Unable to process RAW .PEF .DNG from Pentax K-7

I have the latest updates. Camera Raw 3.1, Aperture 3.0.2, OS 10.6.3... when i first import the images I can process them as normal. My RAW adjustments are available. But then after a few minutes aperture will update them and it will say the file has been processed by an earlier version (which is a lie because I have never processed them before) and there's a button to "reprocess". The images will lose all adjustments and have a green hue... no boost or anything. This is happening with both .PEF and .DNG from my Pentax K-7... which is running firmware 1.3
I've tried reinstalling aperture 3.0 but it's the same. I've also deleted raw camera 3.1 by:
sudo rm -rf /System/Library/CoreServices/RawCamera.bundle
and reinstalled... it's still the same.
what gives?

Hi, i have exactly the same issue on my computer, but with a Nikon D90. I just completely reinstalled system (OS, Aperture, Camera Raw) from scratch on new harddisk, no avail. Really mysterious, get indeed a weird green hue, and once image goes like this, there is no turning back. Still looking for solution as well - sorry!

Similar Messages

  • Unable to process inbound EDI docs from TP-multiple Host ID's,1 transaction

    Issue:
    Unable to process inbound EDI documents from trading partners
    (Same doctype and revision, but diff receiver ID’s for host)
    Host: ISA ID’s are HOSTA, HOSTB
    Transaction: X12, 210, 5010
    Trading Partner A: sends EDI document with these values
    Interchange Sender ID: TPA
    Application Sender's Code: TPA
    Interchange Receiver ID: HOSTA
    Application Receiver's Code: HOSTA
    B2B setups are as below
    Business action: Process_210
    Operational Capability for Trading Partner A : Process_210_Initiator It has
    Interchange Sender ID as TPA
    Interchange Receiver ID as TPA
    Application Sender's Code: TPA
    Application Receiver's Code: TPA
    This creates a Process_210_Responder for HOST
    It has
    Interchange Sender ID as HOSTA
    Interchange Receiver ID as HOSTA
    Application Sender's Code: HOSTA
    Application Receiver's Code: HOSTA
    Validated Agreement and deployed, Result is success and everything works fine until here
    Note: B2B validates taking everything from Process_210_Initiator except the Interchange Receiver ID that it gets from the Process_210_Responder
    New Trading Partner B also sends us an X12, 210, 5010 but he uses Receiver ID as HOSTB
    Trading Partner B: sends EDI document with these values
    Interchange Sender ID: TPB
    Application Sender's Code: TPB
    Interchange Receiver ID : HOSTB
    Application Receiver's Code: HOSTB
    B2B setups are as below
    Business action: Process_210
    Operational Capability for Trading Partner B : Process_210_Initiator It has
    Interchange Sender ID as TPB
    Interchange Receiver ID as TPB
    Application Sender's Code: TPB
    Application Receiver's Code: TPB
    This doesn’t create a new Process_210_Responder for HOST It has
    Interchange Sender ID as HOSTA
    Interchange Receiver ID as HOSTA
    Application Sender's Code : HOSTA
    Application Receiver's Code : HOSTA
    Validated Agreement and deployed, Result the document fails with error
    Validation of Interchange parameters failed. Please verify all the Interchange parameters in the B2B configuration match the Group parameters in the message. Make sure that the ecs file for this Interchange is valid
    Upon looking at the log file it fails, as the Interchange Receiver ID in data is HOSTB where as in Process_210_Responder it is setup as HOSTA
    Work Around that we tried, but could not succeed
    Create a new business action called Process_210_HOSTB, created a new Document Protocol Revision X12_5010_HOSTB,Created a doc type 210 version 5010 under that
    Used this new Business action for Trading Partner B so the new setups look like this
    Business action : Process_210_HOSTB
    Operational Capability for Trading Partner B : Process_210_HOSTB_Initiator It has
    Interchange Sender ID as TPB
    Interchange Receiver ID as TPB
    Application Sender's Code : TPB
    Application Receiver's Code : TPB
    This creates a new Process_210_HOSTB_Responder for HOST It has
    Interchange Sender ID as HOSTB
    Interchange Receiver ID as HOSTB
    Application Sender's Code : HOSTB
    Application Receiver's Code : HOSTB
    Validated Agreement, but could not deploy as I was getting AIP-11016 SQL error , may be integrity constraint issue
    Note: I was able to deploy this agreement if I change the Document Type from 210 to something else like 210_new, but since the document is EDI I can’t have the Document Type as anything except 210

