Unable to save using custom form in Public folder?

Hi,
Years ago I created a custom form for a Public calendar folder.  Recently I was asked to update that custom form, which I did.  Then I published it to the Public folder and changed the properties of the folder to use the new form as the default.
This all seemed to work, when we create a new record we get the custom form.  Problem is when we try to Save & Close I get the following error message:
"The item cannot be saved to this folder.  The folder was deleted or moved, or you do not have permission.  Do you want to save a copy of it in the default folder for the item."
If I hit "Yes" I think it saves in my personal calendar folder, if I hit "No" it just goes away.
I've been Googling this for a number of hours but all I find it reference to an old MS article about the mail box being full, which it isn't.
If I switch back to the original custom form I can save records all day long.  Which indicates to me that I actually do have rights and that the mail box isn't full.  I have owner rights to this Public calendar.
Any other thoughts?  I did try clearing the forms cache but that didn't seem to have any affect.
Incidentally, I was also asked to update a customized form on a different Public calendar folder and that went off without a hitch. 
Thanks in advance,
Linn

Make sure you have the right values in the Authentication Plugins in your Custom Form Authentication Scheme. You may have used different field names in your HTML form than the ones that are in your Plugins. Also, make sure the webgate.dll is protected by a Policy Domain. If all is set up right, and it still doesnt work, bounce everything including the IIS server.
I have seen situations with IIS where changes in the Access Server configuration are not picked up until you bounce the webgate / IIS server. This doesnt seem to be the case with Apache or Sun JSWS.
TGF

Similar Messages

  • Unable to open java custom form in R12 instance

    Dear friends,
    I am unable to open java custom form from front end.
    Navigation as follows:
    SYSTEM ADMINISTRATOR --> UM_SHIPPING --> ORDERS LOOKUP.
    Can anyone please look into the issue please.
    The error as follows:
    Error page
    you have encountered an unexpected error. please contact the system administrator for assistance.
    Thanks,

    I am unable to open java custom form from front end.
    Navigation as follows:
    SYSTEM ADMINISTRATOR --> UM_SHIPPING --> ORDERS LOOKUP.Was this working before? If yes, any changes been done recently?
    Did you follow the steps in (What Setup is Required to Create Custom JSP Pages to Run on the Ebusiness Suite 11i and R12+? [ID 884200.1])?
    Can anyone please look into the issue please.
    The error as follows:
    Error page
    you have encountered an unexpected error. please contact the system administrator for assistance.Please check Apache log files for details about the error. Please also check if any errors are reported in the database log file.
    Thanks,
    Hussein

  • IW32: Sending notification mail using custom form.

    Hi All,
      In the header tab we have notication field. when we click on change option and click on send receipt information by defalut form 'QM_REPLY' will come.
    Here my requirement is, i have to use custom form in place of standard form.
    Please tell me how to do it ASAP.
    Regards,
    Srikanth.

    Hey PJ,
    I manage to send out the email using the htm type. However, instead of having a hyperlink saying click here and it link to another page, i am getting something like this in the email.
    Click Here <http://www.google.com> 
    In my code, i write 
    <A HREF="http://www.google.com">Click Here</A>
    , but the content just turn to above. What i wan is a CLICK HERE link and will link to google.
    Thanks.
    Regards,
    Bryan.

  • How to use custom forms created in SharePoint 2007 to work in SharePoint 2010

    Hi,
    We have created some custom forms  in SharePoint 2007 (for add a New item and Edit item for some list and libraries) after migration to SP 2010 we found out thet we can use those custom forms because the document versions are 12.0.0.0 which
    should be 14.0.0.0  in  SharePoint 2010
    Could someone please tell me if we can migrate forms from SP2007 to SP2010 as well?
    I even tried to change document Version and content but still not working! Do we need to recreate those forms in SP2010?
    Thanks 
    Kate

    Hi Khojasteh,
    How did you do for changing document version and content?
    Whether you tried to set the forms update automatically, then re-publish them.
    There are some similar posts for your reference:
    Migrate Infopath 2007 to SharePoint 2010 site
    Unable to open infopath forms when migrated from MOSS 2007 to sharepoint 2010
    Migrate browser based InfoPath Forms with code behind from MOSS 2007 to SharePoint 2013
    Plan to upgrade form templates during an upgrade to SharePoint Server 2010
    Best Regards,
    Wendy
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Wendy Li
    TechNet Community Support

  • Unable to open a custom form. FRM-47023 error.

