Unable to synchronize the time with chrony (probably..)

Hi all,
i've switched to systemd and set up chrony (with networkmanager-dispatcher-chrony) to correctly set the time.
Still, if i run timedatectl status i get
Local time: Sun, 2012-10-28 20:09:14 CET
Universal time: Sun, 2012-10-28 19:09:14 UTC
Timezone: Europe/Rome
NTP enabled: yes
NTP synchronized: no
RTC in local TZ: no
From what i read, it seems that chrony actually syncs to the server, but than it doesn't set the time correctly. Is it right? And if so, why?

I was having the same issue with Chrony, which is why I did some research (and found a possible fix) which could be of use to you. Please see this topic, specifically issue 3, for more information.
Last edited by ackalker (2012-12-10 23:19:14)

Similar Messages

How to synchronize the time in NI 1776 smart camera

Hi,
i'm using 2 NI 1776 Smart camera together, how can i synchronize the time with host pc?
i had follow this thread to setup the NTP at host PC
http://digital.ni.com/public.nsf/allkb/FFC39254D02C652A86257A620074FB49
and then follow another thread to setup the NI-TimeSync 1.2
http://digital.ni.com/public.nsf/allkb/402F0F07F851768486257A1B0063EE88
but i encouter some error when installing NI-TimeSync at Smart Camera (refer to s3.png)
i'm using window 7 with LabView 2011 SP1 and VBAI 2011 SP1
anyone know how to solve this problem?
Attachments:
s1.png ‏122 KB
s2.png ‏107 KB
s3.png ‏25 KB

VBAI 2011 is based on LabVIEW 2010.
So you will either have to use LabVIEW 2010 + LabVIEW Realtime 2010 in combination with VBAI 2011 SP1,
or you use LabVIEW 2011 + LabVIEW Realtime 2011 in combination with VBAI 2012.
And here is a KB which explains how to synchronize 177x SmartCams to a timeserver.
Christian

Failed to authenticate & Unable to synchronize login time

Hi,
My OSX clients are bound to OSX Server.
Most clients are 10.8, some are 10.9.
Server is 10.10, recently migrated from 10.6.8.
Most clients can log in to the user accounts in good order.
However I have a couple of clients that cannot log in (they both happen to be 10.9 clients).
The login box just shakes when credentials for any network user are enetered.
When this happens the systme.log on client shows:
Oct 30 09:33:24 imac1252 SecurityAgent[166]: User info context values set for userxyz
Oct 30 09:33:25 imac1252 authorizationhost[182]: Failed to authenticate user <xyz> (error: 9).
The system.log on 10.10 server shows:
DSUpdateLoginStatus: Unable to synchronize login time for userxyz: 77009
I have checked the time and time zones on server and client and they are identical.
Does anyone have any guidance, please?
Thanks,
b.

I spent some hours with Apple Support on this.
Apple Support logged into my server, had me do some testing from different clients with them watching, detroyed & rebuilt OD database, tested with a brand new fresh OD database, uploaded some files for analysis, etc.
The problem is...
Looking back 8 years or so, my mobile user accunts were created on server 10.6 (or maybe even 10.4 can't remember that far back )
OSX server (back then) did not require or even have have a certiftcate for these accounts.
Jumping forward to today...
Server 4 on 10.10 requires a certificate for 10.9 clients (and above). But my my OD database (created years ago) does not have a certificate for the accounts to use, and they would not know anything about it even if I created one.
So, support tell me the only option to get things working again is to destroy and rebuild the OD database. I can keep Users, Groups etc, by exporting, but I will need to recreate all passwords.
I will do that in due course.
In the meantime my workaround is to have 10.9 users disconnect from network at the time they enter their login password. They can reconnect as soon as they hit 'return'.
b.

How do you print with StdOut.println once at a time with equal probability!