    Ramesh,
    Sorry for the delay , but this was the first thing I tried and it didn't work, I tried again just to be sure, it didn't work I am getting this error
    When group Receiver ID didn't match
    "Validation of Group parameters failed. Please verify all the Group parameters in the B2B configuration match the Group parameters in the message. The following parameters do not match the configured parameters in B2B"
    In addition, when Interchange Receiver ID did not match
    "Validation of Interchange parameters failed. Please verify all the Interchange parameters in the B2B configuration match the Group parameters in the message. Make sure that the ecs file for this Interchange is valid"
    Here is the log file extract
    2008.07.28 at 14:31:24:917: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:ISelectorImpl Enter
    2008.07.28 at 14:31:24:917: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:ISelectorImpl validateEnvelope = true
    2008.07.28 at 14:31:24:917: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:ISelectorImpl Leave
    2008.07.28 at 14:31:24:917: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:cloneSelector Enter
    2008.07.28 at 14:31:24:917: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:cloneSelector Return = oracle.tip.adapter.b2b.document.edi.ISelectorImpl@12d8ecd
    2008.07.28 at 14:31:24:917: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:getValue Param Name = SeverityConfig
    2008.07.28 at 14:31:24:917: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:getValue Value = null
    2008.07.28 at 14:31:24:917: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:cloneSelector Enter
    2008.07.28 at 14:31:24:917: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:cloneSelector Return = oracle.tip.adapter.b2b.document.edi.ISelectorImpl@1fa5e5e
    2008.07.28 at 14:31:24:917: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:reset Enter
    2008.07.28 at 14:31:24:917: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:reset Leave
    2008.07.28 at 14:31:24:917: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:cloneSelector Enter
    2008.07.28 at 14:31:24:917: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:cloneSelector Return = oracle.tip.adapter.b2b.document.edi.ISelectorImpl@497062
    2008.07.28 at 14:31:24:917: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup Enter
    2008.07.28 at 14:31:24:917: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup key = InterchangeReceiverQual, val = [02]
    2008.07.28 at 14:31:24:917: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup param = [02]
    2008.07.28 at 14:31:24:917: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup key = InterchangeSenderID, val = [REMOTETP]
    2008.07.28 at 14:31:24:917: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup param = [REMOTETP]
    2008.07.28 at 14:31:24:917: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup key = InterchangeReceiverID, val = [SLCY]
    2008.07.28 at 14:31:24:917: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup param = [SLCY]
    2008.07.28 at 14:31:24:917: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup key = Standard, val = [X12]
    2008.07.28 at 14:31:24:917: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup param = [X12]
    2008.07.28 at 14:31:24:917: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup key = InterchangeControlVersion, val = [00200]
    2008.07.28 at 14:31:24:917: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup param = [00200]
    2008.07.28 at 14:31:24:917: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup key = ec_DataNodeName, val = [Interchange]
    2008.07.28 at 14:31:24:917: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup key = InterchangeSenderQual, val = [02]
    2008.07.28 at 14:31:24:917: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup param = [02]
    2008.07.28 at 14:31:24:917: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup return = true
    2008.07.28 at 14:31:24:917: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup return = true
    2008.07.28 at 14:31:24:917: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:getValue Param Name = ecsFileKey
    2008.07.28 at 14:31:24:917: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:getValue Value = 60DD87849FFE4147BFCEB66842A33298-26-1-4
    2008.07.28 at 14:31:24:917: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:getValueBlob Param Name = ecsOptFileBlob
    2008.07.28 at 14:31:24:917: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:getValueBlob Param Name = ecsFileBlob
    2008.07.28 at 14:31:25:011: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:getStream Enter
    2008.07.28 at 14:31:25:011: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:getStream Leave
    2008.07.28 at 14:31:25:011: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:getValue Param Name = SeverityConfig
    2008.07.28 at 14:31:25:011: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:getValue Value = null
    2008.07.28 at 14:31:25:011: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:setControlNumber sName = Interchange, controlNumber = 210011217
    2008.07.28 at 14:31:25:011: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:setControlNumber return = true
    2008.07.28 at 14:31:25:011: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:getValue Param Name = TPName
    2008.07.28 at 14:31:25:011: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:getValue Value = RemoteTP
    2008.07.28 at 14:31:25:011: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doCommit Enter
    2008.07.28 at 14:31:25:011: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doCommit NodeGUID = {156BEDFC-931E-4923-840D-3AC0BAB670F2} position = 0
    2008.07.28 at 14:31:25:011: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doCommit Leave
    2008.07.28 at 14:31:25:011: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:cloneSelector Enter
    2008.07.28 at 14:31:25:011: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:cloneSelector Return = oracle.tip.adapter.b2b.document.edi.ISelectorImpl@1b5c22f
    2008.07.28 at 14:31:25:011: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup Enter
    2008.07.28 at 14:31:25:011: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup key = GroupReceiverID, val = [STMSLCY]
    2008.07.28 at 14:31:25:011: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup param = [SLCY]
    2008.07.28 at 14:31:25:011: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup Value and doc parameter don't match2008.07.28 at 14:31:25:011: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup key = GroupVersionNumber, val = [005010]
    2008.07.28 at 14:31:25:011: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup param = [005010]
    2008.07.28 at 14:31:25:011: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup key = ec_DataNodeName, val = [Group]
    2008.07.28 at 14:31:25:011: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup key = GroupSenderID, val = [REMOTETP]
    2008.07.28 at 14:31:25:011: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup param = [REMOTETP]
    2008.07.28 at 14:31:25:011: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup return = false
    2008.07.28 at 14:31:25:011: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup return = false
    2008.07.28 at 14:31:25:011: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:getValue Param Name = TPName
    2008.07.28 at 14:31:25:011: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:getValue Value = RemoteTP
    2008.07.28 at 14:31:25:011: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doCommit Enter
    2008.07.28 at 14:31:25:011: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doCommit getLookUpError Key = key = [GroupReceiverID] value = [STMSLCY] param = [SLCY] Value = null
    2008.07.28 at 14:31:25:011: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doCommit NodeGUID = {6EE88EFC-B084-4FA8-8EE8-8C7BD397E9F1} position = 0
    2008.07.28 at 14:31:25:011: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doCommit Leave
    2008.07.28 at 14:31:25:073: Thread-10: B2B - (DEBUG) iAudit report :
    Error Brief :
    5082: XEngine error - Guideline look-up failed.