    Hello experts,
    I am currently in a 11i to R12.1.3 upgrade and trying to open a custom form in R12. I compiled the form in forms builder 10.1.2.3.0 and in the db with no errors. When I try to open it in the apps it displays the following error messages:
    1) FRM-47023: No such parameter named G_QUERY_FIND exists in form ....XXX_CUSTOM_FORM.
    2) FRM-40105: Unable to resolve reference to item PARAMTER.G_QUERY_FIND.
    3) FRM 41052: Cannot find Window: Invalid ID.
    4) FRM-40700: No such trigger: menu_to_appcore
    5) FRM-47023: No such paramter named HR_MODE exists in form AMZ_RESPAPPRV.
    6) FRM-40105: Unable to resolve reference to iem PARAMETER.HR_MODE.
    I do have all the pl/sql libraries downloaded. If I didn't then forms builder would complain and not let me compile.
    I am not sure what is causing it. Any ideas what is causing it?
    Any help is much appreciated.
    Thanks

    I am using Windows 7.
    I logged in as applmgr ran the following command:
    frmcmp_batch module=AMZ_RESPAPPRV.fmb userid=apps/xxxmonkey o
    utput_file=AMZ_RESPAPPRV.fmx module_type=form compile_all=yes
    output message:
    Forms 10.1 (Form Compiler) Version 10.1.2.3.0 (Production)
    Forms 10.1 (Form Compiler): Release - Production
    Copyright (c) 1982, 2005, Oracle. All rights reserved.
    Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
    With the Partitioning, Oracle Label Security, OLAP, Data Mining
    and Real Application Testing options
    PL/SQL Version 10.1.0.5.0 (Production)
    Oracle Procedure Builder V10.1.2.3.0 - Production
    Oracle Virtual Graphics System Version 10.1.2.0.0 (Production)
    Oracle Multimedia Version 10.1.2.0.2 (Production)
    Oracle Tools Integration Version 10.1.2.0.2 (Production)
    Oracle Tools Common Area Version 10.1.2.0.2
    Oracle CORE 10.1.0.5.0 Production
    FRM-18108: Failed to load the following objects.
    Source Module:APPSTAND
    Source Object: STANDARD_PC_AND_VA
    Source Module:APPSTAND
    Source Object: STANDARD_TOOLBAR
    Source Module:APPSTAND
    Source Object: STANDARD_CALENDAR
    Compiling package specification APP_CUSTOM...
    No compilation errors.
    Compiling package specification APPROVER...
    No compilation errors.
    Compiling package specification APP_CUSTOM...
    No compilation errors.
    Compiling package body APP_CUSTOM...
    No compilation errors.
    Compiling package specification APPROVER...
    No compilation errors.
    Compiling package body APPROVER...
    No compilation errors.
    Compiling WHEN-WINDOW-RESIZED trigger on form...
    No compilation errors.
    Compiling FOLDER_ACTION trigger on form...
    No compilation errors.
    Compiling FOLDER_RETURN_ACTION trigger on form...
    No compilation errors.
    Compiling KEY-HELP trigger on form...
    No compilation errors.
    Compiling KEY-DUPREC trigger on form...
    No compilation errors.
    Compiling KEY-EXIT trigger on form...
    No compilation errors.
    Compiling KEY-EDIT trigger on form...
    No compilation errors.
    Compiling KEY-COMMIT trigger on form...
    No compilation errors.
    Compiling KEY-CLRFRM trigger on form...
    No compilation errors.
    Compiling KEY-MENU trigger on form...
    No compilation errors.
    Compiling KEY-LISTVAL trigger on form...
    No compilation errors.
    Compiling WHEN-WINDOW-CLOSED trigger on form...
    No compilation errors.
    Compiling POST-FORM trigger on form...
    No compilation errors.
    Compiling PRE-FORM trigger on form...
    No compilation errors.
    Compiling ON-ERROR trigger on form...
    No compilation errors.
    Compiling WHEN-NEW-FORM-INSTANCE trigger on form...
    No compilation errors.
    Compiling WHEN-NEW-RECORD-INSTANCE trigger on form...
    No compilation errors.
    Compiling WHEN-NEW-ITEM-INSTANCE trigger on form...
    No compilation errors.
    Compiling WHEN-NEW-BLOCK-INSTANCE trigger on form...
    No compilation errors.
    Compiling QUERY_FIND trigger on form...
    No compilation errors.
    Compiling CLOSE_WINDOW trigger on form...
    No compilation errors.
    Compiling ACCEPT trigger on form...
    No compilation errors.
    Compiling PRE-INSERT trigger on APPROVER data block...
    No compilation errors.
    Compiling PRE-UPDATE trigger on APPROVER data block...
    No compilation errors.
    Compiling ON-INSERT trigger on APPROVER data block...
    No compilation errors.
    Compiling ON-LOCK trigger on APPROVER data block...
    No compilation errors.
    Compiling ON-DELETE trigger on APPROVER data block...
    No compilation errors.
    Compiling ON-UPDATE trigger on APPROVER data block...
    No compilation errors.
    Compiling WHEN-VALIDATE-RECORD trigger on APPROVER data block...
    No compilation errors.
    Compiling KEY-DELREC trigger on APPROVER data block...
    No compilation errors.
    Compiling WHEN-VALIDATE-ITEM trigger on APPROVER_NAME item in APPROVER data block...
    No compilation errors.
    Compiling KEY-LISTVAL trigger on EFFECTIVE_START_DATE item in APPROVER data block...
    No compilation errors.
    Compiling KEY-LISTVAL trigger on EFFECTIVE_END_DATE item in APPROVER data block...
    No compilation errors.
    Compiling WHEN-VALIDATE-ITEM trigger on EFFECTIVE_END_DATE item in APPROVER data block...
    No compilation errors.
    Created form file AMZ_RESPAPPRV.fmx
    Edited by: user578908 on May 2, 2011 2:03 PM

