Unable to view Business areas even after giving administrator rights

Hi All,
I have been given permission as administrator i.e all privileges are given. All roles have been selected for that particular user. When I tried to access the userid I get a message 'Does not have access to any EULs ...' . But when my administrator logs in with my user id he did not get any error.
The only difference I am able to find is the EUL version. The EUL version from his administrator edition is 4.1.37.00.0. Whereas when I log in with my administrator edition the EUL version is 5i. Will the EUL version make the difference. Or will there be any other reason. If so what is the step to overcome?
thanks in advance.
Prabhu

Hi,
When you can't access to a business area is due to the user hasn't permission for Database tables. You can have two identical Discoverer users and one can access to a business area and the other no.
If you want to access to a business area first you must check if you have select and create session permission for the database tables. If so, is when you must check rights in Discoverer.
Alex.

Similar Messages

Presentation catalog are listing on subject area even after removal

Presentation catalog are listing on subject area even after removal of catalog on RPD.
I have restarted oc4J server too

Please make sure that you have saved the repository or not.
And then restart both the services i.e Presentation server & OBI Server
Regards
Visweswar
Edited by: Mopur on May 26, 2011 10:44 PM

Protect The Cells in the Excel Sheet Even After giving the password.

Hi All,
I need to protect the cells in the report even after unprotecting the sheet after giving password.
That is, i have used some excel formulas in some cells, these cells are to be protected.
In Reports using EVDRE all the cells are getting, "Locked" option selected in the Protection tab by default. Even if we change that Option and refresh the sheet Locked is getting selected again.
So once we Protect the sheet using password all cells are getting locked. But once we remove password all cells are free to enter.
I want the user of the Sheet to use only certain columns in the Sheet. and all the other columns should not be user editable.
Please help me out in solving this issue.
Thanks in Advance,
Regards,
G.Vijaya Kumar

Hi Vijaya,
I tested in my test environment and even after refresh , the range cells are still editable, they didnt get locked. I did the following:
1. Selected the range or column in Excel, then Tools - Protection - Allow users to edit range. I selected the range and gave the password.
2. Next I protected the complete sheet.
3. Now entire sheet is protected. Now again I selected the range in which I want to edit, first time it will ask for password which you gave for the range. So I gave and I was able to edit the cells.
4. I selected other cells and was not able to edit it so they are still locked.
5. I tried to refresh the report , and then I selected the range cells to edit and still I was able to edit it. Those cells didnt get locked.
So did you do the same things?
Thanks.

Showing I'd has not been reviewed in iTunes..and payment has been declined even after giving credit card.

Apple I'd created has been showing not reviewed in iTunes.. And the payment has been declined after giving credit details... Not sure about it..

Hello Abiez,
Thanks for the question, and welcome to Apple Support Communities.
I understand you are having issues adding payment information to your account. In my experience, this usually occurs due to two common reasons (though there may be more):
If your account information does not match your credit card, you may get a message stating "The credit card was declined."
To expand on the above, your billing name or address may not match the address listed on your credit card statement. Any discrepancy in punctuation, abbreviation, or capitalization can cause errors, which might prevent you from purchasing from the iTunes Store. If you moved, or if your zip code changed recently, ask your credit card company to make sure their records are up to date and match exactly what you are entering as your billing information.
The iTunes Store will place a minimal authorization hold on your credit card each time that you update your account information (equal to around 1 USD). The authorization hold is not a charge. The authorization hold is placed on your credit card to make sure that the information provided matches the information on file with your financial institution. The authorization hold will not be displayed in your iTunes Store purchase history.
If there are insufficient funds in the account to cover the authorization hold, you may experience issues with adding payment information.
For more information, see the following helpful resources:
iTunes Store: How iTunes Store purchases are billed
http://support.apple.com/kb/HT5582
iTunes Store: Changing account information
http://support.apple.com/kb/HT1918
iTunes Store: My credit card's security code or zip code does not match my bank's records
http://support.apple.com/kb/TS1646
Thanks,
Matt M.

Administration Edition- View Business Areas

Can anyone tell me if it is possible to install the Oracle discoverer Administration edition for a user, but only with query/view rights on Business Areas ?.
The user should not be able do make changes , but only to view : eg : folder links, custom folder queries, properties etc.
Or is there another way of getting the information regarding the setup for a certain Business Area ?