  • RICS0001:Internal Error,unable to process the collected data from the device.

    Hi all,
    I've got the following error in Inventory Collection: 'RICS0001:Internal Error,unable to process the collected data from the device.'
    System is CW LMS 2.6
    If I search the web I get the following Cisco document:
    http://www.cisco.com/en/US/products/sw/cscowork/ps2073/prod_troubleshooting_guide09186a008036dff2.html
    '...in the log directory look for IC_Server.log.'
    IC_Server.log:
    [ Di Nov 16  15:54:27 CET 2010 ],INFO ,[Thread-25],com.cisco.nm.rmeng.inventory.ics.core.ICSCore,173,Got Async Request, User Name :admin
    [ Di Nov 16  15:54:27 CET 2010 ],INFO ,[Thread-25],com.cisco.nm.rmeng.inventory.ics.core.ICSCore,179,Request ID is : 1289919235488
    [ Di Nov 16  15:54:27 CET 2010 ],INFO ,[Thread-14],com.cisco.nm.rmeng.inventory.ics.core.CollectionController,309,Started processing device ID: 3341
    [ Di Nov 16  15:54:27 CET 2010 ],INFO ,[Thread-14],com.cisco.nm.rmeng.util.logger.RMELogger,724,com.cisco.nm.rmeng.util.db.DatabaseConnectionPool,getConnection,59,Inside ICSDatabaseConnection, MAX_COUNT =20
    [ Di Nov 16  15:54:28 CET 2010 ],INFO ,[Thread-14],com.cisco.nm.rmeng.inventory.ics.core.CollectionController,387,Started processing device Name: 9.152.255.101
    [ Di Nov 16  15:54:28 CET 2010 ],INFO ,[Thread-14],com.cisco.nm.rmeng.util.logger.XDILogger,77,com.cisco.nm.xms.xdi.pkgs.SharedInventoryCatIOS.ContainmentAGI_ENTITY_Mib_Non_Modular,g$eval,103,com.cisco.nm.xms.xdi.pkgs.SharedInventoryRouter:ContainmentAGI_ENTITY_Mib_Non_Modular:g$eval:populating ContainmentAG attributes, begins...
    [ Di Nov 16  15:54:28 CET 2010 ],INFO ,[Thread-14],com.cisco.nm.rmeng.util.logger.XDILogger,77,com.cisco.nm.xms.xdi.pkgs.SharedInventoryCatIOS.ContainmentAGI_ENTITY_Mib_Non_Modular,populatingTheChassis,110,com.cisco.nm.xms.xdi.pkgs.SharedInventoryRouter:ContainmentAGI_ENTITY_Mib_Non_Modular:populatingTheChassis:ContainmentAG attributes,collection from the device begins...
    [ Di Nov 16  15:54:29 CET 2010 ],INFO ,[Thread-14],com.cisco.nm.rmeng.util.logger.XDILogger,77,com.cisco.nm.xms.xdi.pkgs.SharedInventoryCatIOS.ContainmentAGI_ENTITY_Mib_Non_Modular,populatingTheChassis,147,com.cisco.nm.xms.xdi.pkgs.SharedInventoryRouter:ContainmentAGI_ENTITY_Mib_Non_Modular:populatingTheChassis:ContainmentAG attributes,collection from the device successful...
    [ Di Nov 16  15:54:29 CET 2010 ],INFO ,[Thread-14],com.cisco.nm.rmeng.util.logger.XDILogger,77,com.cisco.nm.xms.xdi.pkgs.SharedInventoryCatIOS.ContainmentAGI_ENTITY_Mib_Non_Modular,populatingTheChassis,149,com.cisco.nm.xms.xdi.pkgs.SharedInventoryRouter:ContainmentAGI_ENTITY_Mib_Non_Modular:populatingTheChassis:ContainmentAG attributes,population begins...
    [ Di Nov 16  15:54:29 CET 2010 ],INFO ,[Thread-14],com.cisco.nm.rmeng.util.logger.XDILogger,77,com.cisco.nm.xms.xdi.pkgs.SharedInventoryCatIOS.ContainmentAGI_ENTITY_Mib_Non_Modular,populatingTheChassis,216,com.cisco.nm.xms.xdi.pkgs.SharedInventoryRouter:ContainmentAGI_ENTITY_Mib_Non_Modular:populatingTheChassis:Before method getSlotsConfiguredStatistics
    [ Di Nov 16  15:54:29 CET 2010 ],INFO ,[Thread-14],com.cisco.nm.rmeng.util.logger.XDILogger,77,com.cisco.nm.xms.xdi.pkgs.SharedInventoryCatIOS.ContainmentAGI_ENTITY_Mib_Non_Modular,populatingTheChassis,225,com.cisco.nm.xms.xdi.pkgs.SharedInventoryRouter:ContainmentAGI_ENTITY_Mib_Non_Modular:populatingTheChassis:After method getSlotsConfiguredStatistics
    [ Di Nov 16  15:54:29 CET 2010 ],INFO ,[Thread-14],com.cisco.nm.rmeng.util.logger.XDILogger,77,com.cisco.nm.xms.xdi.pkgs.SharedInventoryCatIOS.ContainmentAGI_ENTITY_Mib_Non_Modular,populatingTheChassis,245,com.cisco.nm.xms.xdi.pkgs.SharedInventoryRouter:ContainmentAGI_ENTITY_Mib_Non_Modular:populatingTheChassis:ContainmentAG attributes,population completed...
    [ Di Nov 16  15:54:29 CET 2010 ],INFO ,[Thread-14],com.cisco.nm.rmeng.util.logger.XDILogger,77,com.cisco.nm.xms.xdi.pkgs.SharedInventoryCatIOS.ContainmentAGI_ENTITY_Mib_Non_Modular,g$eval,105,com.cisco.nm.xms.xdi.pkgs.SharedInventoryRouter:ContainmentAGI_ENTITY_Mib_Non_Modular:g$eval:populating ContainmentAG attributes, ends...
