Unable to invoke report by run_report_object
Hi All:
I am trying to invoke the report by following coding,
DECLARE
v_rep varchar2(100);
repid REPORT_OBJECT;
BEGIN
repid := find_report_object('test_rep');
v_rep := RUN_REPORT_OBJECT(repid);
END;
System always return following error:
FRM-41219: Cannot find report: Invalid ID.
FRM-40738: Argument 1 to builtin RUN_REPORT_OBJECT cannot be null.
I also changed the code by specifying the exact location and path of the report but system returned same error:
repid := find_report_object('c:\test_rep');
What could be the wrong?
Hassan
hy, well done,
for PDF report you must set :
SET_REPORT_OBJECT_PROPERTY(v_repid,REPORT_DESTYPE,FILE);
sET_REPORT_OBJECT_PROPERTY(v_repid,REPORT_DESNAME,'c:\temp\test_rep.PDF');
SET_REPORT_OBJECT_PROPERTY(v_repid,REPORT_DESFORMAT,'PDF');
for 6i,
Regards
Similar Messages
-
Unable to launch Report Builder 3.0
I am running Reporting Services 2012 in Sharepoint integrated mode. I'm using Sharepoint 2010. My server is located in the US. Both my overseas and US users are unable to launch Report Builder but the errors are different.
Overseas user:
Following errors were detected during this operation.
* [05/4/2012 7:43:26 PM] System.Deployment.Application.InvalidDeploymentException (ManifestLoad)
- Exception occurred loading manifest from file MSReportBuilder.exe: the manifest may not be valid or the file could not be opened.
- Source: System.Deployment
- Stack trace:
at System.Deployment.Application.Manifest.AssemblyManifest.ManifestLoadExceptionHelper(Exception exception, String filePath)
at System.Deployment.Application.Manifest.AssemblyManifest.LoadFromInternalManifestFile(String filePath)
at System.Deployment.Application.DownloadManager.ProcessDownloadedFile(Object sender, DownloadEventArgs e)
at System.Deployment.Application.FileDownloader.DownloadModifiedEventHandler.Invoke(Object sender, DownloadEventArgs e)
at System.Deployment.Application.SystemNetDownloader.DownloadSingleFile(DownloadQueueItem next)
at System.Deployment.Application.SystemNetDownloader.DownloadAllFiles()
at System.Deployment.Application.FileDownloader.Download(SubscriptionState subState)
at System.Deployment.Application.DownloadManager.DownloadDependencies(SubscriptionState subState, AssemblyManifest deployManifest, AssemblyManifest appManifest, Uri sourceUriBase, String targetDirectory, String group, IDownloadNotification
notification, DownloadOptions options)
at System.Deployment.Application.ApplicationActivator.DownloadApplication(SubscriptionState subState, ActivationDescription actDesc, Int64 transactionId, TempDirectory& downloadTemp)
at System.Deployment.Application.ApplicationActivator.InstallApplication(SubscriptionState& subState, ActivationDescription actDesc)
at System.Deployment.Application.ApplicationActivator.PerformDeploymentActivation(Uri activationUri, Boolean isShortcut, String textualSubId, String deploymentProviderUrlFromExtension, BrowserSettings browserSettings, String& errorPageUrl)
at System.Deployment.Application.ApplicationActivator.ActivateDeploymentWorker(Object state)
--- Inner Exception ---
System.Deployment.Application.DeploymentException (InvalidManifest)
- Cannot load internal manifest from component file.
- Source:
- Stack trace:
US user:
Following errors were detected during this operation.