Hello everyone!
I tried finding this in the FAQ, but nothing really came close to my unique situation. I am trying to write a method before the main method to report to the user that their guess is too high, in a game where the computer picks a number from 0 to 1000.
I have four different statements to let the user know that the guess is too high, here is the code:
public static void reportTooHigh() {
StdOut.println("Wow come on.. too high!");
StdOut.println("Too high buster.");
StdOut.println("Too high, LOL.");
StdOut.println("WOOWWAAAWEEWAAHH.. too high!"); When I use this method in my main method by typing ProgramName.reportTooHigh(), it prints out all of the statements. Any suggestions on how to get them to print out one at a time with equal probability?
Thanks!
Edited by: OvechkinRulez on Apr 27, 2008 4:06 PM
Edited by: OvechkinRulez on Apr 27, 2008 4:06 PM
Edited by: OvechkinRulez on Apr 27, 2008 4:07 PM

OvechkinRulez wrote:
Flounder, I tried using an if statement but for some reason it didn't work for me. It still printed out all of the statements. Can you give me a head start, I am sure I can figure out the rest. Do you pick a value from 0 to 1, and then if its below .25 you print out one thing, below .5 but above .25 you print out the other, etc.?If you use the Random class you can get a number from 0 inclusive to 4 exclusive (ie 0,1,2 or 3). If 0 print the first message, if 1 print the second message, etc. Or as pointed out already use the switch statement.

Hello! I have a huge question about how can I get connected my iphone 4 with my car Is there any opption on find my car application? I have a Volvo xc60 and I want to be connected all the time with my iphone. Can I do that?

Hello! I have a huge question about how can I get connected my iphone 4 with my car Is there any opption on find my car application? I have a Volvo xc60 and I want to be connected all the time with my iphone. Can I do that?

Hello. I can say that you have a quite strange „huge question”… It’s non-sense to stay connected with your car which is hundreds miles away. Unless…
I have a theory. You don’t want to controll your car, you want to controll somebody who is driving the car. Volvo XC 60 is a nice family car, usually used by married men between age of 35-45, probably with small children, so it’s very unlikely that you want to controll your teanage kid, mainly because probably even if you would give him/her to drive the car in the neighborhoud, I don’t think that he/she would be „several hundred miles away”… If your child is not young teneage anymore, and he/she has his/her own life, but you want to control him/her, that is sick… So I am convinced that you want to controll your husband who probably travelling often! Am I wright?
Isnt’t nice at all! Would you like if you would be monitorized in such way? I bet you don’t!
Anyway, iPhone is smart, you can use for many things, but come on, you really were thinking that there is such kind of application???
What could you do it's to put in the car a GPS survelling system, however I don't think that you could do it without your husband knowledge, otherwise he won't be able to start the engine...

Having problems with ipad mini and Siri. Works sporadically, will work once and then the second time not. Worked all the time with the original Mailbox app. Then started doing the same thing when I installed the new update so wondering if it is software?

Having problems with ipad mini and Siri. Works sporadically, will work once and then the second time not. Worked all the time with the original Mailbox app. Then started doing the same thing when I installed the new update so wondering if it is software?

Hi,
I have the check box on a second Partition but not on the Time Machine one
I forget what I did now to get this called "Recovery HD"
For the rest try https://discussions.apple.com/docs/DOC-4055 User Tip that links to Pondini's work on Time Machine.
10:17 pm Friday; May 2, 2014
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

HT1222 Last time I did an update...I lost most of my music...thousands of songs and had to reinstall them!!!! I am scared as **** to do another update!! I have radio shows to do and can't afford to spend the time with this. Help anyone?

Last time I did an update...I lost most of my music...thousands of songs and had to reinstall them!!!! I am scared as **** to do another update!! I have radio shows to do and can't afford to spend the time with this. Help anyone?

A bit late for this advice now, but hopefully you'll know what to do next time.
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2

Unable to access the objects with out schema as prefix.. can any body help

Hi,
i am using 10g.I have one problem like i unable to get the table access with out mention prefix for that table.
but i created public synonym and gave all grants to all users also. but still i need to mention schema name as prefix otherwise it give the error..
can any body tell me reason and give me solution.
ex: owner:eiis table:eiis_wipstock
connect to: egps schema
in this position if i try with eiis.wipstock it gives error but if i mention like eiis.wiis_wipstock then its working fine.

Pl do not spam the forums with duplicate posts - Unable to access the objects with out schema as prefix.. can any body help

SWP works half the time with Vista 64, plus two installs

Hey all,
I understand now that SWP only works fully with vista 32 but I do have it working most of the time with vista 64.(only crashed once) My questions are
1) For some reason on my uninstall folder it shows SWP twice.
2) When I tried to uninstall one of them its said I was uninstalling part of windows, so I canceled it.
3) Since its just for vista 32, will running it on vista 64 cause my computers security to be lower than normaL? I mean can a hacker take advantage of the fact that I'm running SWP on vista 64 even though its only made for vista 32.
Thanks
Marc
Message Edited by marchatzi on 10-12-2009 07:35 PM

