Uncreated filter is shown in report.

Hi Gurus!!!!
Greetings to all.
I am working on query in support box.
When I execute query it will as for input, I provide input and execute.
It will say "No applicable data", but there is data in InfoProvider as per my input in query execution.
When I check thequery deeply, I fould one filter in analyser which is not defined/created in the query designer.
So, please let me know how I can investigate that.
Thanks in advance
Peter..

Hi Arun!
There is not such SP issue exists I suppose.
Can any one please help me out..
Peter

Similar Messages

  • R12: How to filter Open Item Revaluation Report based on GL Date

    Hi,
    Anybody know how to filter Open Item Revaluation Report based on GL Date from and GL Date to in R12?
    Since we just upgraded from 11.5.10 to 12.1.3 and found we cannot filter those report for specific date. It shown all data included the old data from 8 years ago also.
    We need to run the report only for specific date only. Please share with me if anyone know about this.
    Thanks.

    Pl do not post duplicates - R12: How to filter Open Item Revaluation Report based on GL Date

  • Issue in using presentation variable as filter condition in the reports

    Hi,
    I have an issue in using presentation variable as filter condition in my reports the details are as follows:
    Details :
    We want to implement the Max and Min variables through Presentation variables only.we do not want to implement it through session variables in this case.
    We have two variables MIN and MAX to be used as Presentation Variables,for a column of the report (which is a quantity),so that the user wants to see the data for this column within a particular range.i.e the Min and the Max.This part has been implemented well . The issue is when the user wants to see the full data.In that case we will not pass any values to these two Presentation Variable or in other words we are not restricting the report data so we are not passing any value to the variables,this is when the report is throwing the error. we want to leave this variables blank in that case.but this is giving error.
    Please suggest how can I overcome this issue.
    Thanks in Advance.
    Regards,
    Praveen

    i think you have to use guided navigation for this. create two reports first is the one you are having currently and second is the one in which remove the presentation variable from the column formula. i.e. the same report with no aggregation applied.
    Now create a dummy report and make it return value only when the presentation variable value is not equal to max or min. guide the report to navigate between the first and second report based on the result of the dummy report.

  • Filter Based on other report not working

    Hi Gurus,
    I am using OBIEE 10g.
    I have a Dashboard page in that i have a prompt and 2 reports,(A, B reports). Report B is using the same columns as prompt where as report A not.
    Report A has columns which hold the same data as report B, so i thougt to pass the values based on Report B column using the filter based on other report. I am able to complete it succssfuly but Report A is not having amount of data that i was excepting. When i started investigating i found out that the column which i am using in the prompt and report B have values ( NEW, OLD, NULL) report A able to take the values NEW and OLD but the NULL values are not passing to report A. In report B it is taking null value as it has filter as prompted.
    Is it any way to have the values (NEW, OLD, NULL) in report A?
    Thanks in Advance.
    Regards
    Ali

    Hi Deep,
    Thanks for taking time to answer my question.
    I have to display null. If i Mask with something then i dont get proper data in report A, couse in the table it is null.
    Thanks
    Ali

  • The GR & IR lines unable to shown in report ,but it does has in PO history

    Hi,
    Tcode: y_d35_87000552 [GR/IR Report for Stock Valuation/BB6 Reporting (with summary listing)]
    parameter:
    company code: HC02
    GR date: 01.01.07 to till 30.09.07
    Issue: The line items captured in the reports was not the complete one as some of the purchasing lines have been excluded.
    When trying to drill down via tcode ME23N for one of the missing transaction in the said reports (PO#SMLMFO2002), noticed that the purchasing doc was having GR and IR process in the year of 2007 as shown in 'purchasing order history' tab and all have generated the MM & FI entries.
    Conclusion: The GR & IR lines unable to shown in report from Tcode: y_d35_87000552 but it does has GR & IR entries at PO level's view.
    Appreciate if you can assist urgently. Thank you.
    Regards;
    Tata

    check in MB5S trx

  • How can I pass a filter value to another report?

    I'm using a filter within a formula of a field. For example: (FILTER("Facts - Actuals Ledger"."Actual" USING ("Time"."Fiscal Quarter" = '2012 Q 2'))-FILTER("Facts - Actuals Ledger"."Actual" USING ("Time"."Fiscal Quarter" = '2012 Q 1')))*-1
    What the above is doing is calculating the variance between Q1 and Q2. My issue is when I drill on this value to a more detailed report, it's combining the Q1 and Q2 values, instead of showing the difference. I'm trying to avoid having to hard code the drill report and was wondering if there's any way to pass the calculated FILTER to the other report?
    Thanks.