    [ Di Nov 16  15:54:43 CET 2010 ],INFO ,[Thread-14],com.cisco.nm.rmeng.inventory.ics.core.CollectionController,477,DP time is 15 seconds for 9.152.255.101
    [ Di Nov 16  15:54:44 CET 2010 ],ERROR,[Thread-14],com.cisco.nm.rmeng.util.logger.RMELogger,770,com.cisco.nm.rmeng.inventory.ics.invchange.AddInvChange,effect,33,Unexpected error :com.sybase.jdbc2.jdbc.SybSQLException: ASA Fehler -193: Primärschlüssel für Tabelle 'PhysicalElement' ist nicht eindeutig
        at com.sybase.jdbc2.tds.Tds.processEed(Tds.java:2834)
        at com.sybase.jdbc2.tds.Tds.nextResult(Tds.java:2156)
        at com.sybase.jdbc2.jdbc.ResultGetter.nextResult(ResultGetter.java:69)
        at com.sybase.jdbc2.jdbc.SybStatement.nextResult(SybStatement.java:220)
        at com.sybase.jdbc2.jdbc.SybStatement.nextResult(SybStatement.java:203)
        at com.sybase.jdbc2.jdbc.SybStatement.executeLoop(SybStatement.java:1766)
        at com.sybase.jdbc2.jdbc.SybStatement.execute(SybStatement.java:1758)
        at com.sybase.jdbc2.jdbc.SybPreparedStatement.execute(SybPreparedStatement.java:619)
        at com.cisco.nm.rmeng.inventory.ics.dbrep.DBRecord.insert(DBRecord.java:50)
        at com.cisco.nm.rmeng.inventory.ics.util.ICSDatabaseConnection.insert(ICSDatabaseConnection.java:91)
        at com.cisco.nm.rmeng.inventory.ics.invchange.AddInvChange.effect(AddInvChange.java:29)
        at com.cisco.nm.rmeng.inventory.ics.server.InvDataProcessor.processInvData(InvDataProcessor.java:394)
        at com.cisco.nm.rmeng.inventory.ics.core.CollectionController.run(CollectionController.java:849)
        at java.lang.Thread.run(Thread.java:534)
    [ Di Nov 16  15:54:44 CET 2010 ],ERROR,[Thread-14],com.cisco.nm.rmeng.inventory.ics.server.InvDataProcessor,448,ASA Fehler -193: Primärschlüssel für Tabelle 'PhysicalElement' ist nicht eindeutig
    com.sybase.jdbc2.jdbc.SybSQLException: ASA Fehler -193: Primärschlüssel für Tabelle 'PhysicalElement' ist nicht eindeutig
        at com.sybase.jdbc2.tds.Tds.processEed(Tds.java:2834)
        at com.sybase.jdbc2.tds.Tds.nextResult(Tds.java:2156)
        at com.sybase.jdbc2.jdbc.ResultGetter.nextResult(ResultGetter.java:69)
        at com.sybase.jdbc2.jdbc.SybStatement.nextResult(SybStatement.java:220)
        at com.sybase.jdbc2.jdbc.SybStatement.nextResult(SybStatement.java:203)
        at com.sybase.jdbc2.jdbc.SybStatement.executeLoop(SybStatement.java:1766)
        at com.sybase.jdbc2.jdbc.SybStatement.execute(SybStatement.java:1758)
        at com.sybase.jdbc2.jdbc.SybPreparedStatement.execute(SybPreparedStatement.java:619)
        at com.cisco.nm.rmeng.inventory.ics.dbrep.DBRecord.insert(DBRecord.java:50)
        at com.cisco.nm.rmeng.inventory.ics.util.ICSDatabaseConnection.insert(ICSDatabaseConnection.java:91)
        at com.cisco.nm.rmeng.inventory.ics.invchange.AddInvChange.effect(AddInvChange.java:29)
        at com.cisco.nm.rmeng.inventory.ics.server.InvDataProcessor.processInvData(InvDataProcessor.java:394)
        at com.cisco.nm.rmeng.inventory.ics.core.CollectionController.run(CollectionController.java:849)
        at java.lang.Thread.run(Thread.java:534)
    [ Di Nov 16  15:54:44 CET 2010 ],ERROR,[Thread-14],com.cisco.nm.rmeng.inventory.ics.core.CollectionController,861, Exception occured in process method while processing: 9.152.255.101 ASA Fehler -193: Primärschlüssel für Tabelle 'PhysicalElement' ist nicht eindeutig
    ICSException :: ASA Fehler -193: Primärschlüssel für Tabelle 'PhysicalElement' ist nicht eindeutig
        at com.cisco.nm.rmeng.inventory.ics.server.InvDataProcessor.processInvData(InvDataProcessor.java:463)
        at com.cisco.nm.rmeng.inventory.ics.core.CollectionController.run(CollectionController.java:849)
        at java.lang.Thread.run(Thread.java:534)
    I don't know where the German error message comes from. The whole system is English. Translation is: "ASA error -192: primary key for table 'PhysicalElement' isn't distinct'
    Thanks for your help!
    Alex

