=0X601, ServicePack=1)
SMS_DISTRIBUTION_MANAGER 8/6/2014 3:29:04 PM
6424 (0x1918)
Setting TFTP config key as: System\CurrentControlSet\Services\WDSSERVER\Providers\WDSTFTP
SMS_DISTRIBUTION_MANAGER 8/6/2014 3:29:04 PM
6424 (0x1918)
Configuring TFTP read filters SMS_DISTRIBUTION_MANAGER
8/6/2014 3:29:04 PM 6424 (0x1918)
SetupComplete is set to 1 SMS_DISTRIBUTION_MANAGER
8/6/2014 3:29:04 PM 6424 (0x1918)
RegQueryValueExW failed for Software\Microsoft\Windows\CurrentVersion\Setup, REMINST
SMS_DISTRIBUTION_MANAGER 8/6/2014 3:29:04 PM
6424 (0x1918)
RegReadDWord failed; 0x80070002 SMS_DISTRIBUTION_MANAGER
8/6/2014 3:29:04 PM 6424 (0x1918)
REMINST not set in WDS SMS_DISTRIBUTION_MANAGER
8/6/2014 3:29:04 PM 6424 (0x1918)
WDS is Configured SMS_DISTRIBUTION_MANAGER
8/6/2014 3:29:04 PM 6424 (0x1918)
WDSServer is STARTED SMS_DISTRIBUTION_MANAGER
8/6/2014 3:29:25 PM 6424 (0x1918)
Running: WDSUTIL.exe /Initialize-Server /REMINST:"D:\RemoteInstall"
SMS_DISTRIBUTION_MANAGER 8/6/2014 3:29:25 PM
6424 (0x1918)
Waiting for the completion of: WDSUTIL.exe /Initialize-Server /REMINST:"D:\RemoteInstall"
SMS_DISTRIBUTION_MANAGER 8/6/2014 3:29:25 PM
6424 (0x1918)
Failed to run: WDSUTIL.exe /Initialize-Server /REMINST:"D:\RemoteInstall". Program returned c1030105
SMS_DISTRIBUTION_MANAGER 8/6/2014 3:29:26 PM
6424 (0x1918)
Machine is running Windows Server. (NTVersion=0X601, ServicePack=1)
SMS_DISTRIBUTION_MANAGER 8/6/2014 3:29:26 PM
6424 (0x1918)
No need to configure the firewall SMS_DISTRIBUTION_MANAGER
8/6/2014 3:29:26 PM 6424 (0x1918)
Processing DST00007 SMS_DISTRIBUTION_MANAGER
8/6/2014 3:29:26 PM 6424 (0x1918)
Library path mismatch: \\?\D:\SCCMContentLib, D:\SCCMContentLib
SMS_DISTRIBUTION_MANAGER 8/6/2014 3:29:26 PM
6424 (0x1918)
Expanding D:\SCCMContentLib\FileLib\B9BE\B9BE214D055D8D5B1C11ABC1844028CB8FB5888F731799BE4374C4189C691394 from package DST00007
SMS_DISTRIBUTION_MANAGER 8/6/2014 3:29:26 PM
6424 (0x1918)
Finding Wimgapi.Dll SMS_DISTRIBUTION_MANAGER
8/6/2014 3:29:26 PM 6424 (0x1918)
MsiEnumRelatedProducts failed SMS_DISTRIBUTION_MANAGER
8/6/2014 3:29:26 PM 6424 (0x1918)
FindProduct failed; 0x80070103 SMS_DISTRIBUTION_MANAGER