Hi Katrina, I am back again.
Got my Vista-64Bit PC 2 days back. It has been a long 2 days. Today I am trying to get iTunes and my iPod setup, but I am not sure where to go from here.
I did download iTunes-for Vista 64Bit and installed. Right away it updated to 8.1. No problems. I then copied my entire collection of songs (the same ones from my OLD PC, and managed by iTunes) from the external drive to the NEW C: Drive and to the exactly same named folder.
Now I don't know how to proceed.
In the NEW Vista environment, I don't find the same folder structure that was in the old XP PC. The new Vista PC has the following four places with any reference to iTunes and iPOD.
1. Muisc/iTunes - has 4 files (iTunes Library. iTunes Library Extras, iTunes Library Genius, iTunes Music Library) and i folder (iTunes Music)
2. C/PKM/iTUnes/iTUnes Music -- this is my creation, and this is where I have all muisc files/tracks etc, was and to be managed by iTunes from this location.
3. C:/Program Files (X86)/ Apple Software - has 4 files and 3 folders
4. C:/Program Files (X86)/ iTunes -- has 4 folders and 9 files.
5. C:/Program Files (X86)/ iPod -- has 1 folder (bin) and 1 file.
I do NOT see any files with *.itl type extensions.
I had also exported my Playlists (the file name was music.xml)
Katrina, where do I go from here? -- need to be able to use the librayr from my old PC, all Ratings from my OLD PC, and my playlists form Old PC, and of course the total libary from the old PC.
I do have the complete file structures for the OLD PC where iTunes and Apple had saved files and folders - there were three places in addition to my own creation of the location where I ahd saved all the music files. Please let me know if you would like to see the folder structures.
Thanks.

Unable to create the type with the name 'MSORA'. (Microsoft.SqlServer.ManagedDTS)

I am attempting to use the Integration Services Import Project Wizard within Microsoft Visual Studio and am getting this error
Unable to create the type with the name 'MSORA'. (Microsoft.SqlServer.ManagedDTS)
upon Import.
Can anyone shed some light for me on this cryptique error message?
Thanks for your review and am hopeful for a reply.

If you have the SSIS and SSDT (BIDS) installed then
I believe the DTS assemblies got derigistered, a typical outcome of corrupted software, so a full re-install would be the best option. VS +SQL Server + more
Otherwise, as a quick fix try to
reference the SSIS assemblies, like Microsoft.SQLServer.ManagedDTS.dll + more.
They are by default in C:\Program Files\Microsoft SQL Server\<number>\SDK\Assemblies.
Arthur
MyBlog
Twitter

Unable to create the type with the name 'ODATA'

On a test server with VS 2012 and SQL 2012 installed, I have created an SSIS project in project deployment mode. In the packages of the project I use the Odata source for SSIS. The packages run fine in VS 2012. But when I deploy the package to the Integration
Services catalog on the same server as where I am running VS 2012 I get a deployment error:
‘Failed to deploy project. For more information, query the operation_messages view for the operation identifier '25084'. (Microsoft SQL Server, Error: 27203)'
When I read this message from the SSISDB database, I see the problem with ODATA.
use SSISDB
go
select * from catalog.operation_messages where operation_id = 25084
--Failed to deploy the project. Fix the problems and try again later.:Unable to create the type with the name 'ODATA'.
As I said: the packages with the Odata run without error when tested from within VS2012 on the SAME server. When I deploy the project from Visual Studio I get the error.
For completeness: I have also tried deployment from VS2012 to another server where the SSIS Odata source has bene deployed. Also to no avail.
Jan D'Hondt - SQL server BI development

The next possiblity for me was to convert the project to Package deployment and see what the result I get. I have converted my project with package connections from project deployment to Package deployment. Then I deployed the package on the server in MSDB
catalog from SSIS. I.e. I connect with SSMS to Integration Services as an administrator and under the MSDB folder I added a new folder for my package. I then imported the dtsx into the mdsb package store. The Import worked. Still from within SSMS and connected
to the Integration Services, i right-clicked on the package in the MSDB store and selected 'Run package'. In the Execute Package dialog window, I clicked on 'Execute' and the package actually ran. The Odata connector was opened, it read the data and imported
into my database.
This experience made me realize what the real culprit was: The OData connector is a 32-bit connector in SQL Server 2012.
To prove this: with SSMS I connected to the SQL database server and in the Integration services catalog, i right-clicked on the package that was deployed in Project deployment mode, then selected 'Execute...'. In the execute dialog windo in the 'Advanced'
tab I checked 32-bit runtime. And the package ran.
To wrap it all up:
The Project deployment will work, but not with the Odata source as project connection. The Odata connection must be defined in each package as a package connection.
Run the deployed packages in 32-bit mode on the server
Jan D'Hondt - SQL server BI development

Reboot the iphone to install a program and has been left all the time with the apple on the screen

reboot the iphone to install a program and has been left all the time with the apple on the screen.
takes so hours without turning away. I can do?

