Updating satellite system data after Upgrade in Solman

Hi All,
We are using solman 7.01 connected to BI 7.0 system as it's satellite system, We have recently Upgrade our BI system to BI 7.01 version but we do not see its updated version in solman system.
We checked in SMSY it is still showing BI 7.0, we have also done option " Read data from system " but it did not work.
Please suggest to Update my system data in solman.
Regards,
Shivam Mittal

Hi Shivam Mittal
When you clicked in "Read system Data Remote", were the information returned with success in the logs ?
Usually the informations aren't pushed because the READ Rfc's are failing.
If you run job LANDSCAPE FETCH, the information are being collected correctly ?

Similar Messages

Unable to update item master data after upgrade

Greetings,
I have just upgraded from 2005A SP01 PL22 to 8.81 PL05.
After the upgrade, I am unable to update any field in the item master data.
Error message:
In "Warehouses - Setup" window, on "Accounting" tab, choose sales-type revenue account , '_SYS00000001165' [Message 131-52]
I have checked all the warehouses accounting tab and all the revenue account is a sales type account. I have also checked the GL for _SYS00000001165 and it is a COGS GL. After I change its type to "Sales", I am able to update. This shouldn't be the case.
I have also tested creating and update new item master and I have no problem. However, I will have the same problem if i add a new item via duplicating from an old item.
Any advice?
Thank you.

Hi,
Can you also check whether the Item which you are trying to update has Manage G\L Account by as Item, Item group or Warehouse?
If you have checked for the Warehouses, check for the Item Group and at the G\L Determination > Inventory tab as well.
Kind Regards,
Jitin
SAP Business One Forum Team

After Upgrading the SOLMAN to SPS12 the SAP EWA generation to word fail!

Hello,

after Upgrading the SOLMAN system to SPS12 the SAP Early WatchAlert generation to word fail. We use MS Word 2002 SP3!
EarlyWatch Alert Report, EarlyWatch Alert Report with Graphics, all Service Level Reportings -
No report can generate to a word report!
the following Error message appears:

Information:
Document generation failed

After confirming the information poopup, this Error message appears:

Error: Exception occurred (program: , include: , line: 0)., Program CL_DSMOP_HTML_SERVICE_OPEN====CP, Include CL_DSMOP_HTML_SERVICE_OPEN====CM00N, Row 103 
With SPS10 all generations were successfully!
Has anybody an idea?

Thanks a lot!

Regards,
matthias isenburg

Hello,
This is a known problem in the meantime!!!
We use MS Word 2002 SP3! This Version ist too old! The Templates which the Solman want to use are now in MS Word 2003 (minimum)!
The solution is to upgrade MS Word!!!
Best Regards,
Matthias Isenburg

Do I need to update Bootcamp 3.3 after upgrading from Snow Leopard to Mountain Lion?

Do I need to update Bootcamp 3.3 after upgrading directly from Snow Leopard to Mountain Lion? If so, what is the recommended version for my machine?
Other pros and cons we should consider? Not sure what is considered best practice.
We have a mid-2011 iMac (12,1) running Win7 64bit. Concerned about firmware updates not being compatible with Bootcamp 3.3. Firmware updates forThunderbolt port were part of post-Mountain Lion updater install. Not sure what other firmware/boot changes might have been applied to support the new recovery partition, for example. Will the 3.3 windows control panel still work safely?
Win7 still boots OK, at least for now. Backup is current.
I'd like to get the entire machine current again. Bootcamp 5.0 didn't want to download (appeared to hang writing to my external drive, which is otherwise fine). Bootcamp 4.1 refused to install on Win7 (claimed it wasn't for my machine, so I aborted. Downloaded from apple support page directly).
I've searched the forums for this specific question - I see plenty of info for upgrading Bootcamp 4 to 5, but nothing for 3 to 5.
Thanks much in advance,
-b

Appreciate the quick response.
There are basically 2 schools of thought here:
- If it ain't broke, don't fix it.
- Don't fall off the upgrade cycle (apply patches whether you have an issue or not in order to ward off trouble before it happens).
I don't have a specific issue that I'm chasing on the Win7 side right now. I'm attempting to address having fallen off the upgrade cycle by staying on Snow Leopard too long.
I appreciate that the Win7 side under bootcamp is its own thing (upgrades to Mac OS don't cross over or effect the bootcamp partition) - except where firmware upgrades coming out of Mountain Lion change the hardware interface to Win7. Hence my questions.
-b

How we can update the System Date,in java

Hi guys,
can U pls help me...
How we can update the System Date,in java
I need to get the System Date and time continuosly thruogh threads concept.kindly help me
Thanking u in Advance

System.currentTimeMillis() will give you the current
system date and time as a long value.
~I think the OP wants to change the system time not just get the system time.