* [5/4/2012 11:03:17 AM] System.Runtime.InteropServices.COMException
- Failed to load the runtime. (Exception from HRESULT: 0x80131700)
- Source: System.Deployment
- Stack trace:
at System.Deployment.Application.NativeMethods.GetRequestedRuntimeInfo(String pExe, String pwszVersion, String pConfigurationFile, UInt32 startupFlags, UInt32 runtimeInfoFlags, StringBuilder pDirectory, UInt32 dwDirectory, UInt32& dwDirectoryLength,
StringBuilder pVersion, UInt32 cchBuffer, UInt32& dwLength)
at System.Deployment.Application.Win32InterOp.SystemUtils.CheckSupportedImageAndCLRVersions(String path)
at System.Deployment.Application.SubscriptionStore.CheckApplicationPayload(CommitApplicationParams commitParams)
at System.Deployment.Application.SubscriptionStore.CommitApplication(SubscriptionState& subState, CommitApplicationParams commitParams)
at System.Deployment.Application.ApplicationActivator.InstallApplication(SubscriptionState& subState, ActivationDescription actDesc)
at System.Deployment.Application.ApplicationActivator.PerformDeploymentActivation(Uri activationUri, Boolean isShortcut, String textualSubId, String deploymentProviderUrlFromExtension, BrowserSettings browserSettings, String& errorPageUrl)
at System.Deployment.Application.ApplicationActivator.ActivateDeploymentWorker(Object state)Hi,
My issue is not resolved as i am also facing same issue. OS of the server is windows 2012, .net 4.5 is installed so don't need to install .net 4 separately. Here i am giving error details
PLATFORM VERSION INFO
Windows : 6.2.9200.0 (Win32NT)
Common Language Runtime
: 4.0.30319.18408
System.Deployment.dll
: 4.0.30319.17929 built by: FX45RTMREL
clr.dll : 4.0.30319.18408 built by: FX451RTMGREL
dfdll.dll : 4.0.30319.17929 built by: FX45RTMREL
dfshim.dll : 4.0.41209.0 (Main.041209-0000)
SOURCES
Deployment url
: http://xxx/sites/xxxx/_vti_bin/ReportBuilder/ReportBuilder_3_0_0_0.application?SaveLocation=http%3a%2f%2fxxx%2fsites%2fxxxx%2fDocuments
Server
: Microsoft-IIS/8.0
X-Powered-By
: ASP.NET
X-AspNet-Version: 4.0.30319
Application url
: http://xxx/sites/xxxx/_vti_bin/ReportBuilder/RptBuilder_3/MSReportBuilder.exe.manifest
Server
: Microsoft-IIS/8.0
X-Powered-By
: ASP.NET
X-AspNet-Version: 4.0.30319
IDENTITIES
Deployment Identity
: ReportBuilder_3_0_0_0.application, Version=11.0.3000.0, Culture=neutral, PublicKeyToken=c3bce3770c238a49, processorArchitecture=x86
APPLICATION SUMMARY
* Online only application.
* Trust url parameter is set.
ERROR SUMMARY
Below is a summary of the errors, details of these errors are listed later in the log.
* Activation of http://xxx/sites/xxxx/_vti_bin/ReportBuilder/ReportBuilder_3_0_0_0.application?SaveLocation=http%3a%2f%2fxxx%2fsites%2xxxx%2fDocuments resulted in exception. Following failure messages were detected:
+ Application manifest has either a different computed hash than the one specified or no hash specified at all.
+ File, MSReportBuilder.exe.manifest, has a different computed hash than specified in manifest.
COMPONENT STORE TRANSACTION FAILURE SUMMARY
No transaction error was detected.
WARNINGS
There were no warnings during this operation.
OPERATION PROGRESS STATUS
* [8/25/2014 3:37:07 AM] : Activation of http://xxx/sites/xxxx/_vti_bin/ReportBuilder/ReportBuilder_3_0_0_0.application?SaveLocation=http%3a%2f%2xxx%2fsites%2fxxxx%2fDocuments has started.
* [8/25/2014 3:37:07 AM] : Processing of deployment manifest has successfully completed.
* [8/25/2014 3:37:07 AM] : Installation of the application has started.
ERROR DETAILS
Following errors were detected during this operation.
* [8/25/2014 3:37:10 AM] System.Deployment.Application.InvalidDeploymentException (HashValidation)
- Application manifest has either a different computed hash than the one specified or no hash specified at all.
- Source: System.Deployment
- Stack trace:
at System.Deployment.Application.DownloadManager.DownloadApplicationManifest(AssemblyManifest deploymentManifest, String targetDir, Uri deploymentUri, IDownloadNotification notification, DownloadOptions options, Uri&
appSourceUri, String& appManifestPath)
at System.Deployment.Application.DownloadManager.DownloadApplicationManifest(AssemblyManifest deploymentManifest, String targetDir, Uri deploymentUri, Uri& appSourceUri, String& appManifestPath)
at System.Deployment.Application.ApplicationActivator.DownloadApplication(SubscriptionState subState, ActivationDescription actDesc, Int64 transactionId, TempDirectory& downloadTemp)
at System.Deployment.Application.ApplicationActivator.InstallApplication(SubscriptionState& subState, ActivationDescription actDesc)
at System.Deployment.Application.ApplicationActivator.PerformDeploymentActivation(Uri activationUri, Boolean isShortcut, String textualSubId, String deploymentProviderUrlFromExtension, BrowserSettings browserSettings, String&
errorPageUrl)
at System.Deployment.Application.ApplicationActivator.ActivateDeploymentWorker(Object state)
--- Inner Exception ---
System.Deployment.Application.InvalidDeploymentException (HashValidation)
- File, MSReportBuilder.exe.manifest, has a different computed hash than specified in manifest.