8/6/2014 3:29:26 PM 6424 (0x1918)
MsiEnumRelatedProducts failed SMS_DISTRIBUTION_MANAGER
8/6/2014 3:29:26 PM 6424 (0x1918)
FindProduct failed; 0x80070103 SMS_DISTRIBUTION_MANAGER
8/6/2014 3:29:26 PM 6424 (0x1918)
Found C:\Windows\system32\wimgapi.dll SMS_DISTRIBUTION_MANAGER
8/6/2014 3:29:26 PM 6424 (0x1918)
SetNamedSecurityInfo() failed. SMS_DISTRIBUTION_MANAGER
8/6/2014 3:29:26 PM 6424 (0x1918)
SetObjectOwner() failed. 0x80070003. SMS_DISTRIBUTION_MANAGER
8/6/2014 3:29:26 PM 6424 (0x1918)
SetFileSecurity() failed. SMS_DISTRIBUTION_MANAGER
8/6/2014 3:29:26 PM 6424 (0x1918)
Expanding DST00007 to D:\RemoteInstall\SMSImages
SMS_DISTRIBUTION_MANAGER 8/6/2014 3:29:26 PM
6424 (0x1918)
Processing DST00031 SMS_DISTRIBUTION_MANAGER
8/6/2014 3:29:32 PM 6424 (0x1918)
Library path mismatch: \\?\D:\SCCMContentLib, D:\SCCMContentLib
SMS_DISTRIBUTION_MANAGER 8/6/2014 3:29:32 PM
6424 (0x1918)
Expanding D:\SCCMContentLib\FileLib\9E37\9E37D6A7AAF833CBE9C391243489E8A2C6FD2870747480417D4FF66F1980B07D from package DST00031
SMS_DISTRIBUTION_MANAGER 8/6/2014 3:29:32 PM
6424 (0x1918)
Finding Wimgapi.Dll SMS_DISTRIBUTION_MANAGER
8/6/2014 3:29:32 PM 6424 (0x1918)
MsiEnumRelatedProducts failed SMS_DISTRIBUTION_MANAGER
8/6/2014 3:29:32 PM 6424 (0x1918)
FindProduct failed; 0x80070103 SMS_DISTRIBUTION_MANAGER
8/6/2014 3:29:32 PM 6424 (0x1918)
MsiEnumRelatedProducts failed SMS_DISTRIBUTION_MANAGER
8/6/2014 3:29:32 PM 6424 (0x1918)
FindProduct failed; 0x80070103 SMS_DISTRIBUTION_MANAGER
8/6/2014 3:29:32 PM 6424 (0x1918)
Found C:\Windows\system32\wimgapi.dll SMS_DISTRIBUTION_MANAGER
8/6/2014 3:29:32 PM 6424 (0x1918)
SetNamedSecurityInfo() failed. SMS_DISTRIBUTION_MANAGER
8/6/2014 3:29:32 PM 6424 (0x1918)
SetObjectOwner() failed. 0x80070002. SMS_DISTRIBUTION_MANAGER
8/6/2014 3:29:32 PM 6424 (0x1918)
SetFileSecurity() failed. SMS_DISTRIBUTION_MANAGER
8/6/2014 3:29:32 PM 6424 (0x1918)
Expanding DST00031 to D:\RemoteInstall\SMSImages
SMS_DISTRIBUTION_MANAGER 8/6/2014 3:29:32 PM
6424 (0x1918)
CcmInstallPXE: Deleting the DP mutex key for WDS.
SMS_DISTRIBUTION_MANAGER 8/6/2014 3:29:40 PM
6424 (0x1918)