    Well known issue in LMS 2.6. Most likely you are hitting CSCsm97530. As a temporary solution you could remove and re-add problematic device from CS. To get a permanent fix you need a patch (provided by TAC).

  • I am unable to import Raw still images from a Nikon D 80 into Premiere Pro cs 4. All jpeg images ok

    I am unable to Import RAW still Images from a Nikon D 80 camera into
    Premiere Pro. All jpeg images import Ok. A web search suggests I need "plug-ins" for RAW, but I can not find  same. Any suggestions as to how to inport RAW files to PP CS 4 would be appreciated. I have just updated from Premiere Elements 4 which had no problem importing RAW still images.
    Roygo

    The way I see it (correct me if I'm wrong) but Raw is supposed to be where you have total editing control of the shot (as opposed to the camera). I believe the next step is to do the editing (i.e. color balance, exposure, etc) then make a regular image from that to use in whatever output you desire (print, web, etc.) Think of raw as the negative. Just being in raw doesn't in it self make it better.
    Edit. This is from premiere help files....
    Supported still‑image and sequence file formats
    Adobe Premiere Pro supports 8-bit per-channel (4 bytes per pixel) and 16-bit per-channel (8 bytes per pixel) still-image files. It converts images with lower bit-depths to 8-bits per channel and images with higher bit-depths to 16-bits per channel on import. High bit-depth files are supported at one single-precision float per channel (16-bytes per pixel).
    AI, EPS (Adobe Illustrator and Illustrator sequence)
    BMP, DIB, RLE (Bitmap and Bitmap sequence)
    EPS
    GIF
    ICO (Icon File) (Windows only)
    JPEG and JPEG sequence (JPE, JPG, JFIF)
    PICT and PICT sequence (PIC, PCT)
    PNG (Portable Network Graphics)
    PSD (Adobe Photoshop and Photoshop sequence)
    PSQ (Adobe Premiere 6 Storyboard)
    PTL, PRTL (Adobe Premiere title)
    TGA, ICB, VDA, VST (Targa and Targa sequence)
    TIF (TIFF and TIFF sequence)

  • LMS 4.2.4 Error RICS0001:Internal Error,unable to process the collected data from the device.