Hi,
It depends what version of Discoverer you are using. If you are using a later version (10g) then you can give the user administration privilege but no privilege to change the EUL (e.g. format business area). Then when the user connects to Disco Administrator they get read only access to the EUL.
If you are using a previous version then you will have to either write a report off the EUL tables that gives them all the information they need (The Oracle provided EUL Definition Business gives most of this information), or implement your own read only constraints using database triggers.
Hope that helps,
Rod West

I recently changed the password for my apple id and now my apple tv keeps asking me to turn on home sharing even after giving it the new id password

I change my Apple ID password and now my apple tv will not recognize my itunes library even after updating my password for home sharing on both the computer and the apple tv. the apple tv keeps asking me to turn on home sharing in itunes which has been done repeatedly. ive even tried resetting my apple tv.

Hello there, ozibw.
The following Knowledge Base article offers some great steps for troubleshooting Home Sharing:
Troubleshooting Home Sharing
http://support.apple.com/kb/ts2972
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Installation of SAP Business One client and required administration rights

Dear community,
I would like to kindly ask you for your feedback on the installation of SAP Business One client and its patches on end-user computers.
The pain points I have heard so far are the following:
- The installation of SAP Business One client and its patches has to be started by a user with administrator rights. As far as I know (and please correct me if I am wrong), this is also required in case of installation of any other software.
- End users usually do not have administrator rights and therefore the SAP Business One clients have to be manually upgraded by administrator. This is time consuming (and therefore costly) activity.
We are considering to design a new solution which would overcome the above limitations.
I would like to confirm with you if my understanding is correct:
Question 1:
Is it a common situation that the end-users of SAP Business One client do not have administrator rights and therefore cannot install the patches of SAP Business One client by themselves?
If yes, how do you resolve this currently?
Question 2:
Do you use Microsoft System Center Configuration Manager or Active Directory (or any other 3rd party solution) to automatically distribute software packages and updates to client PCs at your customers?
Question 3:
If the SAP Business One client installation (and its patches) is delivered as MSI package with silent installation capability, would you be able to automate the deployment of B1 client updates to client PC using the abovementioned technologies? Or can you still see some obstacles?
Thank you
Best regards
Jan Ruzarovsky
SAP Business One Product Management

Dear all,
Thank you very much for your comments, very helpful!
@Marco - SAP Business One 8.8 client currently does not support the silent installation / upgrade. However we are currently considering this requirement and we would like to deliver it as soon as possible.
We are currently considering several possible designs. One of them is as follows:
1. A new SAP Business One Updater Service will be installed on each client workstation.
It will be a windows service installed and running under a local system account.
2. The updater service will check regularly if there are any new patches of SAP Business One client or add-ons uploaded to a configured shared directory.
3. If a new patch is found in the shared directory, the updater service will SILENTLY install the new patch (add-ons, SAP Business One) on the client workstation.
The service would be able to install patches even if nobody is logged in.
Questions:
If we consider the above design, there are a few open topics:
1. During the upgrade of the SAP Business One server, the client patches (and SAP add-on patches, partner add-ons) would be placed to a SHARED directory instead of into SBO-Common (as it is implemented currently).
- Does this have any impact on your tools, processes or add-ons?
2. SAP Business One upgrade wizard will put the latest patch of SAP Business One client into a configured shared directory. The shared directory will have to be read-only for everybody in the network to avoid that the valid installation files are replaced by malware or virus infected files
- Can you configure such a shared directory?
From customer perspective, if a new patch is put into the shared directory, the updater service can behave as follows:
1. Manually initiated upgrade of the client
Example: Customer starts the old (not upgraded) SAP Business One client. The client will inform him/her that a new patch has been found and it has to be installed in order to continue working with the client. After customer clicks "Yes", the upgrader service starts the silent installation of the client and informs customer about the progress. Once the upgrade is finished, the upgraded SAP Business One client will be started automatically.
2. Automatic update:
- Update the client automatically (e.g. overnight) if customer is not working with SAP Business One
- If SAP Business One client is running, ask customer if he/she wishes to upgrade the client now or to delay the upgrade by X minutes.
Question: Which of the above two scenarios would you and your customers prefer?
If the upgrade is fully silent, automated and handled by the upgrader service, Is it acceptable for customers to trigger the installation manually and wait till the client is upgraded? Or would they prefer to have the client updated for them e.g. overnight so they can immediately start to work?
Best regards
Jan
Edited by: Jan Ruzarovsky on Sep 29, 2010 9:37 AM