Hi,
Have you verified WDS service is running?
According to the log, please check the registry "SYSTEM\CurrentControlSet\services\WDSServer\Providers\WDSMC\Providers\SMSProvider" on the DP.
Please make sure all the prerequisites for DP have met.
A similar thread:
http://social.technet.microsoft.com/Forums/en-US/cea6e674-962b-427a-841e-a91b5e68136f/issue-setting-up-pxe-enabled-distribution-point-for-sccm-2012?forum=configmanagerdeployment
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

Can i revert back to the factory installed operating system on my ipod 5th gen

Can i revert back to the factory installed operating system on my ipod 5th gen

Where did you get your 5th gen iPod touch? The yare only supposed to be shipped/available in October?

Mac won't update software or access iTunes shop. Message comes up with 'not connected to the net. Check connections' error. I still have internet access. Changed my Apple ID but no result. Repaired permissions and re-installed operating system.

Mac won't update software or access iTunes shop. Message comes up with 'not connected to the net. Check connections' error. I still have internet access. Changed my Apple ID but no result. Repaired permissions and re-installed operating system.

It sounds like you may have multiple problems, but none of them are likely to be caused by malware.
First, the internet-related issues may be related to adware or a network compromise. I tend to lean more towards the latter, based on your description of the problem. See:
http://www.adwaremedic.com/kb/baddns.php
http://www.adwaremedic.com/kb/hackedrouter.php
If investigation shows that this is not a network-specific issue, then it's probably adware. See my Adware Removal Guide for help finding and removing it. Note that you mention AdBlock as if it should have prevented this, but it's important to understand that ad blockers do not protect you against adware in any way. Neither would any kind of anti-virus software, which often doesn't detect adware.
As for the other issues, it sounds like you've got some serious corruption. I would be inclined to say it sounds like a failing drive, except it sounds like you just got it replaced. How did you get all your files back after the new drive was installed?
(Fair disclosure: I may receive compensation from links to my sites, TheSafeMac.com and AdwareMedic.com, in the form of buttons allowing for donations. Donations are not required to use my site or software.)

MDT 2012 \ WinPE 3.0 Slow Install Operating System

I have an issue with a custom wim I have incorporated into my Task sequence. When I use a custom Wim, at the point where the MDT Tasksequence begins to "Install Operating System" it slows down to a crawl. What previously took 5-10 minutes on a
previous wim, is now taking 30-50. When the "Install Operating System" task begins, it starts a at a very decent rate, you can see the percentage or time increasing/changing every few seconds with out issue, but when it gets to 30% completion, it
starts to slow down dramatically. Eventually it will get to 100% Completion, where it will stay for the next 5 minutes, at which point it will apply the unattend.xml which will also take a very very long time to complete.
Once it reboots from applying the Unattend.xml everything runs normal.
My Setup:
I am using MDT 2012 - with WinPE3.0
To create my Custom Wim I did the following:
I created a brand new standard tasksequence, to deploy an OS to a machine, install updates then sysprep and capture to a wim. I set a custom variable in the tasksequence which set DoCapture=Yes. This allowed me to Capture the Operating system after the windows
updates were done without having to do any additional steps. I then imported the Image into the operating systems section of my MDT Deployment share, and incorporated it into my previous Tasksequence.
I have also noticed that the size of the wim file I created is about 1.5 gigs larger than my previous wim.
Steps I've Taken for remediation:
I've tried rebuilding my boot.wim several times.
Increased the scratch size from 32 -> 64 -> 256 -> 512MB
Removed unnecessary drivers from the boot.wim
Any ideas you guys might have with regard to getting my Install Operating System phase to speed up to normal speeds with be greatly appreciated. Is there an extra step with the install.wim that I importing into MDT that I should be doing?

I completed a robocopy in the full blown OS to download the 4.9g wim, it takes 1 minute and 36 seconds. It does have gigabit connection active in the full blown os.
When I am running WinPE, Task Manager is showing my local area connection is running at 1Gbps.
Another discrepancy I'm noticing is that @ 12:16:04 [Line1801] the task sequence finishes apply the wim. It takes 10 minutes for it to start the next task found on Line 1807. Any Ideas on why it taking so long to apply the bootsect.exe
command?
I did disable the "Apply Patches" task, and it did remove 20 minutes by not applying those patches. Thank you for that suggestion.
MCSA Server 2008R2 \ 2012 MCSE Server Infrastructure CCNA

MDT 2012 - Failed to Run Action: Install Operating System Access is Denied (Error: 0000005; Source: Windows)

Unable to deploy any image with WIM file. Vanilla or Custom Image gives the following error:
ZTI Error – Unhandled error returned by LTIApply: invalid procedure call or argument (5)
Litetouch deployment failed, Return code = -2147467259 0x80004005
Failed to run action: Install Operating System.
Access is denied (Error: 00000005; Source: Windows)
Tried Giving Everyone Full rights to the deployment share
Rebooted Server
Updated Deployment Share
Any ideas would be great!
Thanks
Rick
Richard Ray