  • Unable to close some custom forms

    Hi Gurus,
    We did application migration from Hp-Unix to Sun Solaris. Oracle apps 11.5.10.2 with database 10.2.0.4 and application working good with few issues.
    Issues:
    1. Few custom forms ( message Forms) unable to close. If we close by clicking X mark on top right corner, it does not close can just minimise.
    2. Couple of Custom forms does not open even we have .fmx in the custom folder.
    Need some suggestions on this issues.
    Thank You.

    f60gen module=ARXCUDCI.fmb userid=apps/apps output_file=/ul01/app/applmgr/lasrx/au/11.5.0/forms/US/ARXCUDCI.fmx
    Compiling ON-DELETE trigger on CODE_ASSIG_HIST data block...
    No compilation errors.
    Compiling WHEN-BUTTON-PRESSED trigger on BP_CLOSE item in CODE_ASSIG_HIST data block...
    No compilation errors.
    Compiling WHEN-NEW-ITEM-INSTANCE trigger on CURRENT_RECORD_INDICATOR item in CODE_ASSIG_HIST data block...
    No compilation errors.
    Compiling WHEN-MOUSE-UP trigger in FOLDER_PROMPT_MULTIROW property class...
    No compilation errors.
    Compiling WHEN-BUTTON-PRESSED trigger in FOLDER_OPEN property class...
    No compilation errors.
    Created form file /ul01/app/applmgr/lasrx/au/11.5.0/forms/US/ARXCUDCI.fmx
    Thanks You.

  • Error while Creating user using Custome form

    Hi,
    I created a custom form same as create user form
    updated in xlDefaultAdmin.properties,xlWebAdmin_en_US.properties,struts-config.xml
    on this custom every thing is working fine but when on submit(Create User) it gives me below error
    in Admin Console : You do not have permissions to perform this operation.
    in App server log: maoRejections:You do not have permission to insert this object.

    My response is based on the following assumptions:
    Your custom form is similar to that of CreateUser form in all manners. The logic at the back-end has been written by you as well. As soon as you get all the values you call the createUser API of OIM to create the user. You have wriiten your custom action classes as well.
    The insert error may be due to the reason that the user which you are using to create the user doesn't have sufficient permissions. In other words, if this is done through Java code then while instaniating the API, the user used must be missing these permissions.
    If the error is due to this permission for users then we can give these additional permissions to individual users, if in case its not and you have some other scenario then just give me more details, probably I can help you for it.
    Thanks
    Sunny

  • 500 error when using customized form

    TMG 2010 Service Pack 2    
    Server 2008 R2 Service Pack 1
    Only one member in the array
    I have enabled "Use customized HTML forms instead of the default" in a listener. That works fine, as long as I stick to the original custom folder: "ISA".
    But once I make a copy of the default folder, calling it "ISA-2" and try to use that copy, the error is
    Error Code: 500 Internal Server Error. The data area passed to a system call is too small. (122)
    As far as I can see, the copy - ISA-2 - is a perfect copy of the original - ISA. (The error message is the same as the one I get if I specify a folder that does not exist at all.)