- Source: System.Deployment
- Stack trace:
at System.Deployment.Application.ComponentVerifier.VerifyFileHash(String filePath, Hash hash)
at System.Deployment.Application.ComponentVerifier.VerifyFileHash(String filePath, HashCollection hashCollection)
at System.Deployment.Application.DownloadManager.DownloadApplicationManifest(AssemblyManifest deploymentManifest, String targetDir, Uri deploymentUri, IDownloadNotification notification, DownloadOptions options, Uri&
appSourceUri, String& appManifestPath)
COMPONENT STORE TRANSACTION DETAILS
No transaction information is available. -
Report 11g RUN_REPORT_OBJECT is not working FRM-41214
Dear all,
We are not able to run the reports using RUN_REPORT_OBJECT from forms 11g, we have tried our maximum to resolve this issue, unfortunately no proper documentation. Forms working without any issue are able to see the report out puts if I try running the report using internet explorer, but from the forms using RUN_REPORT_OBJECT It is getting failed. I could see two reports servers were running RptSvr_xxxxxx_FrmInst, rep_wls_reports_xxxxxx_frminst both servers queue status page also we can browse, but the reports running using RUN_REPORT_OBJECT is not working, the job queue is not showing these jobs.
When I use report diagnose it is showing "Exception when retrieving IOR"
Environment - Fusion Middleware 11.1.1.5.0, Windows 2008 server
Error : FRM 41214 Unable to run report
Can anyone through some lights on this issue.
We areTrying the below code :
DECLARE
v_report_id Report_Object;
vc_ReportServerJob VARCHAR2(100);
vc_rep_status VARCHAR2(100);
vjob_id VARCHAR2(100);
BEGIN
v_report_id:= FIND_REPORT_OBJECT('CFR007');
SET_REPORT_OBJECT_PROPERTY(v_report_id,REPORT_DESFORMAT,'PDF');
SET_REPORT_OBJECT_PROPERTY(v_report_id,REPORT_DESTYPE,CACHE);
SET_REPORT_OBJECT_PROPERTY(v_report_id,REPORT_COMM_MODE,SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(v_report_id,REPORT_SERVER,'RptSvr_xxxxxxx_FrmInst');
SET_REPORT_OBJECT_PROPERTY(v_report_id,REPORT_OTHER,'paramform=no');
vc_ReportServerJob:=RUN_REPORT_OBJECT(v_report_id);
vjob_id := substr(vc_ReportServerJob,instr(vc_ReportServerJob,'_',-1)+1);
vc_rep_status := REPORT_OBJECT_STATUS(vc_ReportServerJob);
IF vc_rep_status = 'FINISHED' THEN
WEB.SHOW_DOCUMENT ('/reports/rwservlet/getjobid'|| vjob_id ||'?server=rptsvr_XXXXXXXX_frminst','_blank');
ELSE
message ('Report failed with error message '||vc_rep_status);
END IF;
END;
Thanks & Regardsuser11319190 wrote:
I have posted it in the begning ,anway i am copying it for you again...
DECLARE
v_report_id Report_Object;
vc_ReportServerJob VARCHAR2(100);
vc_rep_status VARCHAR2(100);
vjob_id VARCHAR2(100);
BEGIN
v_report_id:= FIND_REPORT_OBJECT('CFR007');
SET_REPORT_OBJECT_PROPERTY(v_report_id,REPORT_DESFORMAT,'PDF');
SET_REPORT_OBJECT_PROPERTY(v_report_id,REPORT_DESTYPE,CACHE);
SET_REPORT_OBJECT_PROPERTY(v_report_id,REPORT_COMM_MODE,SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(v_report_id,REPORT_SERVER,'RptSvr_xxxxxxx_FrmInst');
SET_REPORT_OBJECT_PROPERTY(v_report_id,REPORT_OTHER,'paramform=no');
vc_ReportServerJob:=RUN_REPORT_OBJECT(v_report_id); ---- exception is here
vjob_id := substr(vc_ReportServerJob,instr(vc_ReportServerJob,'_',-1)+1);
vc_rep_status := REPORT_OBJECT_STATUS(vc_ReportServerJob);
-----Please not that it is not reaching here......
IF vc_rep_status = 'FINISHED' THEN
WEB.SHOW_DOCUMENT ('/reports/rwservlet/getjobid'|| vjob_id ||'?server=rptsvr_XXXXXXXX_frminst','_blank');
ELSE
message ('Report failed with error message '||vc_rep_status);
END IF;
END;
Edited by: user11319190 on 08-May-2013 00:12Hmm.. I don't see the report name whom is calling or run. I modified your code, give a try..
DECLARE
v_report_id Report_Object;
vc_ReportServerJob VARCHAR2(100);
vc_rep_status VARCHAR2(100);
vjob_id VARCHAR2(100);
BEGIN
v_report_id:= FIND_REPORT_OBJECT('CFR007');
SET_REPORT_OBJECT_PROPERTY(v_report_id,REPORT_DESFORMAT,'PDF');
SET_REPORT_OBJECT_PROPERTY(v_report_id,REPORT_DESTYPE,CACHE);
SET_REPORT_OBJECT_PROPERTY(v_report_id,REPORT_COMM_MODE,SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(V_REPORT_ID,REPORT_EXECUTION_MODE,BATCH);
/* edit the report name like D:\repname.rep */
SET_REPORT_OBJECT_PROPERTY(v_report_id,REPORT_FILENAME,<write the full path of reports>);
SET_REPORT_OBJECT_PROPERTY(v_report_id,REPORT_SERVER,'RptSvr_xxxxxxx_FrmInst');
SET_REPORT_OBJECT_PROPERTY(v_report_id,REPORT_OTHER,'paramform=no');
vc_ReportServerJob:=RUN_REPORT_OBJECT(v_report_id); ---- exception is here
VJOB_ID := SUBSTR(VC_REPORTSERVERJOB,INSTR(VC_REPORTSERVERJOB,'_',-1)+1);
/* i added loop */
WHILE VC_REP_STATUS in ('RUNNING','OPENING_REPORT','ENQUEUED') LOOP
vc_rep_status := REPORT_OBJECT_STATUS(vc_ReportServerJob);
END LOOP;
-----Please not that it is not reaching here......
