Unable to update item master data after upgrade

Greetings,
I have just upgraded from 2005A SP01 PL22 to 8.81 PL05.
After the upgrade, I am unable to update any field in the item master data.
Error message:
In "Warehouses - Setup" window, on "Accounting" tab, choose sales-type revenue account , '_SYS00000001165' [Message 131-52]
I have checked all the warehouses accounting tab and all the revenue account is a sales type account. I have also checked the GL for _SYS00000001165 and it is a COGS GL. After I change its type to "Sales", I am able to update. This shouldn't be the case.
I have also tested creating and update new item master and I have no problem. However, I will have the same problem if i add a new item via duplicating from an old item.
Any advice?
Thank you.

Hi,
Can you also check whether the Item which you are trying to update has Manage G\L Account by as Item, Item group or Warehouse?
If you have checked for the Warehouses, check for the Item Group and at the G\L Determination > Inventory tab as well.
Kind Regards,
Jitin
SAP Business One Forum Team

Similar Messages

Updating customer master data after invocing

Hello Gurus,
Is there any procedure that after the customer is INVOICED or after the completion of billing the customer master data field needs to be updated.
Thanks in advance
sameer

hai gurus,
For the above question, is it possible to create a extra feild in customer sales tab.
sothat whenever the invoice is saved for bill to party,(the extra feild is for either sold tp party or bill tp party) that feild to going to update automatically.
Is it possible to get trasaction data to be displayed in customer master data, like the one in material master data, where stock valuation is going to update in accounting 1 veiw.
thanx in advance
sukumar

Unable to update apps on 4s after upgrading to iOS 8.1

Hi,
I am unable to update apps on 4s app store after upgrading to iOS 8.1. signed in on app store & icloud still app upgrading will show circle running but wouldn't start upgrading. location service OFF, tried after changing to location service ON but still won't upgrade. what should be the issue? any correct way to update apps. I have been using for long, never had issue with app store on previous iOS migrations. anyone here can help please.

Hi there Sam R 12,
You may want to try force closing all open apps and resetting the device as an initial troubleshooting step. Take a look at the articles below for more information.
iOS: Force an app to close
Turn your iOS device off and on (restart) and reset
-Griff W.

Updating satellite system data after Upgrade in Solman

Hi All,
We are using solman 7.01 connected to BI 7.0 system as it's satellite system, We have recently Upgrade our BI system to BI 7.01 version but we do not see its updated version in solman system.
We checked in SMSY it is still showing BI 7.0, we have also done option " Read data from system " but it did not work.
Please suggest to Update my system data in solman.
Regards,
Shivam Mittal

Hi Shivam Mittal
When you clicked in "Read system Data Remote", were the information returned with success in the logs ?
Usually the informations aren't pushed because the READ Rfc's are failing.
If you run job LANDSCAPE FETCH, the information are being collected correctly ?

Insert or Update Item Master is too slow

Dear Expert,
I have a problem in add or update Item Master Data. When I click Add/Update, the process saving is too slow (need more than 5 minutes). This condition appear yesterday. In 2 days ago process add/update item master data normal.
But the others transaction like business process, transaction is normal.
I have did shrink database in SQL, but not help.
Does anybody help my problem? how should I do?
Thank you before help me

Hi pak Hendra,
May I know how much is your livedb size now ? If it is still slow after reindexing, you may consider to do these followings suggestions:
1. Increase your server hdd size
2. Increase your server's processor
3. cut off and do new opening balance
Is the problem happened in branch/outlet ? do you use citrix to access the server from branch ? Of course you can reindex the db to solve this issue but it is not the only one solution. You must also concern about the connection.
Rgds,
JimM@sbo_knowledge_village

Item descriptions update on Master Data

Hi there,
Item descriptions update on master data does not get read into existing sales orders and subsequently when delivery dockets and invoice are generated, they are all not updated. Could the SAP programmer analysts please fix this bug? thanks.
Similarly if item's GL account is set by item group and the item group is changed after an item is processed on sales order, the change in GL posting is not reflected when invoice is subsequently processed. Please also fix this bug, thanks.

