Unable to transfer windows 7 files due to DLL error message

I recently went from PC to Macbook Pro and have been unable to transfer files from my windows 7 due to an error message "missing DLL File" Does anyone have a sloution to this problem or a sucessfull alternitive transfer method?

You can't transfer the Windows OS nor installed programs. You can transfer your data using an external drive, DVDs, usb flash drive or network.

Similar Messages

HT3209 Unable to transfer rented movie to I pad, error message indicates already transferred to device, but it is not

I cannot stand that assistance is not readily available, I rented 2 movies that will not transfer from my coomputer to my I pad, error message said they were already transferred to another device, this is not true???

rented through iTunes on my computer. Called apple 7 hours ago and they said they are have issues with itunes and people connecting. I still cannot connect. My computer says I must be connected to the internet to download a movie. I have internet connection. Just cannot connect to itunes.

I am unable to install photoshop elements13 due to an error. it shows no error code but does say - This installer does not support installation on a 64-Bit Windows operating system. Please download the 64-Bit version of Photoshop Elements.

i am unable to install photoshop elements13 due to an error. it shows no error code but does say - This installer does not support installation on a 64-Bit Windows operating system. Please download the 64-Bit version of Photoshop Elements.

download the 64bit installer,
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.7| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

When i drag and drop an image on my site. it gives the following error. "Unable to access local files due to browser security settings. To overcome this, follo"

I am using the firefox version 17 and when i drag and drop an image on my website. It gives me the following error.
Unable to access local files due to browser security settings. To overcome this, follow these steps: (1) Enter "about:config" in the URL field; (2) Right click and select New->Boolean; (3) Enter "signed.applets.codebase_principal_support" (without the quotes) as a new preference name; (4) Click OK and try loading the file again. Or go to the homepage for a link to the tutorial on how to do it.
I have completed the above steps and it is still showing the same error message. Any help would be highly appreciated.
Thanks.

Thanks kumars ,
I have a specific drag and drop area on our website. This works fine for all earlier releases of Firefox after these security settings
"(1) Enter "about:config" in the URL field; (2) Right click and select New->Boolean; (3) Enter "signed.applets.codebase_principal_support" (without the quotes) as a new preference name; (4) Click OK and try loading the file again."
Bust these settings not work for me in Firefox 17.
Yes the drag and drop functionality is java script based and i am not using any script blocker addons.

When trying to import music files I get a error message that says "importer reported a generic error" I'm using windows 7, DellPC, installed premiere elements 13 2 days ago. Also when previewing and editing video,screen looks great but when I transfer to

When trying to import music files I get an error message Thea says "importer reported a generic error". Also when editing video, screen views look great but when I transfer to PC or flash drive video quality is very poor. Any suggestions?

chansen232
Premiere Elements 13 on Windows 7 (presumed 64 bit).....
1. Music files and error message...are these music files from iTunes? If so, convert them to .wav in iTunes to convert them to wav version, and then import the .wav version into Premiere Elements 13 project using Premiere Elements 13 Expert workspace's Add Media/Files and Folders/Project Assets from where you drag the wav version to the Soundtrack.
The following are the instructions for the iTunes converting
http://support.apple.com/en-us/HT1550
If any problems with the instructions, please let me know, and I will go through them with you.
2. How you set up the project and the export settings that you select greatly influence your end product result.
a. What are the properties of the source media?
b. What project preset did you (manually) or the project (automatically) set to match the properties of the source media.
(If you do not know, please tell us what you see for the readings of Editing Mode, Timebase, Frame Size, Pixel Aspect Ratio - even
if the fields look grayed out.)
c. For your export...Publish+Share/Computer/and then what? And what preset? Did you use the default settings of the preset or did you
customize the export settings of the preset under the preset's Advanced Button/Video Tab and Audio Tab?
Let us start here and then decide what next.
Thanks.
ATR

Unable to load ITUNES onto PC HP, windows 7 Home Version. Error message reads "Application Application Support not found". "Unistall and reload". I have done that 4 times on Explorer and Firefox without success. Help??