IF VC_REP_STATUS = 'FINISHED' THEN
WEB.SHOW_DOCUMENT ('/reports/rwservlet/getjobid'|| vjob_id ||'?server=rptsvr_XXXXXXXX_frminst','_blank');
ELSE
message ('Report failed with error message '||vc_rep_status);
END IF;
END;Hope this works.. -
Unable to call report from forms-oracle9iDS.
hi..,
i created a report in reports 9i and calling the same
from a form created in 9i,i am calling from a push button having following code in it..,
Declare
report_id Report_Object;
ReportServerJob VARCHAR2(100);
BEGIN
report_id:= find_report_object('MyReport1');
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_COMM_MODE,SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_DESTYPE,CACHE);
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_SERVER,'repserver');
ReportServerJob:=run_report_object(report_id);
end;
while clicking this button i am getting the following messsage "frm-41214:unable to run report".
steps followed
1.Created a report by name myreport1.rdf
2.attached the myreport1.rdf in the reports node of the forms browser.
3.Created a reports server by name "repserver"using
rwserver repserver -install autostart=yes
4.report_path is checked for the path where my report is residing.
5.added a string value in regedit tns_admin='oracle_home\network\admin'
(**)6.in TNSNAMES.ORA I expect the error is here..,
how do i refer this repserver in TNSNAMES.ORA..,????
database server is in another node..,and report server is in my machine itself..,
please help me urgent..,i am trying hard for this for a long time...??
Regards,
Akula.
protechsoft systems Pvt.Ltd.
Chennai,India.Akula,
the Reports Server name doesn't need to be mentioned in teh TNSNAMES file anymore. This was required in Reports6i and before. Since Reports9i the architecture has changed and a Report Server can be accessed by its name in teh network. The problem that is reported can be due to uncompiled PLSQL in teh Reports rdf file. If you check the Reports queuemanager (on Windows) or using the Servlet command then you see the detailed error message. If you don't see any error message in teh queuemanager then the Reports module file wasn't found. Make sure that the Reports9i Server has access to this. The Reports9i Server Reports_Path is not set in the registry (as far as I know) but in one of its configuration files.
As a quick test - look for the Reports sample files and add your file to the same directory.
Frank -
FRM-41214: Unable ro run report while calling a report from a form in 9iDS
Am in the process of migrating from Developer 6i client/server to Developer 9iDS on Windows 2000.
I have read through the various postings on this issue & have made changes accordingly. I also referred to the white paper on the Forms/Reports integration.
As I am trying to do a prototype, am compiling my forms/reports on my local machine & not on the apps. server.
I installed a report server on my local machine as,
rwserver -install 9irep
I have defined this as a NT service and it is up & running & so is my OC4J instance.
I have defined a reports object in my Form Builder & set Report Server=9irep,
Destype=Cache,
Execution mode=runtime
Communication_mode=synchronous.
I also removed the /security tag from the <report server>.conf file as suggested in the white paper. Also set the single sign-on to NO for the reports service.
I have replaced my run_product with the run_report_object built-in as follows.
Declare
report_id REPORT_OBJECT;
report_status VARCHAR2(255);
rep_job_id VARCHAR2(255);
Begin
report_id := FIND_REPORT_OBJECT('KS'); --Created in form under node "Reports"
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_FILENAME,'C:\Kalpana\9i_Prototype\ISSMDLCUST.rdf');
rep_job_id := RUN_REPORT_OBJECT(report_id);
report_status := REPORT_OBJECT_STATUS(rep_job_id);
WHILE report_status in ('RUNNING','OPENING_REPORT','ENQUEUED')
LOOP
report_status := REPORT_OBJECT_STATUS(rep_job_id);
END LOOP;
message(report_status); pause;
IF report_status='FINISHED' THEN
Web.Show_Document('http://houwdisndgd01:8888/reports/server/getjobid='
||rep_job_id||'?server=ks');
END IF;
End;
I get an error message "FRM 41214: Unable to run report" right after the call to run_report_object.
Can someone please tell me where am going wrong with my run_report_object built-in? (I also need help writing my web.show document to point it to my local machine/folders).
Thanks
KalpanaHow I have implemented the same and works
Local OC4J is running.