    Hi
    LMS 4.2.4 inventory collection fails with Error RICS0001:Internal Error,unable to process the collected data from the device for few devices.
    Can anyone help me out.
    Regards
    Laxmi

    They are definately supported. However such issues are usually due to device packages, if unavailable or not installed.
    Please do following :
    1. Check Admin > software centre > device updates and check any devices packages available in Cisco.com and install it and recheck.
    2. Please do a snmpwalk on problematic device on sysObjectID and share result. Following is the way to do snmpwalk :
    GUI - Open the device in Device Centre (Inventory > Tools > Device Center) and open the device with IP and from tools select snmpwalk and do it for sysObjectID (1.3.6.1.2.1.1.2)
    CLI : CD to NMSROOT/objects/jt/bin from command prompt. run command as per following syntax:
    snmpwalk -v2c -c <snmp_community_string> 1.3.6.1.2.1.1.2
    Example :
    community string = test123
    IP = 10.1.1.1
    snmpwalk -v2c -c test123 10.1.1.1 1.3.6.1.2.1.1.2
    3. Please check your device package, by clicking on the number of packages in front of Inventory, conifg and image management from :
    Admin > System > Software Center > Device Update
    Also, check device identity under edit identity option from :
    Inventory > Device Administration > Add / Import / Manage Devices
    Check my screenshots for details :
    Please check and share results.
    -Thanks
    Vinod
    **Rating Encourages contributors, and its really free. **

  • LMS Prime 4.1 RICS0001:Internal Error,unable to process the collected data from the device.

    Hello,
    I have a problem with inventory collection from several devices getting
    "RICS0001:Internal Error,unable to process the collected data from the device."
    ERROR,[Thread-20],com.cisco.nm.rmeng.inventory.ics.server.InvDataProcessor,918,Device does not exist in RME, Please check if device is already deleted

    Did you schedule an inventory collection job?
    Delete schedule and recreate it using device group.
    Cheers,
    Michel

  • Error: Unable to process the following response from FOI server

    Hi
    While integrating BI with mapviewer, I am getting the following error:
    Unable to process the following response from FOI server
    Please let me know how this can be fixed
    Thanks & Rgds
    Dipesh
    Message was edited by:
    user542575

    One more question about NSDP, Im still wondering how can NSDP work as you only need to declare nsdpInfo.setKeyColumn("xx") --xx
    Eg. My result set come from OBIEE, it hase 2 column xx and yy.
    Im just copy the sample code to translate the output into xml, the output sample is like:
    Column 1 Column 2
    440100 0
    440200 5
    440300 1
    So how can MapViewer know that the second column is the value column?
    The same question is about when the output is multiple column.

  • I'm trying to process RAW file images from my SanDisk memory card on Adobe Photoshop CS4 Extended and am unable to do so. Which level Adobe Photoshop do I need to process SanDisk images?

    I'm trying to process RAW images from my new SanDisk Ultra memory card and unable to do so. I'm currently using Adobe Photoshop CS4 Extended, is this the right one or do I need to update?

    …and you absolutely have to specify the camera model that generated those raw image files.
    2.—There's no such thing as "SanDisk images"
    3,— BOILERPLATE TEXT:
    Due to the current unavailability of clairvoyants and mind-readers in the forum, we respectfully request you supply sensible, complete details.
    If you give complete and detailed information about your setup and the issue at hand,
    such as your platform (Mac or Win),
    exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
    your settings in Photoshop > Preference > Performance
    the type of file you were working on,
    machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
    what troubleshooting steps you have taken so far,
    what error message(s) you receive,
    if having issues opening raw files also the exact camera make and model that generated them,
    if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
    A screen shot of your settings or of the image could be very helpful too,
    etc.,
    someone may be able to help you (not necessarily this poster, who is not a Windows user).
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • DNG from Pentax K5 IIs not importing/displaying properly

    I am runing LR 5.3 and PS6 on Win 7 Ultimate with latest updates as of 2/17/2014.  Some of my DNG from the Pentax K5 IIs are not importing or displaying correctly.  I have attached screenshots from LR/PS and Silkypix (Pentax Util) for comparison.  Please let me know how to correct the problem.  I will send the DNG file if necessary.