Lost user data after upgrade bios in G580

HI
I have strange problem with Lenovo G580 with Windows 7. After upgrade bios to newest version and reboot my system start without any user data (no documents, no programs installed earlier), All reboot take short time, about 1-2 minutes. Only username stay the same.
Is it possible that upgrade BIOS was bring recover system to factory?
Does data can I recover somehow?
I need help because there was important databases of company.
Thanks
Dariusz

hi Dariusz,
Welcome to the Lenovo Forums.
That's really strange indeed and very unusual as I've never seen a BIOS update delete a user's data before. Perhaps you're logged-in to a temporary user profile?
To check if you're logged-in to a temp profile, show hidden files and navigate to C:\Users and check if you have an identical username with a dollar sign right next to it and apply this fix:
Fix Corrupt Windows 7 Temporary Profile
For data recovery, check these Free File Recovery Software Programs.
Hope this helps
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Satellite Systems - How far back can SolMan 4.0 go ?

Hi,
Can you please let me know the SAP Note which talks about the BASIS Release requirements of Satellite Systems, in order for SolMan 4.0 to be connected to them ?
I came across SAP Note 661949 - Solution Manager Component systems with Basis Release 4.6B which mentions a few facts, but I am still not clear.
In other words, if someone would like to make use of SolMan to connect to very old SAP systems (3.1H or I for instance), is it still feasible? If so, does it go by Scenario of SolMan to be implemented.
Is it a case where, for Implementation Scenario, Basis Release 4.6B is required whereas for Service Desk, it can go lower (?)
Any pointers will be gratefully acknowledged.
Thanks.
Srini

Hi Ruben,
Thanks for your reply. I was already in that section, somehow, this information was not very clear from Config Guides since it differed by Scenario.
It confirms the data I have tried to compile from a Config Guide PDF and SAP Note:
Satellite System's Requirements for Implementation scenario, using SolMan 4.0, as of SP15
Satellite Systems (Basis Release)
4.6C: SAP_BASIS and SAP_ABA: SP 56 (SP 58, if ChaRM is required)
4.6D: SAP_BASIS and SAP_ABA: SP 29 (SP42, -
6.10: SAP_BASIS and SAP_ABA: SP 18 (SP43, -
6.20: SAP_BASIS and SAP_ABA: SP 00 (SP51, -
6.40: SAP_BASIS and SAP_ABA: SP 00 (SP12, -
7.00: SAP_BASIS and SAP_ABA: SP 00 (SP06, -
Also, for those with SolMan SP below 15, SAP Note 907768 mentions a few other SP levels required in Satellite Systems.
Many thanks again.
Best wishes,
Srini

System Language after upgrade to 10.4.6

Hi everybody,
my PowerBook seems to run nicely after the upgrade, however, the language of the LoginWindow has changed from German (my user's default) to English. The language of my account is German when I'm logged in. Any hints on how to resolve this?
Thanks, Jonas
PS: No, this is not critical... but it's not nice, either.