Business Objects XI 3.1 Administrator rights

Hi:
Could someone tell me or point in the right direction for determining if any, or which Business Objects desktop application may require the user to be part of the sytem administrator group? Currently running BO 6.5 Supervisor and Recipient Manager modules, among others but we will soon be upgrading to Business Objects XI 3.1 - I know we need administrator rights to install so I'm onl asking about running the applications - thanks

Hi Darlynn,
administrator rights (on OS side) are not required in order to run most BOBJ dekstop applications (e.g Universe Designer, rich WebI client, DeskI client). Still you have to take care eventually of firewall issues if you have a firewall between your server and your clients.
Please make also sure that the users have write access to the temp directories used by the tools e.g. Universe designer.
You may have some issues with the Import Wizard though since it requires write access to it's installation directory (this is where its temp directory resides). That was at least the case in XI R2.
The Import Wizard is not every user's tool though.
Regards,
Stratos

Why the Fibre uplink ports are down state even after giving no shutdown command at the interface

Hi
My Predecessors brought 2 CISCO 3750 switches and implemented LACP on these core switches. Due to looping in the network the Fibre uplink ports GigabitEthernet1/1/3 and GigabitEthernet2/1/3 are down (I think these uplink ports are mirrored in the LACP concept)
Please see below from the configuration.
I logged into the core switch and went to this particular interface GigabitEthernet1/1/3 and I gave the following command and still the port is in the down state after I gave no shutdown command. Do I need to give the same no shutdown command at interface GigabitEthernet2/1/3 as well ?
Switch-Core1(config) interface GigabitEthernet1/1/3
Switch-Core1(config-if)#no shutdown
Switch-Core1(config-if)#
Please see below After no shutdown command given still these 2 Gigabit fibre uplink ports are down.
GigabitEthernet1/0/20 unassigned YES unset up up
GigabitEthernet1/0/21 unassigned YES unset down down
GigabitEthernet1/0/22 unassigned YES unset down down
GigabitEthernet1/0/23 unassigned YES unset down down
GigabitEthernet1/0/24 unassigned YES unset up up
GigabitEthernet1/1/1 unassigned YES unset up up
GigabitEthernet1/1/2 unassigned YES unset up up
GigabitEthernet1/1/3 unassigned YES unset down down
GigabitEthernet1/1/4 unassigned YES unset up up
Te1/1/1 unassigned YES unset down down
Te1/1/2 unassigned YES unset down down
GigabitEthernet2/0/1 unassigned YES unset up up
GigabitEthernet2/0/2 unassigned YES unset up up
GigabitEthernet2/0/3 unassigned YES unset up up
GigabitEthernet2/0/4 unassigned YES unset down down
GigabitEthernet2/0/5 unassigned YES unset up up
GigabitEthernet2/0/6 unassigned YES unset down down
GigabitEthernet2/0/7 unassigned YES unset down down
GigabitEthernet2/0/8 unassigned YES unset up up
GigabitEthernet2/0/9 unassigned YES unset up up
GigabitEthernet2/0/10 unassigned YES unset down down
GigabitEthernet2/0/11 unassigned YES unset down down
GigabitEthernet2/0/12 unassigned YES unset down down
GigabitEthernet2/0/13 unassigned YES unset down down
GigabitEthernet2/0/14 unassigned YES unset up up
GigabitEthernet2/0/15 unassigned YES unset up up
GigabitEthernet2/0/16 unassigned YES unset up up
GigabitEthernet2/0/17 unassigned YES unset up up
GigabitEthernet2/0/18 unassigned YES unset up up
GigabitEthernet2/0/19 unassigned YES unset down down
GigabitEthernet2/0/20 unassigned YES unset up up
GigabitEthernet2/0/21 unassigned YES unset down down
GigabitEthernet2/0/22 unassigned YES unset up up
GigabitEthernet2/0/23 unassigned YES unset down down
GigabitEthernet2/0/24 unassigned YES unset up up
GigabitEthernet2/1/1 unassigned YES unset up up
GigabitEthernet2/1/2 unassigned YES unset up up
GigabitEthernet2/1/3 unassigned YES unset down down
GigabitEthernet2/1/4 unassigned YES unset up up
Te2/1/1 unassigned YES unset down down
Te2/1/2 unassigned YES unset down down
Port-channel1 unassigned YES unset down down
Port-channel2 unassigned YES unset down down
Please let me know if I am doing something wrong .Please post me some tutorial to sort this.