    If the JPGs are sidecars then they’d be deleted along with any DNGs you choose to delete, so you’ll have to be doubly not lazy to get the JPGs to replace the bad DNGs.
    I think if this happened to me the basic procedure I’d follow is, pending some other idea that would be easier:
    Make sure the setting to treat RAW+JPG as separate files is OFF.
    Mark/flag/rate/keyword all the bad DNGs with some unique designation, andif the JPGs are still sidecars then they’ll also have the designation.
    Filter by that unique designation.
    Select and move all these images to some other new folder from within LR using LR commands (drag-and-drop, right-click move).  If the JPGs are still sidecars then they’ll automatically be moved along with the DNGs.
    Remove these images from LR but don’t delete from the hard-drive.
    Use an OS-level command to delete all the DNGs from that folder, leaving the JPGs.
    Use an OS-level command to move these JPGs back to their original folder.
    Turn ON the setting to treat raws+jpgs as separate files.
    Synchronize the original folder with the Import new files setting enabled.
    Import these JPGs.
    Turn OFF the setting to treat raws+jpgs as separate files if you want.
    This process would reset any develop settings you’d applied to any of the images because you’re removing them from the catalog.  I think there may be plug-in that will synchronize settings from raws to jpgs but I’m not sure if it works for hidden sidecar jpgs or not.  If you were to use such a plug-in then you’d need to do it before removing the images from your catalog.
    This process is would not be easy to do if the corrupted files are scattered throughout your photos rather than in a single folder because you’d likely want to do the steps above for each folder separately.

  • Aps for processing RAW or DNG picture files

    Are there any aps for processing RAW and or DNG files on ad iPad?

    In the normal situation, LR needs to see a PS installed for it to detect the Edit In PS option is possible, so if you uninstall both, then install PS, first, then LR.  Of course with this release there may be some hiccup that requires installing either one or the other, again, but if you've uninstalled both and are reinstalling both, then install PS, first.

  • Aperture Unable to process RAW files even though finder shows a preview

    I have recently upgraded to Aperture 3.0 which decided to delete my library. Using PhotoRec i am slowly recovering all of my files.
    The files that have been recovered are .cr2 files and .jpg files. The jpegs display fine without a problem however every 2 out of 3 cr2 RAW files will not import into iPhoto, Aperture or pretty much any other RAW processing software. Aperture just says "Unsupported File Type".
    My issue is that Finder is showing a preview of the image in the icon, and is showing a preview in CoverFlow, but everything refuses to open the file. This must surley mean that the data is still intact within the .cr2 file? else Finder would be unable to display the preview of the file?
    Does anyone know how to fix this or what could be causing this issue?
    Apple please, please fix this issue with Aperture, I fear that I have lost a lot of photos in this process.
    Please help!

    Aarthek - the Canon PowerShot G2 is not supported centrally on your Mac.
    http://www.apple.com/aperture/specs/raw.html
    I've just finished importing my old archive produced by this camera. What I did was to produce fresh JPEGs (medium quality, so low file size) in the same directory as the original RAW images. I happen to have Photoshop CS3 and could easily do these in batches, but worst case, you should still have Canon's ImageBrowser suite which could do this. I then imported the JPGs for cataloguing, keywording, etc. Then, if I want to do some serious work on an image from my G2, I'll right-click the image and select +Show in Finder+ and get straight to my corresponding RAW image which I can then process in Photoshop.
    but I don't understand why the thumbnail shows up when I'm importing as though there are no issues.
    There's a small embedded JPG in the RAW files and that's what you're seeing. I think that's also what you saw on the G2's display when you were out shooting and stopped to review an image in the field.
    Regards,
    Gary

  • Unable to see RAW NEF image from Nikon D300 in CS3

    Have Camera Raw Plug-in Version 4.0 in my PS CS3 and am not able to see images from my recently purchased used Nikon D300.  I have no problems seeing the NEF images downloaded from my Nikon D80.  I typically download the images from my camera thru Lightroom 2.4.   Do I need a more recent Camera Raw Plug-in?  I want to make sure I'm still compatible with LR.   Any suggestions will be hellpful.

    Yes, you are outdated with the RAW plug in and probably not able to use the
    correct version that supports your camera.
    You have two options:
    1- upgrade to CS4 and benefit from all other good this has to offer
    2- If you won't or can't upgrade use the DNG route, DNG is a free offered
    (by Adobe) converter. The latest DNG converter will convert your D300 files
    to the open DNG format which will show your RAW (then as DNG but still the
    same quality) files and you will be able to use it in CS3.
    There is lot's of information about in on this page:
    http://www.adobe.com/products/photoshop/cameraraw.html
    Have Camera Raw Plug-in Version 4.0 in my PS CS3 and am not able to see images
    from my recently purchased used Nikon D300. 

  • Trouble converting RAW to DNG from Nikon D90

    Hi,
    I'm using CS4 and have uploaded the latest Adobe DNGConverter, 8.7.1 and still my raw photos taken with my Nikon D90 don't convert in Bridge or Photoshop.
    Anybody have ideas for what to do?
    Take care,
    Paul

    You have to convert the NEFs to DNGs with the converter and then those DNGs should work, but not the original NEFs.
    What process are you following that leads to apparent failure?  Are you creating DNGs and those don’t work, or are you having troubles even creating the DNGs?

