Unable to see builling Due list in VF04

Hi ,
I have created a Billing document using VF01 for a sales order. Once created in transaction VF04 i have entered the sales area and checked the order related check box and today's billing date but the order does not appear in the list.
any pointers to this.
Regards,
Bhanu.

Hi,
In VF04 , In the SD document field , fill it with delivery document  number and then check the check box Delivery related  and execute..
Plz try this way and see......
Regards,
Nagaraj

Similar Messages

  • Unable to see To Do list in iCal

    Any time I attempt to look at my To Do list in ical by clicking on the pin icon in the lower rt corner of the ical screen, the application freezes. I am unable to see my to do list at all. How can I fix this
    Thank you all.

    Hi,
    In VF04 , In the SD document field , fill it with delivery document  number and then check the check box Delivery related  and execute..
    Plz try this way and see......
    Regards,
    Nagaraj

  • Unable to see web service listed  while  creating the form on webservice

    Hi All,
    i created a web service reference and tested it and i m even getting the response of it .
    but i m unable to see the webservice being listed ...while creating a form on webservice .
    whereas if i create a process on webservice .. i can find webservices in the webservice list .(.the webservice which i created in the shared component)
    can anyone help me ...
    Thanks & Regards,
    Nandini Thakur.

    that should be an easy one. you might not have the GP roles needed. give to your user the caf roles in the UME

  • Due list for Billing type: IV on VF04

    Hi Experts,
    Please give your suggestion for the below issue on VF04.
    1. My scenario : STO between two plants
    Purchase order->Delivery-> Billing (JEX-Profoma Invoice)-> J1IIN (Excise Invoice).
    The scenaio is ended in Excise Invoice (J1IIN) with reference to the JEX-Proforma Invoice.
    When I run the Billing due list, I am getting the list of deliveries which I created for STO. But it's all showing for the Billing type: IV not for JEX.
    My question here is, why I am getting the due list for IV (actually it should be for JEX). This is creating problem whenever the user to see the due list for F1 and F2 and others, including these the system is showing for IV which is not relevant.
    Please suggest how to remove IV from the billing due list. Is there any setting in VTFL-Copy controls?.
    Regards,
    Vijay

    Hi,
    Thanks for your reply.
    My scenario is very clear that STO-Purchase order (UB)-> OBD (Delivery type: ZNL)->JEX-Proforma Invoice->Excise Invoice (J1IIN).
    The suggestion you have given for the Sales Document type: DL which I am not using. The settings which is there in VOV8 is not relevant.
    Regards,
    Vijay

  • Problem with TCode VF04, Billing Due List

    Hi,
    In billing due list (Transaction VF04)  we find that when the sales orders are displayed on execution of this transaction and we select all the sales orders and click on collective billing button, very few of them are included in the proforma invoice. Earlier all of those selected used to become part of proforma invoice.
    I have tried debugging after selecting all the sales order and clicking on the collective billing button (all of which is standard SAP code), but cannot understand
    why some of the sales order are included in the proforma invoice and why some are not included.
    Any help would be greatly appreciated.
    Thanks in advance.
    Mick

    Thanks Ganesh. All are order type ZO05. These are document sales orders (DSO). This is a cutomised type of sales order.
    However this is the 1st time we have got such a issue when we select all the sales orders and only few of them selectively become part of a proforma invoice.
    Your help would be greatly appreciated.

  • Clear Billing Due list.

    Hi Experts,
    We have few LO deliveries on billing due list. All these LO deliveries used for transporting some text material to one of our plant located at other location. The item category for this LO delivery is DLTX, which has billing relevance as delivery related,
    Once we saw these documents on billing due list, we changed the billing relevance of DLTX to not relevant for billing. now we have no problem.
    But the changes re not applicable to the existing documents, still these are showing up in the billing due list, i need help on how to clear these documents from billing due list.
    help is appreciated.
    Venkat

    hi
    first delete the delivery documents after reversing the PGI
    cuz the changes will not take place for the already created documents.
    if possible change the item category. i mean delete it and reenter the item category in the sales order.
    continue with the delivery process.
    then check if you can see them in the due list using VF04.
    regards
    ravi

  • Unable to see process activities in component palette

    Hi
    I am unable to see the diagram view of BPEL(Even after successful migration from 10.1.2)
    I am using 10.1.3 JDev
    I am unable to see Process activities list in the componenet palette
    Can anybody help me ...
    Thanks
    -Praveen

    yes got the same issue but hasnt gotten the solution yet..