    Hi,
    I presume that you want to show the the difference between a prompted quarter and its previous quarter?
    If so, I would use the Ago Time Series Function to create a new logical measure for prior quarter e.g.
    ago("Facts - Actuals Ledger"."Actual", "Time"."Quarter", 1)
    Note that the function should contain the time dimension level for quarter. The 1 at the end is the offset e.g. 1 quarter ago. This measure will now return the prior quarter value for whatever quarter is prompted.
    Create a prompt for your report for Fiiscal Quarter, and set a filter in the report for the same column with an operator of Is Prompted.
    Add the base measure ("Facts - Actuals Ledger"."Actual") and your new Ago measure to the report. When you prompt the report with a quarter, these two columns will show the Actual amount for the promted quarter and the previous quarter respectively. Now all you need to do is subtract one from the other.
    Now, when you drill to another report, the filter value of the prompted quarter will be passed across. Apply the same logic to define measures in the drill report, receiving the prompted quarter only.
    Note that you can also use Time Series Functions in the column formula when creating the analysis.
    Please mark if helpful / correct,
    Andy
    www.project.eu.com

  • Getting active filter conditions from interactive reports

    I have been having trouble with how to properly get the filter conditions that a user has applied to an interactive report. I have tried to get at this information using the Apex defined view APEX_APPLICATION_PAGE_IR_COND. However, the problem I am running into is if the user ends their session without first removing their filter conditions, those conditions remain in this view the next time (and any future times) the report is accessed. I can not seem to determine how to tell which filter conditions are actually active in the report. Any help would be greatly appreciated.

    I've done several tests, and the results I'm getting are not like that, if it were there would be no problem. The exact steps I'm doing is setting an arbitrary filter on an interactive report, and then logging out. When I log back in the view still shows those filter conditions, but no records are filtered on the actual report. I've tried this on two separate installations of apex (one 3.1, the other 3.2) and the results are the same. Is this irregular? Or has anyone else found a workaround for this.

  • Create Filter on an Interactive Report in a Link

    Hello,
    Here is info on my environment:
    Database: 10.2.0.1.0
    O/S: Windows XP
    APEX: v3.2.1
    I am trying to use the IR<operator>_<target column alias> feature to filter the linked Interactive Report. The feature does not seem to work. Does this feature work on a 10g database?
    Background:
    I am building the application (AnyCo Corp) described in the _2 Day + Application Express Developer’s Guide_ . On page 4-27 the section titled "_Linking a Column Value to Another Page_" describes linking from the Department report to the Employee report with the Column Link item IR_DEPARTMENT_ID. The link did not work, however.
    The included APEX Users Guide discusses this feature. The path to the relevant section is: Home > Adding Application Components > Creating Reports > Editing Interactive Reports > Linking to Interactive Reports. The Guide describes the string IR<operator>_<target column alias> with lots of operators.
    This is a neat feature. Unfortunately, no matter how I try to use it, it does not work. What am I doing wrong?
    Leon

    Check out these blog postings from the APEX Dev Team:
    http://anthonyrayner.blogspot.com/2008/07/dynamic-date-filtering-in-interactive.html
    http://dpeake.blogspot.com/2008/03/advanced-interactive-reports.html

  • I am currently getting finder error screen saying "Quartz-filter plugin" error, Please report to apple. Can anyone please help me find a resolution for this error?

    I am currently getting finder error screen saying "Quartz-filter plugin" error, Please report to apple. Can anyone please help me find a resolution for this error?

    If it were me I would schedule an appointment at the store where you bought it and meet with the Manager of the store in person. Print this post and bring it with you along with your iMac.
    And change the password on your Apple ID and then see if there are in purchases in your account that you did not make. If there are then someone did get your ID and password. If not someone got your Credit Card information from somewhere and used it.

  • [Forum FAQ] How do I change default values shown in Report Delivery Options?

    Introduction
    Some users want to change default values shown in Report Delivery Options when creating standard subscriptions. Someone might want to always Cc the report to a specified user without sending the report URL. So they want to display those default values display
    automatically when creating standard subscriptions like below.
    Solution
    To achieve this goal, please embed JavaScript code into the SubscriptionProperties.aspx file to change those default values (By default, the file’s location is: <Installation directory>\Reporting Services\ReportManager\Pages\SubcriptionProperties.aspx).
    The example below will show how to set default values for “Cc” field and “Include Link” field.
    Before coding, pleas find out the corresponding HTML tags of the two fields in the browser using IE Developer Tools.
    Get “Cc” field with its corresponding HTML tag
    Get “Include Link” field with its corresponding HTML tag
    Embed such a code snippet at the end of the existing code within the SubcriptionProperties.aspx file
    <script runat="server">   
    protected void Page_Load(object sender, EventArgs e)
        Page.ClientScript.RegisterStartupScript(typeof(Page),"MyScript", "var cc = document.getElementById('CcEmailAddressesID');cc.value = '[email protected]';var IncludeLink = document.getElementById('ui_cbIncludeLink');IncludeLink.checked
    = false;",true);}
    </script>
    Create a new subscription to check the default values shown in Report Delivery Options 
    Applies to
    Reporting Services 2005
    Reporting Services 2008
    Reporting Services 2008 R2
    Reporting Services 2012
    Reporting Services 2014
    Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