It is possible you are overloading that little 4215. If that is the case you should also be seeing "missed packet percentage" messages in your events.
How much traffic is your 4215 getting? Those sensors will start to drop packets for inspection at about 30 Mb/s.
- Bob

Unable to view project in RHS8 after publishing

I am using RH8 to publish my project to RHS8. We are using Tomcat/IIS, but after going through the integration to IIS, I feel I'm not yet to done with the integration there. But for now, I am only trying to publish and view the project in Tomcat. I was finally able to publish the project successfully to http://<servername>:8080/<context>/server. However when I view http://localhost:8080/<context> or http://localhost:8080/<context>/server all I still see is the default Robohelp Server page, saying to publish my files here and for more information to check the documentation in the publishing tool. Can anyone help shed some light as to how I can get the project viewable on the server?

Hi, bjones91 and welcome to the Forums.
When you published the project, did you publish to a particular "Area". Otherwise "general" is the default. Here are some things to check.
First, if you haven't tried this already, go to the Web Admin application by using this URL
http://localhost:8080/robohelp/admin
Log in and click on the "Projects" button along the left panel. Hopefully you will see your project listed.
If you do see your projects listed, you can click "View Project" and it will open in the browser.
If you would like to test the site directly from your browser, use this syntax for viewing the actual sites:
This shows the URL for a project titled EmployeeCare to an Area called "HR"
http://localhost:8080/robohelp/server?prj=EmployeeCare&area=HR
This shows the URL for a project titled Marketing to the Default "Area" which is named "general"
http://localhost:8080/robohelp/server?prj=Marketing&area=general
If you don't see your projects listed:
If not, then, there is definitely something wrong. Colum McAndrew and I have seen situations where a simple "illegal" character in a filename will prevent projects from showing up because the Tomcat server is very fussy about legal names. (So, no *?)(&^%$#@! or Spaces in your Folder or Filenames. A dash - or underscore _ is OK. But good rule of thumb is to keep Folder/Filenames alphanumeric and that goes for anything on the web, not just RoboHelp projects
Of course there may be something else afoot. But, try these and get back to us if you are still having problems.
John Daigle
Adobe Certified RoboHelp and Captivate Instructor
Evergreen, Colorado
www.showmethedemo.com

REcieved BT Bill even after giving one month of No...

Hi,
I know BT are desperate to keep customers, but when someone cancels, it becomes dishonest and i would have thought illegal for them to keep billing them.
I cancelled my BT subscription by giving 1 month's notice. I was not in any contract.
They explained to me that I have to pay 30GBP for cancellation if the new tenant doesnt take up th line. I agreed that I dont know when the new tenant will move in and if he doesnt take the same line then I will pay the cancellation ...but please close the account. Which the guy on that day confirmed to me as being processed.
For some reason though, I received an email today whereby I have been billed for next month cycle for both Phone and Broadband.
I am out of property and don't live there anymore and being billed for a service that I will no longer use and have already infomed BT for the stopping.
I called up BT to enquire. 5 or 6 phone calls later (from call center Guys in India .each of which I have to hold for at least 10 mins, and one of which the operator hung up on me! and each call costing many ££s) I was advised that there is no record for my notice in the systems. I told them a date then she managed to dig out the call (after 5 mins of hold) that I indeed made a call on the date I told but there is no record. After asking for the recording of the call and escalation to manager ...She became nice however and she said she will raise a complaint on my behalf and the manager will listen to call and will call back .
I got the call from Manager (Call Center India) on time mentioned and the manager repeats the same thing that he has gone thrugh the recording but he can't listen that I requested any cancellation. Although he confirmed the part conversation that I told them that I am moving out a new tenant will come in.
Asking for the details of conversation recording to be emailed to me He tells me that I need to pay 10pounds more as it's DAta protection (My own data and my own conversation) and gave me a postal address to send the cheque and request for the recordings.
This is highly unprofessional of BT (maybe call center guys can't understand ENGLISH) as I know why I called BT on X day and Y time... and what I requested. BT doesnt offer free phone-pleasure service :-) whereby I would call them hold the line for 30 mins to say I am moving house.. please keep on billing me :-)
It's very stupid of them telling me that I indeed called up but for What...????
Well I am clearly not getting anywhere on the phone, so I am posting on this forum in the hope that someone can steer me in the right direction to get this resolved please.
Or maybe on weekend Everything goes to Call centers in India who dont know how to deal with matters and just repeat a Script in fornt of them.
Is the only way to resolve, or is there a department that listens and doesn't leave you with your lunch break wasted and blood pressure raised?
Thanks in advance...
Sush
Solved!
Go to Solution.