Unable to load ITUNES onto PC HP, windows 7 Home Version. Error message reads "Application Application Support not found". "Uninstall and reload". I have done that 4 times on Explorer and Firefox without success. Help??

I had gotten a similar problem, except with "provider services", i believe, but i solved it by copying sqlite3.dll from E:\Program Files\Common Files\Apple\Apple Application Support to E:\Program Files\Common Files\Apple\Mobile Device Support. doing that solved my first problem, but now i have been getting the error described in this topic (unable to load dataclass info... etc.). i tried reinstalling itunes (i already had 9.1.1, and thats what i reinstalled) by using the method described on apples site (using the "remove programs" tool in the control panel) and then downloading and installing itunes. when i opened it again, i still got the same error, and just now i got an error saying "the instruction at "0x00aadb6b" referenced memory at "0x00000008". the memory could not be read" it gave me the option to cancel and debug, or to press ok and terminate the program. I tried pressing cancel, and the popup went away but nothing else happened. a minute later the popup was back, so i pressed ok and itunes quit. Upon opening Itunes again, i got the very same error. sorry for the long post, but its really been bugging me. thanks for any help you might give, and if you need anymore info, feel free to contact me.

Unable to open windows using boot camp. Get message "The bless tool was unable to set the current boot disk." Any thoughts, Thank you.

Unable to open windows using boot camp. Get message "The bless tool was unable to set the current boot disk." I am using an Imac , Lion operating system, and Windows 7. It worked a few days ago. Any thoughts, Thank you.

Note that nowhere in the Boot Camp instructions does it tell you to use Disk Utility to format the Windows partition. The Boot Camp Assistant program creates the partition & sets the +partition scheme info+ of the disk as appropriate for the Windows installer but the Windows installer itself is responsible for formatting the new partition with the appropriate +file system scheme+ (NTFS for Windows 7).
If you follow the instructions in the Boot Camp Installation & Setup Guide to the letter you should have no problems installing Windows.

HT1923 When attempting a reinstall of iTunes, I cant delete the file C\Program Files\Common Files\Apple\Internet Services\Shellstream.resources due to same error message as described above for iPod file; however i can't find it anywhere in the Task Manage

When attempting a reinstall of iTunes, I cant delete the file C\Program Files\Common Files\Apple\Internet Services\Shellstream.resources due to same error message as described above for iPod file; however i can't find it anywhere in the Task Manager

That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

AD4J: Unable to start Heap Dump due to OS Error

When Java 'Heap Dump' is requested, the following message is shown:
Unable to start Heap Dump due to OS Error.
Details of the monitored JDK and application server are given below:
JDK: Sun JDK 1.4.2_08 on Solaris 9
Application Server: WebLogic 8.1 SP4
1. What could be the possible cause? No errors are logged in jamserv/logs/error_log. Is there any way to enable detailed logging?
2. Each time the heap dump is requested, a file of the format heapdump<n> gets created in /tmp (e.g. /tmp/heapdump12.txt). If you see the file, it contains the following:
a) a line containing summary of the heap usage, and
b) stack traces of all the threads
Thanks!

Wrong Forum?

"unable to load wingenerator.dll" error message in Captivate 4

Has anyone run into the "unable to load wingenerator.dll" error message in Captivate 4. I didn't see this type of error in v3...so just wondering if it is an issue with this version. I have to save my project after every change in order to not loose my work. I get this error and then the program crashes without saving my work.

Hello Cat,
Welcome to our community. This sounds like the Windows registry has either become corrupt or has an incorrect permission. If you are using Windows XP then you might want to take a look at the following blog post
Adobe Captivate 4 Installation Issues on Microsoft XP
If you are using Windows Vista then I would suggest that you contact Adobe using the Adobe Captivate Feature Request/Bug Report Form
Adobe Captivate Feature Request/Bug Report Form
Regards - Mark