I established a reports server "repserver90" as a service.
I created a report named "C:\TMP\TMP\test_report.rdf"
I created a form with a Reports object with properties:
Name: "EMP"
Filename: "C:\TMP\TMP\test_report.rdf"
Execution mode "Batch"
Communication mode "Sychronous"
Report Destination Type "Cache"
Report Destination Format "HTML"
Report Server "repserver90"
I call the report with the procedure:
PROCEDURE TEST_REPORT IS
repid REPORT_OBJECT;
v_rep VARCHAR2(100);
rep_status VARCHAR2(20);
BEGIN
repid := find_report_object('EMP');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_EXECUTION_MODE,BATCH);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_COMM_MODE,SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESTYPE,CACHE);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESFORMAT,'html');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_SERVER,'repserver90');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_OTHER,'paramform=no pdeptno='||:dept.deptno);
v_rep := RUN_REPORT_OBJECT(repid);
rep_status := REPORT_OBJECT_STATUS(v_rep);
WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED')
LOOP
rep_status := report_object_status(v_rep);
END LOOP;
IF rep_status = 'FINISHED' THEN
/*Display report in the browser*/
WEB.SHOW_DOCUMENT('http://localhost:8888/reports/rwservlet/getjobid'||substr(v_rep,instr(v_rep,'_',-1)+1)||'?'||'server=repserver90','_blank');
ELSE
message('Error when running report');
END IF;
END;
Minas -
SOS Unable to Connect Report Server
hi alll
i have to present my project 9/1/2008 i have two days
and i have three report
i set all the details
i set the name of the server RepSrv
but at the run time
this message apear
Unable to connect Report Server
should i write something in .DEV
what should i do
i work on 9i version
i wrote this Simple Code
report := RUN_REPORT_OBJECT('REPORT46');
i set the property in the Property paletty
NOT: when i try to run the Report in Report Developer
the browser apear and send me the message
"Cannot make crusor from "The name of the table""
i think it is another problem
please help
this is my mail if you want to send me solution
[email protected]
please help
thanks to alli write this Code
and then the browser run and still run until now
but it didn't apear any thing
so .... any help in that
Declare
repid Report_Object;
v_rep VARCHAR2(100);
rep_status VARCHAR2(20);
vjob_id varchar(100);
BEGIN
repid := find_report_object('REPORT51');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_EXECUTION_MODE,BATCH);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_COMM_MODE,SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESTYPE,CACHE);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESFORMAT,'html');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_SERVER,'repserver90');
v_rep := RUN_REPORT_OBJECT(repid);
rep_status := REPORT_OBJECT_STATUS(v_rep);
vjob_id := substr(v_rep,length('repserver90')+2);
WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED')
Loop
rep_status := report_object_status(v_rep);
END LOOP;
IF rep_status = 'FINISHED' THEN /*Display report in the browser*/
WEB.SHOW_DOCUMENT('http://hiast-3ec7eef07:8888/reports/rwservlet/getjobid'||substr(v_rep,instr(v_rep,'_',-1)+1)||'?'||'server=repserver90','_blank');
ELSE
message('Error when running report');
END IF;
END; -
Unable to open report from forms 9i
Hi,
Unable to open report from forms 9i and got the following error.
Error : REP-0503, You did not specify the name of a report
Steps followed
1.Created report object in forms using existing report
2.changed the following properties
Exec. mode : runtime
comm mode : synchronous
3. When -button -Pressed Trigger;
Declare
Repid report_object;
Begin
repid:=find_report_object('report4');
v_rep:=run_report_object(repid);
End;Hi,
did you specify a Reports rdf or rep file that should be run. You can do this either in a trigger or as a property of the Reports object node in Forms.
Frank -
FRM-41214- unable to run reports
Env:
Solaris running 6i forms and reports server patched to patch 9.
when calling report from form using run_report_object, I get
FRM-41214- unable to run report
FRM-41217- Unable to get report job status
FRM-41213- Unable to connect to report server RepsrvSMARTS
This only occurs for one of the reports. I am able to run a different report
with no problem.
TIA!Jim,
My guess is that the problem identified in bug 1731733 is the root cause. It manifests itself in various ways (see related bugs). The base bug is 1953704 and is fixed in Net80, and is available in one-off patches for various platforms, including Solaris.
regards,
Stewart -
Unable to create report. Query produced too many results
Hi All,
Does someone knows how to avoid the message "Unable to create report. Query produced too many results" in Grid Report Type in PerformancePoint 2010. When the mdx query returns large amount of data, this message appears. Is there a way to get all
the large amount in the grid anyway?
I have set the data Source query time-out under Central Administration - Manager Service applications - PerformancePoint Service Application - PerformancePoint Service Application Settings at 3600 seconds.
Here Event Viewer log error at the server:
1. An exception occurred while running a report. The following details may help you to diagnose the problem:
Error Message: Unable to create report. Query produced too many results.