Hi Amy,
for both issue nothing to do from SAP MDM side, You need to take help of SAP Technical Consultant(Programmer) which analyst the problem and fix it for e.g. SAP Notes updation for program or assign/change SAP standard program for message type etc.
Thanks,
Jignesh Patel

Update of Intrastat details against Item Master Data

Hi I'm looking to import Intrastat details against item master data. I understnad from the portal that this needs to be imported to UDO but need some guidance in terms of template set up.
Grateful for any help
Regards
David

Hi,
If you have made already the transactions you cannot update the G/L method.
Secondly if you have set G/L by Item level then you need to define the inventory accounts for all the items in your template then only you will be able to proceed further
Regards
Md.nazeer Shaikh

While Updating Item master 1250000088 - Date ranges overlap; change the active or inactive date range

hi.
i am updating item master.
just i am trying to update to inactive from active
i allready given the date ranges
but above error is comming..
        Dim vItem As SAPbobsCOM.Items
                    Dim RetVal As Long
                    Dim ErrCode As Long
                    Dim ErrMsg As String
                    vItem = ocompany.GetBusinessObject(BoObjectTypes.oItems)
                    'Retrieve a record by its key from the database
                    RetVal = vItem.GetByKey(Icode)
                    '' vItem.UserFields.Fields.Item("U_Status").Value = "Sold"
                    vItem.Frozen = BoYesNoEnum.tYES
                    vItem.FrozenFrom = "09/02/2014"
                    vItem.FrozenTo = "09/02/2014"

hi.
Thanks for your reply..
overlapping ..means
     'Retrieve a record by its key from the database
                    RetVal = vItem.GetByKey(Icode)
                    '' vItem.UserFields.Fields.Item("U_Status").Value = "Sold"
                    vItem.Frozen = BoYesNoEnum.tYES
                    vItem.FrozenFrom = "09/02/2014"
                    vItem.FrozenTo = "09/02/2014"
    vItem.FrozenFrom = "09/02/2014"
      vItem.FrozenTo = "10/02/2014"
i all ready tried above two ways.. given date same and given two diff dates....
but the same Error is comming..
Any info.plz update me..

Using DTW to update the Item Master Data attachment tab

Hi Experts,
Has anyone tried using DTW to update the Attachments Tab on the Item Master Data please? I tried a few things (similar to importing an attachment to an activity) and couldn't get it to work.
I couldn't see that anything to do with the Attachments Tab was exposed in DTW when looking at the mapping fields and also when looking through the options available in the Items Object under Customize Templates - but then I might not be seeing it correctly!
Any ideas or solutions would be great.
Many thanks,
Caroline

Hi Caroline,
AtcEntry is correct for the document, this relates to the AbsEntry in OATC, which then in turn links to AbsEntry in ATC1.
There are a few fields that need to be populated in ATC1:
AbsEntry
Line - To be used if more than 1 Attachment
SrcPath - for the file path
Filename - for the file name
FileExt - for file type - i.e. .pdf
You may be able to configure DTW to import these as a manually created DTW but I suspect that OATC and ATC1 are not open to the Di which will stop it. Coincidently I have been looking at Task Centre to update these but have encountered the same problem
Regards
Sean Martin

Item Master Data Update using DTW

hello all,
i want to update my Item Master Data using DTW, and i am experiencing a problem, when i use a comma delimeted ex. this line
BEARING, BALL, # 307, DTW will put it in a different field, while if i will use a text tab delimeted on the same line the result will be "BEARING, BALL, # 307" and i cant acheive what i want. this is the exact description i want
Original Data                       :BEARING, BALL # 307
Using Comma Delimeted          :BEARING next field(BALL # 307)
Using Tab Delimeted          :"BEARING, BALL, # 307"
Desired item Description             :BEARING, BALL, # 307
Please guide
thanks,
Fidel

Hai!
Check this note
[631504|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/smb_searchnotes/display.htm?note_langu=E&note_numm=0000631504]
Why so is, we don't knw the DB structure. I won't be a updation of single Field or Table it may have link's.

Updating Standard Cost for an Item in Item Master Data

How do you change the Item Cost field under the Inventory Data tab in Item Master Data if Standard Cost is selected as Valuation Method. This field is greyed out.

Hi ,
If you have an inventory in the warehouse , you cannot change the item price of the standard cost .
So it is greyed out .Once you donot have inventory ,this field becomes active and you can enter the price .
Second option is from Item Revaluation .
Please test it in test environment
Thank you
Bishal

Order multiple quantity in item master data

Hello experts,
I cannot import from Excel file new values for order multiple quantity in item master data (in section planning data). After importing I see that records were imported successfully, but all data which we put in past have been changed to zero and planning method is changed from MRP at None. We have 8.81 PL10 (updating at the end of January).
Do you have any similar experience?
Thank you,
jonmar7

Dear JonMar7,
I have done this in SAP 8.8.1 PL08 using the Import/Export under utilities and seems to be normal. I have only chosen Item and Order Multiple for my template.