I have asked a moderator to provide assistance, they will post an invite on this thread.
They are the only BT employees on this forum, and are a UK based team of people, who take personal ownership of your problem.
Once you get a reply, make sure that you are logged into the forum, then click on their name, you will see a screen like this. Click on the link as shown below.
Please do not send them a personal message, as they cannot deal with service issues that way.
For your own security, do not post any personal details, on this forum. That includes any tracking number you are give.
They will respond either by phone or e-mail, when its your turn in the queue.
Please use the tracked e-mail, to reply, not via the forum. Thanks
This is the form you should see when you click on the link. If you do not see this form, then you have selected the wrong link.
When you submit the form, you will receive an enquiry number, so please keep a note of it
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Unable to extend TEMP segment even after adding fresh temp files

Hi All,
I have a huge table with rows nearly 2 million. When this table is moved to another tablespace, the command failed giving the following error:
ORA-01652: unable to extend temp segment by 128 in tablespace XYZ
To overcome this error, an additional temp file was added with huge size. Unfortunately, the same error appeared again when the table was tried to move to another tablespace. I wonder if the new temp file was not recognized by database, so tried to see how many files belong to temporary tablespace, but the query listed the newly added temp file also.
What could be the possible reason for this error? Suggestions or clues are most welcome.
Thanks,
...

The temp segment is for the table that is being moved.
Oracle creates a temporary segment when doing a move. If the target tablespace has enough space, the move succeeds and the temp segment gets converted to a Table segment. Else, if the move fails because of lack of space (the temp segment itself unable to grow), then the temp segment is dropped on failure.
Thus, in a
alter table ABC move tablespace MY_TBS;or
the target tablespace MY_TBS should have enough space for ABC. While Oracle is building the copy of ABC in MY_TBS, it is being built as a temporary segment. If the copy succeeds, the temporary segment is renamed as a Table segment 'ABC' and the original table segment 'ABC' is dropped.
This behaviour also happens when you do an ALTER TABLE .. MOVE ; into the same tablespace that it is existing in. The new copy of the table is a temporary sgement till the copy succeeds.

Optimizer not using index even after giving the hint

Hi All,
I am wondering why Optimixzer is not using the index in the below query
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Prod
SQL> select column_expression
2 from ALL_IND_EXPRESSIONS
3 where table_name like 'GTXN_DTL_V1'
4 and index_name = 'IDX_TXN11_V1';
COLUMN_EXPRESSION
TO_DATE("BOOKING_DATE",'YYYYMMDD')
SQL> select num_rows from all_tables
2 where table_name like 'GTXN_DTL_V1';
NUM_ROWS
29020867
SQL> explain plan for select * from gtxn_dtl_v1 where to_date(booking_date,'yyyymmdd') = to_date('030109','DDMMRR');
Explained.
SQL> select * from table(dbms_xplan.display);
PLAN_TABLE_OUTPUT
Plan hash value: 3140624094
| Id | Operation         | Name        | Rows | Bytes | Cost (%CPU)| Time     |
|   0 | SELECT STATEMENT |             | 55489 |    15M|   215K (4)| 00:43:08 |
|* 1 | TABLE ACCESS FULL| GTXN_DTL_V1 | 55489 |    15M|   215K (4)| 00:43:08 |
Predicate Information (identified by operation id):
   1 - filter(TO_DATE("BOOKING_DATE",'yyyymmdd')=TO_DATE('030109','DDMMRR
14 rows selected.
--Giving Hint..
SQL> explain plan for select /*+ index(gtxn_dtl_v1 IDX_TXN11_V1) */ *
2 from gtxn_dtl_v1
3 where to_date(booking_date,'yyyymmdd') = to_date('030109','DDMMRR')
4 /
Explained.
SQL> select * from table(dbms_xplan.display);
PLAN_TABLE_OUTPUT
Plan hash value: 3140624094
| Id | Operation         | Name        | Rows | Bytes | Cost (%CPU)| Time     |
|   0 | SELECT STATEMENT |             | 55489 |    15M|   215K (4)| 00:43:08 |
|* 1 | TABLE ACCESS FULL| GTXN_DTL_V1 | 55489 |    15M|   215K (4)| 00:43:08 |
Predicate Information (identified by operation id):
   1 - filter(TO_DATE("BOOKING_DATE",'yyyymmdd')=TO_DATE('030109','DDMMRR
14 rows selected.Please suggest.
Thanks in advance,
Jeneesh