<br>
<br>
Contact the administrator for more details.
Dashboard Name:
Dashboard Item name:
Report Location: {3592a959-7c50-0d1d-9185-361d2bd5428b}
Request Duration: 6,220.93 ms
User: INTRANET\spsdshadmin
Parameters:
Exception Message: Unable to create report. Query produced too many results.
Inner Exception Message:
Stack Trace: at Microsoft.PerformancePoint.Scorecards.Server.PmServer.ExecuteAnalyticReportWithParameters(RepositoryLocation analyticReportViewLocation, BIDataContainer biDataContainer)
at Microsoft.PerformancePoint.Analytics.ServerRendering.OLAPBase.OlapViewBaseControl.ExtractReportViewData()
at Microsoft.PerformancePoint.Analytics.ServerRendering.OLAPBase.OlapViewBaseControl.CreateRenderedView(StringBuilder sd)
at Microsoft.PerformancePoint.Scorecards.ServerRendering.NavigableControl.RenderControl(HtmlTextWriter writer)
PerformancePoint Services error code 20604.
2. Unable to create report. Query produced too many results.
Microsoft.PerformancePoint.Scorecards.BpmException: Unable to create report. Query produced too many results.
at Microsoft.PerformancePoint.Scorecards.Server.Analytics.AnalyticQueryManager.ExecuteReport(AnalyticReportState reportState, DataSource dataSource)
at Microsoft.PerformancePoint.Scorecards.Server.PmServer.ExecuteAnalyticReportBase(RepositoryLocation analyticReportViewLocation, BIDataContainer biDataContainer, String formattingDimensionName)
at Microsoft.PerformancePoint.Scorecards.Server.PmServer.ExecuteAnalyticReportWithParameters(RepositoryLocation analyticReportViewLocation, BIDataContainer biDataContainer)
PerformancePoint Services error code 20605.
Thanks in advance for your help.Hello,
I would like you to try the following to adjust your readerquotas.
Change the values of the parameters listed below to a larger value. We recommend that you double the value and then run the query to check whether the issue is resolved. To do this, follow these steps:
On the SharePoint 2010 server, open the Web.config file. The file is located in the following folder:
\Program Files\Microsoft Office Servers\14.0\Web Services\PpsMonitoringServer\
Locate and change the the below values from 8192 to 16384.
Open the Client.config file. The file is located in the following folder:
\Program Files\Microsoft Office Servers\14.0\WebClients\PpsMonitoringServer\
Locate and change the below values from 8192 to 16384.
After you have made the changes, restart Internet Information Services (IIS) on the SharePoint 2010 server.
<readerQuotas
maxStringContentLength="2147483647"
maxNameTableCharCount="2147483647"
maxBytesPerRead="2147483647"
maxArrayLength="2147483647"
maxDepth="2147483647"
/>
Thanks
Heidi Tr - MSFT
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. -
We are working with Developer6.0,OAS 4.0.7,
Oracle 8.0.
We have a static implementation. Initially,
we had Jinitiator 1.1.7.11. Reports were working fine. Later, We upgraded Jinitiator to 1.1.7.18. From then on I am unable to load reports on the web.
This is the URL that I am using to connect to my report http://paygoweb.telemedia.co.nz/webreports?server=rep60server.world&report=status.rdf&userid=paygoapp/pg13@paygo1&destype=cache&destype=html
When I try to connect. IT says web site found,awaiting reply and after 1 minute or so a page is displayed saying unable to service this request please try later.
nullDear Arun ,
When I execute my query, am getting the below URL....
http://<Company>/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?QUERY=0TCT_MC11_Q0131&VARIABLE_SCREEN=X&DUMMY=1
When i tried executing for Web templates we are getting the error " error in Java" .Anyways we have assigned this issue to Basis guys as we don't know much whether Java Stack,FQDN are instaled or not....
Portal connection is there but we are unable to go to the portal page....
Thanks for the inputs....will get back to you after the response from Basis.
Regards,
Ugendhar
Edited by: Arun Varadarajan on Mar 3, 2009 3:31 PM -
Hi
This started with an asp.net application which I have been maintaining for several years, on an XP 32-bits box. Alas, the box died, and I have acquired a new Development machine, now with Windows 7/64-bits. I have installed Visual Studio 2010 and Crystal reports (13.0.,9), including runtime for 32 and 64 bits.
I got the "unable to load report" error, and I think I have tried everything I could find on the web related to solving this issue.
Finally I got Down to creating a new dummy asp.net application with a dummy report just displying the text TEST. This report Works fine when run from within VS, but if I deploy it to the web server on the Development machine I also get the unable to load report failure.
I believe this is a configuration issue. The application has run fine for years, I just can't get it to Work on the new development machine.
Please help
PeterMake sure that process has read / write rights to the %TEMP% folder. Process Monitor may help.
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter -
FRM-41214 unable to run report
Hi,
i'm trying in this days to migrate my software from 6i to 9i....