https://skydrive.live.com/redir?resid=57E5397C8C507949!129&authkey=!AJDCfz7nGblrdQE&ithint=folder%2c.log
Please try this link.
Kris Da San Martino
The SMSTS.log shows
Expand a string: WinPEandFullOS TSManager 2/18/2014 1:35:48 PM 1508 (0x05E4)
Executing command line: cscript.exe "%SCRIPTROOT%\LTIApply.wsf" TSManager 2/18/2014 1:35:48 PM 1508 (0x05E4)
Process completed with exit code 5 TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
!--------------------------------------------------------------------------------------------! TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
Failed to run the action: Install Operating System.
Access is denied. (Error: 00000005; Source: Windows) TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
Sending status message . . . TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
Executing in non SMS standalone mode. Ignoring send a task execution status message request TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
Set a global environment variable _SMSTSLastActionRetCode=5 TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
Set a global environment variable _SMSTSLastActionSucceeded=false TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
Clear local default environment TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
Let the parent group (Install) decides whether to continue execution TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
The execution of the group (Install) has failed and the execution has been aborted. An action failed.
Operation aborted (Error: 80004004; Source: Windows) TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
Failed to run the last action: Install Operating System. Execution of task sequence failed.
Access is denied. (Error: 00000005; Source: Windows) TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
Sending status message . . . TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
Executing in non SMS standalone mode. Ignoring send a task execution status message request TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
Execution::enExecutionFail != m_eExecutionResult, HRESULT=80004005 (e:\nts_sms_fre\sms\client\tasksequence\tsmanager\tsmanager.cpp,767) TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
Task Sequence Engine failed! Code: enExecutionFail TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
**************************************************************************** TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
Task sequence execution failed with error code 80004005 TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)

Auto Join Domain using WAIK without install Operating System Image

Hi all, i have a question.
In my Environment, i have requirement like this :
If user get new laptop with operating system already installed,
is it possible to automatic join domain when user plug in LAN cable to their computer?
I already explore about this and i found WAIK can help me to auto join domain, but i must install that OS image too.
I just want to auto join domain, is it possible to skip install OS image process when i using WAIK?
Can i get a solution for my requirement?
Thanks for help!
Best Regards,
Henry Stefanus

http://technet.microsoft.com/en-us/library/offline-domain-join-djoin-step-by-step(v=ws.10).aspx
Help your self :)
UMESH DEUJA MCP,MCTS,MCSA,CCNA

When the keyboard is unplugged I get "Error 1962: No Operating system found."

I have a new Lenovo ThinkServer TS130 1105B2U. It has a Core i3-3220 and 4GB of memory. SATA 0 and SATA 1 each have a 250GB HDD configured to mirror each other using RAID1. I just finished installing Windows 7 Pro and drivers. However, I have discovered that when I try to reboot the machine with my USB keyboard disconnected I get "Error 1962: No operating system found. Press any key to repeat boot sequence." When I reconnect the USB keyboard and reboot the machine, Windows 7 Pro boots like expected. Why can't it find the operating system if the keyboard is unplugged?

This is fixed in BIOS version 20B.
You can use the following link to update BIOS from witin Windows.
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/thinkservers/bios_ts130_51a20b.exe
The Readme is:
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/thinkservers/ts130_51a20b_windows.txt

Issue with step "Installing Operating System"

Hello,
Just wondering if anyone can help me as I've been pulling my hair out for a week over this one. I had my task sequences working fine a couple weeks back and now they fail with this error:
The execution of the group (Install) has failed and the execution has been aborted. An action failed.
Operation aborted (Error: 80004004; Source: Windows)
TSManager 20/03/2015 16:29:21
1276 (0x04FC)
Failed to run the last action: Install Operating System. Execution of task sequence failed.
Incorrect function. (Error: 00000001; Source: Windows)
TSManager 20/03/2015 16:29:21
1276 (0x04FC)
Execution::enExecutionFail != m_eExecutionResult, HRESULT=80004005 (e:\nts_sms_fre\sms\client\tasksequence\tsmanager\tsmanager.cpp,767)
TSManager 20/03/2015 16:29:21
1276 (0x04FC)
Task Sequence Engine failed! Code: enExecutionFail
TSManager 20/03/2015 16:29:21
1276 (0x04FC)
Task sequence execution failed with error code 80004005
TSManager 20/03/2015 16:29:21
1276 (0x04FC)
I've googled around and tried a lot of 'fixes' I've found from various sites but nothing seems to have remedied this issue. The only thing that changed (That I can think of) is the IP of the VM was changed to a different one. This seems to be when it started
failing. All steps leading up to this point seem to work fine. Does anyone have any sugggestions? This is on a newly built, Hyper-v, server 2012 R2, MDT 2013 setup.
Much Appreciated..!