Item Master Data

Hi there,
Item descriptions update on master data does not get read into existing sales orders and subsequently when delivery dockets and invoice are generated, they are all not updated. Could the SAP programmer analysts please fix this bug? thanks.
Similarly if item's GL account is set by item group and the item group is changed after an item is processed on sales order, the change in GL posting is not reflected when invoice is subsequently processed. Please also fix this bug, thanks.
cheers

Hi,
I recently noticed #2 in Amy's posting and was a little surprised that the change was not picked up in existing transactions - ex. when moving a SO to an invoice. SBO is considered a real-time product yet that is not 100% accurate given this scenario.
If a company changes their GLAD from one fiscal year to another and an existing transactions (SO/PO) doesn't get invoiced until the new fiscal year, the new GL setup should be used, not the old.
Amy - you would want to submit something like this under the Product Development forum as it is not a bug.
Heather

Item Master Data issue

Hi Experts,
How to set Manager Inventory by Warehouse status on whole Item Master Data at once?
Regards,
Ravi Jha
Edited by: Ravi_Jha_SDN on Jul 22, 2010 8:52 AM

Hello Ravi...
I would strongly urge you to never update any SAP B1 table with the SQL. For several reasons:
1. SAP B1 is a strongly integrated data structure and you might think you are updating the correct field and all will be fine, but there are so many foreign keys in SAP B1 it is unbelievable (you can see this in the bolded names in the Query Generator). For folks having worked with SAP B1 for some time, they will tell you not all foreign keys are bolded and that can cause a bit of a problem. If you update a field and it is used somewhere else, the results can be total havoc.
2. It is SAP policy (due to the above) that, if an SAP B1 table is updated via SQL, it is almost certain they will not help you in case you have a problem requiring a fix through SAP. Even if you try to apply the fix yourself and it goes wrong, you will certainly be in dire straits. Your only recourse is to go back to a previous backup or to do a complete reinstall (and the effort then becomes an enormous manual or Data Transfer Workbench - DTW - effort).
3. It is not hard for SAP to determine how you have updated your tables. I once appeared in court as a forensic expert to settle a dispute between two parties on some changed information in invoicing. I received some help from some SAP folks I know. After sitting in the witness stand for 15 minutes and explaining in layman's terms what I was about to do, the defense called a recess and pleaded guilty to the charges. If I can be that efffective in determining how something was changed, guess how quickly SAP can do it!
4. You will at some time come across the need to do a DTW in the normal buisness life of your system. Learn DTW with small fixes like this "Manage Inventory by Warehouse" so you can get comfortable with it. As Manish points out, folks here will help you. I have seen folks being helped over and over again in this and other forums. I know from personal experience DTW can be a bit difficult, but I am glad I took the time to learn. Also, I have heard in Version 8.8 it is much better.
5. You might be under pressure to get that quick fix and/or update in, but in my experience, once you explain why it is taking a bit longer to the powers that be, the business folks will 99% of the time understand that the best course of action is to take some time and use the SAP DTW or Administration > Data Import/Export function to get fields updated. (NOTE: some companies advertise they have an add-on or tool that can update the fields within SAP policy, but be very careful with this and check their claim completely with partners and SAP - this claim is a lot of times not true).
I do not want to rain on anyone's parade here - it is your choice. And this is only my own personal opinion, but I just want to make sure you understand what the consequences might be pertaining to your decision. That is my intention - nothing more and nothing less...
Regards,
Zal

Item master data table

Hi All ,
I have to update item code .so i want to know how can i update this . and i want to know if it is better to delete item data through SQL Back end .and what tables are linked to item master data table .
Thanks In advance
Areeba Ali

Hi,
you can delete the item code using SQL statement thorugh backend using this sql query e.g. item code is B747400:
delete from dbo.oitm where itemcode = 'B747400'
if you delete it, the db will not consistent and no more support from SAP AG except you create new db and taken the opbal for the db.
The warehouse journal, all created documents and history tables will not consistent anymore after the deletion.
to prove it, you may check using this code:
select itemcode,dscription from oinm where itemcode not in (select itemcode from oitm)
select itemcode from oitw where itemcode not in (select itemcode from oitm)
select itemcode from itm1 where itemcode not in (select itemcode from oitm)
select itemcode from itw1 where itemcode not in (select itemcode from oitm)
All of the tables involve in the above queries will be affected. If the item never have any transactions, you can delete it directly using this step:
1. search the item
2. if the item is available then right click --> select remove
JimM

Unable to update item master data after upgrade

Similar Messages

Maybe you are looking for