Particularly i had some problems when i try to launch a report from my form...
The form had migrated from Oracle 6i and it seems that it hasn't any type of problem but when i try to call a report from the web i obtain the error FRM-41214 (unable to run report)
but this report is correctly positioned in the right path and when i use a different report of a different project (compiled for the 9i) i note that the error occurs when i use one of my group obtained from my queries like source for a new repeating frame.....
Exactly until when i use one of the old groups of the old report it's all right but when i try to use a new group referred to a my new query i obtain the precedent error
(FRM-41214, unable to run report)
But i don't have any type of error when i compile...
Can anyone help me? Some one can tell me what can i do or some one can indicate me same document where i can read all the step to migrate a report??
Thanks a lot in advanceProblem resolved. Copy of document can be found
in METALINK, NOTE: 1069651.6. This will resolved the problem.
Thanks. -
Unable to open reports with Web intelligence
Hi there,
We are unable to open reports using Webi Intelligence. Error of "Session is closed(Error: INF)" apears.
I have restarted the SIA and Apache services with no luck.
Version : Business Objects XI3, Edge Series professional
Kind regards,Try changing the idle connection timeout on your Web Intelligence Processing Server to 60 minutes (from the CMC).
If this doesn't work, please add a trace to the Web Intelligence Processing Server (add a -trace to the command line parameters of the server). and post the log for the relevant time period. -
Hi Team,
We have reporting services and sharepoint 2010 installed on one server and DB(Sql server2008 R2 )server installed on another machine. But we are unable to configure reporting(SSRS) on the web(sharepoint)server. Is there any similar configuration
done on any of your environments and can you please suggest us the workround/resolution.
Regards,
Sobha MuyidaHi ,
Iam unable to insert the image/error screenshot here as I have created the account yesterday which throws me email verification error. Though , I have given the error details above. Please suggest accordingly. PFB the details again :
while building OLAP cube, we are facing below errors with build failure. And DB server is running fine.
===== Initiating OLAP database build process =====
[6/10/2014 12:03 PM] Cube build request message has been added to the Project Server queue
===== Verifying and running pre-build server event handler =====
[6/10/2014 12:04 PM] Verifying and running pre-build server event handler
===== Determining database and OLAP database structure =====
[6/10/2014 12:04 PM] Cube build initialization started
[6/10/2014 12:04 PM] OLAP database and cube structure was determined successfully
===== Building database and cubes =====
[6/10/2014 12:04 PM] Cube build session started
===== Process Completed =====
[6/10/2014 12:04 PM] Failed to build the OLAP cubes. Error: Failed to connect to the Analysis Services server ServerName. Error: A connection cannot be made. Ensure that the server is running.
Regards,
Sobha -
Unable to invoke webservice from plsql.
Hi i am unable to invoke the web service i am getting the following error when i run the following coe can any one help out its great help thanks you
error->
Invoke_Ws : When Others -- ORA-29532: Java call terminated by uncaught Java exception: javax.xml.rpc.soap.SOAPFaultException:
Caught exception while handling request: trailing block elements must have an id attribute
set serveroutput on
declare
service_ sys.utl_dbws.SERVICE;
call_ sys.utl_dbws.CALL;
service_qname sys.utl_dbws.QNAME;
port_qname sys.utl_dbws.QNAME;
operation_qname sys.utl_dbws.QNAME;
string_type_qname sys.utl_dbws.QNAME;
retx ANYDATA;
retx_string VARCHAR2(100);
retx_len number;
params sys.utl_dbws.ANYDATA_LIST;
v_Group_Id VARCHAR2(4);
v_Fund_Id VARCHAR2(6);
v_Query_Date DATE;
v_Query_Object VARCHAR2(2);
v_Error_Code VARCHAR2(30);
v_Error_Message VARCHAR2(2000);
begin
service_qname := sys.utl_dbws.to_qname(null, 'RealTime_Valu_WS');
service_ := sys.utl_dbws.create_service(service_qname);
port_qname := sys.utl_dbws.to_qname(null, 'RealTime_Valu_WSSoapHttpPort');
operation_qname := sys.utl_dbws.to_qname('http://RealTime_Valu_WS_Java/RealTime_Valu_WS.wsdl/types/', 'realtimeValWsElement');
call_ := sys.utl_dbws.create_call(service_, port_qname, operation_qname);
sys.utl_dbws.set_target_endpoint_address(call_, 'http://in-blr-tbpel1.igefi.tld/pa360/RealTime_Valu_WS_360/RealTime_Valu_WSSoapHttpPort');