  • Billing due list missing order total amount

    The billing due list in VF04 doesn't show the order total dollars. What's some of the ways that you've delt with this? Custom report? Another canned report?

    Hi  Mark,
    Create a Z transaction for eg: ZVF04 with the help of abaper and you can define the input out screen as per your requirement.
    In standard transaction it is not possible .
    Regards,
    Krishna O

  • Item not relevant for Billing but still exist in Billing due list VF04

    Hi Experts,
    I am experiencing an issue where this is an STO scenario.
    The PO->DN->PGI->GR (Receiving plant) where there is no invoice required as its with the same company.
    However, I can see there is one Delivery still getting reflected in VF04 due list.
    Standard Delivery type NL has been used and already checked the item categoy relevance and its
    maintained as J ( Relevant for deliveries across EU countries.) I dont think so this was billed earlier as I had already checked the Deliveries created with same item category for past six months and they have not been billed.
    Is there any other settings that needed to be checked apart from item cateogry and verifying how the same combination of Delivery type and item category worked earlier?
    IBest Regards,
    Ramesh

    Dear Ramesh,
    You may be right that with the same item category settings, there were no billing item generated (with the billing indicator as J in your Item Category) earlier. But how now it is happenning the other way round.
    Here are the reasons:
    The outbound delivery is relevant for billing if: (YOUR PRESENT CASE)
    1. The Plants abroad active field is selected (found in Customizing under Financial Accounting -> Financial Accounting Global Settings -> Tax on Sales/Purchases -> Basic Settings -> Plants Abroad -> Activate Plants Abroad)
    2. Country of departure (country where the plant is located) and destination country (country where the ship-to party is located) need to be different EU countries.
    So, if you dont satisfy the above two conditions you will not get the billing item and that's what has happenned in your past 6 Months.
    Regards
    Edited by: SAP2020 on Nov 13, 2009 4:41 AM

  • Subcontracting shipments are on VF04 billing due list

    Hi All,
    How we can prevent the subcontracting shipments (delivery) document in VF04 billing due list.
    Please advice how we can not see them in VF04 billing due list.
    Thanks,
    Naveen

    Hi,
       You can check as follows:-
    - Check what is the item category in Delivery document - Guess its LBN / LBR
    - Goto VOV7- make this item cateogy as "Not relevant for Billing"
    - Delete the copy control if exist in VTFL- between sub contracting delivery type - Billing type, if exists
    now test with fresh cycle.
    Sub,contracting delivery will not show in VF04 List.
    Regards,
    Reazuddin MD

  • Quotation is appearing in Billing due list: VF04

    Dear gurus,
    I am facing an issue with VF04. I am using a scrap process: Quotation --> Order --> Invoice. Now when I am using VF04 for Order related billing, Quotations are appearing in billing due list which should not be. Please guide me how can I resolve this issue.
    Awaiting your feedback.
    Regards.

    Hi
    In the standard system the item category AGN is NOT relevant for billing.
    You can check in your client 000 to confirm it it delivered with no billing
    relevance in VOV7.
    If it was set to billing rel 'B' when the quotation was created then that document
    will have a billing relevance (VBAP-FKREL = 'B') in this case changing the
    billing relevance in VOV7 will not correct that document in retrospect. 
    When the VBAP-FKREL is filled then a billing index will be generated for
    the line. You can check this in table VKDFS. When you have an entry in
    table VKDFS the document will automatically appear in VF04.
    You have to
    1) correct the customising TVAP-FKREL = ' '.
    2) Adapt the billing relevance in existing documents to current customizing
        See report ZZFKREL0 from note 127514.
    3) Run RVV05IVB to remove the unwanted VKDFS entries
    Hope thisw helps you further
    All the best
    Brian

  • Third party sales orders are not showing in Billing due list (VF04 )

    Hi,
    In Billing due list Third party sales orders are not appearing because VKDFS table those entries are there. How can we get Third party sales orders in VKDFS table as well as VF04 ?
    Please suggest me.
    Regards,
    KUR

    Hi Kur & Sandepp,
    Check this notes:A) Note 210500 - Billing status of a third-party item,B)2) Note 210561 - When is a third-party item displayed in VF04.
    Re
    Regards,
    Madhu.