The update didn't change my system language (Danish), so it can't be a general problem. How did you update your system?
I used the Combo Update¹ and ran Repair Permissions both before and after the update. I always use the Combo version of updates just to be sure. So far (knock on wood) I haven't had any trouble with updates for 10.4
¹) http://www.apple.com/support/downloads/macosx1046comboforppc.html
PowerBook G4 1.25MHz 15 inch Mac OS X (10.4.5) 1.25 GB RAM, 80 GB Harddrive

"Automatic Maintenance Certificate" is not updating satellite systems

Hi,
I want to activate Automatic Maintenance Certificate via solution manager to my satellite systems
Solution Manager is 7.01 at SPS23
Satellite systems are all on Netweaver 7.01 SPS06
Right now, Solution Manager receives automatically the maintenance certificate.
Unfortunately, my satellite systems do not receive it.
on my satellite system (PRD - ECC 6.04), in SDCCN, I see that job "Maintenance Package" shows these messages:
Maintenance Package completed
Updating license data completed from destination [Maintenance Package]
No active master Solution Manager destination maintained. [Maintenance Package]
Updating license data not possible [Maintenance Package]
note that I reviewed completely SAP note 1280664 to no avail.

Hi Daniel,
This is exactly the solution.
I finally also found another solution from http://forums.sdn.sap.com/post!reply.jspa?messageID=9122507#9122507
In managed system, goto SDCCN, browse through the menu options to reach task specific settings and then edit the RFC destination settings.
In RFC settings you get to see RFC of SM system.
Make the SM destination as master destination. Tick the Master checkox.
Thanks for your help.

No data after upgrading DB to 10.1.0.5

We have a Grid Control installation with 2 loadbalanced OMS's (10.2.0.2)pointing to a 2-node RAC DB cluster all running on Linux. We upgraded the repository DB from 10.1.0.4 to 10.1.0.5 and since then if I look at the OMs metrics in "OMS and Repository: Management Services and Repository ", the "Last Upload" time for all the metrics is the same day we did the DB upgrade and all the Management Services and Repository metrics say "No data available". Grid Control seems to otherwise be working OK. Where can I look to try to determine why the OMS metrics are not being updated properly since the DB upgrade?

The agents are fine. I'm not getting any metric data related to the performance of the OMS itself (like Number of Active Agents or Loader Throughput).

[SOLVED] System freeze after upgrade linux-3.12.9-2 to linux-3.13.4-1

After upgrading from kernel 3.12.9 to 3.13.4 (booth x86_64 architecture) i detected system freeze after round about 0.5s of the login screen about 80% of the time.
So i first thought it coulbe be the the ati driver and uninstalled that via livecd/chroot.
But the same thing happens in comand line only mode.
Afterwards i setup at ssh server to get into the maschine if it is still running, but is was also not responding to that.
Downgrading to 3.12.9 solved the issue. In journalctl i could not find any usefull information.
Last edited by schlumpfimsumpf (2014-04-10 19:16:57)

