Unable to send E-mail notification. [10054]

Opening a report in the Backup History and scrolling to the bottom, has anyone ever seen this message: - Test - Unable to send E-mail notification. [10054]? I am wondering what caused this problem as other backup sets on the same Source PC had completed and sent the email with the comment "E-mail notification sent."

I just had this happen again. I tried the following: Hold CTRL + Shift and click Preferences (to the left, under Settings)Click the button "Stop all LMIB processes"Wait. Then open console and try the backup set again.Now it is sending the emails.

Similar Messages

How to send E-Mail Notification executing through workflow?

hi All
I want to send E-Mail Notification executing through workflow in MDM Data Manager?
I have tried it, But still i am unable to send E-Mail Notification?
i will explain, how i have tried?
1) I have created the simple workflow with the following components
they are in sequence
start--> process-> notify--->stop
2) owner of the workflow is Admin and launcher of the workflow is Admin and i have given email id to the Default Admin user in the console.
3) i have created another user (i.e. User2) with default roles as like as Admin and i have assigned User2 to the process component in workflow and I have created e-mail address for the User2 in the console.
4) i have created another user(i.e.User1) with default roles as like as Admin. and give e-mail address,under the notify component User1 is selected in To Field.
5) stop component as usual
coming to configuration part about the SMPT server in MDS.ini file
1) in mds.ini file for the MailServer=, I have given SMTP Server name once and restarted the server and executed the workflow, but not worked
2)in mds.ini file for the MailServer=, i have given SMTP Server IP Address and checked the port,and we have configured the host file also and restarted the server and executed the worflow , but not worked
In all the ways i have executed and tried to send E-Mail Notifications through workflow, But I didn't
can any one help where i have went wrong, so i can rectify it
what actually we have to give in mds.ini file? is any other cofiguration required for it?
if any one have any solution for it , can you please explain me in step by step
Thanks in Advance
bharat.chinthapatla

Hi Bharat,
your steps seems to be correct. Just try to ping your mail server, to verify if your mail server is running up, besides note that mdm go throw port 25 for sending emails, so please check if you are able to send emails using port 25 in your network.
Regards,
Vito

E72- Unable to send e-mail from work mailbox

I am unable to send e-mails from my work e-mail through my E72 although it receives perfectly. I have been in contact with Nokia via e-mail for the last 2 weeks and they have sent several suggestions to solve the issue but nothing is working. I have set-up my work e-mail on my husbands Blackberry with the same settings and can receive and send perfectly. From that I conclude there is no issue with the settings I have or my work e-mail but with
Nokia!! The latest 'help' I have received was to download a patch but I have no idea how to do this and get it onto my phone. So far Nokia have not replied to me.
Any suggestions how to get this to work would be greatly appreciated

If you're using a much older firmware, updating the phone would be a good idea. Find the Software Updates section of nokia.com and type your phone model. If you can't do an over-the-air update, download and install either the OVI Suite or the standalone Software Updater. This may hard reset the phone, so back up anything important with OVI Suite first.
Ignoring firmware for now, IMAP and URL's are like apples and oranges. If you work for a small company, the server may always be called " mail.mycompany.com", but IMAP will never use an HTTP or HTTPS prefix. URL's are typically associated with Microsoft Exchange servers. Within the email program, check Options -> Settings -> Mailbox settings -> Mailbox settings -> Advanced mailbox settings. Are "Outgoing email settings" set to something like
User authentication: Same as for incoming
Outgoing mail server: <compare to the setting for the Incoming server name; in a small company this will likely be the same>
Since you're getting far enough for the mail sever to reject your connection, the other settings should be fine as-is.
It does look like an authentication issue, so I'd say you're either hitting the wrong server or there's a bad username or password in there somewhere. If the Blackberry works with an IMAP connection, then you should be using the same server name(s), and user/password.
If all else fails, you can always try removing and readding the mailbox completely. Choose Menu -> Applications -> Email -> Settings -> <highlight your work account> -> Options -> Remove mailbox. And then set it up from scratch. I hope that helps a little!

Why am I unable to send e mails from my IPhone or IPad and get message rejected from outgoing server, message placed in outbox

Why am I unable to send e mails from my iPhone, and get message rejected by server and message put in outbox. I have tried changing server ports but to no avail. I am not very technically minded so any suggestions in laymans terms please. This is a big problem as I work away frequently and need to answer e mails. This also happens when at home and on my own wifi.

Hey Pam3008
The article below will give some troubleshooting steps to resolve Mail issues.
iOS: Troubleshooting Mail
http://support.apple.com/kb/ts3899
Thanks for using Apple Support Communities.
Regards,
-Norm G.