    Hi,
    Was the copy file ISA-2 in the same folder with the original ISA custom folder? If yes, please enter "ISA-2" on the Forms tab, click appy and restart the TMG Firewall Service to apply the changes to TMG.
    Best regards,
    Susie

  • I am having a problem moving files from a iMac  in location mac in another location.  I have tried using Dropbox and the Public folder in the i disc.  When I drag the files into dropbox they become alias' and I can't open them at the other end beca

    I am having a problem moving files from an imac in one location to an imac inanother location.  I have tried using Dropbox which is installed in both locations but when i drad a file ino yhe app it becomes an alias.  When I get to the other location it says I can't open the file because the " original application that created it is not present".  This is despite the fact that the app that created both files is installed in both computers.  If I use the Public folder in the idisc, when I get to the other location the file isn't there.  Am I forgetting to turn something on or off?  Should I manually sync the Public folder and if so how? Thanks
    Message was edited by: stephenfromdelray beach

    So now that's two of us.  Hopefully, someone has an answer. 

  • Unable to save a query view under favourites folder

    Hello all,
    We have the following issue: when we generate a query view we are not able to save it under favourites because the folder does not appear. We don´t know if it is a question of authorizations or what is going wrong.
    Any ideas?
    Thanks in advance.
    Carmen

    <FONT FACE = "Tahoma", Font Color = "Blue">
    Hi<br>
    Try to do the same thing for the same user from some different machine. If the same issue comes then it is not a Front End issue but it is likely to be an Authorisation issue. Get help from BASIS Team.
    <br><br>
    Hope it helps.<br>
    Cheers Abhijit</FONT><FONT FACE = "Verdana", Font Color = "Red">
    Please assign Reward Points if I deserve them in your opinion
    </FONT>

  • Unable to save LiveCycle PDF form in Adobe Reader: Steps on Adobe don't work

    I went to follow the steps provided in the help video on Adobe. Two issues I couldn't solve:
    How do you login to LiveCycle via the web as an admin? How do you get to the LiveCycle admin portal?
    The local host (http://localhost:8080/ReaderExtensions) is unavailable. Every time I try to go there I get a 500 error message page. What is the new local host?
    The steps I followed were:
    So according to a video on its official website, in order to enable LiveCycle forms in Reader so they can be saved you need an Adobe Reader Extension which means we need a Reader Extension Credential loaded onto the server. For that you need to purchase a Reader extension license from Adobe.
    However, there is a trial version Eric or Jay could instal for me on the Remote Desktop. They can find it at:
    http://www.adobe.com/devnet/livecycle.html
    They will want to download the “Trial Reader Extensions Certificate” under “Downloads and updates”. It’s a 30 day trial which should work fine for our needs.
    The credential then needs to be imported into the Adobe Administrator. To do that they need to:
    Login to LiveCycle as an admin (via the web?)
    Go to “Settings"
    Go to “Trust store management”
    Go to “Local credentials”
    Click “Import"
    Trust store type should be “Reader Extensions Credential”
    Give it a name (i.e. Alias)
    Browse to credential file
    .pfx is the credential file
    .txt is the password
    Right-click the .txt
    Click “Open”
    Copy password from notepad
    Close notepad
    Open the .pfx file
    Paste in password copied from .txt file under “Password” in import form
    Click OK
    Then there’s something about going to Adobe LiveCycle Reader Extensions program (http://localhost:8080/ReaderExtensions). Don’t ask. I’m personally lost at this point.
    In Extensions program they need to:
    Select the Extensions credential
    Click the check box next to
    “Basic form fill-in”
    “Import and export data”
    “Submit outside of web browser”
    “Database and web service connectivity”
    “Digital Signatures”
    “Commenting”
    “Online Commenting"
    Set “Draft Level” to “Final”
    Click the check box next to “Full Save”
    “Browse” to the SNAP Survey I created and saved on the server.
    Click “Apply”
    In new window that appears:
    Click “Download”
    Save back to the server

    If you're on the machine that's running LC the administrator console is http://localhost:8080/adminui
    If you're not able to get to localhost:8080/ReaderExtensions then I suspect the LiveCycle server is not on your machine.  If that's the case you'll have to find out the name of the server running LiveCycle and connect using that name instead of localhost.