string_type_qname := sys.utl_dbws.to_qname('http://www.w3.org/2001/XMLSchema', 'string');
sys.utl_dbws.add_parameter(call_, 'groupId', string_type_qname, 'ParameterMode.IN');
sys.utl_dbws.add_parameter(call_, 'flglnclsoft', string_type_qname, 'ParameterMode.IN');
sys.utl_dbws.add_parameter(call_, 'queryDate', string_type_qname, 'ParameterMode.IN');
sys.utl_dbws.add_parameter(call_, 'queryObject', string_type_qname, 'ParameterMode.IN');
sys.utl_dbws.add_parameter(call_, 'execTimestamp', string_type_qname, 'ParameterMode.IN');
sys.utl_dbws.add_parameter(call_, 'fundId', string_type_qname, 'ParameterMode.IN');
Sys.Utl_dbws.add_parameter(Call_,'Fund_Id' ,String_type_qname,'parameterMode.OUT');
Sys.Utl_dbws.add_parameter(Call_,'Query_Date' ,String_type_qname,'parameterMode.OUT');
Sys.Utl_dbws.add_parameter(Call_,'Query_Object' ,String_type_qname,'parameterMode.OUT');
Sys.Utl_dbws.add_parameter(Call_,'Error_Code' ,String_type_qname,'parameterMode.OUT');
Sys.Utl_dbws.add_parameter(Call_,'Error_Message',String_type_qname,'parameterMode.OUT');
sys.utl_dbws.set_return_type(call_, string_type_qname);
params(1) := ANYDATA.convertvarchar('MP1');
params(2) := ANYDATA.convertvarchar('Y');
params(3) := ANYDATA.convertvarchar('2009-01-30');
params(4) := ANYDATA.convertvarchar('C');
params(5) := ANYDATA.convertvarchar('00:00');
params(6) := ANYDATA.convertvarchar('MPNWS');
dbms_output.put_line('BEFORE INVOKING');
retx := sys.utl_dbws.invoke(call_, params); dbms_output.put_line('BEFORE PL/SQL DII client return ' || retx_string);
retx_string := retx.accessvarchar2;
dbms_output.put_line('AFTER PL/SQL DII client return ' || retx_string);
v_Group_Id := PARAMS(7).ACCESSVARCHAR2;
dbms_output.put_line('PL/SQL DII client return v_Group_Id ' || v_Group_Id);
v_Fund_Id := PARAMS(8).ACCESSVARCHAR2;
dbms_output.put_line('PL/SQL DII client return v_Group_Id ' || v_Group_Id);
v_Query_Date := PARAMS(9).ACCESSVARCHAR2;
dbms_output.put_line('PL/SQL DII client return v_Group_Id ' || v_Group_Id);
v_Query_Object := PARAMS(10).ACCESSVARCHAR2;
dbms_output.put_line('PL/SQL DII client return v_Group_Id ' || v_Group_Id);
v_Error_Code := PARAMS(11).ACCESSVARCHAR2;
dbms_output.put_line('PL/SQL DII client return v_Group_Id ' || v_Group_Id);
v_Error_Message := PARAMS(12).ACCESSVARCHAR2;
dbms_output.put_line('PL/SQL DII client return ' || retx_string);
EXCEPTION
WHEN OTHERS THEN
dbms_output.put_line('Invoke_Ws : When Others -- '||SQLERRM(SQLCODE));
end;
my code is working only before the line of invoke statement..when invoke line is executed i am getting the error above mentioned
so any help!
thanks
VijayJinkala wrote:
any helpDon't use Java when PL/SQL is perfectly capable of doing the task at hand?
I have an inherent dislike of systems and application that have too many moving parts. Keep the moving parts to a minimum.. and the code is faster, more robust, and a lot easier to read, understand and maintain.
So in that regard, I do not understand what the deal is with utl_dbws and why it could not just use plain vanilla PL/SQL..? But then there are likely Java faithful that proclaims The Religion too when designing PL/SQL interface packages in Oracle... :-(
I've posted an example of how to call a web service using PL/SQL code only, no Java, in {message:id=4205205}.
Maybe you are looking for
-
Hello, I've been going through my software and downloading all the updates I can find. I was wondering if any of you might have this in your archives, Apple seems to have "lost" it and my usual haunts have come up empty. I've recently bought Mac OS X
-
ORA-22288: file or LOB operation FILEOPEN failed Permission denied
I have installed Oracle XE (Universal) on Fedora Core 8 I am trying to update Apex to 3.1.1. I have downloaded and extracted the zip file using unizp apex_3.1.1.zip I ran @apexins SYSAUX SYSAUX TEMP /i/ and @apxchpwd Both were successful Now when I a
-
BAPI needed for change material(Transaction : MM02)
Hi all, We have a requirement where in we need to post the documents throuh BAPI for change material (Transaction: MM02). Any inputs on this..is highly appreciable... thanks in advance... regards.. prathima.
-
Naming convention document for SAP BI 7.0
Hi, Am looking for Naming convention document for SAP BI 7.0 . I need for all the objects in BI 7.0. Thanks in advance, Satya
-
XML Source Error - cache property
Hello, I am using Livecycle Designer and am trying to edit an existing form. I have no problem editing in the design view and master pages, however there are certain texts on the preview and printed form that are only viewable in the xml source (that