I am unable to Send E-mail via Default mail app in my iphone. IOS7, i have account of icloud, Gmail, Microsoft all the account are well added, i can recieve e-mails but the massage i send is never sent

I am unable to Send E-mail via Default mail app in my iphone. IOS7, i have account of icloud, Gmail, Microsoft all the account are well added, i can recieve e-mails but the massage i send is never sent

Turns out this was a simple set up error for me, although i'd set up mobile me to sync my e mails I had never set up my outgoing message server. Therefore, if I received a message from me.com I could reply no problem, however if the message came from aol.com I couldn't reply.

False repeating message "unable to send e-mail"

After I attempted to send a e-mail to an address with a bad extension, I logically got the message "unable to send e-mail. However the message will not go away. I can send e-mail, no problem. I have rebooted, Put in my mail settings over again, but to no avail. Even though my e-mail is working fine ...the message "unable to send e-mail" keeps popping up. Anyone know a solution?

I found the answer.
email is still in the outbox of the email app. Deleted it.

How to send e-mail notification automatically when a record is inserted?

Dear All,
Could anyone kindly tell me how to send e-mail notification automatically when a record is inserted through a form in Oracle Portal Release 2?
Regards,
Ridwan.

Hi,
If you are writing a form on a table then you can call the mail API from a database trigger on the table. If it is a form on a procedure, you can make the email call from the procedure. To know more about sending mails from plsql go to
http://www.quest-pipelines.com/newsletter-v2/smtp.htm
Thanks,
Sharmila

Better way of Sending E-Mail Notifications -- Workflow or Function Module ?

Hi All,
I have an implicit enhancement written in a t-code and based on some conditions I am creating event which inturn will trigger the workflow which inturn send e-mail notification via send mail step.
My question is:
Which one of the ways is better in terms of performance or overhead to send an e-mail notification. (There are no Approval processes in the workflow.. Just One Step E-mail Notification).
1) In the Implicit Enhancement, Trigger an event which inturn will trigger the workflow and e-mail is sent via send mail step.
2) In the Implicit Enhancement, Send the e-mail notification via standard function modules available... such as
"SO_OBJECT_SEND", "SO_DOCUMENT_SEND_API1".........
Would be grateful if someone can post the Advantages and Disadvantages in the above 2 ways of sending e-mail notifications..
Regards,
PR.

Just to throw in some additional factors, consider exception handling:
An event-based send mail step is decoupled and thus independent of your application. This means your exception handling is separate. It means you do not need to hold up the transaction if there is a failure. All this depends on how important the mail is. You could of course add validation code to ensure the mail address is valid and send it elsewhere if not.
Regarding performance, consider how often this happens. If it's an infrequent occurrence then I wouldn't worry about performance. Hundreds or thousands a day is a different story.
So the answer is:
Workflow for low-volume scenarios (low performance impact) that are important (better error handling in WF),
Direct mail for high volume and noncritical
In between these, use whatever you like
One more thing to perhaps consider the future. What are the chances of the mail being replaced by a work item in furture? Sometimes it's only by observing a process after go live that you can identify the best solution. e.g. you may decide to replace the mail with a "Please go fix this" work item because you need deadline monitoring

I am unable to send e-mails from my Outlook

Everything was working ok, for ages. Suddenly I am unable o send e-mails from my Outlook.
"The message I get is: 'Unable to send the message. Please verify the e-mail Address in your account properties'.
When I 'Send a Test Message' from Outlook, Tools, Accounts. All actions are completed besides sending a test message when I also get the instruction.

Hi
If it happened suddenly so possibly it was a virus?
I dont know why you are not able to send the e-mails.
I think you should check the email account properties. Check the data of you POP3 and SMTP server.
Im not a outlook expert but this options should be found somewhere in the email account properties.
The last possibility would be deleting of the email account under outlook and then a new creation of the new account.

I am unable to send the mail thru my GMAIL account.

i am unable to send the mail thru my GMAIL account
below error msg is diplyed
This message could not be sent. It will remain in your Outbox until it can be sent. This message could not be sent because your account does not have a prefer

Hey there meera singh,
I would suggest that you attempt the troubleshooting steps found in the following article to help you address this issue:
OS X Mail: Troubleshooting sending and receiving email messages
http://support.apple.com/kb/TS3276
Thanks for being a part of the Apple Support Communities!
Cheers,
Braden

Send e-mail notification if "Assigned to" field is empty

SCSM 2012 SP1.
I need to send e-mail notification to a distribution list if somebody creates an incident with empty "Assigned to" field. It could happen when an user sends new service request using self-service portal, incoming e-mail is processed,
or a support team member forget or cannot fill that field.
E-mail subscriptions do not work. I can create a rule with "User name is empty" condition, but it is never triggered.
I can use template with "Primary owner" and "Source" fields filled in advance to create SSP incidents. After that I can create workflow which sends notification to that person when an incident is created with "Portal"
specified as source. It works, but I can send notification to a single person only, not to a distribution list. What if that person is absent?.. In addition, I cannot use a workflow if "Assigned to" field is not filled during manual creation of the
incident.
Is it possible to send such notifications at all?