Me wrote:
It is same for me. Wont boot, and crash before I can write mine pass to text screen. I use lts at now.
H/W path Device Class Description
===============================================
system GA-970A-UD3
/0 bus GA-970A-UD3
/0/0 memory 128KiB BIOS
/0/4 processor Athlon
/0/4/a memory 128KiB L1 cache
/0/4/c memory 2MiB L3 cache
/0/b memory 128KiB L1 cache
/0/29 memory 8GiB System Memory
/0/29/0 memory DIMM 1600 MHz (0,6 ns) [empty]
/0/29/1 memory DIMM 1600 MHz (0,6 ns) [empty]
/0/29/2 memory 4GiB DIMM 1600 MHz (0,6 ns)
/0/29/3 memory 4GiB DIMM 1600 MHz (0,6 ns)
/0/100 bridge RD890 PCI to PCI bridge (external gfx0 port B)
/0/100/0.2 generic RD990 I/O Memory Management Unit (IOMMU)
/0/100/2 bridge RD890 PCI to PCI bridge (PCI express gpp port B)
/0/100/2/0 display GF106 [GeForce GTS 450]
/0/100/2/0.1 multimedia GF106 High Definition Audio Controller
/0/100/4 bridge RD890 PCI to PCI bridge (PCI express gpp port D)
/0/100/4/0 bus EJ168 USB 3.0 Host Controller
/0/100/4/0/0 usb3 bus xHCI Host Controller
/0/100/4/0/0/2 storage ADATA USB Flash Drive
/0/100/4/0/1 usb2 bus xHCI Host Controller
/0/100/9 bridge RD890 PCI to PCI bridge (PCI express gpp port H)
/0/100/9/0 eth0 network RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
/0/100/a bridge RD890 PCI to PCI bridge (external gfx1 port A)
/0/100/a/0 bus EJ168 USB 3.0 Host Controller
/0/100/a/0/0 usb8 bus xHCI Host Controller
/0/100/a/0/1 usb7 bus xHCI Host Controller
/0/100/11 storage SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode]
/0/100/12 bus SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
/0/100/12/1 usb6 bus OHCI Host Controller
/0/100/12/1/5 input M Dongle
/0/100/12.2 bus SB7x0/SB8x0/SB9x0 USB EHCI Controller
/0/100/12.2/1 usb1 bus EHCI Host Controller
/0/100/13 bus SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
/0/100/13/1 usb9 bus OHCI Host Controller
/0/100/13/1/1 input USB Receiver
/0/100/13.2 bus SB7x0/SB8x0/SB9x0 USB EHCI Controller
/0/100/13.2/1 usb4 bus EHCI Host Controller
/0/100/14 bus SBx00 SMBus Controller
/0/100/14.2 multimedia SBx00 Azalia (Intel HDA)
/0/100/14.3 bridge SB7x0/SB8x0/SB9x0 LPC host controller
/0/100/14.4 bridge SBx00 PCI to PCI Bridge
/0/100/14.4/7 multimedia SAA7134/SAA7135HL Video Broadcast Decoder
/0/100/14.4/e bus VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller
/0/100/14.5 bus SB7x0/SB8x0/SB9x0 USB OHCI2 Controller
/0/100/14.5/1 usb10 bus OHCI Host Controller
/0/100/15 bridge SB700/SB800/SB900 PCI to PCI bridge (PCIE port 0)
/0/100/16 bus SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
/0/100/16/1 usb11 bus OHCI Host Controller
/0/100/16/1/3 multimedia USB Web Camera
/0/100/16/1/4 multimedia USB Sound Device
/0/100/16.2 bus SB7x0/SB8x0/SB9x0 USB EHCI Controller
/0/100/16.2/1 usb5 bus EHCI Host Controller
/0/101 bridge Family 15h Processor Function 0
/0/102 bridge Family 15h Processor Function 1
/0/103 bridge Family 15h Processor Function 2
/0/104 bridge Family 15h Processor Function 3
/0/105 bridge Family 15h Processor Function 4
/0/106 bridge Family 15h Processor Function 5
/1 scsi6 storage
Working again. I think problem was the partition was full.
Last edited by gyurman (2014-04-13 07:51:22)

Re-loading data after upgrade from OS X 10.4 to OS X 10.5

I cannot install OS X 10.5 over the top of 10.4 because I have upgraded the hard drive in my Macbook. Can I create a bootable version of my hardrive on an external drive and then transfer that data after I upgrade to 10.5? I am wondering if the fact that my bootable drive would have 10.4 on it would cause problems.

Hello ctj19, and a warm welcome to the forums!
Can I create a bootable version of my hardrive on an external drive...
Yes, Get carbon copy cloner to make an exact copy of your old HD to the New one...
http://www.bombich.com/software/ccc.html
... and then transfer that data after I upgrade to 10.5?
Yes, in fact as soon as you install Leopard/10.5 & reboot to it, Migration Assistant will open & ask if you want to import Users, APPs & such from another drive or Mac, choose yes.
I am wondering if the fact that my bootable drive would have 10.4 on it would cause problems.
No problem, in fact you could choose which Drive & which OS you wanted to boot from, & back & forth.
Message was edited by: BDAqua

Unable to update apps on 4s after upgrading to iOS 8.1

Hi,
I am unable to update apps on 4s app store after upgrading to iOS 8.1. signed in on app store & icloud still app upgrading will show circle running but wouldn't start upgrading. location service OFF, tried after changing to location service ON but still won't upgrade. what should be the issue? any correct way to update apps. I have been using for long, never had issue with app store on previous iOS migrations. anyone here can help please.

Hi there Sam R 12,
You may want to try force closing all open apps and resetting the device as an initial troubleshooting step. Take a look at the articles below for more information.
iOS: Force an app to close
Turn your iOS device off and on (restart) and reset
-Griff W.