It would be helpful to get the bdd.log files to debug the issue.
Can you upload them to a public site like onedrive and share the link here?
How to find the right MDT log files (bdd.log/smsts.log) to debug
problems.
Keith Garner - Principal Consultant [owner] -
http://DeploymentLive.com

I have a mac book pro that i bought in late 2009. My current software is snow leopard version 10.5.8. I would like to get the new lion operating system but I cant without first getting the latest version of snow leopard. it doesnt show on software updat

I have a mac book pro that i bought in late 2009. My current software is snow leopard version 10.5.8. I would like to get the new lion operating system but I cant without first getting the latest version of snow leopard. however when I go to update my software it doesnt show that any update is available.

10.5.8 is Leopard, not Snow Leopard. You need the Snow Leopard DVD;
You can get it only by phone now from Apple.
In the US, call 1-800-MY-APPLE and ask for a sales assistant. Last quoted price was $19.99 for the single-user and $29.99 for the family licence.
For other countries, check here; http://support.apple.com/kb/HE57
Don't forget to ask for Sales; the tech support guys can't help.
If you want Lion, rather than Mountain Lion, the same Sales team can give you a download code to use at the Mac AppStore.
To get the App Store, you need to update your new Snow Leopard from 10.6.3 (which is the version on the installer) to 10.6.8 with the combo update; http://support.apple.com/kb/DL1399
Be warned that the upgrades will render a lot of older software unusable, and will need new drivers for printers and scanners in all likelihood.

Hi all, I am trying to update my Ipad OS tO 5.1, but was unable, keep getting error in installing message? Please advice. Thx

Hi all, I am trying to update my ipad OS to 5.1, but was unable, keep getting error in installing message. Please advices. Thx

Try this - Disable your firewall and anitvirus software temporarily. Then download and install the iOS update.
After you install iOS 5.x, the next update can be installed when connecred via wireless.
 Cheers, Tom

Unable to run a Batch File Operating System Command

Using XI 3.0, I am unable to run a Batch File Operating System Command After Message Processing.
My Batch file:
gpg -se -r BOA3RSKY --armor --passphrase-fd 0 %1 < C:\Progra~1\GNU\GnuPG\gpgin
My Command Line (ID scenario)
exec "cmd.exe /c C:\Progra~1\GNU\GnuPG\boagpg.bat %F"
If I execute
exec "cmd.exe /c type C:\Progra~1\GNU\GnuPG\boagpg.bat >xis.txt"
It displays the contents of boagpg.bat file in xis.txt.
I just don't understand why when I run the batch file, I would expect an %F.asc encrypted file in the same directory as the %F unencrypted file.
Any ideas?
or will I need Basis to create commands that will allow me to run GPG from XI Command Line?

Check this links if its helpful
http://help.sap.com/saphelp_nw04/helpdata/en/bb/c7423347dc488097ab705f7185c88f/frameset.htm
/people/sap.user72/blog/2004/01/30/command-line-help-utility
Check this thread a similar problem
Process Integration (PI) & SOA Middleware
Note 841704 - XI File & JDBC Adapter: Operating system command
http://service.sap.com/sap/support/notes/841704
Try to see the below links
/people/michal.krawczyk2/blog/2005/08/17/xi-operation-system-command--error-catching
OS Command on FTP
OS command line script - Need help
FTP - Run OS Command before file processing
Note: reward points if solution found helpfull
Regards
Chandrakanth.k

Re-install operating system on Compaq NC6400

Must I use an external DVD optical drive to recover/re-install operating system on Compaq NC6400? If an external drive is required, is it possible to use an external hard drive? And, will a simple copying the files off of the CD and onto the hard drive work as the transfer?