  • How do I process raw .dng or .pef from pentax k20d into .tiff 's (or jpegs) in aperture 3?

    hi all my friends!
    how do I process raw .dng or .pef from a pentax k20d into tiffs or jpegs in aperture 3? (i have the trial only but will buy a3 if i actually can learn how to use it in 30 days...which i've failed so far)... the raw files are taking up too much space on my HDD. i understand how to change the colors, sharpness etc of the raw files. but how do i actually turn raw files into a tiff or jpeg to just keep in the library in aperture? i have no intention of keeping the raw's.. I just shoot raw to get better jpeg or tiff results.
    also I would greatly appreciate some tips how to do this in batches fast and easy. I have yet to yield images so good i will actually want to spend time perfecting them. for now i just want an easy way to turn raw files into tiffs or jpegs with some standard or completely auto mode. i can do it in camera but it is time consuming.
    and you cant convert raw to jpeg or tiff in iphoto, right?
    best regards, Joakim
    p.s. and thank you who will answer this...i can't find the answer anywhere...tried for a whole day... d.s.

    do you know if the raw files are some way made more compact when you shut down aperture? cause i mean, +20MB for a pic is a lot of space on the hard drive vs. 5MB for a jpeg or so...of course keeping your raws would be the optimum if they simply don't take that much more space than a jpeg... how does aperture do it? are the files "zipped" when not in use?
    No, the size of the files doesn't change, Aperture doesn't compress or otherwise alter the masters.
    and in either case, can you put the aperture archive/library somewhere else than on your local HD, like a portable 1 TB HD? mine is only 250 Gb or so and running low...
    This is doable and most people running on laptops use this method in one form or another. The best results are  obtained by keeping the library on the internal HD but storing the masters on an external HD. The masters in this case are referred to as 'referenced' (when the masters are in the actual Aperture library they are referred to as 'managed' )
    By putting the masters on an external disk but keeping the library on the internal you get the best of both worlds, reduced internal disk consumption and better speed accessing the Aperture library. If the library itself was on the external HD, especially if it was USB, you could notice decreased performance.
    There has been much written about this type of setup here in the discussions. Searching the list here should get many articles discussing this topic with lots of very good advice.  Also spend some tim with the User manual, Apple did a good job with it and the fist few sections really explain the various bits of the library and the different ways to set it up.
    As i wrote in my first question, is there an easy way to adjust the values of a 100 raw files automatically?
    To adjust a large number of images try this: Select one image and adjust  it as you like. Then select Metadata->Lift Adjustments, a HUD will open. Now select the other 99 images and in the HUD that opened select Stamp Selected Images, all those 99 images will now have the adjustments you applied to the first image.
    Again this is all covered in the manual.
    Good luck

  • How to: DNG colors from pentax camera are completely different in camera raw compared to pentax soft

    Hi all, i have a problem.
    I always used adobe camera raw to manage RAW files. I find it really fast and friendly compared to many other programs (i mean lightroom, pentax digital camera utility, DxO optics pro, Silkypix, etc.). It has no rivals, on my macbook pro it is absolutely faster than others.
    BUT i found a lot of differences comparing colors (not just tone, but definition inside an object with similar colors) from a DNG using camera raw vs pentax digital camera utility 4. It is a know problem by pentax people. You can check (without the camera) the problem here (see the colorcheker chart): http://www.dpreview.com/reviews/pentaxkx/page14.asp
    I can post examples of what i mean speaking of "definition inside an object with similar colors"...
    I always use the "embedded" camera profile in camera raw, finding it more similar to the pentax software. The adobe standard is really different.
    Is there a way i can bypass this issue? using pentax digital software is really boring…it's unfriendly, SLOW, with bad light adjustments and interface.
    I tried opening the DNG with pentax software and converting it to tiff: the colors are ok, but you lose a lot adjusting light etc.
    thank you all

    > I don't know anything, and haven't read anything, about the unique characteristics of Pentax DNG files.
    firmware in cameras that can create raw files in .DNG format (Pentax, Samsung, Ricoh, Leica) will write so called DNG profile in those raw files (see Sandy's comments) - those profiles are not identical to what Adobe creates to use w/ ACR/LR, but they also can be used by Adobe raw converters (you will get a little different colors)... you can extract those profiles from native DNG raw files for example using Adobe DNG profile editor... in addition, Pentax cameras (modern) can create raw files either in their own PEF format or in DNG format and Pentax suppied software (DCU) can in fact create DNG files from PEF files and unlike Adobe DNG converter DCU will do that w/o discarding any information and it will write Pentax DNG profile in those converted DNG files.

Maybe you are looking for