  • Unable to Save Adobe Acrobat Form

    I have created a form in Adobe Acrobat Pro X and I set it to allow users to enter data and save it. 
    However, when they open the file and enter data it will not allow them to save the file.
    Any ideas?
    Thanking you in advance!!!!!

    Bernd - thank you so much for your reply.
    I have previously done everything that is in that video to create a form where users can enter their data and save the form.
    When I sent myself the form I created to work and I opened it with Adobe Reader 9.4.3, a dialog window pops up and says:
    Please Note:  You cannot save a completed copy of this form on your computer.
    If you would like a copy for your records, please fill it in and print it.
    Any ideas why?
    Thanks!
    Ty

  • Custom Form Entry and how to properly use it on a folder

    Hello,
    I created a custom form based on an example from coolsolution, and I want to use it in one folder.
    I does select it within folder configuration.
    The problem is that when i create an entry, my form appears, but when I click on OK, it's the old form from the example I found which appears. Then, if I try to modify the entry, I come back to my form, but all the data I entered have been deleted.
    In the form editing tool, I deleted all the old fields (from the example). But still teaming found them somewhere.
    Could you help me and tell in which step I made a mistake ?
    thanks,
    Guillaume

    Start with a new form. When in the Form designer, notice there are two primary sections: Form and View
    Add your elements to the Form, for instance a text box.
    Then go into the view and add the same text box (you will see it in the list on the right hand side) to the view.
    Now try to use this form in the folder to create an entry.
    Does it work?

  • Why won't FIREFOX save my HISTORY settings of USE CUSTOM settings?!!!

    This is very very annoying. I'm ready to throw this program down the bit bucket.
    I use it to access facebook and play farmville. I need it to REMEMBER things so that every time I load farm ville it doesn't have to get stuff from their server..
    Every time I open fire fox, and go to face book, and load farmville I get a message that says I can load faster if I allow it to store data on my Computer..
    I go to firefox settings and find ONCE AGAIN my History preferences will NOT save "USE CUSTOM SETTINGS".
    I have to change it every time. I have both 32 bit and 64 bit Nightly (beta) versions on my computer.
    I have totally removed both, restarted windows 7, restarted it again, re-installed fire fox and it STILL happens...
    Why? I will be darned if I will use explorer, but at least it SAVES the settings and doesn't get them screwed up!

    ''cor-el [[#answer-664256|said]]''
    <blockquote>
    Don't get confused:
    If you see "(Never) Remember History" then that means that all history and cookie settings are set to the default value (i.e. cookies are enabled).
    The "Use custom settings for history" selection allows to see the current history and cookie settings, but selecting this doesn't make any changes to history and cookie settings.
    Firefox shows "Use custom settings for history" as an indication that at least one of the history and cookie settings is not the default to make you aware that changes were made.
    If all History settings are default then the custom settings are hidden and you see "Firefox will: (Never) Remember History".
    "Never Remember History" means that Private Browsing is active and "Always use private browsing mode" gets a checkmark.
    "Use custom settings for history" stays selected if at least one of the History or Cookie settings is not the default to make you aware that changes from the default setting have been made.
    </blockquote>
    OK so I agree I was confused. What is confusing me even more is the number of times sites tell me I need to set my cookie settings to accept when as far as I can see it already is.

  • Attach a customized form to the std BSP application

    Hi,
    We have a requirement, to replace the std form linked to the std BSP application with the customized form.
    We have replaced the form in the table V_SCENARIOHEAD, even though we are unable to see our customized form, still its showing the std form.
    Would anyone give me a clue for the above problem.
    Regards
    Sirisha

    No it is not possible to have one party fill the form and another contribute attachments. You might consider using two forms. One for the applicant and one for people submitting letters of recommendation. You would then have to correlate the two types of submission in a manual process.
    Andrew

Maybe you are looking for