C:\Windows\ehome\ehuihlp.dll Run DLL error message

When I start my laptop (HP Pavilion dv6-3120us Entertainment Notebook; 64-bit operating system; AMD Turion II P540 dual-core processor, 2.40 GHz) , the following Run DLL error message appears: "There was a problem starting C:\Windows\ehome\ehuihlp.dll.
The specified module could not be found." I wonder if this is related to my uninstalling (or attempting to uninstall) Windows Media Center, because it would take such a long time to open, and I didn't know how to disable it from automatically starting.
Do I need to reinstall the file? I don't think I have any original software separate from what came with the laptop. I do have a Recovery Disc Set from Feb. 2011. Is there another way I can download the file and/or fix this?
Thanks.
SL

Thanks very much for the reply. I did uninstall the software by using the Add/Remove Programs from the Control Panel. I went in and unchecked the box for Windows Media Center and when I rebooted, the message didn't come up again.
I also started getting another similar DLL error message, but it was under our Users folder: AppData\Roaming\newnext.me\nengine.dll. I unchecked it ("Next Live") the same way as for the Windows Media Center and when I rebooted, it didn't come up. I didn't
uninstall or do anything else, so do I need to do so? (I don't know what "Next Live" is.)
Thank you,
SL
SL-7

On starting windows xp I get an error message. applesyncnotifier.exe unable to locate component

On starting windows xp I get an error message. "applesyncnotifier.exe unable to locate component". I have uninstalled and reinstalled ITunes. Are there any recommendations?

Dunno. I just got it too. And after reading all the info, I tried what they did..
I copied the file from one folder to another one, and then I got a DIFFERENT error.
All I know is the last time I ran an upgrade to apple products, I lost my entire library, AND my I pod.
So I have been avoiding updates.. I finally try one and again, the silly thing acts up.
If this is the quality of Apple software then Im going to stop updating at all.

My windows pc is showing an error message "The file iturnes library itl cannot be read"

My windows pc is showing an error message "The file iturnes library itl cannot be read because it was created by a newer version of itunes". I have not downgraded my itunes or done anything with it other than follow standard download instructions .I have an ipad one and iphone 3g, neither work now help?

The file "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes".
Try the following user tip:
Empty/corrupt iTunes library after upgrade/crash

HT201413 I am having a problem updating itunes to the latest version on my windows xp i get the error message 126 and the sign that says this application has failed because MSVCR80.dll was not found.

I am having a problem updating itunes to the latest version on my windows xp i get the error message 126 and the banner that says this application has failed because MSVCR80.dll was not found. anyone have a fix suggestion? thanks

Click here and follow the instructions.
(98724)

Unable to install windows 7 home premium updates error code 643 (KB 954430, KB973688 & KB2538243)

Unable to install windows 7 home premium updates error code 643 (KB 954430, KB973688 & KB2538243) - Please help me!!
I'm running Windows 7 Home Premium 64-bit on a Lenovo ThinkPad E530. This laptop is only brands new.
KB954430, KB973688 & KB2538243 - These three updates keep giving me problems. In Windows Update, under "view update history" these keep showing up as failed. I also get the error, "Code 643".
At the end of the installation it tells me three updates are failed to be installed and when I shut down to try to update, Windows always configures up to ~15%, then fails, and reverts changes, then prompts me to install updates the next time I turn my computer on. Each time, I have to re-install every update that I had installed prior to shutting down.
I went through Trouble shooter - "Fix it" numerous times, Repaired Net framework profile and also followed few instructions I found from the net such as running "Reset Register Windows update Components" but nothing works so far.
I even tried manually installing KB954430 but it told me "An error occurred during the installation of assembly component. 7B30B69B-OE6C-B7EO-A06B-D6B9ABF34537 HR RESULT: 0 x 80070BC9" and the installation bar seems to stop at "Publishing Product information", then rolls back the installation.
If you need more details, please tell me & Thanks in advance

Checkout this Microsoft article: http://support.microsoft.com/kb/976982
It has some resolution steps that may help.
Thank you for being a part of the Lenovo Family,
Catie
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Donate KUDOS and Click "Accepted Solution"

Unable to transfer windows 7 files due to DLL error message

Similar Messages

Maybe you are looking for