  • 3rd party SO with rejected item appears in billing due list ( VF04 )

    Hi
    There are 7 items in a SO ( 3RD PARTY PROCESS ) . One of the items ( POSNR 030 ) is rejected  ( reason for rejection is applied at the item level ). The item is rejected from the linked Pur Req & PO as well. For this rejected item there is no GR doc
    The balance items on the SO are invoiced.
    Problem : This SO still appears appears in the billing due list.
    Expectation : This SO should not appear in VF04
    Other details : Item cat TAS billing Rel B. Billing qty VTFA is E & the update doc flow is checked
    Things tried :
    1) In debug mode changed the overall billing status in VBUP & VBUK to C
    2) In SA38 executed reorganisation of index prog ( RVVI50 - -- ), SDVBUK00.
    Pl. help

    Hi
    I have done the things suggested by Caprin + Sanjeev Kumar. No help
    Here is additional info. . As i am working on this issue i could replicate it in the quality server . I have found out how the issue was caused.
    There is a inconsistency between PO delivery date & SO req delivery date. In 3rd party orders the Sch line date is derivied from Vendor info records. The user created SO & PO .The SO got its Sch line date from info record. Then the user manually changed the Requested del date on the SO beyond the sch line date derived from the info record & at the same time leaving the Del date on PO untouched. This has resulted in mismatch between the PO & SO at the same time weird looking sch lines on SO ( the order + rounded qty is on the later date whereas the confirmed qty on the 1st sch line ).
    I feel if somebody can suggesta program to bring in sync the VBAP + VBEP + PO line item tables i think it will solve the issue

  • Unable to see the deployed webservices in websevices list

    In SAP EP System some of the APIs are not exposed to clients and those APIs needs to be called thru webservices (like get all Roles names from the SAP-EP system, add a role to user in SAP-EP system, Remove a ole from the User in SAP EP system, get all assigned Roles of a User in SAP EP system, get all users for a role in SAP-EP system, and get users for a group in SAP-EP system).
    To achieve the above functionality, we have developed the portal (.par file) which will call the SAP EP APIs using web services.
    We have developed a piece code (.par file) in net viewer Developer studio 2.0.9; we deployed /tested  this .par file on to SAP EP6 SP2 successfully. Now, we need to test this .par file in SAP EP6 SP13 but we are not able to succeed in deploying this file like how we are doing it in SP2. After successful deployment of the PAR file we are unable to see the particular webservice in the webservices list.
    For deploying the PAR file we followed the following navigation steps:
    1.login into SAPEP as sapadmin.
    2.click the systemadministrator tab.
    3.click the support tab.
    4. select the portalruntime link.
    5.click on the AdministratorConsole link.
    upload window will open where we upload the PAR file.
    For checking the uploaded Webservices we followed the following navigation steps:
    1.login into SAPEP as sapadmin.
    2.click the systemadministrator tab.
    3.click the support tab.
    4. select the portalruntime link.
    5.click on the soapadmin link.
    In case of SP13, we are not able to see the uploaded webservices. But, when we deploy .par file it “says deployed successfully” (not throwing any errors).
    Edited by: praveen bikumalla on Jan 21, 2008 7:38 AM

    If we restart the services that is there in Systemconfiguration->servicesconfiguration->Applications i am getting the following error
    Server 1337850:Error in the listener class com.sap.ip.portal.admin.portalanywhere.QueryHandler during the process of handleTopic.

  • Unable to see field list in Excel 2013

    Unable to see a list of fields to choose from when creating a pivot table.  I only see the field table.
    I have tried this ActiveWorkbook.ShowPivotTableFieldList =True and received the following message
    We found a problem with this formula, We couldn't find a range reference or a defined name.

    Hi,
    Did the issue occur in the special file or all the Excel 2013 file?
    If the issue occur in the special file, it might be caused by the file self, I recommend you copy/paste it to a new/blank file to test.
    If the issue occur in all the Excel 2013 file, it might be caused by the Excel15.xlb corrupted. It is located in your Windows user profile which varies with OS (Documents and Settings or Users).
    C:\Documents and Settings\Username\Application Data\Microsoft\Excel
    C:\Users\UserName\AppData\Roaming\Microsoft\Excel.
    Rename the file (Please note: If you don't backup it, you will lose any custom settings you may have made for Excel.) and then Excel will recreate it the next time Excel is opened. 
    If the issue still exists, please try to share us a sample file through One Drive, I want to test it.
    Regards,
    George Zhao
    TechNet Community Support

Maybe you are looking for