porzer wrote:
Hi!
Why are you using the to_date ont the booking_date column? Is it a varchar2 column, what type is it.
Because if it's a varchar2 column you could simply use
select * from gtxn_dtl_v1 where booking_date = '20090103';
So you wouldn't even need a function based index.
On the other hand if it's a date you shouldn't do a to_date as well.
Best regards,
PPThat is not the original qury used in production. I am investigating on the prformance of the below query.
select txn.account_number,to_number(txn.amount_lcy) txn_amt,to_date(booking_date,'yyyymmdd') TXN_DATE,
      sal.latest_sal,sal.sal_date,customer_name,employer_name,
       decode(COMMUNICATION_TYPE_1,'MOBILE',COMMUNICATION_NO_1,decode(COMMUNICATION_TYPE_2,'MOBILE',COMMUNICATION_NO_2)) mob,
       txn.CURRENCY, CHEQUE_NUMBER,trans_dets,trans_reference,target,teller_id,acc.category,acc.inactive_marker,acc.posting_restrict,cus.sector,cus.industry
from coreadmin.Gtxn_dtl_v1 txn,
               (select account_number,round(to_number(nvl(amount_lcy,0)),2) latest_sal,TXN_DATE sal_date,rr
                from
                  (select to_date(booking_date,'yyyymmdd') TXN_DATE,batch_id,account_number,amount_lcy
                         ,row_number() over (partition by account_number order by to_date(booking_date,'yyyymmdd') desc NULLS LAST,batch_id desc nulls last) rr,
                         CURRENCY, CHEQUE_NUMBER,trans_dets,trans_reference
                    from coreadmin.Gtxn_dtl_v1
                    where transaction_code = '204'
                and to_number(amount_lcy) > 0)
                    where rr = 1
                 ) sal,customers_live cus,accounts_live acc
where to_date(booking_date,'yyyymmdd') between to_date('030109','DDMMRR') and to_date('030209','DDMMRR')
and txn.account_number = sal.account_number
and txn.CUSTOMER_ID = cus.CUSTOMER_number(+)
and acc.id = sal.account_number
and target in ('30','31','32')Edited by: jeneesh on Mar 25, 2009 12:38 PM
Corrected the query.
The column is of VARCHAR2 type. This is because, the table is loaded, through sqlldr, every day from flat files generated form GLOBUS banking system. Column is kept as VARCHAR2 to minimize the loading issues.

Unable to access Business Rules Facts after refreshing XML Facts

I have created a business rule using an xml schema to generate the XML Facts. Then I created a Decision Function to call a Ruleset to process the information in the XML Facts. This decision function has input and ouput parameters from the XML Facts.
The decision function is used inside a BPEL Process, by defining the Dictionary has the created business, defined the Service has de Decision Service. After this configuration I'm able to define the Input Facts and Output Facts from and to a variable in the bpel process. Using the Decision Fact Map window I define the input and output to the exposed Business Rule Facts. This works just fine. The BPEL runs and the Rules are correctly used.
When I change my xml schema to add more elements and complex types I use the "Reload XML Facts From Updated Schemas" option available in the bussiness rule. After this operation I will no longer have access to the Bussiness Rule Facts in the Decision Fact Map window. So I'm no longer able to call the decision function.
Yet the business rule has no problems and i have tested using a fuction to call the Decision Function.
Is this a bug or a feature?
I'm using Oracle 11g with the SOA Composite Editor 11.1.1.0.0.52.19.

Problem solved. There was an element in the xml schema that had nillable = true. Because of this the XML Fact for that element would no longer be available in the BPEL Process. Removing the nillable and generating the XML Facts again solved the missing variable problem.

Unable to view Business Rules in Planning application

Hi All,
After changing the password of hypadmin i am not able to view all the business rules in my planning application and EAs console business rules wizard also doesn't shown planning when i am trying to add location.
Please suggest how to do password change in Hyperion 11.1.2.
Regards,
Vasu

Hi,
If it's admin id(configuration id), then you need to configure all the components which is registered with shared services after changing your password.
For example, EAS configuration, only re-configure for -> Register with shared services.
Like the same way we need to do for all components with new password & for planning apps, need to edit datasource with new password.
Thanks.

Unable to view Business areas even after giving administrator rights

Similar Messages

Maybe you are looking for