    Thanks,
    Is this a supported scenario, or does it use unsupported features?
    For example, can we call exec [ReportServer].dbo.AddEvent @EventType='TimedSubscription', @EventData='b64ce7ec-d598-45cd-bbc2-ea202e0c129d'
    in a supported way?
    Thanks! Josh

  • QSUF (Query string url filter) and SQL Server reporting services report viewer parameters

    Hi,
    this is my issue:
    I have a SQL Server reporting services web part on a page with a report with 1 parameter, lets say it's a client list
    Then i have a QSUF that will be used to filter the clients list through the URL
    However, once i connect the filter and the report viewer web part, the parameter goes away and is no longer accessible
    I'd like to somehow keep the parameter visible, in case there is no parameter sent through the URL, i would like the user to be able to choose a client from the parameter drop down list
    I saw that there is a "send empty if no values are passed" option, but i can't seem to get this working properly and i don't know if this option will make the parameter visible again
    Any help would be appreciated
    Thanks.

    Hi,
    According to your post, my understanding is that the query string url filter web part not worked well with SQL server reproting services web part.
    Did you use the Wiki page layout in your environment?
    You can change the page to a web part page, then check whether it work.
    There is a similar thread for your reference.
    http://social.msdn.microsoft.com/Forums/sharepoint/en-US/4d7584e3-8e1a-48bf-9346-32f8cb480dd1/query-string-url-filter-web-part?forum=sharepointgeneralprevious
    Thanks & Regards,
    Jason
    Jason Guo
    TechNet Community Support

  • Deletion of filter components from Bex Report in BI 7.0 via back end.

    Hi,
    I want to delete 2 filter field components from the BI 7.0 report via back end. Im using the Tcode RSZDELETE and giving the variable element UID, Inforprovide name, query tech name. But when i excute it says empty selection.
    Other than this is there any way to delete query components at back end???
    Regards,
    Nisha

    Thanks for the reply!
    This is to delete the variable created??
    My requirement is query specific , the restriction on the IO , ie the variable to be removed via back end.. that means deletion from that report..
    hope my statement is clear enough to give me some light .
    Thanks
    Nisha

  • Filter criteria in ALV report not working

    Hi,
    In ALV report , when i click on filter button , it does not filter the report according to the filtered criteria. this happens in the cases where the selection criteria is a lengthy field. when i debug after the filter criteria it goes into standard function.
    i am using REUSE_ALV_GRID_DISPLAY
    is there any way in which i can correct this?
    thanks,
    Amit
    null

    chk this useful thread
    Re: ALV problem (with filter use)

  • Remove Filter Type from interactive report

    Hi
    is it possible to remove the Filter Type option from an interactive report?
    We don't want to give users the option to select the filter type.
    Many thanks
    Paul

    Hi Paul,
    I don't think you can remove that option. You can hide it. There are several ways to do this, but they would involve css styling. In your page's HTML Header setting, add in:
    &lt;style type="text/css"&gt;
    label[for="apexir_FILTER_TYPE"] {display:none}
    #apexir_FILTER_TYPE.radio_group {display:none}
    &lt;/style&gt;Note that older versions of IE will not handle the first style, but that's just the label. The actual radio buttons are hidden by the second style
    Andy

  • Filter problem in the report

    Experts,
    We have a problem with Filter on Costcenter taking very very long time . When we click on Filter button  on Cost center after executing a BW report, then a new window opens and nothing happens after that with a blank white screen in the filter window.  We have tried so many options to improve performance but only one thing worked out as a work around.
    I have deleted enteried in the master data table using TC SE14 and then reloaded master data. Then filter on this working now with in 1 min. But we have process chains running every day loading Master data .Once these process chains finish again when we filter on Cost center on the next day, now the problem still exists , takes long time to for filter window to open up. Is there any way to delete master data entries delete automatically. Any advice appreciated .
    Thanks

    Hi Kiran,
    Is that u are doing the master data full upload?
    Try to do delta loads.
    If it is the client specific. Create a process chain to delete the same master data contents. and schedule the process chain to run daily night or just before the master data loads happen, so that it will not affect the runtime. Else have to delete the same manually.
    Hope this helps u.
    regards,
    Kishore.

Maybe you are looking for