Check if this helps you
http://blogs.technet.com/b/babulalghule/archive/2013/05/05/how-to-configure-notification-to-notify-if-assigned-to-user-is-empty-or-incident-is-not-assigned.aspx
Thanks,
Babulal Ghule
http://blogs.technet.com/b/babulalghule

After installing the notified update I am unable to send e-mails (using O/E on XP) as my system is supposedly unsecure. (I receive a message saying "... Secure(SSL): No, Error Number: 0x800CCC0F".) Everything was working fine immediately before I updated.

After installing the notified update I am unable to send e-mails (using Outlook Express on Windows XP) as my system is now thought to be Unsecure. (I receive a message saying "... Secure(SSL): No, Error Number: 0x800CCC0F") Everything was working fine immediately before I installed the update. Can anyone (pleeeease) tell me where Flash has changed my security settings as I have looked at the setup, but everything looks okay. Thankyou!

Branching this to a new discussion as it appear you are facing difficulties with the installation or running the programs you have been downloading and installing.

Sending e-mail notifications.

Hi Experts,
When I perform any operation in ContentDB(like file upload or delete)...is there any provision in ContentDB that provides sending e-mail notifications to the users of that document/folder.
we have followed the below link..for creating the custom workflow that does some what similar job.
http://www.oracle.com/technology/products/contentdb/dev/viewlet/index.html
I wanted to know if there is any built-in feature available in content DB for doing this prorramatically...
Thanks
peter.

Hi Parker,
There is no in-built email notification - however, you could leverage a custom event handler in conjunction with the java mailer to achieve such a requirement (by monitoring and responding to certain events occurring in the repository).
See the CDB devkit for details on custom event handlers.
cheers
Matt.

Send Custom Mail Notifications to Author/Creator when workflow ends

Hello All,
I am working on workflows and I want to send a mail notification to the "Author/Creator" when the workflow finishes.
Currently, UCM workflows do not provide this functionality Out-Of-The-Box.
For this I implemented a filter and hooked it to the event +"advanceDocumentStateMarkWorkflowFinished"+ event.
Now I am able to send mail using the following code:
InternetFunctions.sendMailTo(email, "DynamicPrefixTemplate","Workflow Notifications", cxt);
However, I am not able to retrieve the author name to whom I have to send the notification. I found that "databinder" object (passed as param) in method signature below doesn't contain the author name attribute.
public int doFilter(Workspace ws, DataBinder binder, ExecutionContext cxt)
I can see other attributes such as dId, dName etc. but not the "dAuthor". Can someone please suggest how can I retrieve the author name for the document for which workflow has just finished and notify the author..
I know there are services like getDocumentByName, but I do not know can I call these services from my filter code in Java. Please guide me.
Thanks in Advance,
Aakash

Hi,
If what you need is to send a notification to the original author, you do not need to write custom code, you can follow these steps:
1) on the first step, assign the dDocAuthor to a workflow variable. As an example, on the Entry event if the first step add this code:
<$wfSet("originalAuthor",dDocAuthor)$>
Note that you need the previous step only if you allow revisions during your workflow. If you don't, then dDocAuthor would not change and you can skip that step
2) on the last step, send a notification using the variable we saved on the first step as the addresee. As an example, on the on Exit event add this code:
<$wfNotify(originalAuthor,"user")$>
(if you do not allow revisions, substitute originalAuthor by dDocAuthor)
Another thing, a lot of people run into the need to override the standard email templates when they start sending custom notifications. The workflow administration guide has a very nice and detailed section that explains how to do this. Also, the idocscript reference guide is always a good point to check the correct syntax for idocscript functions. There is a section of workflow related functions/variables in that guide that always comes in handy.
Hope this helps.
Regards,
Jorge

HT4865 How do I stop the system from sending e-mail notification every time i update icloud?

How do I stop the system from sending e-mail notification every time i update icloud?

Pages. Every time I add new information to the program I get an e-mail asking me if I was the one logging on. It is an annoyance.

Unable to send E-mail notification. [10054]

Similar Messages

Maybe you are looking for