Hi:
As far as I know you need to install using a CD/DVD drive. I would suggest if your CD/DVD drive doesn't work, you can use an external one.
I don't think you can copy the CD and to an external HDD and boot from that to install.
Paul

How to install operating system on T61 from recovery folder.

Hi,
I bought T61 lenovo laptop on October 2007. It's almost more than one year. I didn't upgrade my warranty due to some reasons.
Now my system infected with virus. I would like to install operating system (i.e windows XP).
When I bought this, I didn't receive any operating system Recovery CD. I came to know that...... they provide recovery folder in the system itself. with that recovery we can install operating system.
Could you pls let me know the path for recovery folder and let me know the installation procedure step by step.
Thanks in advance
Raghu

Restart the computer, When you see the IBM/Lenovo splash screen press the blue Thinkvantage button. From there you can select recover my computer or restore to factory condition (depends on software version). Follow steps to restore.When completed make a set of recovery discs. If possible do this before restoring. The discs will be necessary if something goes wrong.
To make the discs click Start/Thinkvantage/Create recovery set. (the names vary with XP or Vista)
T60 2623-D7U, 3 GB Ram. Dual boot XP and Linux Mint.
T400 2765-T7U Windows 7
Registered Linux User #160145
FYI: I am not employed by Lenovo

Unable to install operating system

I have a G4 Powerbook 1.5 ghz that I have been using for 1 1/2 years. All of a sudden my computer started acting slow and then I had a screen come up telling me to turn off my computer. After trying to restart, my computer is unable to do anything so I put in the Mac OS X Install DVD and run disk utility and it is unable to repair the hard drive. Then, I erased my system and started fresh and this worked for about a week and then I started having the same problem and I repeated the erase and install and it did this again. Now, I erased the system for the third time. I am trying to install the operating system again and have attempted this numerous times over the last few days and cannot get throught the whole installation. It just freezes while "Processing BSD Subsystem" in the installation. Any suggestions?
15" powerbook g4 1.5 ghz Mac OS X (10.3)

When you erased the hard drive, did this include reformatting the hard drive selecting HFS+ (or extended) with Journaling enabled?
Your hard drive may be failing or has failed.
When booting from the Panther install disc and navigating to Disk Utility via the Installer menu bar, what does the S.M.A.R.T. status indicate (at the bottom of the First Aid window) when selecting the hard drive at the very top of the drives and volumes window? When selecting the hard drive (not Macintosh HD which is the hard drive boot volume) includes the hard drive capacity in GB and an abbreviation for the hard drive manufacturer.
If the S.M.A.R.T. status for the hard drive does not indicate "Verified", your hard drive is failing or has failed which will require replacing the hard drive.

New iMac, migrated from macbook and now mail won't work. Tried re-installing operating system, still doesn't work. Can anyone help me to get mail working? thanks

I just bought a new iMac and I thought that it would be simple to migrate from my MacBook.
I have a time machine back-up so I decided to migrate using that. Everything seemed to instal pretty well with the exception of mail. To begin with I had 2 mail icons, then I started to read some forums and checked that i had the one I wanted in the applications folder, deleted the other and then downloaded the new operating system. Mail had to be force quit first and even when the download was complete Mail still wouldn't open or run. The only thing I can do is compose a new message, but I can't see my inbox at all.
It's really frustrating and I would love to know in a simple step by step guide how to get mail up and running with my existing migrated emails in it.
If anyone can give me some advice that would be great.
thanks in advance.
H

Problems such as yours are sometimes caused by files that should belong to you but are locked or have wrong permissions. This procedure will check for such files. It makes no changes and therefore will not, in itself, solve your problem.
First, empty the Trash.
Triple-click the line below to select it, then copy the selected text to the Clipboard (command-C):
find ~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 -o -acl $ 2> /dev/null | wc -l
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
The output of this command, on a line directly below what you entered, will be a number such as "41." Please post it in a reply.

Unable to get SCCM to install operating system

Similar Messages

Maybe you are looking for