Reset your phone , you wont lose anything. Hold the home and off button down until the apple symbol comes up.

I have a Time Capsule on which I back up 2 MacBooks and on my wife's machine she keeps having Airport Utility popping up all the time with a yellow button flashing on the left and a Red button on the right side with a "1" in the middle of it.

I have a Time Capsule on which I back up 2 MacBooks and on my wife's machine she keeps having Airport Utility popping up all the time with a yellow button flashing on the left and a Red button on the right side with a "1" in the middle of it. Can any one tell me what is wrong. I read where when the yellow light was flashing there was a problem, but I am a novice at this and have no idea where to turn. It seems to be backing up on a regular basis.

On the Mac......
Open up Macintosh HD > Applicatons > Utilities > AirPort Utility
Click on the Time Capsule icon, then click Edit in the small window that appears
Click the Network tab at the top of the next window
Change the setting for Router Mode from the current DHCP and NAT to read Off (Bridge Mode), then click Update at the lower right of the window, and wait a full minute for the Time Capsule to restart to a green light.
Then.....very important
Power off the Time Capsule and your Arris modem/router for a few minutes
Start up the Arris first, and let it run a few minutes by itself
Start up the Time Capsule next the same way
Your network will now be correct, and your printing capabilities will improve.
If Time Machine backups do not occur now, post back and we will tackle that next.

On XP Machine dedicated to Lookout 6.5. The Hypertrends are not moving at proper pace according to the scale at the bottom of the trend graph. After 60 seconds it is 40 seconds behind, so the trace makes up the time with a straight line an repeats.

On XP Machine dedicated to Lookout 6.5. The Hypertrends are not moving at proper pace according to the scale at the bottom of the trend graph. After 60 seconds it is 40 seconds behind, so the trace makes up the time with a straight line and then repeats. Even without any traces on the graph, it does the same thing.
I've uninstalled and reinstalled the 6.5 software. Nothing else runs on this machine. It is dedicated to Lookout. I've installed a gauge object, with the same datapoint that the hypertrend is trying to graph, that updates very rapidly with no problem, so doesn't appear to be a network problem.
I'm only tracking one datapoint, at this time, until this issue is solved. Help please?

Here is the screen shot.
Definitions for this post:
- "streaming data" = Data coming in over ethernet from datapoint that is being polled.
- "1 scale-second" = 1 second of time based on the scale on the bottom of the graph
Remember that data continues to trace. However, according to the scale at the bottom of the graph, the graph traces 60 seconds of streaming data in @10 scale-seconds, then displays .01 second of streaming data over 50 scale-seconds. The .01 second of data is the long straight lines that you see between the rapid data traces that appear to be 50 scale-seconds.
Even without any datapoints being traced, the graph clicks forward 1 scale-second every 6 real-time seconds. It does this for @10 seconds then clicks forward @50 scale seconds, instantly. Then repeats, as you can see in the graph.
The gauge that is on the same control panel, that you see in the screen shot, is tracking the same data point as the graph. It is polling the data point at real time and never stops updating, so I know that the network is streaming just fine.
513.850.9509 - if I can help clear things up.
Attachments:
LookoutFunkyGraph.jpg ‏347 KB

How to synchronize the time from an internal ip adress (MS ISA Server)

How I can synchronize the time of eMac client from an internal Time Server (Microsoft ISA Server).
I have setting the DHCP time parameter but it does not work in the e Mac but only in Windows clients (2000 and XP).
My Firewall does not allow the eMac client to synchronize from the external time server.
Sorry for my english.
Best regards,
Stefano

Yes but selection allow to select only Apple Time Server: in my case Apple Europe (time.euro.apple.com).
The possibility does't exist to set up an other server outside of those proposals.
If you know like modifying the values proposals and adding a fixed IP for example, it makes to know me.
Sorry for my english and Thank you for your post
Stefano

Unable to synchronize the time with chrony (probably..)

Similar Messages

Maybe you are looking for