Satellite L300D BSOD after upgrading to Windows 7

I've had this laptop (Satellite L300D) for a bit more than a year with windows vista (32-bit) running and there have been no problems. However, i just recently upgraded to Windows 7 (x64) and have gotten problems since the first reboot.
On the first reboot after windows 7 installation, the computer simply turned off after the "Starting Windows" screen. Powering it up again took me to system repair where it performed a system restore and i was able to boot successfully again. I thought the problem had something to do with the automatic updates so i disabled them and tried to reboot to see if the problem was fixed. This time, after the "Starting Windows" screen i got a Fatal System Error BSOD. After multiple reboot attempts and multiple system repair attempts (which usually said it failed) it successfully booted up again.
This problem has been going for about 3 weeks now and it's quite irritating. The results from the system repair claims that a "Boot Critical File is Corrupt" but it does boot up eventually after multiple attempts to boot. It also has a habit of turning itself off randomly while running (happens about once or twice a day). So as of now, everytime i try to start my comp it either turns off after the startup screen or gives the BSOD and restarts and the only way to get it working seems to be to keep attempting to boot and hope for a successful boot up (this eventually happens after a few failed attempts).
I did a bit of research on this and came to [this|http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/modelContent.jsp?modelFilter=L300D-ST3501&rpn=PSLC8U&category=&selCategory=3&moid=222 1251&os=&ct=DL&selFamily=1073768663] page. I think that's exactly what my problem is (need to update BIOS) but as i understand the windows install for that is only for xp/2000/vista and i'm unable to use the second option of booting from disc as i get the BSOD before it gets to that point. Should i try the windows install option even though i'm running windows 7 or is there some other way to update the BIOS? Or am i completely off and the problem is with something else?
I wasn't sure what information i should add to this post so if any further information is required please let me know.
Thanks in advance
Edit: Oops, just realised the page i linked doesn't link to exactly what i had opened. I'm talking about the "Critical BIOS updates for 64-bit Windows 7" under "Support Bulletin"
Message was edited by: Jacob27

Hi
First of all it would be interesting to know which BSOD code you get exactly. Can you post this useful information? Normally on the Microsoft Knowledge Base you can find additional informations about the most BSOD codes and so you can start to fix this issue.
BSOD are often related to drivers or RAM/HDD. Latter you can check with special diagnostic tools, Memtest86 for RAM and Drive Fitness Test for HDD. Both tools are freeware and you can find it by using Google. You can download an iso image of them to create a bootable media where you can start the test.
Regarding your BIOS update: I dont know which L300D you have exactly but according the Toshiba website it shows a BIOS update also for Windows 7 64bit. You can try to install it.

System problems after upgrade

now I really cannot understand this upgrade to 5.0.1.. my computer worked just great with the 4.9 version and now I had several iTunes-crashes, problems with the internet connection WLAN(which suddenly occurred after the update) and even a failed installation of the sony ericsson k750 "pc suite" software due to an "unsolved problem" in QT7.
I am really dissapointed, this software is just not ready for public use and my whole system has started to act weird. if someone can help please do so!

hi bo2400!
My notebooks connect to the internet through a Dlink -614+ router. The result was a very slow internet connection and crashes.
okay, i know that for at least some D-link routers, D-link now has instructions at their website on how to get them to work properly with itunes 5.0.x. there's a link through to the D-link website in here (not to your particular model, i believe, but there should be information for your one somewhere on the site):
Roger Cowan1, "BT Broadband (UK) Killed by iTunes 5" #12, 05:25pm Sep 19, 2005 CDT
for the QT 7 conflict ... it definitely doesn't sound like the problem i've been worrying about. unfortunately, you're the first report (that i can recall) of that particular problem here in "Installation & Upgrades".
it might be worth checking/posting in the "Quicktime for Windows" forum in case there's been some troubleshooting done on this over there. (not trying to get rid of you ... just trying to get you on the right radar screens.)
it can help give context to any post over there if you provide a reference link back to this thread. there's instructions on how to do that given in here:
sysop, "Stylize Your Posts (The Editor)", 09:41am Aug 4, 2000 CDT
love, b

Updating satellite system data after Upgrade in Solman

Similar Messages

Maybe you are looking for